Documents that I open are immediately "changed" by Indesign

Since the newest update of Indesign (2014.1), all the documents that I open are immediately "changed" by Indesign for some reason, so I have to save those documents again.
If I open a document just to take a look at it and I want to close it, I get the question to save my document.
I have tested this with brand new documents, created in Indesign 2014.1, but the problem remains.
This is occurs every time, with all documents, even after a restart and after trashing the prefs…
Anyone with the same issue?

Hey Kris,
You might go to Edit> Preferences> Zoom
Do this without opening any particular PDF so that it applies to the program itself and not just one document.
Try this and then let me know.
Regards,
Anubha

Similar Messages

  • How do you set the default magnification for Acrobat.  All documents that I open enlarge to 174% and are too big.

    How do you set the default magnification for Acrobat.  All documents that I open enlarge to 174% and are too big.  I see how to change the size after the document is open by going to File/properties/initial view and saving this setting.  I want all documents to open at 100% when they are first opened.  Can I set this as a default view?

    Hey Kris,
    You might go to Edit> Preferences> Zoom
    Do this without opening any particular PDF so that it applies to the program itself and not just one document.
    Try this and then let me know.
    Regards,
    Anubha

  • Xcel documents that onced opened will not and i get an error message

    Xcel documents that once opened will not and i get an error message "the file may be read only or you may be trying to access a read only application. Or, the server the document is stored on may not be responding"

    Without at least knowing the version of MS Office you're using it may be a little difficult. One thing you can check are the permissions of the files, select a file in Finder then select Command I (that's I as in Ivan) and look at the permissions. If necessary change the permissions.
    BTW if you need it there is a Office for Mac Product Forums you can post on too.

  • How to I get multipage pdf file placed in my document to conform to the document that I set up?  I have InDesign cc and the pdf pages are placed outside of my document?

    How to I get multipage pdf file placed in my document to conform to the document that I set up?  I have InDesign cc and the pdf pages are placed outside of my document?

    Hi Rave,
    InDesign cc couldn't open the script, I get an error message that it is not a supported file type.  I tried this first before using the "place multipage pdf" in my InDesign document.  The script which comes with InDesign cc works, but places the pages outside of the document.  That's what I'm trying to figure out how to do.  I had no trouble doing this in PageMaker 15 years ago.  I don't know why it doesn't work on my computer??
    Thanks,
    Yerbamansa

  • Lately, whenever I open a link in a new window, when that window opens it immediately minimizes down to the task bar. This is obviously annoying.

    Lately, whenever I "open a link in a new window", when that window opens it immediately minimizes down to the task bar. This is obviously annoying.

    Hi BigBinAz,
    Try to start firefox in [https://support.mozilla.org/en-US/kb/troubleshoot-extensions-themes-to-fix-problems safe mode], and in [http://kb.mozillazine.org/Safe_mode#Safe_Mode_options Safe Mode options] select ''Continue in Safe Mode'', don't make any changes in safe mode, and check it again.
    '''EDIT''' : "select ''Continue in Safe Mode'', don't make any changes in safe mode" '''there is not an option any more, the safe mode options don't exist any more''', so don't search for safe mode options.
    thank you

  • Is there a way to make a mobile number clickable in an inDesign PDF document, that will open a Texting or Instant Messaging Application?

    Thoughts are to allow groups of individuals mobile numbers to be shared across larger organizations, from within a PDF document, that the mobile numbers would be clickable, and open up a Text or instant messaging application on either the computer, tablet, or smart phone, for instant communication.

    1st, more information will help people help you... Information FAQ http://forums.adobe.com/message/4200840
    2nd, did you do as directed in next link, to be sure your sequence and video match?
    See 2nd post for picture of NEW ITEM process http://forums.adobe.com/message/3776153
    -and a FAQ on sequence setting http://forums.adobe.com/message/3804341
    3rd, what... exactly... are you editing?
    Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
    http://forums.adobe.com/thread/592070?tstart=30
    For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/
    For Mac http://mediainspector.massanti.com/
    4th, buying a 2nd hard drive now does not mean you can't move that drive to a new computer
    http://www.newegg.com/Product/Product.aspx?Item=N82E16822236339 is a good drive

  • How do I password-protect a PDF document that doesn't let me change the security settings?

    I want to password-protect my PDF document (so when I email it, it can only be opened/read by intended recipients as it contains confidential/sensitive information) but when I go into document security, I'm unable to change the Security Method (which is currently set to 'No Security' - not by me).  There's a 'show details' icon but it's grey so I can't click on it.  What can I do to protect this document from being opened by non-intended recipients?

    Ah, yes, I'm using Adobe Reader!  That makes sense.  Thanks so much for your reply.  At the moment, I scan Word documents into my computer and they're automatically converted to PDFs.  If I had Adobe Acrobat on my computer, and scanned in documents, would they open in Reader automatically or could I open them in Acrobat and therefore add password protection?

  • InDesign CS5 crashes when documents that have tables are sent to data merge.

    I have several documents that I have been using for the past 6 months that have tables on some of the pages and when I go to data merge them, CS5 crashes. When I remove the tables, they merge just fine. Some of these documents have to have the tables, so not havaing tables is a problem. I have even tried redoing the tables in Excel, Word & InDesign, but that doesn't seem to work. Is there a setting or something that I am missing?

    Hi, I have this ssue
    I add a table to a data merge document
    I can create a merged indd document ok
    however if i try to export direct to pdf without creating the interim indd document CS5 crashes
    CS5 7.04
    Windows 7 SP 1

  • Finding out that an open file has changed

    Hi. I'm working on a java app to monitor a log file. Unfortunately, when the log file rotation occurs (by moving the file to "log.1" and creating a new "log") I can't figure out how to determine that from my app; the code just goes it's merry way. When the file is renamed, the open file in the java app continues to have access to the original file (under the new name) and if I add lines to the "log.1" file, the java app continues to read them.
    This is on JDK 1.4.0 for Linux, and I'm using a RandomAccessFile object.
    Any ideas? Other than (wastefully) opening a new File everytime through the monitor loop I can't think of a clean solution.
    mike ([email protected])

    use getLastModified date

  • Once Firefox crashes & restarts, homepage opens (not tabs that were open prior to crash) even though "tabs from last time" is selected for when Firefox starts.

    When Firefox crashes and subsequently restarts, the tabs that were open are not restored. I do not get the "well, this is embarrassing" dialogue box that gives me the option to restore tabs. When restarting, Firefox just gives me my home page. This happens even though I have selected under options for Firefox to open previous windows & tabs upon start up.

    Hopefully you still can use History > Restore Previous Session to get back to where you were.
    To restore the regular behavior of resuming your previous session after a crash, you probably need to change one of your preferences back to its default value.
    (1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
    (2) In the filter box, type or paste '''sess''' and pause while the list is filtered
    (3) Double-click '''browser.sessionstore.resume_from_crash''' to switch its value from false to true.
    If you prefer to always get the "this is embarrassing" screen rather than having Firefox re-open all the windows and tabs immediately, also change this preference:
    (4) Double-click '''browser.sessionstore.max_resumed_crashes''' and change the value from 1 to 0.
    Hope that helps in the unfortunate event that you have a crash!

  • After installing update for Pages 5.0.1 documents won't open

    Hi,
    Was running Pages 4.3 on Maverrick 10.9.1
    I got a notification that an update was available. I clicked to update the application. Pages 5.0.1 was installed. It launches. It seems I can create new documents as well.
    However, I’m unable to open my previous documents. Moreover, I can’t seem to open them with the old Pages version (4.3) either. When I right-click the icon in the dock, the old documents that were open when the update occurs are listed. But I can’t get them on screen.
    Is there a cache to clear? Shall I restart? Any suggestions will be appreciated.
    P.

    A restart solved the issue.

  • About half the sites I open crash immediately.

    iMac OS 10.6.4
    Fire Fox 3.5.5
    After upgrading to an iMac and upgrading all my software, about half the web pages that I open crash immediately. Yes, I've checked your site for a solution. The sites open in Safari. This window that I'm filling in right now does not display right; it's squeezed and has overlapping text.
    How come no one answered my first inquire of a couple of days ago?
    Where do I go to get my solution?
    You request "URL of Affected Sites (plural), but I can only put one site in the box.
    In your educated gusses, why is "The Quick Time Plug in the only one listed?
    Thanks, Bob Rosenbdrry
    == URL of affected sites ==
    http://fis.com/fis/worldnews/index.asp?l=e

    It probably doesn't have anything to do with Firefox. I thought some kind Samaritan would know the answer.
    Ray Schnur

  • Need assistance with document failing to open

    I have a document that I open every day.  This morning I get the message 'unable to open document'.  It's only happening with this one document - even the copies I restore from Time Capsule.  Any help would be greatly appreciated.

    You can't remember back to late last year?
    The list of problems and deficiencies is long and well documented here.
    I suppose it really depends on how many files you have and what they contain. Exporting to Pages '09 is not always succesful.
    How much do you value your work?
    Pages 5 is just a beta, but Apple hasn't told you.
    Peter

  • Since installing Mavericks on my MacBook Pro, I have many (not all) documents that cannot be opened in either Pages '09 or Pages 5.  They show on my doc lists, but are greyed out so I can't try to change extensions or anything else.  Some are PDFs.

    Since installing Mavericks on my MacBook Pro, I have many documents, but not all, that cannot be opened in either Pages 5 or in Pages '09.  The names show in my document lists, but are greyed out.  They do not show any extensions, but I'm sure at seast some of them are PDFs.  As I cannot open them, I am unable to try to experiment with any solutions - I am not tech savvy, but can sometimes fix things by trial and error.  I have no issues with sharing documents as I have no other devices.  I just want to be able to open my saved documents!  Also, the documents I can open have to be persistently coaxed to open to a point that it is extremely aggravating.  I am not so happy with this recent "upgrade."  Any advice would be greatly appreciated.

    You use Finder to find stuff. It is what you use to look at where your files are kept and to rename, move or trash them. If you double click on a file in Finder it finds the right software to open it for you.
    To open particular files you use the right software for each type. Usually, but not always, the software that made the file.
    Pages opens files ending in .pages. Also .txt, .rtf, and doc.
    Pages 5 is the latest (but certainly not the greatest) version of Pages. It has trouble opening all sorts of files including the older Pages '09 files but it will still do it.
    Unfortunately Apple has chosen for Pages 5 to also save its files as exactly the same file extension .pages despite it being a different format that can not be opened by the older Pages '09.
    As we all know Apple is wise and great beyond belief and would not do something that on the face of it looks extraordinarily stupid and shortsighted. Therefore we know that it must be our fault and we are not holding the software right. Because we are bad users, we must be punished, by either having to use Pages 5 or jump through hoops to avoid using Pages 5.
    If you have installed Pages 5 any .pages file (old or new) will be opened by Pages 5. If you then save the file, Pages 5 will change the file format. So don't open your files with Pages 5 and don't save them if you do.
    To stop Pages 5 opening and resaving your old files, you need to drag it to the trash and empty it.
    When it is no longer around to annoy you, you can go back to using Pages 09.
    Peter

  • Opening documents that are in a book (CS4, JS)

    Hello,
    Just had a quick look through the ESTK object model and I couldn't see a way of opening a document that's in a book, through the book (so the non-script action would involve opening the book file then double-clicking the relevant document). I can obivously get the file path of a document in the book and open it another way, but I'm trying to avoid getting the 'document modified outside of book' error triangle when processing and saving documents that are in a book.
    If anyone has any pearls of wisdom, I'm all ears.
    Thanks.

    Murral wrote:
    ... I can obivously get the file path of a document in the book and open it another way, but I'm trying to avoid getting the 'document modified outside of book' error triangle when processing and saving documents that are in a book.
    What am I missing here? If you have a book opened and you can check which documents it contains (using BookContents) and optionally open them, you can also safely change and save those docs. No warning triangles -- because the book is also openen, and it'll notice the changes.
    Only if you do something unexpected, such as open the book, open a document from the book, then close the book ... before committing your changes ... it'll gain its yellie triangle. But then again, it'd do the same if you do that manually.

Maybe you are looking for

  • How can I get a Book to fully sync with my iPhone?

    I downloaded a free book to my MBP. When I attempt to sync it with my iPhone, there is a black horizontal line at the bottom of the book that does not go away. The book will not open on my iPhone, and I am not able to delete it. I have deleted the bo

  • How to not display time in adf Calendar events?

    Hello everyone, I am using JDeveloper Studio Edition Version 11.1.2.3.0 I created a calendar component in my application based on a table that fulfills the variables needed by the calendar (Start date, end date etc). The events in the calendar are al

  • Battery drain - ios6.1

    My iPhone5 battery has been draining very fast! It used to last more than 24hrs during my normal work day. But soon after 6.1 upgrade, it lasts hardly 6hrs. Hopefully apple will release a new fix soon. Anyone else having similar issues? I am still a

  • Oracle 11g spatial database

    Am new to spatial data of oracle... the oracle manual mentions the following steps in order : 1)Creates a table to hold the spatial data. 2) Inserts rows for areas of interest. 3) Updates the USER_SDO_GEOM_METADATA view to reflect the dimensional inf

  • NewBie's Simple XML Question

    Hi Friends, I am starting to learn "xml"..got the complete reference book.But can someone please tell me how to start with it.i have a *.xml file and a *.xsl file.I am trying to call the xml file in my browser..but the xml file contents shows up..wit