Document number is not opening in My Requested Products application.

Dear All,
We are using SAP ECC 6.0 and EHP 6.
we are using standard SSP.In NWBC, the  application My requested Products (/SRMERP/WDA_I_SC_FS_ESS ) -> in shopping cart number there is one tab Follow on documents that has a Document number link.
If we click on that document number a new browser window opens in IE it gives an err internet explorer cannot open a page and in Chrome it says(R3 error)  " an error occured".
Please advice.
Thanks,
Aashima

The same thing happened to me, yesterday. I gave up and went back to using the original CC today. I created a new site and out of the blue MUSE CC 2014 started opening on its own. Then, I closed the original and it wouldn't close. So, I docked the shortcut to CC 2014 and restarted. After restarting I only clicked the alias to cc 2014 and it opened fine.
I was glad it fixed itself but the old CC was open before it started automatically the new CC 2014. Maybe bumping around this way will get you the same results.  Good luck.

Similar Messages

  • Error on Purchase Order - Document number 45* not within defined interval

    Hi All,
    PLEASE HELP ME or guide me in the right direction.
    I am faced with a somewhat unique case in our enviroment. Some background first.
    Back in 2000 when we upgraded from Walker to SAP, a number of Purchase orders had to be migrated, one of them is the order i am struggling with. Back then very little validations were built in, resulting in a Local Order being incorrectly created as a International Order but against a local currency.
    Now this ordered is still being reflected as open in our system. When attempting to change the order by activating the 'Delivery Complete indicator", we get an error "use only foreign currency" This is due to the fact that validations against Document Type and Currency was created in 2003 and are in full operation now. It is hard coded thus i can not remove this easily.
    Now when attempting to get around this by changing the Document Type to a Local Purchase order or trying to delete a line, we get the error below.
    "Document number 45* not within defined interval"
    Number ranges do come to mind based on the error description, however, Local Orders have a number range of 45, International Orders have a number range of 47. In this case, the order is created as a International Order BUT the number range is 45*, again, due to a lack of validations/incorrect config back in 2000
    Do any of you know a possible solution to such a problem.
    Regards,
    Jody Ponnusami.

    The validation of document type and currency is not standard, and if this validation cannot be deactivated, then you will have to resort to making changes in debug mode. Put a breakpoint at the relevant check and force it to accept the current combination.
    The second option is to update EKPO table manually using SE16N. Set the delivery completed indicator to X.

  • Error in allocating RG23D document number Interval not found Number object

    Dear
    Expert
    Error in allocating RG23D document number Interval not found Number object J_1IRG23D
    I tried the solution given in the forum but its not working,
    Pls help me out.
    Thanks and Regards
    Deepankar

    Hi,
    As a know that this is a problem of number range and I mentioned the same(SNUM> given the object and maintain the number range of this fiscal year but it didnt work also searched in the forum but didnt got any other solution so posted the issue.
    hope now its clear.
    Thanks and regards
    Deepankar

  • Help please I can not openening because: Error opening the document,  Acrobat can not open the file while printing another document

    Help, I ca not opening the file, beacause the mac says Error opening the document, Acrobat can not open the while printing another document

    Thank you very much for your replies Taggert_77 & swmtgoet_x :D
    Taggert77_: I have never used NetBeans. I only installed it in the bundle as I had read on another post that somehow installing the bundle magically helped another user with the same problem (he didn't know why it worked after that either).
    Before XP SP3 I was able to execute .jar file through cmd prompt. Now I am not.
    This file is executable, grab it and you will see. Here is a screen shot (program in front is FlashFXP, behind is the cmd prompt and what should happen):http://www.freeimagehosting.net/uploads/53273b4ddf.jpg
    swmtgoetx_: I only did the other cmd's to try to make it spit out something, anything lol :D
    The proper cmd is simply: java -jar soht-client-0.6.2.jar
    I did give your cmd a try, and it produced nothing :( (just like the other correct cmds)
    java -client -jar soht-client-0.6.2.jar soht.properties
    Thank you again...the mystery remains
    PS. If you do a search for this you'll find an amazing amount of XP SP3 users with the same problem and no solution posted that I could find except one chap that did the unistall install order that I did above).

  • Document number 5000000013 not within defined interval

    Experts ,
    When I am trying to create PO(ME21N),
    System is showing the error
    Document number 5000000011 not within defined interval
    Message no. 06223
    Diagnosis
    The document number you entered does not lie within the interval defined for purchasing documents.
    Procedure
    Contact your system administrator if changes need to be made to the number range interval.
    Help me to solve the issues
    Regards

    Hi Rahul,
         Change your document type and try once again.for creating PO in ME21N you need to select standard PO (NB).
    Check and revert back
    Thanks
    Ram

  • Whenever I double click on any htm or html document it will not open with firefox it gives a message window saying "Windows can not file path please type correctly" (not extact these words)

    I installed new version 4. Whenever I double click on any htm or html document it will not open with firefox it gives a message window saying "Windows can not file path please type correctly" (not extact these words) .. It was working when old firefox was there..

    Phillipp,
    I tried it again using "save link as", and this time it actually worked! I just now downloaded several more using the "save link as" option, and it works perfectly. Thanks. Problem solved.
    Littleberry

  • Can not open database "Master" requested by the login

    Hi everyone,
    I meet an issue when I set up bpc on my customer's production server. When the installing process arrives at "create sample database", there will be an error message "Error(A file activation error occured. The physical file name 'Can not open database "Master" requested by the login. The login failed. \Data\Apshell.mdf maybe incorrect. Diagnose and correct additional errors, and retry the operation." Then I check the database, the Apshell is not built. The sql server version is sql server 2008. Do you have some good suggestions about this issue? Thank you.

    Hi Robert,
    Please check the collation of your SQL Server.
    It must be SQL_Latin1_General_CP1_CI_AS (specified like requirement into installation guide).
    I think this is the issue in your case.
    Regards
    Sorin Radulescu

  • Itunes will not open and says R6034 an application has made an attempt to load runtime library incorrectly, I tried to load it twice but nothing

    Itunes will not open, it says R6034 an application has made an attempt to load C runtime library incorrectly, then it says service apple mobil device failed to start

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • Many 3rd party apps that I have used before now will not open with the alert "XYZ application cannot be opened because the identity of the developer cannot be confirmed"  Why now?

    Many 3rd party apps that I have used before now will not open with the alert "XYZ application cannot be opened because the identity of the developer cannot be confirmed"  Why now since I updated Mavericks?

    The format in which a developer has to sign his application in order for it to be recognized as signed has changed. Update the applications, wherever possible.
    To make a one-time exception to the security policy, follow these instructions. They apply to Installer packages and other installable items as well as applications.

  • I can not update my version of itunes. When I install the message "Could not open key UNKNOW \ Instaler \ Products \ E84E5F4E55179FC488DCF773E79CCA45 \ SourceList \ Media. Make sure you have sufficient access to that key or contact the support team." Any

    I can not update my version of itunes. When I install the message "Could not open key UNKNOW \ Instaler \ Products \ E84E5F4E55179FC488DCF773E79CCA45 \ SourceList \ Media. Make sure you have sufficient access to that key or contact the support team." Any tips on how to solve this problem?

    If doesn't work try use the instructions below BUT in BOTH folders, first in SourceList and after in the Media.
    Start>Run put regedit and press Ok.
    1. Go to the key: HKEY_CLASSES_ROOT\Installer\Products\9B00314CD581E574FBCE93FE37F2911B\SourceLis t\Media
    2. Right click in Media folder, select Permissions from the menu.
    3. You will see that is no user, on the "Permissions for..." dialog box which appears next, press the "Add.." button and add in the "All"
    4. Back on the first "Permissions for..." dialog box, click on each account in the top-list and make sure each has the "Full Control = Allow" and "Read = Allow" permissions
    5. Click the "Advanced" button and the "Advanced Security Settings" dialog box appears
    6. On the "Permissions tab" enable the checkmark box named "Replace all child object permissions with inheritable permissions from this object", then press the "Apply" button
    7. On the "Owner" tab, highlight the "Administrators" name in the lower listbox, enable the checkmark box called "Replace owner on subcontainers and objects" and press the "Apply Button"

  • Could not open key: UNKNOWN\Installer\Products\9B00314CD581E574FBCE93FE37F2911B\SourceList\Media.     Verify that you have sufficient access to that key, or contact your support personnel.

    Hi guys !
    My problem is in installation/uninstallation of iTunes:
    Could not open key:
    UNKNOWN\Installer\Products\9B00314CD581E574FBCE93FE37F2911B\SourceList\Media.    Verify that you have sufficient access to that key, or contact your support personnel.
    The error appear first time in installation iTunes 10.3.1.55.
    The error repeat in QuickTime, Bonjour, Apple Mobile Device Support, Apple Software Update, just changing the green area.
    How i fix this ?
    Thanks.
    PS: Im administrator.

    Start>Run put regedit and press Ok.
    1. Go to the key: HKEY_CLASSES_ROOT\Installer\Products\9B00314CD581E574FBCE93FE37F2911B\SourceLis t\Media
    2. Right click in Media folder, select Permissions from the menu.
    3. You will see that is no user, on the "Permissions for..." dialog box which appears next, press the "Add.." button and add in the "All"
    4. Back on the first "Permissions for..." dialog box, click on each account in the top-list and make sure each has the "Full Control = Allow" and "Read = Allow" permissions
    5. Click the "Advanced" button and the "Advanced Security Settings" dialog box appears
    6. On the "Permissions tab" enable the checkmark box named "Replace all child object permissions with inheritable permissions from this object", then press the "Apply" button
    7. On the "Owner" tab, highlight the "Administrators" name in the lower listbox, enable the checkmark box called "Replace owner on subcontainers and objects" and press the "Apply Button"
    In my case, many errors appear before, but i fixing 1 by 1 and installation completed. Try and tell me later.

  • Could not open gmail on the mail application of the mac book pro. Gmail has two account types, SMTP and Google IMAP. In both cased failure in trying to log on to SMTP and Google IMAP because I have to verify that the username and password are correct.  Ho

    Could not open gmail on the mail application of the mac book pro.
    Gmail has two account types, SMTP and Google IMAP.
    In both cases failure in trying to log on to SMTP and Google IMAP because I have to verify that the username and password are correct.
    How do I verify that? Please help. Thanks.

    Routing gmail through Mail.app:
    imap-http://mail.google.com/support/bin/answer.py?answer=81379&topic=12814
    pop-http://mail.google.com/support/bin/answer.py?answer=13275&topic=12810
    More up-to-date advice here:
    http://www.macworld.com/article/2033842/make-mail-and-gmail-play-nice.html#tk.nl _mwhelp
    Note that you lose privacy when using Gmail (and Yahoo):
    Gmail and Yahoo both scan users' emails. They do algorithmic analysis of your email messages, targeting ads that relate to the content of your messages.

  • Documents from UCM not opening in some browsers

    Hi ,
    I am using the RIDC GET_FILE service to display the pdf in the WebCenter portal page. When the method is called the pdf document opens in Chrome browser in some machines but not in Firefox or other browsers. The file is returned as "application/octet-stream" and hence does not open as a pdf document.
    Following is the java code written to fetch the files
    import java.io.BufferedOutputStream;
    import java.io.File;
    import java.io.IOException;
    import java.io.InputStream;
    import java.io.PrintWriter;
    import javax.servlet.*;
    import javax.servlet.http.*;
    import oracle.adf.share.ADFContext;
    import oracle.javatools.resourcebundle.BundleFactory;
    import oracle.security.xmlsec.samlp.ResponseType;
    import oracle.stellent.ridc.IdcClient;
    import oracle.stellent.ridc.IdcClientManager;
    import oracle.stellent.ridc.IdcClientException;
    import oracle.stellent.ridc.IdcClientManager;
    import oracle.stellent.ridc.IdcContext;
    import oracle.stellent.ridc.convenience.usersecurity.CacheId;
    import oracle.stellent.ridc.convenience.usersecurity.IUserSecurityCache;
    import oracle.stellent.ridc.convenience.usersecurity.impl.UserSGAcctAclCache;
    import oracle.stellent.ridc.convenience.usersecurity.impl.UserSecurityGroupsCache;
    import oracle.stellent.ridc.model.DataBinder;
    import oracle.stellent.ridc.model.DataObject;
    import oracle.stellent.ridc.model.DataResultSet;
    import oracle.stellent.ridc.protocol.ServiceResponse;
    import utils.system;
        public class getFile extends HttpServlet {
            private static final String CONTENT_TYPE = "text/html; charset=UTF-8";
            private static final long serialVersionUID = 1L;
            public void init(ServletConfig config) throws ServletException {
                super.init(config);
            String cid ;
        public  void doGet( HttpServletRequest request,
                            HttpServletResponse response) throws  ServletException ,IOException {
                       try {
                           cid = request.getParameter("cid");
                       } catch (Exception e) {
                           e.printStackTrace();
            try{
                IdcClientManager manager = new IdcClientManager();
                IdcClient idcClient = manager.createClient("idc://oa8054.us.oracle.com:7444");
                IdcContext userContext = new IdcContext("SADMIN", "SADMIN1");
                        System.out.println("got idc client");
                    // populate the binder with the parameters
                        DataBinder dataBinder = idcClient.createBinder();
                        dataBinder.putLocal("IdcService", "GET_FILE");
                        dataBinder.putLocal("dDocName",cid);
                        dataBinder.putLocal("RevisionSelectionMethod","Latest");
                        dataBinder.putLocal("Rendition","Web");  
                     dataBinder.putLocal("allowInterrupt","1");
                        ServiceResponse response1 = idcClient.sendRequest (userContext, dataBinder);
                    response1 = idcClient.sendRequest (userContext, dataBinder);
                         InputStream content = response1.getResponseStream() ;  
                        BufferedOutputStream  output = new BufferedOutputStream(response.getOutputStream(), 1024);             
                        byte[] buffer = new byte[1024]; 
                        int length;
                        while ((length = content.read(buffer)) > 0){ 
                        output.write(buffer, 0, length); 
                content.close(); 
                output.flush();
                        output.close();
                    catch (IdcClientException e) {
                                 e.printStackTrace();
    And the call to the servlet is  made on click of a link.
    Why doesn't the documents() open in some browsers while it does in some.Similarly i want to open docx and rtf files from UCM also using the same code without downloading.
    Please help.
    Thanks

    Hi.
    Try following sample code:
    Include cmfn tag library in your page
    xmlns:cmfn="http://xmlns.oracle.com/webcenter/content/functions"
    Use next EL Expression to get a Node url's (are the same methods as a Node in CP):
    #{cmfn:getNodeById(yourdDocName).url.downloadUrl
    #{cmfn:getNodeById(yourdDocName).url.renderUrl
    Sample:
    <af:goLink targetFrame="_blank" destination="#{cmfn:getNodeById('UCM676546').url.downloadUrl}"/>
    You'll need connection to UCM configured in your WebCenter Portal Application because it will ask for the current IDC connection configured.
    Regards.

  • Document number range not creating in Ecc 6.0

    Hi
    I have tried creating document number range in 6.0, but the change interval buttion is in display mode and not in the change mode, so not able to cretae number range. Any input.
    Urgent please help.

    Hi Sidhu,
    It could be the limit of the authorization.
    So try to check whether you have an authorizatin to change the interval or not.
    Hope it helps.

  • Office documents does not open in the default office application from Search Results

    1 WFE + 1 App Server + 1 server for OWA + 1 separate DB server make up our DEV SharePoint 2013 environment. We migrated many web applications from our SP 2010 environment to SP 2013 environment. Client integration is enabled and "Open
    Documents in Client Applications by Default" feature is enabled at the site collection level. OWA is enabled and working on the search results, such as showing preview.
    From the document libraries, if I open office documents like word, excel and PowerPoint, they open in the respective office applications. However, from the search results, when I try to open by clicking on the result, it opens on the browser.  I want
    OWA to show document preview but still want to open the document in the default office application. How to overcome this?
    I have IE 8.
    Thanks, Soumya | MCITP, SharePoint 2010

    Go to the bottom of the Search page, you will see a Preferences link:
    From there, you can set your preference. This is a per-user setting and as far as I'm aware, cannot be set globally.
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Maybe you are looking for

  • Why is my Macbook still slow even after upgrading

    Hi everyone, I'm not sure if this has been answered before but here goes. So I have a Macbook 2.4GHz (13.3-inch Intel Core 2 Duo "Penryn") - Early 2008. Have been using it for the past 6 years without any issues. However during the past 1 year I've n

  • Itunes could not connect to the ipad because an invalid response was received from the device

    Hello I just installed the maximus v extreme motherboard with a ocz vertex 4 ssd with windows 7 x64. Installation was fine and installing drivers went without a hitch. Re-installing the software i use went fine as well. However, when i went to use iT

  • How to create folder inside User Meetings using XML API

    Hello, I have appreciative if some one help me on below task      I have created on application for user meeting.      In that I want dynamic folder creation as per user need or how to list folder that related to login user or say user session. Waiti

  • Word 2010 - Backspace Selects & Deletes Everything

    Hello. So, the problem I am having is only happening in Word right now. I am not sure what I did, but I did something. If I am at the end of a sentence or anything and I hit the backspace key, it selects everything before the cursor and deletes it (i

  • Installing Windows 7 on T440

    Hi all. I am installing Windows 7 from a USB device on a T440 but I get "Setup was unable to create a new system partition". I have tried to manually create a partition in DISKPART but it still won't install. Ideas? Thanks!