Document Header Text in BKPF

Hello
   In BKPF the document header text is case-sentive.If we search for eg. test* then it would return all the texts starting with test(in small) and if we search for TEST* it would return the texts starting with TEST and not test also.I have a select option(Document Header Text) on the selection screen and irrespective of the case it should select all the texts which i give the search for.For e.g if I give test* then it should return texts starting with (test as well as TEST).How can this be achieved?
Thanks.

Hi,
There is no simple solution to this. Either you build up a select-option yourself with all possible combinations of "test", "Test", "TEST" etc., or you would select all BKPF records in an internal table (usually not a good idea since this is normally a DB-table with many entries) and translate the BKTXT field to upper case and then select your records.
Regards,
John.

Similar Messages

  • Transfer document header text from billing document to FI document

    Dear all,
    Where do I specify that the document header text out of the billing document should be transferred to the corresponding FI document?
    Currently, the FI document header text (BKPF-BKTXT) remeans blank after transfer from billing document. We need this field to be filled in, but I haven't found how to have this filled in.
    In copy control from sales doc to billing doc, there is the possibility to transfer the Reference number & Assignment, but nothing about document header texts.
    Some say that it would only be possible via coding, but anybody has any idea if it might be possible via standard SAP?
    Many thanks!
    Best regards

    Hi,
    We also had a bit same requirement, which is to copy the billing header text to FI item text (BSEG-SGTXT). The solution we took is to use FI Substitution (t-code GGB1), so that every time a FI document created from SD... the substitution reads the billing header text and put it in the FI item text. I think the same method could be used for FI header text (BKPF-BKTXT). Below is the solution for your reference.
    Prerequisite:
    Document Type = 'RV' AND Reference <> '' AND
    ( Transaction code = 'VF01' OR Transaction code = 'VF02' OR
    Transaction code = 'VF03' )
    Substitution:
    Using exit which coding is as below.
    *&      Form  u900
          Copy Billing Header Text to SGTXT
         -->P_SGTXT    FI Item Text
    FORM u900 USING p_sgtxt TYPE bseg-sgtxt.
      DATA: lv_name TYPE thead-tdname,
            lt_line TYPE STANDARD TABLE OF tline,
            lw_line TYPE tline.
      lv_name = bkpf-xblnr.
      CALL FUNCTION 'READ_TEXT'
        EXPORTING
          id                      = 'Z001'
          language                = sy-langu
          name                    = lv_name
          object                  = 'VBBK'
        TABLES
          lines                   = lt_line[]
        EXCEPTIONS
          id                      = 1
          language                = 2
          name                    = 3
          not_found               = 4
          object                  = 5
          reference_check         = 6
          wrong_access_to_archive = 7
          OTHERS                  = 8.
      IF sy-subrc EQ 0.
        READ TABLE lt_line
          INTO lw_line
          INDEX 1.
      In Billing Header Text, the sign '&' (ampersand) is automatically
      added some characters so it becomes '<(>&<)>'.
      The logic below is to fix that issue.
        REPLACE ALL OCCURRENCES OF '<(>' IN lw_line-tdline WITH space.
        REPLACE ALL OCCURRENCES OF '<)>' IN lw_line-tdline WITH space.
        p_sgtxt = lw_line-tdline.
      ENDIF.
    ENDFORM.
    Regards,
    Teddy Kurniawan

  • FI document Header text formation using tcode F110 (Automatic payment )

    After completion of tcode F110 i.e. completion of a cycle of automatic payment transaction
    Then we can see header text of created FI document number by using tcode fb03.
    But the header text created through F110 has a concatenation of Run Date and Identification.
    There is problem that how it can happen?
    I have gone through all program code; there is no such direct coding for concatenation of header text, rather concatenate happens at different level of coding.
    We can create FI document using FB01 also and there is choice to enter Header text manually as well as we can select it using F4 help.
    Any one has any IDEA regarding this?
    Thanks,
    Suyog

    Hi
    I'm not sure it's helpful answer. The code below shows the way to change FI document header text (BKPF-BKTXT).
    tables: bkdf, bkpf, bsec, bsed, bseg, bset.
    constants:  c_bukrs type bkpf-bukrs value '11',
                c_belnr type bkpf-belnr value '1900000001',
                c_gjahr type bkpf-gjahr value '2011'.
    data: t_bkdf  type standard table of bkdf with header line,
          t_bkpf  type standard table of bkpf with header line,
          t_bsec  type standard table of bsec with header line,
          t_bsed  type standard table of bsed with header line,
          t_bseg  type standard table of bseg with header line,
          t_bset  type standard table of bset with header line.
    start-of-selection.
    * BKDF
      select *
        from bkdf
        into table t_bkdf
        where bukrs eq c_bukrs and
              belnr eq c_belnr and
              gjahr eq c_gjahr.
    * BKPF
      select *
        from bkpf
        into table t_bkpf
        where bukrs eq c_bukrs and
              belnr eq c_belnr and
              gjahr eq c_gjahr.
      loop at t_bkpf.
        concatenate t_bkpf-bktxt '-R'
        into t_bkpf-bktxt.
        modify t_bkpf.
      endloop.
    * BSEC
      select *
        from bsec
        into table t_bsec
        where bukrs eq c_bukrs and
              belnr eq c_belnr and
              gjahr eq c_gjahr.
    * BSED
      select *
        from bsed
        into table t_bsed
        where bukrs eq c_bukrs and
              belnr eq c_belnr and
              gjahr eq c_gjahr.
    * BSEG
      select *
        from bseg
        into table t_bseg
        where bukrs eq c_bukrs and
              belnr eq c_belnr and
              gjahr eq c_gjahr.
    * BSET
      select *
        from bset
        into table t_bset
        where bukrs eq c_bukrs and
              belnr eq c_belnr and
              gjahr eq c_gjahr.
    end-of-selection.
      call function 'CHANGE_DOCUMENT'
        tables
          t_bkdf           = t_bkdf
          t_bkpf           = t_bkpf
          t_bsec           = t_bsec
          t_bsed           = t_bsed
          t_bseg           = t_bseg
          t_bset           = t_bset
    *   T_BSEG_ADD       =
    hope it's help.
    Peerasit

  • Document header text in Tcode FBl3n

    hello
    Plz help me regarding this issue.
    Our fico consultants demanded to display the document header text in the tcode FBL1n,FBL3n and FBL5n
    So through SPRO by using this path Financial Accounting (new)->General ledger Accounting->Master Data->G/L Acounts -> line items ->Define Special fields for line item Display.
    In this i made the new entry BKPF BKTXT ,
    Now after this field start coming in the above tcodes by setting the layout but the problem is that data inside is not coming and when i go to details the data is there.
    I am not gettting problem to get the data also.
    Now it is showing extra column with header Document header text but it is not showing the data inside it.
    and similar if i doing for someother field both things are coming data and field also.
    WHy this problem for document header text only.
    Plz let me know and give the solutions as soon as possible.
    Thanks a lot.

    Hi,
    You can use READ_TEXT to retreive header text.
    READ_TEXT provides a text for the application program in the specified work areas.
    The function module reads the desired text from the text file, the text memory, or the archive. You must fully specify the text using OBJECT, NAME, ID, and LANGUAGE. An internal work area can hold only one text; therefore, generic specifications are not allowed with these options.
    After successful reading, the system places header information and text lines into the work areas specified with HEADER and LINES.
    You have to used the READ_TEXT functions to read the SAP long text. e.g. Sales Order, Purchase Order Item text etc.
    To check your long text header, go into the long text. Click Goto -> Header
    This will give you OBJECT, NAME, ID, and LANGUAGE.
    Pass them in the FM, you will get the header text that you want.
    Also go through the below link:
    http://help.sap.com/saphelp_40b/helpdata/en/d6/0db8c8494511d182b70000e829fbfe/content.htm
    Hope this will help.
    Thanks&Regards,
    Naresh kumar.

  • FB02 does not allow to change Document Header Text

    Hi,
    We are upgrading to ECC 6.00. In T Code FB02 we are not able to change the document header text (BKPF-BKTXT). This feild is grayed out.
    We have done the necessary configuration in Document Change Rules, Document Header- allowing BKPF-BKTXT for change.
    We can see the entry in Table V_TBAER. Please help me to solve this problem. We need to have this feild available for change.
    Regards
    Santosh Hegde

    hi Santosh,
    I understand that you can see the entry (BKPFT-BKTXT) in V_TBAER, but there are two small things to consider: if you doubleclick the line (in V_TBAER), there are two checkboxes, where the first one has to be ticked (field is changable), if the second checkbox is ticked as well, it means the field can be changed if the posting period is open. pls. check just in case...
    if it does not help, I would suggest to open an OSS call about this problem (I did search on my own, but no luck), could be some special SAP error.
    ec

  • Change Accounting Document header text

    I want to change the Accounting document header text (BKPF-BKTXT).
    I dont want to use Call transaction for this.
    Please tell me if there is any function module or BAPI available?

    >
    lavanya koduganti wrote:
    > I want to change the Accounting document header text (BKPF-BKTXT).
    Do you want to change the A/c'ing doc. header text for an existing doc? I think that CALL TRANSACTION would be easier. Why do you think otherwise?
    Any specific reason for this?
    BR,
    Suhas

  • Document header text in Fb03

    Hi all,
    In ml81n transaction there is a field called external number which is stored in ESSR table.
    Now when i go to mrrl and display the fi document i will be taken to Fb03 transaction. If i click the documnet header i will get another window which has documen header text. Now in this document header text i need to display the external number that was used in ml81n transaction.
    I tried with enhancement points at some points. but it was not helpful.
    Hope somebody would reply to this post.
    Thanks in advance
    Veda
    Helpful answers would definitely rewarded.

    Hi,
    You can use READ_TEXT to retreive header text.
    READ_TEXT provides a text for the application program in the specified work areas.
    The function module reads the desired text from the text file, the text memory, or the archive. You must fully specify the text using OBJECT, NAME, ID, and LANGUAGE. An internal work area can hold only one text; therefore, generic specifications are not allowed with these options.
    After successful reading, the system places header information and text lines into the work areas specified with HEADER and LINES.
    You have to used the READ_TEXT functions to read the SAP long text. e.g. Sales Order, Purchase Order Item text etc.
    To check your long text header, go into the long text. Click Goto -> Header
    This will give you OBJECT, NAME, ID, and LANGUAGE.
    Pass them in the FM, you will get the header text that you want.
    Also go through the below link:
    http://help.sap.com/saphelp_40b/helpdata/en/d6/0db8c8494511d182b70000e829fbfe/content.htm
    Hope this will help.
    Thanks&Regards,
    Naresh kumar.

  • Unable to view document header text in MB51

    When creating a stock transport order in MB1B we are entering information into a field labeled "document header text". Then when running MB51 in the column labelled document header text nothing appears unless we enter under a specific movement type.  If we use another movement type the text does not transfer.
    Please assist.
    Thank you.

    Try using SELECT_TEXT in place of READ_TEXT.
    Hope this helps.
    Regards
    vinayak

  • Populate document header text in SES by bapi BAPI_ENTRYSHEET_CREATE

    Hi,
    I am using BAPI BAPI_ENTRYSHEET_CREATE to create a service entry sheet. But I am not able to populate the document header text (bktxt) in acceptance tab in service entry sheet header in ML81N.
    Can anybody help me what I need to pass to this BAPI in order to populate this field.
    Thanks,
    Mainak

    Hey Mainak,
    I am aware that the question was posted by you long back, but I am replying so that other readers probably can benefit from the answer below -
    I faced the similar issue recently in one of the projects. The solution that i have opted is as below -
    1. I leveraged the changing parameter 'ESSR' work area of the user exit 'EXIT_SAPLMLSR_010'. This user exit is internally called via BAPI_ENTRYSHEET_CREATE.
    2. You can export the value of 'ESSR-BKTXT' field to memory ID from the calling program and import it within this user exit and pass it to changing parameter ESSR.
    Hope this helps to other readers!
    - Thanks,
    Urvi.

  • Document number, reference, document header text

    my name is venkat in f-02 there are 3 fields. 1) document number 2) reference 3) document header text what purpose we use with example

    HI,
    1. Accounting Document Number
    The document number is the key the system uses to access the accounting document.
    The document number is unique per company code and fiscal year. When entering an accounting document, you can specify the number manually or it can be determined by the system from a pre-defined area (number range).
    The relevant area of the document numbers (number range) is determined in each company code per document type.
    2. Reference Document Number
    Definition
    The reference document number can contain the document number of the customer/vendor. However it may contain a different value.
    Use
    The reference document number is used as a search criterion when displaying or changing documents. In correspondence, the reference document number is sometimes printed in place of the document number.
    Procedure
    Enter the number specified by the business partner. If the document was created in-house and you do not know the business partner document number, you can copy the document number into the reference number field by entering "*".
    3. Document Header Text
    The document header text contains explanations or notes which apply to the document as a whole, that is, not only for certain line items.
    reg
    Madhu M

  • How can i add Document Header Text for s_alr_87012357

    Hi Gurus
    How can i add Document Header Text for  s_alr_87012357(Advance Return for Tax on Sales/Purchases).do i need change the standard program or is there any alternate to do this please  help me  out.

    i found it .its in output list and i did change the layout settings.thanks

  • Authorization at sales document header text type

    Hi All,
    Is it possible to have authority check at the sales document header text type ?
    My basic requirement is to gray few text types at sales document header level in t-codes VA01 and VA02.
    Appreciate your response.
    Thanks,
    Nagaraju

    Hi raj,
       U can configure Text Determination in T.code: <b>VOTXN</b>
    it follows the condition technique
    1. Define Condition Table
    2. Define Access Sequence
    3. Define Text Types
    4. Define Text procedure
    5. Activate to sales document types
    there u can achieve ur purpose.
    Reward if it helps.
    Regards,
    Anbu

  • Document header text

    Dear experts
    what is the standard procedure to create document header text.
    thanks
    dipti

    Hai
    Document Header Text
    The document header text contains explanations or notes which apply to the document as a whole, that is, not only for certain line items.
    There is no any standard proceedure to create the document header text.
    Am i answered to the question..if any doubts get back again.
    Regards
    Raghavendra.M
    SAP-Practice

  • Fbcj "document header text"

    hi experts.
    i am using "fbcj" transaction code but i need an information about "document header text" area .
    when i save a document with fbcj transaction , this document's "document header text" is always empty. i have to enter some numbers in this area before the save document. how can i fix it?

    Hi,
    Please refer this link :
    is it possible to configure the reference-document date as mandatory -FBCJ
    Regards,
    Pramitha.

  • Delivery document header text

    Hi Guys,
    Which table we can find the delivery document header text detatils?, Can any one please suggest.
    Text object should be VBBK.
    Thanks in advance.

    you can find the details from STXH (header information )and STXL - Text information(non readable format)
    using READ_TEXT you can find the information.
    TDNAME = DELIVERYNUMBER(likp-vbeln)
    TDOBJECT = VBBK for header VBBP for Item
    TDID depends on the text which you are using.
    you can get all the information from Text editior itself in the Delivery.

Maybe you are looking for

  • New MacBook fast enough for FCP?

    Will FC Studio run okay on a MacBook 2.16 with 2 gb ram?

  • Windows 7 - can't use ipod Touch

    I recently installed Widnows 7 on my Pc and have not been able to use my touch with it since. When I first plugged my ipod touch in it was recognized as a camera. I had this issue with Vista when I first bought my touch. The fix I used back then did

  • Check Box functionally lost when visiblity is turned off then back on

    Please pardon my attempt to ask a coherent question for I am new to Oracle Forms! I have created a canvas using the layout wizard against an Oracle table. I needed to provide the means to select mulitple records for DELETION; so, I created a check bo

  • Blue Ray Disk drive compatibility with DVD S Pro, Mac Pro

    Ok, I'll make this an official question, where might I find info on BDR drive compatibility with DVD S Pro, Mac Pro, etc? I'm a little surprised that there doesn't seem to be much info available. I can always use my Pioneer BDR-202 with a windows box

  • Quality Results entry

    Hi , I am working on 11.5.10.2 Quality Module. We have Quality results entry form is available in Quality Module and at the same time we can enter quality results during PO receipt or WO completion. If we enter quality results in quality module for a