Doe Not Print

I have a Canon MX920 printer. Recently reinstalled drivers. I replaced a Canon ink cartridge with a "knock-off" which was instantly recognized. All ink levels look good on the printer read-out. Documents are blank when printing function is completed. What can be the problem? If the problem was with the cartridge - why wouldn't that problem be recognized? Thank you -
Solved!
Go to Solution.

I am replying to my own post. It appears that the knock off ink is just fine. The printer erroneously did not report that the ink level was too low on my large black cartridge. Fixed!

Similar Messages

Using Windows XP and Firefox 3.6.15 web pages print with some of the script as unintelligible weird looking script or maybe some kind of computer script. This doe not accure usingg IE 8.0 with the same printer.

Using Windows XP and Firefox 3.6.15 web pages print with some of the script as unintelligible weird looking script or maybe some kind of computer script. This problem also occurs with the web page on which this question is submitted. This doe not occur using IE 8.0 with the same printer.

These have nothing to do with Firefox.
C:\ProgramData\FLEXnet\Connect
\11\ISUSPM.exe
and
C:\Users\Vinegarhill-User Acc\Desktop\Malware Removal Programs\eXplorer.exe
This one - C:\Users\Vinegarhill-User Acc\AppData\Roaming\Mozilla\Firefox\Profiles\ak4dv58c.default\extensions\ \components\afom.exe - is probably the '''AFOM - Memory Recovery & Retention For Firefox Only''' extension.
https://addons.mozilla.org/en-US/firefox/addon/11922/
My advice is to uninstall that extension. IMO, you have too many extensions installed, and are asking for problems with Firefox. I am not against using a lot of extensions in Firefox ''(I typically have 45 to 50 extensions installed, but the mix of extensions you have scares me as potentially problematic.)''

IPhoto 6.0.6 text not printed on cards and book

I bought via iPhoto cards and entered texts. The text was not printed when I received it. A few days later ordered a hardcopy book : same problem.
All texts are missing except the text on the cover of the book. What can it be ?
Message was edited by: mardge

Mardge
Welcome to the Apple user discussion forums
Report the problem to Apple - they will refund your cost and may have a solution
US page - you probably should search for the returns page for Belgium - http://www.apple.com/support/photoservices/returns/
Did you preview the book and the card before sending - http://support.apple.com/kb/HT1040 ?
Doe the preview show the text?
Is there anything unusual about the text that did not print?
LN

C 6180 does not print pictures from camera or computer

C 6180 does not print pictures from camera or computer.

I suggest fixing it
If you would like to give us some information beyond it doe not work there is a a good chance someone can give you more advice on how to fix it
Like what version of iPhoto - what happens, error messages, any strange that has happened, etc
Just remember we are users just like you who know nothing except what you tell us so details are critical
LN

Color LaserJet Pro MFP M176n installed but not printing

Hello Everyone,
I have problem with my printer Color LaserJet Pro MFP M176n.
at thebegining i try to install it buteverytime i run the installer it give me HP Installer error, so i installed the Microsoft Net Framework 3.5 and run the install and it was working perfict, i install the driver on USB cable and after it show me successfull and print test page and finish, so i click print test page and in printer and fax the printer M176n Show 1 printing job and then 0 but no print came out i try again same, i remove the cable and plug it again the printer is responding perfictly but still not printing i check the scanner and its working fine but only the printing is not, so i try to install it through network and it was sccessfully installed with IP but when i print, still the same 1 printing Job but nothing came out of the printer when it came 0 printing job.
Please help......
- Windows is windows XP 32bit
- Printer name Color LaserJet Pro MFP M176n PCLms
Thanks
I did try to use Scan Doctor, the printer didnt print at the first check but when it ask forenternal print test page it printed then it ask me toif it print of not and i click yes it print in enternal print so it ask me to remove and reinstall so i did 2 to 3 times and still same will not print but when run Scan doctor it will print on enternal print .....
Wael Hilal

Hello @ Averus89,
Welcome to the HP forum. 
I understand you have done quite a lot to resolve your M176n and its connection to the ePrint service. 
I would like to help you with this issue. 
If the printer is not printing the web services info sheet, or allowing you to add it to HP Connected, I
would set a manual DNS. 
I wont go into great detail about setting this up. From your post, I feel you know your way around the printer and your network. If I am mistaken, let me know. I will go into detail. 
The DNS to try is:
Primary: 209.244.0.3
Secondary: 209.244.0.4
Set the DNS then try printing the web services info page again.
Let me know if this helps.
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

HP Laserjet 4100 on network will not print

Since I’ve installed Snow Leopard, I have not been able to print with my HP Laserjet 4100.
My set-up: new 24” iMac, many hard drives and more. Two devices: HP Color Laserjet 5550 and HP Officejet J5750 are connected to the iMac through a USB Hub. Although initially scanning did not work with the J5750, I was able to make that work once additional drivers were downloaded from HP. Both work fine.
I also have an older HP Laserjet 4100 which has been my steady workhorse for years. It only has Ethernet and serial port outlets. It is connected to an AT&T 2-Wired Ethernet Hub/DSL Modem (model 2701HG-B) that is connected to the iMac.
I’ve contacted HP and Apple about this problem. None of the three people I worked with at Apple could help and the HP representative was unsure if they could help but that it would cost me $40 to find out. According to HP website, since Apple Talk no longer exists, we are required to input the IP for the device. For the 4100, the IP address is 10.0.1.100. I tried this two ways: in the “Add Printer” window under “IP,” inputted as the IPP, and inputted as the HP Jetdirect Socket (as per the HP instructions). When this is done, the printer shows up when you give a print command. However, it does not show up in the “Add Printer” window under “default” or anywhere else.
Status: If I connect the 4100 Ethernet cable directly to the back of the iMac, the “Supply” level indicates the true level of toner in the 4100. However, it will not print. If I connect the 4100 Ethernet cable to the Ethernet hub, the supply level does not show nor can I print.
Any suggestions?

I am struggling with the same problem. I have two HP 4100dtn printers on ethernet. Each has a manually assigned IP address. I can set up the printer(s) just fine in the Print & Fax Preference and Snow Leopard finds the printer just fine when I enter the IP address and chooses the correct HP Driver.
When I try to print, my print job appears in the queue as expected, than an error appears that something about a "bad command". Sorry, I'm home right now and don't have direct access to the printer so I can't give you the precise language of the message, but the gist of the message is that the system tried to connect to the printer to send the print data but the printer does not know how to respond to the command that was sent.
It's as if the firmware in the 4100 just doesn't have something in it's lexicon that Snow Leopard needs. The HP web site is no help. One page I found says the printer is supported (http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&obje ctID=c01664444&jumpid=regR1002USEN ) and another page I found says that it is not supported (http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&obje ctID=c01879014&jumpid=regR1002USEN). The HP on line chat won't let me log in and hold a chat with HP unless I know the Serial Number of the printer, which I don't have here at home.
More to follow tomorrow.
Anyone have any ideas?

HP Laserjet 4100 will not print in Snow Leopard

Since I’ve installed Snow Leopard, I have not been able to print with my HP Laserjet 4100.
My set-up: new 24” iMac, many hard drives and more. Two devices: HP Color Laserjet 5550 and HP Officejet J5750 are connected to the iMac through a USB Hub. Although initially scanning did not work with the J5750, I was able to make that work once additional drivers were downloaded from HP. Both work fine.
I also have an older HP Laserjet 4100 which has been my steady workhorse for years. It only has Ethernet and serial port outlets. It is connected to an AT&T 2-Wired Ethernet Hub/DSL Modem (model 2701HG-B) that is connected to the iMac.
I’ve contacted HP and Apple about this problem. None of the three people I worked with at Apple could help and the HP representative was unsure if they could help but that it would cost me $40 to find out. According to HP website, since Apple Talk no longer exists, we are required to input the IP for the device. For the 4100, the IP address is 10.0.1.100. I tried this two ways: in the “Add Printer” window under “IP,” inputted as the IPP, and inputted as the HP Jetdirect Socket (as per the HP instructions). When this is done, the printer shows up when you give a print command. However, it does not show up in the “Add Printer” window under “default” or anywhere else.
Status: If I connect the 4100 Ethernet cable directly to the back of the iMac, the “Supply” level indicates the true level of toner in the 4100. However, it will not print. If I connect the 4100 Ethernet cable to the Ethernet hub, the supply level does not show nor can I print.
Any suggestions?
Chuck Stewart
< Edited by Host >

Well, another week has gone by without a solution.
Again, here is the problem:
I have a 24" iMac connected to a USB hub and an AT&T 2-Wire DSL/ethernet hub. When I upgraded to Snow Leopard 10.6.1 and now the update 10.6.2, the two printers on the USB hub work fine but the HP Laserjet 4100dtn does not print. This old printer has only ethernet or serial ports. I've downloaded and installed the HP driver updates from Apple and HP to no avail. According to HP, I must add the 4100 manually using its IP. I've followed the instructions while adding a printer to select IP- HP Jetdirect - Socket. The address of the printer is 10.0.1.100. When I type this in, the window says that this is a valid and complete address. It searches and then says the "Print Using:" is a Generic PostScript Printer. The driver for this printer, I believe, should be "HP LaserJet 4100 Series v.3010.107" Regardless, when I click Add the window "Determining Installable Options" shows "Status: Connecting to printer..." It never establishes a connection.
The 2-Wire DSL/Ethernet Hub/Modem, has an IP of 192.1687.1.66, Submask 255.255.255.0 and Router (DNS) 192.168.1.254.
If I plug the ethernet cable directly from the printer to the iMac, the supply level shows correctly but will not print. If I plug the ethernet cable from the printer to the 2-Wire and then to the iMac, it neither shows supply level nor prints.
Any suggestion as to how to fix this problem? (I've been on the phone with 3 different Apple respresentatives and 1 HP representative with no success.)

Officejet Pro 8600 - Macbook Pro and Macbook Air will not print

Products:
HP Officejet Pro 8600
Macbook Pro (Mac OS X, Version 10.7.5)
Macbook Air (OS X, Version 10.8.2)
Question:
Why did my Macs initially print fine, but now will not print at all?
Full Story:
I have a wireless network at my house that consisted of a 30mb cable internet, Netgear 900n, HP Officejet Pro 8600, 2 Dell Laptops with Windows 7, a Lenovo Laptop with Windows 7, and Dell Tower with Windows 7 - All printed just fine.
The HP Officejet 8600 was added to my network about 2 months ago.
I added a Macbook Pro and a Macbook Air about 3 weeks ago. Both Macs printed just fine for about a week. Then suddenly they stopped. I spent about 2 hours on the phone with HP Service, and they finally said it must be my router. So I called Netgear. Netgear was useless! They wanted me to agree to charges for services before they would even discuss the issue.
Due to information provided by HP's service support, and because Netgear will not support their product, I promptly purchased a new router - an Apple Airport Extreme.
The Macs recognize the printer, will print if hardwired via a USB cable, but will not print wirelessly to the Officejet Pro 8600. The PCs print fine.
The frustration that is being felt is compound by the fact that the Macs printed just fine with the Officejet Pro 8600 2 weeks ago, and now the printer just shows "idle"... even with a new router. (see image below)
Please help, I appreciate any support.
As a side note, the HP Service rep was very friendly, and definitely tried to support the HP Product, which is much more than I can say about Netgear.
Thank you,
This question was solved.
View Solution.

Hi,
More likely the issue related with Multicast, which Apple devices relies on to communicate with teh device through the network.
First try unplugging the router for 30 seconds.
Plug it back to the power and wait for 2-3 minutes.
Turn the HP printer Off and back On, then check for any difference.
If the same persists, try changing your router configuration as following
Note: the settings below are not related with the HP product, I provide you the steps as a best effor and those are only based on my own knowledge. you may try modifying the router settings at your own risk:
Open the router configuration page (can be found listed as the Default Gateway by clicking the Wireless icon on the printer, then print a network configuration report.
Click the Advanced tab.
Click the Setup option from the menu, then click on WAN Setup.
Make sure to uncheck the box next to Disable IGMP Proxying and Apply the changes.
Click the LAN Setup on the same Setup menu.
Set the RIP Version as RIP-2 and Apply the changes.
Reboot your router and then check for any change.
I hope you may find that information useful, you may also use the user guide below for further information:
http://www.downloads.netgear.com/files/GDC/WNDR4500/WNDR4500_UM_07DEC2011.pdf
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

In Pages (5.2), in a table, superscript is not only not printing, but not printing the text around it. Bizarre

In Pages (5.2), in a table, superscript is not only not printing, but not printing the text around it. Any answers?

Known issue now for almost 9 months.
Use Pages '09 if you have it.
Peter

I just updated my Ipad 2 last night with iOS 7.04 now I can't print shipping labels from Paypal. I downloaded a different browser, Dolphin, per Paypal's suggestion. Still can not print. It says it has lost connection with the server.help!.

Hello! I updated my Ipad now I can not print USPS labels from Paypal. I used my boss' Ipad not updated and worked fine. I am dependent on my Ipad to print these labels for me. I can print anything else I want, like email or packing slips. Any thoughts? I would go back to the previous version if anyone knows how to do that.

Hello Sapo11,
To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial Forums.
Thanks for your time.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

HP Photosmart 6510 e-All-in-One Printer Does Not Print Black Ink

I have run all the troubleshooting listed from HP and the "check" warrenty doesn't come up blank. I would like to not have to purchase a new printer to fix this any help would be greatly appreciated:
1) Rebooted Printer
2) Installed new printer cartridge (2nd one) - really not happy about this as that represents almost $50 in HP ink
3) Checked venting - Not the problem
4) From Tools ran head cleaner - still only prints colors (or grey)
I've liked HP printers for a long time, but after reading the forums I'm really seeing an issue with the model I puchased. I don't mind purchasing HP ink and my printer isn't a high volume use printer so I expect it to last beyond 1 year 1 day.
I have the SN and product number available if a tech needs.
Chris

Hi @crfldf
Have you completed all of the steps in the following document; Printer Does Not Print Black Ink or Color Ink, or Prints Blank Pages.
Although I hope this resolves the issue, it might not. If the issue persists, please post back with your warranty status. Use the following link to check your warranty.
If your printer is still in warranty, please call HP and explain the issue you are experiencing. The number to call HP is 1-800-474-6836 for Canada and US, or you can Contact HP Worldwide.
If your printer is out of warranty, let me know and I will do my best to help. Thanks. I look forward to hearing from you.
If I hear back from you and you require further assistance, I will send you a private message to gather some information. If I send you a message, you can click the little envelope on the top right hand corner of the forums page to check the message;
- In support of Movember
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Print only allows to save as All Files* - will not print .pdf

Had Reader 9, now 10. Received document, saved as .pdf. Attempted to print this .pdf, but when click Print, document needed to be saved again, but was only giving me format as All Files* to save in. Still did not print. Have checked all Printer settings -still won't print. Conflict in 9 and 10? Do I need to somehow reinstall 9 - as that was working?

Vielen Dank -
but why would the advanced tab change as I never had changed that feature in other .pdf s . Is it default with 10?
Usually the printer shows - Print to file, and allows me to change the format, whether as a .docx, .jpeg or .pdf, but that option wasn't available.
Technology is changing too fast for me to catch up and master!!!!

HP Deskjet 1510 will not print

Hi Everyone,
I am not really tech savy so please be patient.
BEFORE I CONTINUE PLEASE NOTE I HAVE READ OTHER MESSAGES REGARDING THIS TOPIC HOWEVER I AM STILL AT A LOSS.
I have purchased a hp deskjet 1510 printer. I am having trouble printing from a word document or pdf file or a photo etc. I can photocopy however not print.
I have uninstalled the program and reinstalled. I have made sure that the printer is selected as the default printer etc.
If anyone could help, it would be greatly appreciated.
Thanking you in advance.

I am having real problems as well. It will not let me set the 1510 as default printer, telling me its not part of hte network.
I have spend 3 hours looking through this site to find answers and not one person on this site has managed to get a satisfactory answer and an explanation what is wrong. All you keep getting told is uninstall it and it will be fine.
I've uninstalled, re-installed, installed, everything and nothing is working.
Can someone PLEASE sort out what is wrong and provide a proper solution which doesn't involved uninstalling and reinstalling software which should work when we buy the bloody machine.
If I don't get a fix its going back to the shop and I'll buy a canon or an epsom, because the 1510 as it sits is a complete waste of money if you cannot even get the sodding thing to work when you buy it.

HP Deskjet 1510 AIO Not Printing

i recently brought HP Deskjet 1510 AIO and tried to install on my windows. While i never faced any issue with any HP printer, this one is making me mad.
It does scan, copy, alignment test and all but does not print through any program. I tried various solutions but no luck.
I have installed Windows 8.1 on my Mac Air through bootcamp but it should not have any concerns because of it as other printer used to work. It is also working fine in my Apple OS but not in Windows.

This worked for me.
http://h30434.www3.hp.com/t5/Printing-Issues-Troubleshooting/hp-deskjet-1510-series-won-t-print/m-p/...

HT201465 I have installed software for a HP Deskjet 1510 printer but it will not print

I have OS X Yosemite 10.10.3 and I just purchased a HP Deskjet 1510 all-in-one printer. I have installed the software and my computer is picking up the printer but it will not print. I have restarted the computer and it still will not print.

Hello jamesettafromfl,
If you continue to have issues setting up your new printer in Yosemite, you may find the information and troubleshooting steps outlined in the following articles helpful:
OS X Yosemite: Add or remove a printer
OS X Yosemite: Printing troubleshooting
Sincerely,
- Brenden

Doe Not Print

Similar Messages

Maybe you are looking for