Document Type not defined-J1IS

Hi,
When i am doing J1IS Transaction, at the time saving the documest i am getting an error Document Type not defined, so please guide where to define and necessary Customizing for that!
Thanks in advance,

Dear Andy
If I understood your explanation correctly, please check in [VOFA]  for the billing type S1, whether you have assigned S1 in the field [Document Type]
For information, as like for F2 document type, RV is the accounting document type which flows by default even if you maintain blank field but for S1, you should maintain the accounting document type for cancellation which is nothing but S1.
thanks
G. Lakshmipathi

Similar Messages

  • Error message  - Message no. 26168, Document type '' not defined .

    Hi,
    I am setting up QA system after successful building of Dev System .
    While chnaging newly created folder in QA system gives error message  - Message no. 26168, Document type '' not defined .
    Document Type exists and are used to create folders successfully.
    Why I am getting this error?
    Kind Regards
    Harish

    Hi,
    Am Not able to implement this Note .
    Am facing the same issue .Please let me know the solution ASAP.
    Our SAP Version ECC6 EHP6
    Regards,
    Veeramani

  • Error Document type "" not defined

    Hi All,
    I am getting below error message when i am trying to see the output of a query build on Infoset in SAP R3 system.
    The Infoset is build on top of BKPF,BSEG and EKPO Tables.
    Document type  not defined
    Message no. F5814
    Diagnosis
    Financial Accounting service: document type "" was not found in the document type table. There are two possible causes:
    document type "" has not been set up in FI customizing
    document type is supplied incorrectly from the calling application
    System Response
    System error.
    Procedure
    There are two possible measures:
    set up document type "" in FI customizing
    system error within the calling application - get in contact with the SAP Hotline Service.
    Any input on above issue will be of great help.
    Regards,
    Anjali Singh

    Hi Anjali,
    In which system you are getting this error? Development or Production?
    I think you have doc. type just in BKPF (Accounting documents headers). Check if you have any record with document type blank.
    You can use t code SE16N for this issue. When you are setting filter on field "document type" (BLART) you can see the list of values. Check if there is any blank item
    Regards,
    Omid

  • Document type not defined in lsmw idoc method

    hello  iam posting Open AR Line Items for contract account using message type
    CTRACDOCUMENT_CREATE  using lsmw idoc method .iam getting error as Document type not defined but actually when iam creating document manually item is created with out any error that means it is defined and my functional consultant is also saying he defined document type.can some body explain me what is the  problem.
    Regards
    priya

    Check OMW9, here document type is defined for the transaction MIRO..
    Go to OMW9, click in the Document Type.
    Then double click on MIRO.
    Also check the sap notes which is referred in the similar thread Document type not defined f5814

  • While click on document shows error"document type not defined"

    HI
    we have folder structure in  DMS like:
    public folder->engineering folder->design folder->document(any)
    while i am clicking on document it shows error msg document type not defined
    please let me know why this error occur

    Hi,
    Since you are using document structure functionality, You are require to create an public folder initially and private folder for each user which is specific to user ID.
    If you dont want to create private folder you can select "Select document Via in CV03N screen and select only" Selection screen " and not browser.
    If the above changes is done then system will not through an error from CV03N screen"document type not defined"
    reward points if useful.
    Rgds,
    Nayeem.

  • Sales Document type not defined

    Hi
    I am working on an interface. Design is like below
    Purchase Order->File Adapter->XI (BPM)->RFC Adapter->Sales Order in R/3
    When I am trying to cretae a sales document in R/3, I am getting a message back from R/3 saying 'Sales Document is not defined'. But when Checked in R/3, that sales document type is existing. I don't see any Mapping execption in monitoring, but I am receiveing this message back from R/3
    Any feedback will be highly appreciate.
    Cheers
    Rajiv P

    Hi
    Well initially it was a value-mapping problem. It is possible to debug a BAPI/RFC from XI. If it is possible, the please advise me of the procedure. My XI is working fine but I am getting a message back from R/3 as below. Any feedback will be highly appreciated
    <?xml version="1.0" encoding="UTF-8" ?>
    - <rfc:BAPI_SALESORDER_PROXY_CREATE.Response xmlns:rfc="urn:sap-com:document:sap:rfc:functions">
      <E_SALESDOCUMENT_EX />
      <E_STATUS>E</E_STATUS>
    - <RETURN>
    - <item>
      <TYPE>S</TYPE>
      <ID>V4</ID>
      <NUMBER>233</NUMBER>
      <MESSAGE>SALES_HEADER_IN has been processed successfully</MESSAGE>
      <LOG_NO />
      <LOG_MSG_NO>000000</LOG_MSG_NO>
      <MESSAGE_V1>VBAKKOM</MESSAGE_V1>
      <MESSAGE_V2 />
      <MESSAGE_V3 />
      <MESSAGE_V4 />
      <PARAMETER>SALES_HEADER_IN</PARAMETER>
      <ROW>0</ROW>
      <FIELD />
      <SYSTEM>UD1CLNT010</SYSTEM>
      </item>
    - <item>
      <TYPE>E</TYPE>
      <ID>V1</ID>
      <NUMBER>384</NUMBER>
      <MESSAGE>Sales unit ****** is not defined for item 000000</MESSAGE>
      <LOG_NO />
      <LOG_MSG_NO>000000</LOG_MSG_NO>
      <MESSAGE_V1>******</MESSAGE_V1>
      <MESSAGE_V2>000000</MESSAGE_V2>
      <MESSAGE_V3 />
      <MESSAGE_V4 />
      <PARAMETER>SALES_ITEM_IN</PARAMETER>
      <ROW>1</ROW>
      <FIELD />
      <SYSTEM>UD1CLNT010</SYSTEM>
      </item>
    - <item>
      <TYPE>E</TYPE>
      <ID>V4</ID>
      <NUMBER>248</NUMBER>
      <MESSAGE>Error in SALES_ITEM_IN 000001</MESSAGE>
      <LOG_NO />
      <LOG_MSG_NO>000000</LOG_MSG_NO>
      <MESSAGE_V1>VBAPKOM</MESSAGE_V1>
      <MESSAGE_V2>000001</MESSAGE_V2>
      <MESSAGE_V3 />
      <MESSAGE_V4 />
      <PARAMETER>SALES_ITEM_IN</PARAMETER>
      <ROW>1</ROW>
      <FIELD />
      <SYSTEM>UD1CLNT010</SYSTEM>
      </item>
    - <item>
      <TYPE>E</TYPE>
      <ID>V4</ID>
      <NUMBER>219</NUMBER>
      <MESSAGE>Sales document was not changed</MESSAGE>
      <LOG_NO />
      <LOG_MSG_NO>000000</LOG_MSG_NO>
      <MESSAGE_V1 />
      <MESSAGE_V2>000001</MESSAGE_V2>
      <MESSAGE_V3 />
      <MESSAGE_V4 />
      <PARAMETER />
      <ROW>0</ROW>
      <FIELD />
      <SYSTEM>UD1CLNT010</SYSTEM>
      </item>
    - <item>
      <TYPE>E</TYPE>
      <ID>C_</ID>
      <NUMBER>005</NUMBER>
      <MESSAGE>The object references could not be written to the CRMKEY</MESSAGE>
      <LOG_NO />
      <LOG_MSG_NO>000000</LOG_MSG_NO>
      <MESSAGE_V1 />
      <MESSAGE_V2 />
      <MESSAGE_V3 />
      <MESSAGE_V4 />
      <PARAMETER />
      <ROW>0</ROW>
      <FIELD />
      <SYSTEM>UD1CLNT010</SYSTEM>
      </item>
      </RETURN>
      <TI_EXTENSIONIN />
      <TI_ORDER_CCARD />
      <TI_ORDER_CFGS_BLOB />
      <TI_ORDER_CFGS_INST />
      <TI_ORDER_CFGS_PART_OF />
      <TI_ORDER_CFGS_REF />
      <TI_ORDER_CFGS_REFINST />
      <TI_ORDER_CFGS_VALUE />
      <TI_ORDER_CFGS_VK />
    - <TI_ORDER_CONDITIONS_IN>
    - <item>
      <ITM_NUMBER>000001</ITM_NUMBER>
      <COND_ST_NO>000</COND_ST_NO>
      <COND_COUNT>00</COND_COUNT>
      <COND_TYPE>EDI1</COND_TYPE>
      <COND_VALUE>57.600000000</COND_VALUE>
      <CURRENCY>AUD</CURRENCY>
      <COND_UNIT />
      <COND_P_UNT>1</COND_P_UNT>
      <CURR_ISO />
      <CD_UNT_ISO />
      <REFOBJTYPE />
      <REFOBJKEY />
      <REFLOGSYS />
      <APPLICATIO />

  • PO document type not transferring to Customs management

    Hi,
    We have configured PO document type in GTS for Import and it got transfer to Complaince not to customs.  I have created CULOIM document type and item category on customs.  when i checked on this table /SAPSLL/V_TLEYVS i couldn't find CULOIM document type..  When i try to create a new one it say CULOIM document type already exist...
    I do not know why it is saying like that even document type not there in that table and where would i find that.
    One more question:
    When we assign document type to logical system on Customs we can see GTS document type field... when you press F4 you can see CD Cat - A... Can you tell me what is that and where do you define and assign to custom document type.
    regards
    rc gopi

    You can maintain the table by going into the SPRO and defining the doc tyoe you looking for , Onc eyou maintain there it reflects in in this table as it Configuration table.
    If you want to delete , add any entry directly in table then u can do that by getting in debug mode.
    Select a  entry in table
    Double click on it
    Do /h  to switch on the debugging
    Press Enter
    You will See different Case for "Code"
    Type the filed name Code in in "field Name"
    it will display the value 'SHOW'  you can change this value as desire like to Delete 'DELE' , to insert new value 'AVNO' and then click on change pencil.
    and press F8.
    Now you come to the screen where u can do the changes and save it.
    Custom Doc Category is taken automatically by SAP as for Export and Import doc type  in customs it is always A.
    If you cDefine Document Types for Advance Docs for Customs Declaration it is C.
    Each category has got it one chateristics , so if we defining correct documnet type we need not to worry for category as it will by default come as set in SAP.
    Kind Regards,
    Sameer

  • Add Category to Document type not document

    Hi,
    When I add category to document, it adds records to odm_publicobject but i want to add category to document type not the document.For example i have a letter document type.i dont want to add "business" category to each letter just i want to add the letter type.is there any way to make it?

    Hello
    If we change any other field included in the release strategy (e.g. purchasing group) it works changing the release strategy. However it is not working for the document type.
    Do you know why and how to handle this?
    Thank you and best regards,
    Alejandra Álamo B.

  • 'Order type not defined in the sales area'.

    Hi,
    I am creating a sales order, in order type I am taking standard order 'OR' but it is giving error message -'Order type not defined in the sales area'.
    Pls where to tweak..
    regards,

    Hi,
    In the transaction code OVAZ you can assign the SALES ORDER type to your SALES AREA
    and also check the below transaction code
    OVAM--- Reference distribution channel
    OVAN---- Reference Division
    OVAO ---Reference sales organisation
    revert back if you need any more
    thanks
    santosh

  • AFAB IM document type is defined only for batch input

    Hello Everybody,
    With the new version ECC6, I have this message error : "document type is defined only for batch input"  when I launch the monthly depreciation with AFAB transaction.
    Thanks a lot in advance for your help !
    Regards.

    Hi
    For this document type in OBA7, remove the check for 'batch input only'
    Thank You,

  • Class type not defined for this object type

    Hi Friends,
    Could u please guide me ?..We have a requirement to extract some data from classification system.
    This is related with class type 023 - Batch
    I want to use the following parameters in CTBW.
    basis datasource :Z_BATCH_ATTR
    class type : 023
    object table :MCHA
    Datasource type : ATTR
    I am getting an error "Class type not defined for this object type" when i enter the above entries in CTBW.
    The only way I'm being able to make this work is changing object table from MCHA to MCH1.
    This solution does not fit me bacause MCH1 table dont have Plant as Key, and I need it.
    Do you know what should I do to solve this?
    Thanks in advance

    Hi,
    I believe we have to use the list of standard "Basis DataSource", as I'm also stuck with the same issue. Let me know what Basis Data source you selected in this case.
    As I'm trying to extract Batch attributes from "AUSP" Table.
    I have given class type= 023
    Obj Table= AUSP
    But not sure which "basis datasource" I need to select.
    Thanks,
    Satish

  • Table type not defined for table control "T_CONTROL" (Custom table)

    Hi All,
    I m facing a problem in ITS mobile service.
    The Table control designed by me in R/3 (Module pool program) is
    not getting displayed in ITS mobile page.
    It is giving me an error "Table type not defined for table control "T_CONTROL" (Custom table) ".
    Can you please let me how this issue can be resolved.
    With Regards,
    Mahesh

    CONTROLS: table_ctr TYPE TABLEVIEW USING SCREEN '0010'.
    try using this....
    Regards
    Vasu

  • Oracle Fusion Middleware 11G  B2B Document Type not getting Identified

    Hello,
    I have installed Oracle Fusion Middleware 11g on my local machine and created a custom document type with proper .xsd definition and XPath Expression Identifier in Oracle B2B interface and configured its trading partners ( Host & Remote ) along with an agreement between the partners.
    I have also configured the host listening channel of Generic-File type which picks xml files from my c:\orclsrvs_in folder.
    My problem is that the moment I drop any sample file in the expected directory, it gets picked up from B2B , but there isn't any record of the same under Reports and Metrics links.
    The Business message, Application message and Conversation message tabs are also not showing any information about the record picked, but in wire message tab, the record is shown in PROCESSING state.
    I am not able to conclude whats wrong behind this.. where can i track the logs for the same ??
    kindly help to resolve this issue.
    Thanks & Regards
    Hiteshkumar Chaudhary

    Hi Hitesh,
    i came to know that B2B extracts the TP name from the filename itselfYes, in case of Generic File, Generic SFTP and Generic FTP, file name provides the necessary values to Oracle B2B to identify the Trading Partner. You can define your own file name format in the Delivery Channel under Transport Protocol Parameters in field "Filename format" (It's an optional field but it is always good to define your own format, otherwise B2B will take it's default format - TradingPartner_DocumentType_Revision_msgType_msgId_replytoMsgID_extension.xml ). Following Filename formats can be used -
    %FROM_PARTY%
    %TO_PARTY%
    %DOCTYPE_NAME%
    %DOCTYPE_REVISION%
    %MSG_ID%
    %TIMESTAMP%
    These file name formats can be used in any combination; for example,
    %TO_PARTY%_%DOCTYPE_NAME%_%DOCTYPE_REVISION%.dat
    Note - Any file extension is allowed.
    what are the system parameters to be set in weblogic console and how?? This activity is part of the pre and post installation steps. If you have done those without getting any errors then nothing else is required.
    how shall I reinstall XEngine properly ??XEngine is part of B2B installation. If B2B gets installed without flashing any errors then we assume that other components of this part has installed properly.
    Regards,
    Anuj
    Edited by: Anuj Dwivedi, Infosys on Aug 28, 2009 5:51 PM

  • B2B Custom Document Type not getting identified

    Hello,
    I have installed Oracle Fusion Middleware 11g on my local machine and created a custom document type with proper .xsd definition and XPath Expression Identifier in Oracle B2B interface and configured its trading partners ( Host & Remote ) along with an agreement between the partners.
    I have also configured the host listening channel of Generic-File type which picks xml files from my c:\orclsrvs_in folder.
    My problem is that the moment I drop any sample file in the expected directory, it gets picked up from B2B , but there isn't any record of the same under Reports and Metrics links.
    The Business message, Application message and Conversation message tabs are also not showing any information about the record picked, but in wire message tab, the record is shown in PROCESSING state.
    I am not able to conclude whats wrong behind this.. where can i track the logs for the same ??
    kindly help to resolve this issue.
    Thanks & Regards
    Hiteshkumar Chaudhary

    Hi Hitesh,
    i came to know that B2B extracts the TP name from the filename itselfYes, in case of Generic File, Generic SFTP and Generic FTP, file name provides the necessary values to Oracle B2B to identify the Trading Partner. You can define your own file name format in the Delivery Channel under Transport Protocol Parameters in field "Filename format" (It's an optional field but it is always good to define your own format, otherwise B2B will take it's default format - TradingPartner_DocumentType_Revision_msgType_msgId_replytoMsgID_extension.xml ). Following Filename formats can be used -
    %FROM_PARTY%
    %TO_PARTY%
    %DOCTYPE_NAME%
    %DOCTYPE_REVISION%
    %MSG_ID%
    %TIMESTAMP%
    These file name formats can be used in any combination; for example,
    %TO_PARTY%_%DOCTYPE_NAME%_%DOCTYPE_REVISION%.dat
    Note - Any file extension is allowed.
    what are the system parameters to be set in weblogic console and how?? This activity is part of the pre and post installation steps. If you have done those without getting any errors then nothing else is required.
    how shall I reinstall XEngine properly ??XEngine is part of B2B installation. If B2B gets installed without flashing any errors then we assume that other components of this part has installed properly.
    Regards,
    Anuj
    Edited by: Anuj Dwivedi, Infosys on Aug 28, 2009 5:51 PM

  • Document-Type not known for scanned invoice

    Hi experts,
    I assign in OAWD a scanned document (Vendor Invoice) with "Storing for subsequent entry" to an user.
    Vendor Invoice is linked to TA F-43.
    The message appears in the Business Workplace SBWP. After executing a window appears "Process document type (Enter Document)" but without document type and TA F-43 will not be called.
    It looks like that the document lost the relation to document type and the transaction.
    Has anybody experience with this issue?
    Thank you in advance
    Martin

    Hi Martin,
    I suppose you did configure the OAC2, OAC3, SOA0 (BKPF-CREATE) and OACA - with parameter Transactioncode eq. F-43
    Now 1st try F-43 for your user in standard dialog mode. Working?
    Does the scanned image come up at after executing the workitem? (it should)
    Than the F-43 should be called. This has no other pre-set value. So FI document type (BLART) is not set in OAWD.
    How far do you get?
    Regards
    Tomas H

Maybe you are looking for

  • Error faced while creating Oracle Job

    Hi, I have the following script to create a job. It executed successfully on my database. When we tried to execute the same at our clients place we got some error, =========================================== SQL> DECLARE 2 job NUMBER; 3 m_sleeptimega

  • Device works using max but not with VI

    Hi All.. I am able to control a kepco power supply with comminicating by MAX. But with VI (7.0) that has the same command structure it s not possible..Moreover, i dont get any error message either. Could you have a look the VI attached and make ur co

  • Epson R1800 and Airport Express

    Hi I have read elsewhere in the discussions that the Epson R1800 does work with Airport express and am seeking some guidance regarding this before spending my coin on the Airport unit. Since the R1800 is not listed in the ifelix list, will it be full

  • Microsoft Excel for Windows has encountered a problem and needs to close. W

    i have the attached problem anytime i tried to open a BW query in excel:Microsoft Excel for Windows has encountered a problem and needs to close. We are sorry for the inconvenience", Please inform if there is a work arround, i have re-install excel ,

  • Just won't open

    i tried to download the quicktime and itunes together but after installation when i try to open it pops up for a second then dissapears(both itunes and quicktime player) . can any one help thxs ?