Document interchange error

I am trying to export to an inx file, from cs3 to cs2, files also to be repurposed for the translation tool 'Trados", when I try to re-open the file in the lower version I am getting an error and it will not open.
The attribute 'alts' is already used in element 'txsr'
we are running Intels macs with blacklining extension mainly with CS3 but we do have copies of CS4 and CS2, this is only happening to random files it is not consistant at all.
Any ideas will be greatly appreciated, I have tried the adobe support, but no luck there.
Thanks

The previous post wqhich I deleted was incorrect. There is no special plugin required (though CS2 would need to be fully patched). However, since you are unable to open the .iinx file in the same version that created it, I suspect some other problem.
It's not clear to be, by the way, what version of ID was used to make the .inx file. You said you CS2 and CS4. CS2 cannot open CS4 .inx files without first editing the file in a text editor to cheat on the version, and even then there are no guarantees.
You also mentioned a plugin with which I am not familiar. Have you tried idasbling it and doing the export?

Similar Messages

  • Follow up to document with error

    Hi
    is it possible to create follow up document to document with error?
    CRM blocks it.
    eg. I have sales order in CRM from R/3 without person responsible in Partners tab.
    I would like to create Correction document.
    How can I do it?
    Regards
    Radek

    not found

  • I have Microsoft Word for Mac 2011, version 14.3.1.  When I try to open a document, an error occurs, says file type is "blocked from opening in this version."  This was NOT immediately after a version update.  Any ideas?  Thank you.

    I have Microsoft Word for Mac 2011, version 14.3.1.  When I try to open a document, an error occurs, says file type is "blocked from opening in this version."  This was NOT immediately after a version update.  Any ideas?  Thank you.

    Take a look here:
    http://support.microsoft.com/kb/953266
    If that doesn't help, I'd suggest you take up the question in Microsoft's own forums or with Microsoft support.
    Regards.

  • How can I turn off document.write error in PTWC 2.0?

    Hi everyone. I have an application that (unfortunately) avoids processing on the server and instead pushes a lot of JavaScript w/ document.write statements to the portal. Also, the code can't be changed so that it does server-side processing. I understand that document.write calls in JavaScript may not appear on the first load, that said...
    Does anyone out there know how to turn off the document.write error message that appears when a portlet uses PTWC 2.0?
    -Greg

    Apologies, I could have been clearer. Somehow, someone has managed to enable a template for one of the document libraries. When I click 'New' in the document library it opens a template Word document with writing on it already. I want to turn this off so
    that when I click 'New' I am give the default option to open a new Word Excel PowerPoint or OneNote document.
    I checked in advanced settings for the particular library and have tried turning off Allow management of content types but this does not change anything. 
     

  • Portal Invalid at the top level of the document.  Error processing resource...

    We installed WebLogic Portal.  We were able to bring up the webpage while we were configured on port 80.  As soon as we wired the portal for port 443, it would not display page.  Error:   Invalid at the top level of the document. Error processing resource...
    We are on a VM with Redhat Linux 5.  Oracle Weblogic portal 10.3.5
    Has anyone had this issue in the past and was able to resolve it?

    Did you upgrade your Portal to 10.1.4? Are you using the Web Cache port # or the HTTP Server port #? You can get this error message if you use the HTTP Server port # on Portal 10.1.4.

  • While saving the sales document .this error is coming.

    Is there any body to help it out .......
    While saving the document this error is coming
    **Financial document: No financial document assigned**

    Dear dinesh
    It seems the field "Financial doc.no" is made as mandatory in VA01.  Also if I am right, you are trying to create an export sale order which is against L/C.
    To create L/C, go to VX11N, give the required datas and save.  While saving, system will generate a reference.  Make a note of this reference and now go to VA01, give the required datas and select header Billing tab where you can find a field "Financial doc.no.".  Assign the above reference here and now save.
    thanks
    G. Lakshmipathi

  • "The stylesheet does not contain a document element" error

    Hi,
    I'm using Hyperion Financial Management 11.1.1.3
    I successfully created intercompany transactions but when I select the "auto match" to perform the matching process, the running task page ensure that the process is completed successfully. However, when I press "log" I found the following error:
    Error Number:-2147467259
    Error Description:The stylesheet does not contain a document element. The stylesheet may be empty, or it may not be a well-formed XML document.
    Error Source:msxml6.dll
    Page On which Error Occurred:/hfm/Administration/ShowRunningTaskLog.asp
    My environment is win server 2003 on a VM and EPM 11.1.1.3
    Thank you and best regards,
    Ahmed.

    Hi taku,
    Yes I've solved my issue.
    Firstly, make sure that the entities and accounts used in the Intercompany Transaction are allowed for ICP in the metadata file by setting the attribute "IsICP=Y" to yes.
    Then, after you press the "Match" button, wait until the process finished and don't open the log. Just close the running task page, after the status showed that it is completed, and open the "process IC transactions" page again you will find the square sign becomes green which means that the transactions are matched.
    I followed the following example on Oracle by Example [http://www.oracle.com/technetwork/middleware/financial-management/tutorials/mictrans-094190.html?ssSourceSiteId=otncn]
    It's about "Managing Intercompany Transactions in Financial Management".
    I wish you can solve your issue soon.
    Best wishes,
    Ahmed.

  • Error:Adobe document services error: SOAP Runtime Exception: CSoapException

    Dear All,
    While executing an adobe form I am facing the following error:
    Adobe document services error: SOAP Runtime Exception: CSoapExceptionTransport :
    Can you please suggest how the error can be rectified?
    Thanks and regards,
    Atanu
    Edited by: Atanu Dey on Feb 18, 2008 5:31 PM

    Hi, For solving this do one thing:
    The problem is In ECC the service AdobeDocumentServicesSec was set up in SM59 but nothing was configured for SSL. So you have to change this to:
    AdobeDocumentServicesSec.
    Thanks
    please reward points

  • My operating system is Windows XP SP3.  I have Adobe 11.0.08 installed.  I cannot print a pdf file/document. Error message - AeroRd32.exe - Unable To Locate Component  -  "Application failed to start because lxdautil.dll not found."  Any suggestions?

    My operating system is Windows XP SP3.  I have Adobe 11.0.08 installed.  I cannot print a pdf file/document. Error message - AeroRd32.exe - Unable To Locate Component  -  "Application failed to start because lxdautil.dll not found."  Any suggestions?

    That DLL is part of your printer driver; reinstall or update the device driver for your printer, and the message should go away.

  • Itunes document manager pro will not open a document with .cwk extension. It will catch the document then error message states that it cannot open document. Can anyone tell me what Im doing wrong?

    Itunes document manager pro will not open a document with .cwk extension. It will catch the document then error message states that it cannot open document. Can anyone tell me what Im doing wrong?

    Forgive my ignorance but I have never hear of iTunes Document Manager Pro. If you mean Document Manager Pro, i was able to find that. Back to your problem, have you tried opening one of those files in the iOS iWorks apps? Form the quick read that I did about this, .cwk files can be opened by Pages, Numbers or Keynote, depending on what type of document that it is and those files can be read by Document Manager Pro, after properly saving them. I don't see that you can go directly from the .cwk file in Document Manager Pro without converting them first.
    I took a very quick look at the app, so I may be a missing something about its capability.

  • "Cannot open document. (Error: INF) Deski docs in WEBI not opening

    Our users are receiving the following error within WEBI when oppening DESKI documents. "Cannot open document. (Error: INF). WEBI files open fine, DESKI files do not.
    I want to break something.
    Any ideas? Many thanks

    We are also having the same issue - personal (i.e. my favorite) Webi documents saved prior to today cause the error: Value Cannot be Null (Error:INF). New Webi documents or documents in the corporate repository are functioning properly.
    Any ideas on how to fix issue is greatly appreciated.
    Thank you

  • Document Contains Errors - Approval not possible

    Hi,
    We are having issue in our Invoice Workflow.
    When ever the approver is trying to approve the document, he is getting the error message "Document Contains Errors -> Approval not possible".
    We have verified the document and check for error messages and found the below error messages on the Document.
    E BBP_PD              047 Posting period 006 2011 is not open.
    The document was submitted some time in the first week of December and as part of AP process the posting period will be closed during the first week of every month.  This is a common business case and why is it stopping from posting the doc?
    FYI..this Invoice is posted against the WBS element.
    Pls give some insight on this and how to address the issue.
    Regards,
    Satya

    Hi,
    The posting date in the invoice is referring to the past period which is closed.You will have to change the invoice posting date to current period date and then process.
    Regards,
    Sanjeev

  • "Could not complete your request because it is not a valid Photoshop document." Error

    Hey,
    I've been getting the "Could not complete your request because it is not a valid Photoshop document." error in one of my PSDs.
    Here are just some notes:
    The original file type is .psd, not a tiff whatsoever, and the file extension is purely myfilename.psd, not other random weird name
    PSD file (in case you need it): https://www.mediafire.com/?1xkz2aki87p3kqc
    I did not update my Photoshop or anything
    It'd be great if solutions were suggested, I need this PSD file recovered desperately for a project.
    Thanks

    Very well. Try this with your Mac:
    Open "new.psd" in Preview
    File > Save
    new.psd becomes new.png  If the extension was correct, Preview would not have changed it.
    it now opens in Photoshop  You can download it here.  ("Save image As...)
    Simply put, you had the wrong extension.

  • Service entry sheet reversal document (Status: Error in process) List repor

    Hi,
    I have a requirement, to have or develop report which gives service entry sheet reversal documents (Status: Error in process),
    while investigation i found below options (not exactly meeting my requirement)
    1) Display and Process Confirmations Centrally >Document Category>reverse documents
    which giving all reversed document list (need only error list) and it is giving only my puchasign group list (need all purchasing group list)
    2) I can execute PPB_PD with BUS2203>status>I1019
    is there any way/possible option that i can execute a report of reversal service entry sheets which ststus :error in process"
    Thanks,
    Jai

    Hi Christian,
    Thanks for your reply.
    But this is what has happened. No the SES was not deleted in ECC before the confirmation was deleted in SRM. Our users don't have access to ECC T-codes.
    Also I have checked the time at which the cancellation was created and everything is in sync.
    How can i change the status of SES from 'Error in process' to 'posted in backend'?
    Please advise
    Thanks

  • Document Contains Errors. Approval is not Possible.

    I have a SC approval that errored out when coming back to SRM. We run RBBP_OFFLINE_EVAL program periodically throughout the day to pick up offline approvals from users. In the spool list, I see this message:
    Document Contains Errors. Approval is not Possible. And the system gives me the WI ID, SC # and the object type BUS2121.
    I've never seen such an error before. The document here...is it referring to the approval email itself? We instruct our users to not edit the approval email in any way. They just have to click on the approval link and click on Send in Outlook. I don't know if the document it's referring to is the SC or the approval email.
    Can anyone help?
    SN

    Hi,
    You are right. This error is the issue. To answer your other question why this message was not raised earlier;the problem could be that at the time of sc creation, there might be sufficient budget. But because your shopping cart was in approval for some time, it is possible that some more shopping carts have been raised with the same WBS and got approved. This would reduce the overall budget available. When the shopping cart is approved, one more check is done by the system and this time there was no sufficient budget.Hence the error is displayed. Only option for you now would be to ask FI people to increase budget or resubmit the cart by changing the value of the shopping cart.
    Regards,
    Sanjeev

Maybe you are looking for

  • How to reslove this warning?

    warning: [path] bad path element "C:\jdk1.5.0\lib\htmlparser.jar": no such file or directory KaoqinRecord.java:105: warning: [unchecked] unchecked conversion found : java.util.Set required: java.util.Set<java.lang.String> Set<String> set = h.keySet()

  • Have to fill to delete in layer mask

    I make a layer mask and then make a marque selection and press delete. Nothing happens. I then fill the selected area and it deletes it. How do I reverse this? I'm sure there is something simple that I missing. Ian Version PS CS3

  • Report server configuration

    Hi I want to configure report server in Oracle10gAS(10.1.2)in LINUX 4 so that I can run reports through browser, which were compiled in Reports2.5 . So kindly help me through details informations , means - what are the files to be configured and how?

  • Itunes 11.03 screen refresh problems

    Lately on iTunes 11.03, MacBook Pro (early 2011) screen refreshes every time a new song is played, even using internet radio player.  Problem not seen on any other application, even 3rd party internet radio players.

  • Using Universe Desing Tool COM SDK with Powershell

    Hello, I would like to use Universe Design Tool COM SDK in Powershell (instead of Excel and VBA). I was trying to import Designer.dll in Powershell but getting error: PS C:\Windows\system32> [Reflection.Assembly]::LoadFrom("C:\Program Files (x86)\SAP