Does Anybody know the Errorcode 196619 in relation to standard 2 port NI CAN Controller, LabVIEW 6i and WIN NT 4 - SrvPck 6.

Frequently the WIN NT 4 System hangs up when I start a LabVIEW Can Application. ( i.e. the NI CAN Examples.)
If I'm able to start the application it works propperly. I'm using the two ports of the PXI CAN Controller to test the communikation. ( CAN0, CAN1 )

Be sure that the card is plugged in tight. Do any other PXI cards work in the chassis? If not, there may be something wrong with the PXI hardware.
Also, be sure to install the latest CAN drivers from ni.com.
Randy Solomonson
Applications Engineer
National Instruments

Similar Messages

Does anybody know the error code 11 while updating to ios 4.3.3.? thx

does anybody know the error code 11 while updating to ios 4.3.3. on an ipad1? thx

but my hard drive is still lot of spaces...still keep on trying to update...

Does anybody know the exact date when iOS 6 will be released?

Does anybody know the exact date when iOS 6 will be released? I know it will be coming out in the Fall, but I was wondering if anybody knew the exact date.

no one but apple knows for sure, and I'm willing to bet at this point in time all they have is a target date (if the software package was done it'd be released)
Bear in mind also, the first 48-72 hours after the software's release it's often quite challenging to get the update or it takes a lot of time because you're one of millions that are trying to get on the servers. So release date and available/accessible date can be separated by a bit.

My final cut studio keeps giving me this error out of memory message when ever i try to render a piece of footage and its closing unexpected. Does anybody know the reason?

My final cut studio keeps giving me this error out of memory message when ever i try to render a piece of footage and its closing unexpected. Does anybody know the reason?

I had this problem about 2 months ago and, as others have suggested in this thread, eventually traed it backed to some stills I had scanned and brought into the project. Accidentally I had changed the scanner settings, with the result that a couple of skills were well beyond 1980 x 1020 pixels. I resampled the stills and everything was fine again. Hope this might help.

Does anybody know the app cleaner

does anybody know the app cleaner???
is it good?? my macbook is getting very slow

I doubt that AppCleaner is going to speed up your Mac - unless you're short on hard drive space. Some companies have uninstall instructions or even apps on their websites for uninstalling their software. Use these instructions/apps if at all possible.
I've used AppCleaner a couple of times just to get rid of as much auxiliary junk as I can... but my use of it is limited only to those apps which I know haven't made any system modifications.
Be warned - without instructions/apps for uninstalling is the best method of uninstalling applications. Use AppCleaner only as a last resort.
See thomas_r's -> How to uninstall software.
Good luck,
Clinton

Does anybody know the terminal instruction to remove the shadow from screen grab images

Does anybody know the terminal instruction to remove the shadow from screen grab images?
I saw it somewhere on some site ages ago
(I like to align images together and take another screen grab without the darn shadow and without opening another app)

I found this:
defaults write com.apple.screencapture disable-shadow -bool true && killall SystemUIServer
but this soesn't seem to work
and this
To get rid of the shadow and only capture the window, enter this line of code in Terminal:
defaults write com.apple.screencapture disable-shadow -bool true
Then to implement the change, enter:
killall SystemUIServer
To revert the modification and restore shadows, enter:
defaults write com.apple.screencapture disable-shadow -bool false
doesn't work either in Mountain Lion

Macbook Air failed wifi connection - Does anybody know the solution?

Macbook Air has been connecting to Wi-Fi network without issue for almost 2 years.
Haven't been able to find a solution to 'failed Wi-Fi connection' so far.
Wi-Fi is turned on but is not connected to a network.
Wi-Fi Settings Failed.
Have tried trashing:
Library/Preferences/SystemConfiguration/com.apple.network.eapolclient.configurat ion.plist
Library/Preferences/SystemConfiguration/com.apple.network.identification.plist
Networkintefaces.plist
And restart, but no change.
Mac OS X Version 10.7.5
1.6GHz Intel Core i5
Does anybody know the solution?

Had restarted the router a few times to no avail.
Checked out the vendor's website, but wasn't able to find anything of use, -it was limited options wise.
Nothing in the OS X recommendations for Wi-Fi settings jumped out me.
I wasn't able to experiment with the band/channel settings.
I ended up buying a USB/Ethernet adaptor so I could at least have access to the net (5 days ago), -which didn't change the Wi-Fi issue...
However, after a couple of days without use, I've woken the machine and noticed the Wi-Fi signal at full strength. The network is detected and connected!
Problem solved ...But how?

Does anybody know the itunes startup switches / command lines?

I have 2 itunes librarys and dont like having to hold Shift when I open itunes every time to switch itunes librarys.
I want to create 2 shortcuts to itunes on my desktop, each containing a switch / command line to open the desired library
Does anybody know what the switches / command lines are to startup itunes?

As far as I know, the only arguments iTunes.exe supports is a path to a file to start playing (music or video). You can't tell it via command-line switches to open a certain library.
I do however have a helper program that will do what you want. You give it the path to your library folder as an argument, so you have to create shortcuts to my exe, with the library folder as the argument.
For example, if the path to one of your iTunes Library is C:\library (i.e. inside C:\library is the file "iTunes Library.itl", the "iTunes Music" folder, etc.), then the shortcut target would be:<pre>C:\itunesopenlibrary.exe -b C:\library</pre>
The program works by editing the iTunes Prefs.xml directly, then starting iTunes. The -b switch is to make a backup of the prefs file before editing it. Note, however, that it only makes one backup; the next time you run itunesopenlibrary.exe with "-b", it will overwrite the last backup.
Download the program here:
http://mysite.verizon.net/teridon/itunesscripts/index.html#itunesopenlibrary
The forum TOS requires me to say: "I may receive some form of compensation, financial or otherwise, from my recommendation or link" because I have a paypal donation link on my webpage, but the program is free (donation totally optional)
HTH,
Rob

Does anybody know the difference between extractors 0FI_GL_4 and 0FI_GL_10?

BW experts: I have to extract GL data into BW, and I was assuming I would use 0FI_GL_4 datasource. However, I began looking around and see now 0FI_GL_10. I am not knowledgable on the finance side at all in SAP, so I don't know which extractor makes sense to use. Does anybody know what the difference is between these two extractors.
Kind Regards,
Chris

these two datasources are different from each other.
If you are still using the old GL - you need to use 0FI_GL_4
If you are still using the NEW GL - you need to use 0FI_GL_10
And one more thing to keep in mind id 4 extractor is meant for line items and 10 is for totals. And there is no std line item DS for NEW GL. You need to create ur own.

I've fried my USB ports... does anybody know the model # for my motherboard

My usb ports are fried on my G5 and the apple suggested that I should add an internal usb card, which I did. However, sometimes it won't recognize my ipod and won't charge my ipod.
I'd like to exchange the whole motherboard and I've seen some on ebay but I am not sure abou the part number. Any ideas how I figure that out?

You can click on the specifications link near the top of the page and find the model number of your machine. Then, you can go to WeLoveMacs.com and see the available service parts (and their part numbers), by model number.
Be prepared for some sticker shock on a logic board.
I agree with hatter, though. Probably easier to find a better USB card.

Does anyone know the best way to create a form that you can do a mail merge with?

I have been asked to create a form that can be used to do a mail merge. At first I thought I could create it in indesign and then pdf the file and do form fields right in the pdf, but I'm not sure if you can do a mail merge with data in an excel file and a pdf file containing form fields.
The other option I know I could use is a Word file and excel, but I don't think the functionality is as good as in a pdf (like addition of percentages, or error messages, radio buttons, etc.). And I do need to be able to do a mail merge. Anybody have any suggestions?

There is not built-in feature for this, but it can be done with scripting. The problem is it can be a bit complicated, and it more complicated to decribe in much detail in a forum posting. It involves creating the base form and making the pages templates. You can export from Excel to a tab delimited text file. You can then either programmatically create a template-based FDF that when loaded into Acrobat populates the PDF form, creating as many individual forms as needed, or using JavaScript in Acrobat to read the data file and generate as many individual forms as needed. Both approaches involve a similar amount of programming, but they're quite different.
You might want to look into this product, which apparently is no longer available but may be come back soon: http://www.debenu.com/products/eol/arts-pdf-variform-lite/

Does anybody know how to pass images from DVT framework 2.6.1 to LabVIEW 7.0?

I have a DVT camera running inspections and a Laptop running Framework 2.6.1, I have the ActiveX Controls version 1.2.2 and I can communicate with Visual Basic 6.0 but not with LabVIEW 7.0. I am using an Automation Refnum pointing to the DVT SID and invoking the methods to connect, display images and disconnect, but out of the Automation Refnum, I am getting a 0 value which is genarating an error 97 in LabVIEW. The question is, Does somebody knows how to do it right?, or if there are known issues that will not allow it?
Thanks in advance ...

Violante,
I did some basic research into this and you can view the results i obtained
here:
http://www.lavausergroup.org/phpBB2/viewtopic.php?t=74
hopefully this will help
Regis
"violante" wrote in message
news:50650000000800000056AD0000-1066448259000@exchange.ni.com...
> I have a DVT camera running inspections and a Laptop running Framework
> 2.6.1, I have the ActiveX Controls version 1.2.2 and I can communicate
> with Visual Basic 6.0 but not with LabVIEW 7.0. I am using an
> Automation Refnum pointing to the DVT SID and invoking the methods to
> connect, display images and disconnect, but out of the Automation
> Refnum, I am getting a 0 value which is genarating an error 97 in
> LabVIEW. The question is, Does somebody knows how to do it ri
ght?, or
> if there are known issues that will not allow it?
> Thanks in advance ...

Does anyone know the serial number for acrobat xI standard on a dell

does anyone know what the serial number is for acrobat xI standard on a dell

Hi Krisina ,
You could seek help referring to the following link and find your serial number easily.
https://helpx.adobe.com/x-productkb/global/find-serial-number.html
Regards
Sukrit Dhingra

Currency Conversion Rule Does Anybody know the answer to this?

Hello All-
I am trying to understand a script for currency converison planning application. I am 9.3.1 and its is a out of box application. I was going through the following script :
1st part of script is simple
FIX("Actual","FY10",jan,feb,mar,apr,may,june,july,aug,sept,oct,nov,dec,"HSP_InputValue","Final",@LEVMBRS("Accounts",0),@LEVMBRS("Entities",0),))
DATACOPY "Local" TO "USD";
DATACOPY "Local" TO "GBP";
ENDFIX ;
2nd part of script :
ELSEIF (@ISUDA("Entities","GBP") AND @ISMBR("USD"))
"Local" * "Version"->"Currency"->"Entities"->"HSP_Rate_GBP" / "Version"->"Currency"->"Entities"->"HSP_Rate_USD";
ELSEIF (@ISUDA("Entities","USD") AND @ISMBR("GBP"))
"Local" * "Version"->"Currency"->"Entities"->"HSP_Rate_USD" / "Version"->"Currency"->"Entities"->"HSP_Rate_GBP";
I am concerned about the second part where in for all the entities that has UDA GBP converts the values in USD & vice versa.
I went to the table in plnning web where we store the FX rates. At the top i can see a drop down for "To currency" which is USD, and in planning terms my guess is this is the base currency for the application? Then in row i see GBP and
in method it says "Multiply" and going forward it has all the avg and end rates stored for the Time periods. I want to know what this "Multiply" means? i retreived the rates on spreadsheet and found HSP_Rate_USD ==1. So above in the
second part of the script for USD entities and memeber GBP it divides USD rate by GBP Rate (1/ GBP rate) and i am not sure what rate we get by doing this division. I was assuming that it would take the local amonut and divide directly
with "HSP_Rate_GBP" ? For rest of the currencies as well its doing the same math. The 1 for "HSP_Rate_USD" is this a default value stored when application is created ?
Please advise!
Thanks!
Edited by: user4958421 on Mar 12, 2010 7:10 AM

Seems to be OK - assumptions:
- USD is your base currency ("Version"->"Currency"->"Entities"->"HSP_Rate_USD" = 1)
- exchange rates are defined as so that when you multiply them with the USD value, you receive the value in the given currency
Let's simplify the formula:
"ELSEIF (@ISUDA("Entities","GBP") AND @ISMBR("USD")) " means
If the local curreny is GBP and my reporting currency is USD
Then USD = value in "Local" currency" * exchange rate GBP
Calculation steps:
(1)
- Local" * "Version"->"Currency"->"Entities"->"HSP_Rate_GBP" / "Version"->"Currency"->"Entities"->"HSP_Rate_USD";
- and ("Version"->"Currency"->"Entities"->"HSP_Rate_USD" = 1
(2)
- Local" * "Version"->"Currency"->"Entities"->"HSP_Rate_GBP" / 1;
(3)
- Local" * "Version"->"Currency"->"Entities"->"HSP_Rate_GBP" ;
Simple or not?

Does anybody know the color gamut of the late 2013 27" iMac?

Hi!
I'm going to buy a new iMac and I would like to know how it performs against the industry standard Eizo or Nec (photography).
Does it cover sRGB? How about AdobeRGB?
Thanks everybody!

2560 x 1440

Does Anybody know the Errorcode 196619 in relation to standard 2 port NI CAN Controller, LabVIEW 6i and WIN NT 4 - SrvPck 6.

Similar Messages

Maybe you are looking for