Document type not defined in lsmw idoc method

hello  iam posting Open AR Line Items for contract account using message type
CTRACDOCUMENT_CREATE  using lsmw idoc method .iam getting error as Document type not defined but actually when iam creating document manually item is created with out any error that means it is defined and my functional consultant is also saying he defined document type.can some body explain me what is the  problem.
Regards
priya

Check OMW9, here document type is defined for the transaction MIRO..
Go to OMW9, click in the Document Type.
Then double click on MIRO.
Also check the sap notes which is referred in the similar thread Document type not defined f5814

Similar Messages

  • Error message  - Message no. 26168, Document type '' not defined .

    Hi,
    I am setting up QA system after successful building of Dev System .
    While chnaging newly created folder in QA system gives error message  - Message no. 26168, Document type '' not defined .
    Document Type exists and are used to create folders successfully.
    Why I am getting this error?
    Kind Regards
    Harish

    Hi,
    Am Not able to implement this Note .
    Am facing the same issue .Please let me know the solution ASAP.
    Our SAP Version ECC6 EHP6
    Regards,
    Veeramani

  • Error Document type "" not defined

    Hi All,
    I am getting below error message when i am trying to see the output of a query build on Infoset in SAP R3 system.
    The Infoset is build on top of BKPF,BSEG and EKPO Tables.
    Document type  not defined
    Message no. F5814
    Diagnosis
    Financial Accounting service: document type "" was not found in the document type table. There are two possible causes:
    document type "" has not been set up in FI customizing
    document type is supplied incorrectly from the calling application
    System Response
    System error.
    Procedure
    There are two possible measures:
    set up document type "" in FI customizing
    system error within the calling application - get in contact with the SAP Hotline Service.
    Any input on above issue will be of great help.
    Regards,
    Anjali Singh

    Hi Anjali,
    In which system you are getting this error? Development or Production?
    I think you have doc. type just in BKPF (Accounting documents headers). Check if you have any record with document type blank.
    You can use t code SE16N for this issue. When you are setting filter on field "document type" (BLART) you can see the list of values. Check if there is any blank item
    Regards,
    Omid

  • Document Type not defined-J1IS

    Hi,
    When i am doing J1IS Transaction, at the time saving the documest i am getting an error Document Type not defined, so please guide where to define and necessary Customizing for that!
    Thanks in advance,

    Dear Andy
    If I understood your explanation correctly, please check in [VOFA]  for the billing type S1, whether you have assigned S1 in the field [Document Type]
    For information, as like for F2 document type, RV is the accounting document type which flows by default even if you maintain blank field but for S1, you should maintain the accounting document type for cancellation which is nothing but S1.
    thanks
    G. Lakshmipathi

  • While click on document shows error"document type not defined"

    HI
    we have folder structure in  DMS like:
    public folder->engineering folder->design folder->document(any)
    while i am clicking on document it shows error msg document type not defined
    please let me know why this error occur

    Hi,
    Since you are using document structure functionality, You are require to create an public folder initially and private folder for each user which is specific to user ID.
    If you dont want to create private folder you can select "Select document Via in CV03N screen and select only" Selection screen " and not browser.
    If the above changes is done then system will not through an error from CV03N screen"document type not defined"
    reward points if useful.
    Rgds,
    Nayeem.

  • Sales Document type not defined

    Hi
    I am working on an interface. Design is like below
    Purchase Order->File Adapter->XI (BPM)->RFC Adapter->Sales Order in R/3
    When I am trying to cretae a sales document in R/3, I am getting a message back from R/3 saying 'Sales Document is not defined'. But when Checked in R/3, that sales document type is existing. I don't see any Mapping execption in monitoring, but I am receiveing this message back from R/3
    Any feedback will be highly appreciate.
    Cheers
    Rajiv P

    Hi
    Well initially it was a value-mapping problem. It is possible to debug a BAPI/RFC from XI. If it is possible, the please advise me of the procedure. My XI is working fine but I am getting a message back from R/3 as below. Any feedback will be highly appreciated
    <?xml version="1.0" encoding="UTF-8" ?>
    - <rfc:BAPI_SALESORDER_PROXY_CREATE.Response xmlns:rfc="urn:sap-com:document:sap:rfc:functions">
      <E_SALESDOCUMENT_EX />
      <E_STATUS>E</E_STATUS>
    - <RETURN>
    - <item>
      <TYPE>S</TYPE>
      <ID>V4</ID>
      <NUMBER>233</NUMBER>
      <MESSAGE>SALES_HEADER_IN has been processed successfully</MESSAGE>
      <LOG_NO />
      <LOG_MSG_NO>000000</LOG_MSG_NO>
      <MESSAGE_V1>VBAKKOM</MESSAGE_V1>
      <MESSAGE_V2 />
      <MESSAGE_V3 />
      <MESSAGE_V4 />
      <PARAMETER>SALES_HEADER_IN</PARAMETER>
      <ROW>0</ROW>
      <FIELD />
      <SYSTEM>UD1CLNT010</SYSTEM>
      </item>
    - <item>
      <TYPE>E</TYPE>
      <ID>V1</ID>
      <NUMBER>384</NUMBER>
      <MESSAGE>Sales unit ****** is not defined for item 000000</MESSAGE>
      <LOG_NO />
      <LOG_MSG_NO>000000</LOG_MSG_NO>
      <MESSAGE_V1>******</MESSAGE_V1>
      <MESSAGE_V2>000000</MESSAGE_V2>
      <MESSAGE_V3 />
      <MESSAGE_V4 />
      <PARAMETER>SALES_ITEM_IN</PARAMETER>
      <ROW>1</ROW>
      <FIELD />
      <SYSTEM>UD1CLNT010</SYSTEM>
      </item>
    - <item>
      <TYPE>E</TYPE>
      <ID>V4</ID>
      <NUMBER>248</NUMBER>
      <MESSAGE>Error in SALES_ITEM_IN 000001</MESSAGE>
      <LOG_NO />
      <LOG_MSG_NO>000000</LOG_MSG_NO>
      <MESSAGE_V1>VBAPKOM</MESSAGE_V1>
      <MESSAGE_V2>000001</MESSAGE_V2>
      <MESSAGE_V3 />
      <MESSAGE_V4 />
      <PARAMETER>SALES_ITEM_IN</PARAMETER>
      <ROW>1</ROW>
      <FIELD />
      <SYSTEM>UD1CLNT010</SYSTEM>
      </item>
    - <item>
      <TYPE>E</TYPE>
      <ID>V4</ID>
      <NUMBER>219</NUMBER>
      <MESSAGE>Sales document was not changed</MESSAGE>
      <LOG_NO />
      <LOG_MSG_NO>000000</LOG_MSG_NO>
      <MESSAGE_V1 />
      <MESSAGE_V2>000001</MESSAGE_V2>
      <MESSAGE_V3 />
      <MESSAGE_V4 />
      <PARAMETER />
      <ROW>0</ROW>
      <FIELD />
      <SYSTEM>UD1CLNT010</SYSTEM>
      </item>
    - <item>
      <TYPE>E</TYPE>
      <ID>C_</ID>
      <NUMBER>005</NUMBER>
      <MESSAGE>The object references could not be written to the CRMKEY</MESSAGE>
      <LOG_NO />
      <LOG_MSG_NO>000000</LOG_MSG_NO>
      <MESSAGE_V1 />
      <MESSAGE_V2 />
      <MESSAGE_V3 />
      <MESSAGE_V4 />
      <PARAMETER />
      <ROW>0</ROW>
      <FIELD />
      <SYSTEM>UD1CLNT010</SYSTEM>
      </item>
      </RETURN>
      <TI_EXTENSIONIN />
      <TI_ORDER_CCARD />
      <TI_ORDER_CFGS_BLOB />
      <TI_ORDER_CFGS_INST />
      <TI_ORDER_CFGS_PART_OF />
      <TI_ORDER_CFGS_REF />
      <TI_ORDER_CFGS_REFINST />
      <TI_ORDER_CFGS_VALUE />
      <TI_ORDER_CFGS_VK />
    - <TI_ORDER_CONDITIONS_IN>
    - <item>
      <ITM_NUMBER>000001</ITM_NUMBER>
      <COND_ST_NO>000</COND_ST_NO>
      <COND_COUNT>00</COND_COUNT>
      <COND_TYPE>EDI1</COND_TYPE>
      <COND_VALUE>57.600000000</COND_VALUE>
      <CURRENCY>AUD</CURRENCY>
      <COND_UNIT />
      <COND_P_UNT>1</COND_P_UNT>
      <CURR_ISO />
      <CD_UNT_ISO />
      <REFOBJTYPE />
      <REFOBJKEY />
      <REFLOGSYS />
      <APPLICATIO />

  • LSMW IDOC method to upload material master

    hi,
    i want to upload the Material Master using LSMW Idoc Method.  I have not worked in LSMW IDOC MEthod previously
    can anyone help me.. please..
    ThankS IN ADVANCE
    GUHAPRIYAN

    hi Guhapriyan,
          In LSMW there are four method to migrate data.Idoc is one such method.You need to define three thing message type,
    Basic type,enhancement and a check box for enable structure for EDI.Once you complete this ,it ready to transfer.Before that you need to go through 12 basic steps.
    Hope this will help you.
    Regards,
    Albert

  • Vendor Address is not updating in ADRC table by LSMW IDOC method

    Hi,
    I'm updating Vendor address data by LSMW IDoc method
    for this i'm using ADRMAS as msg type and ADRMAS02 as Idoc type.
    In partner profiles Process code given as BAPI for this.
    i maintained entry in TSADOBJ table LFA1 as OBJTYPE,1 as ADDR TYPE,0001 as context,LFA1 as TABLENAME,ADRNR as FIELDNAME, ADRC as TABLE PERS, ADDRNUMBER as FIELD PERS
    Idoc generating sucessfully.
    But data is not updating in database.
    i think the problem in TSADOBJ config.
    Please give exact configuration which can update vendor data.
    Thanks in advance

    be open minded. SAP gives several import methods to load vendors.  one of them is per IDOC.
    But the vendor master IDOC does not automatically create the adress master.
    And even more important, if you migrate data from one SAP system to another, the IDOC method is more straight forward than the batch input, because you can send the IDOCs from legacy system to new system, you will then have a 1:1 relation of the structure in LSMW and you can create vendor masters by knowing the new vendor number from an internal number range already in LSMW, long before you actually post the vendor. With batch input you can either post with numbers from external number range, or you just dont know the new number already in LSMW.
    And you dont need to download the data to Excel. And further, the LFA1 adress data has less information than the ADRC adress data.

  • Problem LSMW + IDOC method for message type : MATMAS

    hi friends,
      I am using LSMW + IDOC method Message : MATMAS , idoc type : MATMAS03 .Setting every thing are fine. Finally Material is not created with error "message have been issued number : <idoc number>".
    data : material, industry type, material type, description, Basic unit of mesure.
    Please  help me.
    Balaji.T.

    Hi,
    I have nothing found regarding your issue. But maybe a look at SAP note 638058 will give you a hint.
    Regards,
    Klaus

  • Vk11 pricing conditions for LSMW  IDOC method...

    Hi Guru's,
    I am working on LSMW Idoc method. For Pricng conditions
    i am using Message type  'COND_A'  and basic type 'COND_A04'  .
    when we execute 14th step Idoc generation. I am Facing some problem like its displaying information message
           ' Partner type does not exist with the name ,'TYPE'.
      like this iam facing some problem.
    I already created partner profile in we20  clearly..
    This is the different requireent ,i never faced this problem earlier.
    Can any body help me in this regard.
    Regards
    Jayan Jalla,

    Hi,
    Activate the indbound settings in the LSMW by pressing the button
    'Activate Idoc Inbound Processing'.
    Regards,
    Shan

  • LSMW : Idoc method , Business Activities custom fields data upload

    Hi guys
    I am uploading Business activities using LSMW IDOC method and below message and idoc type
    Message type CRMXIF_ORDER_SAVE_M
    Basic idoc type : CRMXIF_ORDER_SAVE_M02
    Using EEWB I added few fields to business activities , along with the standard fields I want to upload the customer fields also .
    I tried to Extend the Basic idoc type CRMXIF_ORDER_SAVE_M02, but it was not allowing me to Extend ( since it is generated basic idoc type ) I tried the other Basic idoc types for Business activities , I got the same problem
    the basic idoc type contains only two Segments
    E101CRMXIF_CUSTOMER_H_X (parent)
    E101CRMXIF_CUSTOMER_H (child)
    with out my custom fields
    pls help how can i add my custom fields ( added by eewb) to the basic idoc type
    for uploading custom fields
    thanks in advance
    Warm regards
    Rajasekhar

    You are going to need to create an enhancement of the standard IDOC type in order to get your custom fields to show.  I can't remember the exact procedure, but you will need to create a Z-type based on the existing type in the system.  When you generate the z-type the fields will be filled in.
    Look at the following thread and it will give the basic steps
    How to delete Extention
    Good luck,
    Stephen

  • Create Purchase info record using LSMW idoc method

    Hello Friends,
    I am trying to update Purchase Info records using LSMW Standard program RM06IBI0.
    But it is not updating the condition price details and scale Quantity.
    For that the  form  suggessted LSMW IDOC method. with : Message Type         COND_A / COND_A02.
    But i dont know is the info record created earlier to this step or else we can create both using this method
    at a time ?  Does anybody please suggest.
    ( Actually Purchase Info record created using transaction  ME11 ).
    Regards,
    Phaneendra

    you first create the info record and subsequently you load the conditions.
    become familiar with the condition tables and its key first. Check How table A017 and A018 are maintained.
    Intresting is the field VAKEY which is actually the link to your info record.
    This is a combination of vendor, material, purchasing org, plant , and info record indicator.
    data:  begin of ZZVARKEYA,
            ZLIFNR like LFM1-LIFNR,
            ZMATNR like MARc-MATNR,
            ZEKORG like LFM1-EKORG,
            ZWERKS like MARC-WERKS,
            ZINFTYP like EINE-ESOKZ,
            end of zzvarkeyA.

  • Import Product Price and Condition using LSMW IDoc method

    Hi Friends,
    I am working on the Product Import to CRM from flat file using LSMW IDoc method using the "CRMXIF_PRODUCT_MATERIAL_SAVE" message type.
    I am able to import the entire product with its required details except the Price and its conditions.
    Can anyone please let me know which structure or with message type to be used to import the Product Price and condition using the IDoc method.
    Please pass on your valuable comments.
    Thanking you,
    Naveen

    Hi Naveen.
    I am doing the same thing but only the product gets created and the details like short text, unit etc. do not get populated. The idoc gets processed successfuly. Can you share the fields that are required to be mapped or are mandatory.

  • PO document type not transferring to Customs management

    Hi,
    We have configured PO document type in GTS for Import and it got transfer to Complaince not to customs.  I have created CULOIM document type and item category on customs.  when i checked on this table /SAPSLL/V_TLEYVS i couldn't find CULOIM document type..  When i try to create a new one it say CULOIM document type already exist...
    I do not know why it is saying like that even document type not there in that table and where would i find that.
    One more question:
    When we assign document type to logical system on Customs we can see GTS document type field... when you press F4 you can see CD Cat - A... Can you tell me what is that and where do you define and assign to custom document type.
    regards
    rc gopi

    You can maintain the table by going into the SPRO and defining the doc tyoe you looking for , Onc eyou maintain there it reflects in in this table as it Configuration table.
    If you want to delete , add any entry directly in table then u can do that by getting in debug mode.
    Select a  entry in table
    Double click on it
    Do /h  to switch on the debugging
    Press Enter
    You will See different Case for "Code"
    Type the filed name Code in in "field Name"
    it will display the value 'SHOW'  you can change this value as desire like to Delete 'DELE' , to insert new value 'AVNO' and then click on change pencil.
    and press F8.
    Now you come to the screen where u can do the changes and save it.
    Custom Doc Category is taken automatically by SAP as for Export and Import doc type  in customs it is always A.
    If you cDefine Document Types for Advance Docs for Customs Declaration it is C.
    Each category has got it one chateristics , so if we defining correct documnet type we need not to worry for category as it will by default come as set in SAP.
    Kind Regards,
    Sameer

  • Issues in using LSMW IDOC method for Article Hierarchy

    Hi Experts,
    I am working on a scenario for uploading article hierarchy using LSMW idoc method.
    Details:
              Message type WMATGRP
              IDoc type WMATGRP01
    But as per my understanig, for processing, there should be a inbound Function module/Process code. But I am unable to find out any process code for this in tcode WE42/We60.
    Could you please help in this problem.
    Regards
    Krishan Kumar

    Hi Saeed,
    For example if you want t create bom through lsmw then we will *** two files one header and other item one.In the same way .In lsmw start by keeping the idoc method i will only propose at second step how many files it need. Just map the idoc and see. Post if need more help.
    Regards,
    Madhu.

Maybe you are looking for