Documentation for setting up a new concurrent request

Does any one have the documentation for setting up a brand new concurrent request?
Thanks,
Chiru

Check Oracle® Applications System Administrator’s Guide Conguration Release 11i
Chapter 6 - Dening Concurrent Programs and Reports
http://download-uk.oracle.com/docs/cd/B25516_14/current/acrobat/115sacg.zip

Similar Messages

(Request for:) Best practices for setting up a new Windows Server 2012 r2 Hyper-V Virtualized AD DC

Could you please share your best practices for setting up a new Windows Server 2012 r2 Hyper-V Virtualized AD DC, that will be running on a new WinSrv 2012 r2 host server. (This
will be for a brand new network setup, new forest, domain, etc.)
Specifically, your best practices regarding:
the sizing of non virtual and virtual volumes/partitions/drives,
the use of sysvol, logs, & data volumes/drives on hosts & guests,
RAID levels for the host and the guest(s),
IDE vs SCSI and drivers both non virtual and virtual and the booting there of,
disk caching settings on both host and guests.
Thanks so much for any information you can share.

A bit of non essential additional info:
We are small to midrange school district who, after close to 20 years on Novell networks, have decided to design and create a new Microsoft network and migrate all of our data and services
over to the new infrastructure . We are planning on rolling out 2012 r2 servers with as much Hyper-v virtualization as possible.
During the last few weeks we have been able to find most of the information we need to undergo this project, and most of the information was pretty solid with little ambiguity, except for
information regarding virtualizing the DCs, which as been a bit inconsistent.
Yes, we have read all the documents that most of these posts tend point to, but found some, if not most are still are referring to performing this under Srvr 2008 r2, and haven’t really
seen all that much on Srvr2012 r2.
We have read these and others:
Introduction to Active Directory Domain Services (AD DS) Virtualization (Level 100),
Virtualized Domain Controller Technical Reference (Level 300),
Virtualized Domain Controller Cloning Test Guidance for Application Vendors,
Support for using Hyper-V Replica for virtualized domain controllers.
Again, thanks for any information, best practices, cookie cutter or otherwise that you can share.
Chas.

HT1766 I have restored my new phone from I cloud but when I connect to my PC to put some music on it asks for set up as new phone or back up from a date from iTunes that is too old. Help it's doing my head in

I have restored my new phone from I cloud but when I connect to my PC to put some music on it asks for set up as new phone or back up from a date from iTunes that is too old. Help it's doing my head in

Select setup as "New", the next screen should prompt you to rename your phone. Just name it what you already have it named. After that, you should be able to sync and all of your data & settings will still be exactly as you've already set them up on your phone. The message is more threatening than what really happens.

Simple directions for setting up a new magic mouse?

Have the original mouse, which keeps losing its connection. I am replacing it with a brand new Magic Mouse and have looked all over for directions to connect with with my MAC, discontinue the original mouse, and start using the new one. I have checked all my updates and downloaded the most current magic mouse software. A pop up says there is a new version of the download already loaded, but I can't find it.
Can someone tell me if I really need a new mouse and can help me correct my connection loss on my orginal mouse or help me, step by step, to connect the new one? Thank you all.

Reset the PRAM to see if that helps the old mouse.
Setting up the new one should be turn it on and it should pair.
Barry

What is my outgoing mail server for setting up a new account in Mail?

Hi, I'm trying to set up a new account in Mail so that I check my school e-mail from that application and I've figured out what my incoming mail server is, but what where would I find the outgoing mail server if I want to send through Mail?
Thanks

Welcome to Apple Discussions!
Ask the company providing you internet juice to get online. If it is Comcast, it typically is smtp.comcast.net or mail.comcast.net. If it is Verizon, it is outgoing.verizon.net. If it is someone else it is some SMTP server that is assigned by the company that you pay your bills to get online with.

DAW - advice for setting up my new DAW?

Hi,
I intend to get my own DAW/general purpose computer in the next few months and was hoping to run my plan by y'all for advice. I intend to use it half for music recording, and also as a normal computer.
I plan to have a high end graphics card (dual dvi) for games etc, will run a 23" widescreen lcd (pref apple on pc) or bigger maybe upgrading to dual monitors later. I am running a HD tv card which needs some good headroom when recording. I only play far cry and need for speed when it comes to games etc so won't have a million games installed.
I have a about 50 gig of music mp3's and wmas and general stuff, so need lots of storage space. I have about 10gig of AA session files and that will grow so im thinking 30-40 gig min.
For recording/mixing, i have usually 10 trax minimum with lots of real time, sometimes locked fx, i do a lot of processing/wave editing and can have up to 10minute tracks up to 24 etc so i need some juice to power it all. running xp pro sp2.
Can someone explain raid vs ide, im told i can raid 2 similiar drives, but how much better is it, and are there draw backs? can i raid 2 x 15000rpm drives together(2 x 20 or 2 x 40 gig) as my dedicated AA session files space or is that just overkill, i plan to have maybe 2 x 250 gig 7200 or 10 000 drives raided as a dedicated digital vcr for HD tv recording, a small system drive 20-40gig just for installed stuff, another 80-250 gig for normal storage. Any ideas for best way to configure this stuff? minimum im thinking is sep small sys drive, sep AA drive/raided or not, sep bigass drive for TV recording, and sep general storage drive so thats minimum 4 or more.
Wireless keyboard (ultra flat touch keys like on bank atm's sort super silent DO THESE EXIST YET IF SO PLEASE TELL ME WHERE AND WHAT CALLED?)
and wireless optical mouse with extra side buttons and fully functional
Can y'all fill me in on scsi, im told the 14k rpm drives need a scsi
controller or osmething? tell me about this stuff please
Also, 64bit cpus? what the hell does that mean
I'm thinking the fastest intel cpu wht is it 3 gig these days with cache, or does anyone know how much dual cpu will cost (and what needs to go with it) motherboard with 800fsb and 8x agp that can take like 1-2 gig of ram (what sort is fastest?), 8 x agp graphics card that is very high end for 1080i output for high definition tv, and games.
Obviously dvd+rw/cd+rw drive.
Need advise on DAW case, ultra sound and heat proof as i might sleep in the same room and im sick of noisy computers, and i might need a big load of space with all the hdd's depending on what i get, will have a usb2. pci card no doubt and tv card etc
Wondering bout the new audigy 2 zn platinum pro thing Is this any good compared to the normal audigy 2? it says with firewire i can have 7 stereo inputs, is that really true at once, do i need extra external hardware like a mixer to do that, and does AA support that at all?
I have a decent pair of phones i will use for a while until i get studio monitors so don't worry about them for now, thats later.
I hope to spend only about 3-6 grand Australian pref no more, so any suggestions of other things to add or not to bother with etc, revisions?

Billy Corgan wrote:
> I intend to get my own DAW/general purpose computer
> in the next few months and was hoping to run my plan
> by y'all for advice.
Don't clutter a daw with too much GP stuff, office software
installations and antivirus software should generally not be installed
on a daw, and a gp computer can generally not be without either.
Generally, mind you, generally is generally a lot less general with the
more capable hardware, but a lean daw is a happy daw. Fortunately a
p2-300 with 192 megs of ram and a modern harddisk is still a lot of GP
officing computer, and such machines are not costly on the second hand
market.
> I intend to use it half for music recording, and also as
> a normal computer.
There may be valid reasons for doing that, if so then you could be well
off having multiple OS installations on it, one for GP use and one for
Audio use and making it a multibooter. It however my experience that a
multibooter always ends up being booted in the wrong OS ..... O;-)
> I plan to have a high end graphics card (dual dvi) for games etc,
A dual head card is strongly recommended. Matrox has nice cards that do
not need to have a fan on them and that do not require the utmost
hardware speed. You do not WANT to have the ultra fastest graphics card
on a daw because you need to avoid that the graphics cards bus bandwidth
requirements obstruct other, more vital chores. Less fast cards that do
not require a fan allows for a more quiet system.
> will run a 23" widescreen lcd (pref apple on pc) or bigger
> maybe upgrading to dual monitors later.
It may be that you can get dual smaller lcd's for the same budget as one
23", and it may be of more use, everybody is on some kind of a budget,
and you also need to have money over for audio hardware. Good mics and
good mic pre's do more for the quality of your sound than a larger
screen.
> I am running a HD tv card which needs some good headroom when
> recording.
Hmmm ...... select the recording options wisely, you come across as
chasing specs rather than as being aware of just what specs you actually
need.
> I only play far cry and need for speed when it comes to games etc
> so won't have a million games installed.
One never knows what the future holds, but it should be possible to
avoid having too many games installed at any one time.
> I have a about 50 gig of music mp3's and wmas and general stuff,
> so need lots of storage space. I have about 10gig of AA session
> files and that will grow so im thinking 30-40 gig min.
It is too costly pr. gigabyte to buy anything smaller than 120 GB, and
the 120 GB drives of today are all comfortably fast. You should at least
have two physical drives for Audition so as to be able to avoid
simultaneous reads and writes on the same drive, three physical drives
are imo preferable.
> For recording/mixing, i have usually 10 trax minimum with lots
> of real time, sometimes locked fx, i do a lot of processing/wave
> editing and can have up to 10minute tracks up to 24 etc so i need
> some juice to power it all. running xp pro sp2.
I think that your setup is one that would benefit of having three
physical drives to prevent having temp files on the drive that contains
the "static" audio files.
> can someone explain raid vs ide, im told i can raid
> 2 similiar drives, but how much better is it,
Depends, it is not faster than a single drive where it is fastest, but
raid 0 (simple stripe set) is less likely to show performance reduction
due to file fragmentation. A stripe set still counts as "one physical
drive", and if you want to have only two drives in it you are better off
not having them striped.
> and are there draw backs?
You can not remove just one harddisk and move it to another machine. If
one harddisk fails, then all is lost, at least if you run a simple
stripe set. The probability math is tolerable with only two disks in a
stripe set, but it takes less of an error to loose all. All things
considered you need to have a problem to solve by striping prior to
doing it, and distributing multitrack files over several physcial drives
is also a way to increase playback performance if there is a problem to
solve.
> can i raid 2 x 15000 rpm drives together(2 x 20 or 2 x 40 gig)
> as my dedicated AA session files space or is that just overkill,
That would be a silly set up, three 5400 or 7200 rpm 120 GB drives is a
possibly less costly way to get same or better performance, assuming
wise deployment. You will always end up having some copying of files
from one physical drive to another, and consequently it is very wise to
have identical drives so that the faster need not wait for the slower.
> I plan to have maybe 2 x 250 gig 7200 or 10 000 drives raided
> as a dedicated digital vcr for HD tv recording,
I wouldn't raid them, but tv recording is a very fast way of making
large drives appear small and I don't really know what the bandwidth
requirement is for recordign hdtv.
> a small system drive 20-40gig just for installed stuff,
No, you will be wasting a valuable drive bay on a drive that will be a
bottleneck, three drives is a good idea, but preferably identical or at
least similar. Put that old drive in a USB 2.0 box and use it for
project backup instead.
> another 80-250 gig for normal storage.
Yes, you may need storage space when you want to do TV recording, so 750
GB unformatted is not unreasonable.
> Any ideas for best way to configure this stuff? minimum I'm
> thinking is sep small sys drive, sep AA drive/raided or not,
> sep bigass drive for TV recording, and sep general storage
> drive so thats minimum 4 or more.
Three 200 GB drives will probably be the optimally cost efficient setup.
> wireless keyboard (ultra flat touch keys like on bank atm's
> sort super silent DO THESE EXIST YET IF SO PLEASE TELL ME
> WHERE AND WHAT CALLED?)
A wireless keyboard is called too slow and too sloppy ...
> and wireless optical mouse with extra side buttons
But a wireless mouse can be an ergonomic advantage, agreed.
> can y'all fill me in on scsi,
Too costly.
> im told the 14k rpm drives need a scsi
> controller or osmething?
Yes, and thus it gets to be about a very different and very costly mobo.
You do not want a disk controller on the PCI bus on a DAW.
> also, 64bit cpus? what the hell does that mean
Currently nothing of relevance considering the current software. What it
means is that the memory allocation space can be 64 terabytes rather
than 4 GB, and that is rapidly getting to be of importance for database
servers and terminal servers.
> im thinking the fastest intel cpu wht is it 3 gig these
> days with cache, or does anyone know how much dual cpu
> will cost (and what needs to go with it)
It is unknown to me whether Audition actually will benefit from multiple
CPU's, generally the required CPU versions (XEON) and mobo's are too
costly to make sense.
> motherboard with 800fsb
Asus P5P800 is modestly priced. I think your specs are extreme and that
your quests are of the "it would be nice to be able to" type. Life is
not about using as much money on chasing specs as possible, but rather
about getting good results. To do that, you also need to have resources
to get some reasonable audio equipment. Leave all the video concerns out
of it, I have understood them to be about leasure, and live with
recording the number of pixels that is possible with a good DAW.
I suggest this also because it may be problematic to try to make a
multitrack audio recording simultanously on the machine that records the
video in case "both combined" is the productivity quest. Just one reason
for not thinking that hdtv is very important on the machine is that it
is not very likely that you actually record hdtv with a camera.
> wondering bout the new audigy 2 zn platinum pro thing
In the audio context that is relevant here something Midiman is "more
like it" - example product, not the only possible choice. See also
http://www.pcavtech.com, Arny Krügers very interesting web site and a
good place to start learning more about sound cards. A budget card that
it appears will meet your demands is the Midiman 1010LT or similar model
from other manufacturer.
Kind regards
Peter Larsen
* My site is at: http://www.muyiovatki.dk *

Help required for set up of new Airport Extreme!

I bought a new Airport Extreme and was assured the set up was super easy compared to the Linksys wireless router I had previously. With my luck, it isn't!
I basically never get to the first step of the airport utility because either the wireless connection can't be found, or the Airport Express can't be found by my computer (I get either of the two error messages). I am able to see the airport xxxxxxx network, but get the error messages even when the computer's airport eventually connects to it. Can someone help and tell me what I am doing wrong? I have tried resetting my internet modem and the Airport Extreme to no avail, I always get the yellow amber flashing light.
Thank you

SEE MY ANSWERS BELOW:
System Preferences > Network > AirPort > Advanced > AirPort tab
o Your network should show up in the list under Preferred Networks with Security = None CHECK
o Remember any network this computer has joined (checked)
System Preferences > Network > AirPort > Advanced > TCP/IP tab
o Configure IPv4 = Using DHCP CHECK - CHANGED IT
o Configure IPv6 Automatically CHECK - CHANGED IT
System Preferences > Network > AirPort > Advanced > DNS tab
o DNS Servers = (your ISP's DNS server(s) IP address(es) should be displayed here) If this is blank, may be the reason that you are not able to access the Internet when connected wirelessly ... and may indicate a problem with the AirPort card in your iBook I CAN SEE 3 SERIES OF CODES
Following this, I can still find my network, connect to it (although I got a timeout the first couple of times) but still have no internet access. The airport has been working fine when I was using the Linksys in the past.
Can we try anything else?

I Need Help For Setting Up A New Account

So, obviously in Mail, I have my .Mac Account. I would also like to add my MSN hotmail account. There are only a couple of issues. I can't figure out if the hotmail account is POP, IMAP, or Exchange. And on top of that, I don't know what to put after I've chosen one. There is a space where I'm supposed to put the "Incoming mail sever", except, I have no idea what that is. If it is relevant, my hotmail email is: [email protected]
Thank You

http://versiontracker.com/dyn/moreinfo/macosx/18189
was the solution I used to use, back when I thought it was still a good idea to use msn/hotmail

Getting a Calendar in Concurrent Request for input of parameters

I was wondering if anyone knew of a way to show a calendar for a date parameter when running a report set up as a concurrent request?

Were you able to solve this..?? i am gettin ghte same problem. could you please help me?

Passing Delivery option to child concurrent request

hi, we have a concurrent request(parent) using SQL to call a new concurrent request (child),
Since if we run the parant with email delivery option , the parent call the child to execute. But the email sent the parent output, we actually want the child's output.
So I would like to ask can passing the delivery option from parent to child in the SQL?
Any sample for references?
Many thanks.

user572941 wrote:
I am using forms personalization to give the user the ability to submit a concurrent request from the 'Actions' menu of the form. I would like to be able to pass a field from the form to a parameter of the concurrent request. I know how to set a global variable using forms personalization. Does anyone know how I could use this variable as the default value for the parameter in the concurrent request? (e.g. The concurrent program uses PO number as a parameter - I'd like to be able to pass the PO number from the form to the concurrent request.)Please see if old threads (which discuss the same topic) help -- https://forums.oracle.com/forums/search.jspa?threadID=&q=Forms+AND+personalization+AND+Parameter&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

Why does setting up a new eprint address procedure reach a dead end?

UPDATE 2012 03 08 Thursday
About 30 minutes after posting this message, I starting trying again. I was having the same problems. Eventually, I started to get suggestions for names - a list of about 6 - after clicking CHECK. But, then when I would try those names - they didn't work. Then I tried the name I had originally wanted - and bingo! The dialog box returned a message saying the name was available. There was also a SAVE button in the dialog window. I saved it, the dialog window closed, and the intial page refreshed automatically showing the new address.
Yay! But, should I have had to go through all of that? And then, logging back into these forums! There were renewed difficulties. I had to - once again - change my password. Which I had to do to post my original message below.
Anyhow, I still think this process needs to be addressed. It shouldn't be so troublesome.
ORIGINAL POST
I am trying to personalize the eprint email address for my HP Officejet 7500A Wide format printer.
( Although, I think the model has nothing to do with the problem in general. )
I had little trouble signing in to the eprint centre and forums. Yay!
( I had some trouble, but that's another story.)
Step 1. I found the page for setting up a new address. My initially issued address is displayed correctly. (hidden here by me) And I clicked the 'Change' button. (under arrow)
Step 2. I saw my initial address correctly in the dialog box and window that popped. (above arrow)
(There are some browser display problems with that dialog window, but, again, that's another problem.)
Step 3. I enter a 'new' address conforming to the naming rules. And, click 'Check' button.
Step 4. A useless 'dialog' window appears. There's no message - no 'save' - no 'accept' - no 'change' button...the only option is to click the X and close the window.
(Yes, I tried various names. Yes, I tried waiting various times. No, I'm not an idiot.)
Step 5.I saw my original address is unchanged.
I tried the 'Refresh' button.
My browser window refreshes.
The address is the same.
Step 6. I clicked 'Refresh' again. I checked my email for confirmation of the change or a request to authorize a change or something that would make sense.
( I started to think bad things.)
Step 7. I searched the various forums, with various keywords without any luck. So, here we are. A new post.
Any constructive help in solving this problem will be appreciated. I have very high to superior computer and networking skills, so uninformed gibberish about 'firewall' 'browser' 'personal hygiene' or similar, will be ignored. TY

Hi HW,
The PBX is a Panasonic TA308. There is no special interface to the PBX, the line port on the SPA3102 is simply plugged into an extension, like another phone. Anyone calling that extension will have the call routed through the SPA & PAP2 to the remote phone.
The whole setup is totally seamless, & transparent to the user. As we are on a local network there is virtually no latency. There is a slight tendancy to echo, but the echo suppression mostly takes care of that.
THis has been a good exercise, and once I got my head around what I was trying to do, with your help, it was pretty easy. I think the hook flash timing would be the thing which gives most users a problem, as it seems to vary widely around the world. I was surprised at the difference between the US and NZ (.1 & .9 to .07 & .13). There didn't seem to be any other critical differences.
Now I am the local expert on VoIP "In the Kingdom of the blind, the one-eyed man is King."

Forms personalization - passing a parameter to a concurrent request

I am using forms personalization to give the user the ability to submit a concurrent request from the 'Actions' menu of the form. I would like to be able to pass a field from the form to a parameter of the concurrent request. I know how to set a global variable using forms personalization. Does anyone know how I could use this variable as the default value for the parameter in the concurrent request? (e.g. The concurrent program uses PO number as a parameter - I'd like to be able to pass the PO number from the form to the concurrent request.)

user572941 wrote:
I am using forms personalization to give the user the ability to submit a concurrent request from the 'Actions' menu of the form. I would like to be able to pass a field from the form to a parameter of the concurrent request. I know how to set a global variable using forms personalization. Does anyone know how I could use this variable as the default value for the parameter in the concurrent request? (e.g. The concurrent program uses PO number as a parameter - I'd like to be able to pass the PO number from the form to the concurrent request.)Please see if old threads (which discuss the same topic) help -- https://forums.oracle.com/forums/search.jspa?threadID=&q=Forms+AND+personalization+AND+Parameter&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

How to find a concurrent request's responsibility of the FND user

How to find a concurrent request's responsibility of the OA user who submitted?
For example, I have a concurrent request id: 123, I know user A submitted,
I want to know user A's Responsibility when submitting the request id: 123.
Thanks

Hi,
I'm not sure about this, but can you check whether FND_CONCURRENT_REQUESTS.RESPONSIBILITY_ID provides you with the RESPONSIBILITY_ID of the user from which the request is triggered ? If yes, joining this with FND_RESPONSIBILITY_VL.RESPONSIBILITY_NAME can give you the name of the executing responsibility.
Regards,
Rakesh.

How to create a documentation for Badi?

Hi All,
how to create a documentation for Badi?
This step is requested in the OSS note, but not explained how to perform it...
Thanks and regards,
Alex.

Hi All,
solved. created in SE18
I noticed, that it is also possible to create such documentation in SE61 *** well,
Document Class Implementation Guide chapter (SIMG)
Chapter SIMG
Also the translation of documentation could be done in such way:
SE63--->Translation--->ABAP OBjects--->Transport object:
R3TR DSYS SIMGbadi_name_goes_here
Regards,
Alex

Forcing users to select existing properties in New User Request form

Hi,
We have just started using Service Manager and Orchestrator. So far we have successfully managed to create user accounts using orchestrator and service manager. Now we want to start forcing users to utilise the information we already have in
our existing Active Directory environment.
So for example, in the new user request form we want users to select an existing "office" using the attributes already in Active Directory as opposed to allowing them to type in an office and potentially accidentally misspelling the office name.
What we would like to see is a unique list of offices and a user to select
How can this be achieved? Any help would be greatly appreciated.
Thanks

Well, if you don't want to create a list manually, create a sealed management pack that defines the root of the new enumerator. Then create a workflow that will pull all users from AD, build the list of the locations used in AD and update the child enumerators
if required.
Cheers,
Marat
Site: www.scutils.com
Twitter: LinkedIn:
Graveyard:

Documentation for setting up a new concurrent request

Similar Messages

Maybe you are looking for