Does a 7th generation ipod nano work with windows 8?
we bought a new HP laptop with Windows 8 and are having difficulties wtih our 7th generation Ipod nano's not being recognized by the computer. Is Windows 8 compatible with the Ipod nano 7th generation?
Hello LCREW,
The article linked below provides some useful troubleshooting steps that can help get your iPod to appear in iTunes.
iPod: Appears in Windows but not in iTunes
http://support.apple.com/kb/TS1363
Cheers,
Allen
Similar Messages
-
Does the 7th generation iPod nano have a built in speaker?
does the 7th generation iPod nano have a built in speaker? i have looked through the site and i have not found any results on this and i was just curious if anyone else knows the answer here.
Ya I know, but when i went to the ipod nano page on wikipedia, it is different from the ipod page.
I really am getting confused...
7
16 GB
Slate
Silver
Purple
Pink
Yellow
Green
Blue
(Product) Red Special Edition[note 1]
USB
October 2012
Mac: 10.6.8
Windows: XP
iTunes 10.7 or later
Audio: 30
Video: 3.5[42]
240x432
202 ppi
76.5 mm
39.6 mm
5.4 mm
31 g
(1.1 oz)
New, larger 2.5 inch Multi-Touch screen. Unibody now made of anodized aluminium. Also, with larger screen, supports video playback.
From: http://en.wikipedia.org/wiki/Ipod_nano
seventh
16 GB
USB
12 September 2012
Mac: 10.6
Win: XP
audio: 30
video: 3.5
Revert to tall form factor with larger 2.5" multi-touch screen. Clip removed. Video playback and speakers restored, and Bluetooth added.
From: http://en.wikipedia.org/wiki/Ipod -
Why does the 7th generation ipod nano not have games
I want to know why the 7th generation ipod nano does not come with:
1- games
2- voice memo1. The iPod Nano runs the Pixi operating system, not iOS and has too small a screen for displaying the game and controlling it.
2. Plug in a headset with a microphone: http://manuals.info.apple.com/en_US/ipod_nano_user_guide.pdf page 46.
3. Ignore the answer from AppleRulesTheWorld -
Does the 7th gen iPod Nano work w/Bluetooth 2.1 Speakers?
Does the 7th gen iPod Nano only work with Bluetooth 4.0 compatible speakers or should it also work with Bluetooth 2.1 devices?
No one here would know for sure. Since the Lightning adapter is new it may take awhile before you see any. The adapter works with my Zeppelin so there are some out there that will work. It will not be Apple making it.
-
Why doesn't my fifth generation ipod nano work with my Toyota Yaris?
Hello – The charging feature on my new fifth generation ipod nano doesn’t work with the factory glove compartment adapter that came with my 2008 Toyota Yaris. It plays music, etc but does not charge the ipod when connected.
My third generation nano charged perfectly with my yaris until it was run over and crushed recently. My nano gen 5 replacement doesn’t work the same with my Yaris. Can anyone help?
Steve
[email protected]I cannot say for sure, I don't know anything about the toyota yaris. However, if that system was built to work with older firewire based iPods, then it will not charge new USB based units. There are converters out there you can get do deal with this.
http://www.scosche.com/products/productID/1667
i -
Does the Ipod Nano work with Windows XP SP1???
I studied the system requirements for the ipod nano and there was written, that I need a WinXP with SP2 for it.
Because I use Sound-Software that only works with Windows XP SP1 I have to keep this system, and I now would like to know if that works. Could anyone answer this question??Have you try putting your ipod into disk mode if you need help putting it in disk mode here's a page from apple
of how to put your ipod nano into disk mode: http://support.apple.com/kb/ht1363 -
Does the 7th generation ipod nano have the same storage capacity as the 4th generation ipod nano
Just bought a ipod nano 7th generation to replace my 16gb 4th generation nano as its battery life is getting shorter
Went to load my library on to my new ipod and it could not take all the songs, wheras my 4th generarion had room to spare
so i have had to uncheck a lot of songs to get my new ipod to accept loading
my guess would be around 300 mb
Is this difference right when they are both rated as 16gb and showing on itunes at keast the same storage capacity?Need to add I have restored the ipod twice with no change to storage capacity
'others' is showing
4th gen 119 mb
7th gen 136 mb -
Does the 1st generation ipod Shuffle work with the new iTunes?
I was just trying to sync my old iPod shuffle with iTunes 11 and it won't work. Any help?
Mine works fine...
What do you mean by "it won't work"? It doesn't appear in iTunes? It doesn't sync? It doesn't charge? -
How much music does a 7th generation ipod nano hold?
I know you can't know for sure but if you have nothing other then music how much should it be able to store?
You still can't tell for sure; the number of songs it will hold depends on the iPod's capacity as well as the length and bitrate of each song.
(109238) -
Does anyone know why my music wont play on my 7th generation iPod nano? I've tried resetting it already but that didnt work. Can someone please help.
I would to a Restore. Select the iPod in iTunes. Go to the Summary tab for the iPod. There is a button there to do a Restore. This will erase the iPod, re-install its software, and set it to default settings. After Restore complete, try playing songs on the iPod again.
If THAT does not fix the problem, and it's not bad headphones (since you also tried the "speaker"), there is probably a hardware problem on the iPod. All 7th gen nanos are still under warranty. If you have an Apple Store nearby, you should take it to the store's Genius Bar. To minimize waiting, you can make a reservation on store's web page.
http://www.apple.com/retail/ -
I am trying to sync an audiobook from iTunes to a 7th Generation iPod Nano. The manual says audiobooks can be synced to this device by going to iTunes, selecting the Book button and selecting sync audiobooks but when I select the Book button I do not see any syncing options to select. What am I doing wrong?
Error 1611: This error may indicate a hardware issue with your device. Follow the steps in this article. Alsoattempt to restore while connected with a known-good 30-pin Dock Connector cable, computer, and network to isolate this issue to the device. The MAC address being missing or the IMEI being the default value (00 499901 064000 0) can also confirm a hardware issue. Out-of-date or incorrectly configured proxy or security software, such as FoxyProxy, can cause error 1611. To troubleshoot third-party security software, follow these steps.
Above from:
http://support.apple.com/kb/TS3694#error1611
Note it could be a hardware problem -
7th generation ipod nano only displaying white screen with blue horizontal lines
Hi,
My 7th generation ipod nano is now only displaying a white screen with blue horizontal lines along the bottom. It still plays music and is recognised in itunes with I connect it to my PC.
I have reset is and restored it and it is charged.
Please advise.
Thanks,
JessHi jkjuarez2012,
Thank you for visiting Apple Support Communities.
It sounds like your iPod nano is only showing the Apple logo with a white background, and you've tried many good steps including resetting and restoring the device. I know I'd miss my music in this situation.
Make sure that you followed the steps in this article when restoring your iPod:
Restoring iPod to factory settings - Apple Support
If the issue continues after restoring, your iPod nano may need to be serviced. You can use this link to find out more about iPod service:
If the issue is still not resolved, please read this information on servicing your iPod.
From:
iPod nano (7th generation): Hardware troubleshooting - Apple Support
Best Regards,
Jeremy -
I have a 7th Generation iPod Nano that started flashing the Apple logo with a white background. I have tried Diagnostics, restoring the iPod and even resetting it. At one point it was in a Restore Loop. I'm thinking maybe it has a virus but reading further says that I may be missing one of the drivers. Is there any way to fix it without taking into a tech?? Please help...miss my music!!
Hi jkjuarez2012,
Thank you for visiting Apple Support Communities.
It sounds like your iPod nano is only showing the Apple logo with a white background, and you've tried many good steps including resetting and restoring the device. I know I'd miss my music in this situation.
Make sure that you followed the steps in this article when restoring your iPod:
Restoring iPod to factory settings - Apple Support
If the issue continues after restoring, your iPod nano may need to be serviced. You can use this link to find out more about iPod service:
If the issue is still not resolved, please read this information on servicing your iPod.
From:
iPod nano (7th generation): Hardware troubleshooting - Apple Support
Best Regards,
Jeremy -
I have a 5th generation IPod Nano that I have registered to my ITunes account. I recently bought my daughter a 7th generation IPod Nano and have attempted to sync this new IPod to my ITunes account. A message continues to appear saying that it does not recognize the (new) device... Any suggestions ??
How to use your iPod to move your music to a new computer
-
Does the dock from a fourth generation ipod shuffle work with a second generation ipod shuffle?
No, they are different. If you look at the replacement part for the 4th gen shuffle's USB cable
http://store.apple.com/us/product/MC003ZM/A
it says it's only for the 3rd and 4th gen shuffle.
Maybe you are looking for
-
HR_MAINTAIN_MASTERDATA - Missing Action Reason (MASSG)
Hi Developers, I have a bit of an issue. I'm trying to create a new employee using FM HR_MAINTAIN_MASTERDATA. Unfortunately, when I call the FM and enter the below listed imports, I receive the following error IMPORTS: PERNR ==>
-
My imac starts up but I can't see the internal hard drive
The hard drice appears to have disappeared from the desktop
-
Select words at one in Pages 5.2.2
Hi ! I can't select words from different paragraphs at one in Pages 5.2.2 I usually did it on the other version of Pages. Can somebody help me ? Thank you
-
PDF Printing in BEx Web Applications
Hello all. I am having a problem printing to PDF. I have a web template with 6 different tables on it. A dashboard so to speak. When I try to print to PDF, it prints the tables into the PDF one on top of the other rather than maintiang the look an
-
Multipoint 2012 upgrade to r2?
Has anyone heard if there is an upgrade path for Multipoint 2012 to get the Server 2012 r2 enhancements?