Documents edited with added text and sketch not shown while emailing in iPad 2.

Documents edited with added text and sketch not shown while emailing in iPad 2.

Hi Rakmana,
This is most likely an issue with Apple's iOS Mail program's.
I think you are opening your modified PDF in Apple built-in PDF Preview. Apple's code does not properly draw the comments, but if you look at the PDF in virtually any other PDF application that isn't just using Apple''s code, or on any desktop computer, you will see the comments you've added.
Thanks
-Satyadev

Similar Messages

  • NECE print type Email Text and Body not comming in Email

    Hi,
    We have maintain Email text and Body in NECE for email body.
    But while , we are checking in email , Invoice is coming as attachement, email body is not apprearing in email .
    what to do?
    Regadrs,
    Waqkas

    Hi Silvia,
    I have maintained text for email body in specific output type for Invoice
    In NACE transaction , in V3 Billing , I have Output type RD0M, in that I have maintained
    email Body.
    But on the time of generating the Invoice email for Vendor , only Invoice is going in email as attachement,
    Email Body which I have maintained in NACE is not coming .
    Any Suggestion ?
    Re,
    Waqkas

  • I am planning to buy an ipad mini wifi 16gb because i really want a tablet with high graphics and high loaded games support so is ipad mini wifi 16gb best for gaming ? because i own a samsung galaxy tab 3 and it is worst even it lag and stucks !

    is ipad mini is capable to run high graphics and high loaded games with no lag and will not stuck while playing high graphics / loaded game ?
    tell me i want your suggestions !

    is ipad mini is capable to run high graphics and high loaded games with no lag and will not stuck while playing high graphics / loaded game ?
    tell me i want your suggestions !

  • I want to make a textfield non editable with blinking cursor,and the text is input from a custom keypad

    I want to make a textfield non editable with blinking cursor,and the text is input from a custom keypad....
    Please Help me.
    I want to make a numpad of my own from which i can set the text but i want the user to tap in between the text..

    You seem to stop the while loop to run the following code, then the program ends. Are you running this using the "continuous run" button????
    You need one big while loop containing the acquisition, then you build up the history data in a shift register. Clicking "save" will save the data, but not stop the loop.
    Why did you place a time-control in the FOR loop??? This is just post-processing so it should just do it without any delays. I don't understand the logic in the FOR loop. You are appending arrays, but then you delete the first element at each iteraction constantly trimming data from the beginning of the appended array. Then you autoindex at the output tunnel heavily duplicating all data. Ths make s no sense!
    Can you explain how you want you data saved?
    Message Edited by altenbach on 12-16-2005 11:20 AM
    LabVIEW Champion . Do more with less code and in less time .

  • How to deal with "There was an error opening this document, the file is damaged and could not be"

    Hello, everyone:
    I open one pdf document with Adobe Reader 9.3, but it appeared that "There was an error opening this document, the file is damaged and could not be repaired".. and I found that another several pdf document in the same folder that I have not opened for a long time is also "damaged and could not be repaired".
    But in the same folder, other documents of different types are ok, does that mean there is something wrong with my hard drive?
    Has anyone else run into this issue or have any suggestions?
    Thank you very much

    It could be that the directory is damaged. It could be that at one time you had a virus that did damage, it is hard to say. Do you have a good backup?

  • When printing from Preview, the document prints with large print and many lines added and pages added

    When printing from Preview, the document prints with large print and many lines added and pages added. Why does this happen?

    Thank you!!! That was the problem--scale was set at 200% (don't know why)--when I reduced it to 100% it printed perfectly.
    Thanks again for helping me resolve this problem.

  • Sometimes a web page appears with only text and no picures. It is not always the same site and does not always happen. If I switch to Explorer for the same web site it always works

    Sometimes a web page appears with only text and no picures. It is not always the same site and does not always happen. If I switch to Explorer for the same web site it always works

    Thank you, it worked with just F5. I don't know whether CTRL + F5 would work because the problem has not come back yet!

  • Added text & signatures do not print correctly

    I am using Acrobat Reader v10.4.4 on my iPad Mini with IOS 6.1.2 and am having issues printing. I can open any PDF and have it displayed correctly. I can add text and signatures and the document is saved correctly because it can be opened after the changes are made and they are still there. When I try to print the document where I have added text and signatures to, the document does not print correctly. All of the text and the signature are shrunk to a very small size and appear in the lower left hand of the page.
    I depend on my apps to work they way they should and having this issue makes my work very hard. I have to be very creative and perform unnecessary steps to get my PDF's to print the way they should. Does anyone have some insight in to this bug?

    Hi,
    Thanks for reporting this issue. We would like to investigate this issue at our end and if you could share one such pdf file in which you are facing the issue at [email protected], that would greatly help us.
    Thanks,
    Ankit

  • Acrobat 11 there was an error opening this document. the file is damaged and could not be repaired

    we are receiving an error when opening certain pdfs saying "there was an error opening this document. the file is damaged and could not be repaired"
    i've tried a few things to fix this issue with no luck
    tried on a brand new windows 7 install without any added software like anti-virus software, etc
    tried on my home pc (I forwarded the document from my work pc to my home pc and still receiving the same error)
    don't think it's anything related to the computers, thinking it's more an issue with the pdf. i've tried the basics like deleting temp files from IE, going to %temp% and deleting that out, doing an acrobat repair, trying in reader instead of acrobat, updating users from acrobat 10 to 11, and still receiving the same issue. the odd thing is, some people can open this document and some receive the error. the other thing is i've tried alternative pdf programs with no avail, same errors from those as well
    i work on the helpdesk with one other person  for the company and not sure what else we can try
    don't think this is a pc issue - tried on pcs in the company, home pcs, personal pcs and all get this error
    got to be an issue with either the pdf, or the way its being sent
    i did reach out to OUR e-mail team here (lotus notes admin) and they've ruled out anything as far as an encryption causing the conflict may go, so notes isn't the issue either
    would it be possible it's on the persons end that's sending the file?

    Unfortunately, CR 10.5 is not supported on WIN 2012 Server. See this wiki for more details. In order to work in a supported environment you will have to upgrade to CR 2008 Service pack 7, or SAP Crystal Reports, developer version for Microsoft Visual Studio (2010 / 2012 / 2013).
    - Ludek
    Senior Support Engineer AGS Product Support, Global Support Center Canada
    Follow us on Twitter

  • Which version doesn't produce this error: "there was an error opening this document. the file is damanged and could not be repaired"?

    This error message occasionally occurs with Acrobat 5 on XP 2.  However the same files can be opened with Acrobat 6.0.4 on Win98(se2).
         "There was an error opening this document. the file is damanged and could not be repaired."
    I'd like ot upgrade 5 on my XP system, but have read many posts complaining about the same error with newer versions.
    Is there a version that never produces this error on files that aren't actually damaged? And has anyone figured out what produces this error? (The posts I've seen suggest solutions that don't seem to work.)
    Thanks.
    Ellen

    Thanks, Prasanth.
    I've read posts about this problem happening on all versions, and wanted to see if it was least likely to happen in one version.
    I just need the basic function - the ability to read a pdf file.
    Of course, it seems to be a problem only for some, and there's no way of knowing the extent, so I will try an upgrade or two.
    Ellen

  • Item text and item note are not transfering from SRM to ECC on to PR

    Hello Expers!!!
    Due to some requirement we added some logic in BBP_CREATE_BE_RQ_NEW to print the used ID of the shopping cart creator on PR under item text requisitioner tab. but after moving these changes to production the item text(Vendor text) and item note(internal note) which are maintained in the shopping cart are not printing on the Purchase requisition under item text and item note tabs. these two texts were printing correctly before moving our changes.
    please suggest me how this item note and item text will print on PR. Is it a standard functionlity in SRM 5.0?
    is this because of move over changes?
    suggest me to resolve the issue....
    thanks in advance...
    Regards,
    CD Reddy

    Dear Poster,
    As no response has been provided to the thread in some time I must assume the issue is resolved, if the question is still valid please create a new thread rephrasing the query and providing as much data as possible to promote response from the community.
    Best Regards,
    SDN SRM Moderation Team

  • There was an error opening this document. the file is damaged and could not

    Dear all, I am simpley reading pdf file & producing to browser with this servlet
    ( which i got this from same forum)
    import javax.servlet.*;
    import javax.servlet.http.*;
    import java.io.*;
    public class Isotest2 extends HttpServlet
    public void doGet(HttpServletRequest request, HttpServletResponse response)
    throws ServletException, java.io.IOException
    //String file = request.getParameter("file");
    String file = new String("d:/xyz.pdf");
    if (file != null)
    File f = new File(file);
    if (f.isDirectory())
    //Do something that identifies the file as a directory...
    } else
    //otherwise, open a stram, and begin the download...
    InputStream input = new FileInputStream(f);
    response.setContentType("application/pdf");
    response.setBufferSize(8192);
    response.setHeader("Content-Disposition","attachment; filename=\"" + f.getName() + "\"");
    OutputStream output = response.getOutputStream();
    int count = -1;
    byte[] buffer = new byte[8192];
    while((count=input.read(buffer))!= -1)
    output.write(buffer, 0, count-1);
    output.close();
    input.close();
    but it is unable to open pdf file giving error
    "There was an error opening this document. the file is damaged and could not be reapired"
    what is the problem? [ PDF  file is not damaged !]
    pls help me out
    thanks

    Probably because you aren't writing the last byte read every time through the while loop.

  • When I open my MacBook Air the keyboard comes up along with the screen and does not stay still?!

    When I open my MacBook Air the keyboard comes up along with the screen and does not stay still. So I need to hold down the keyboard while i open it. Other than that it works fine despite the fact that the fan noise some times is loud and sometimes it's getting warm at the base. I wonder if this can be fixed if i go to one of the apple branches.

    Yes. Take the computer to the Apple store to have it fixed.
    Best

  • I pressed the wrong button when setting up my new iphone - i clicked set it up as a new iphone not restore from my old one - now i have lost my texts and my notes! help?from my

    When i synced my new iphone to my pc i clicked the wrong button - instead of restoring it from my old phone's last backup i clicked set up as new iphne - now it appears all my old texts and my notes have gone. Any ideas how I can get them back?

    When you plug it into iTunes - it will show on the left side of the screen.  Right click on it, and you will have a list of restores to use.  Pick the one you want, and it will pull all of that data.  It worked on mine...

  • HT4061 good morning! I just did a software update on my phone (finally) last night and now my phone will not come on.  All it keeps showing is the charger pointing up to a blue circle with iTunes inside and will not go any further.  Can ANYone please expl

    Good Morning,
    I just did a software update on my phone (finally) last night and now my phone will not come on.  It keeps showing the charger pointing up to a blue circle with iTunes inside and will not go any further.  Can ANYONE help me please???

    The phone is in restore mode and the picture is telling you what to do. Connect the phone, by cable, to iTunes in the computer you normally use for syncing, and retore the phone.

Maybe you are looking for