Does anyone could help with autoviewer-pro 1.3

Does anyone could help with autoviewer-pro 1.3! Thing is that I want to use png images without background in autoviewer, I've tried everything all kinds of picture formats, alphas, gone through google, autoviewer forum.... but no answer how to do it. When I attach a picture in autoviewer galleryit...after it is still with white background in autoviewer flash!
Can enyone helpe with avice.
Thanks in advance!

This post is from another topic but has to do with iPhone 4s unlock.
ArnettH_VZW
replied 11 hours ago
Good morning frank-bao,
In order for us to assist with unlocking your iPhone, there are some requirements that needs to be met. Please see below to verify that they are applicable to your situation.
Must be a Verizon Wireless customer. Verizon Wireless only unlock devices for Verizon Wireless customers.
The device being unlocked must be active on a Verizon Wireless line of service.
The line of service must be active at least 60 days.
The line of service must be in good standing for the past 60 days.
Customer may only have one 3G SIM Unlock per line every 10 months.
The customer's manufacturer's device warranty is not affected by a 3G SIM unlock as long as the customer remains with Verizon Wireless.
If you meet all of these requirement then we can certainly unlock your iPhone for you, assuming that it's not unlocked already. To get this process started or to inquire on if your device is unlock then please reach out to our Global support team at 800-711-8300. If you are already or still out of the country then we can be reached at 908-599-4899. Let me know if there is anything else that I can do to help.
Thank you...
ArnettH_VZW
Follow us on Twitter @vzwsupport

Similar Messages

  • Help with autoviewer-pro 1.3!

    Does anyone could help with autoviewer-pro 1.3! Thing is that I want to use png images without background in autoviewer, I've tried everything all kinds of picture formats, alphas, gone through google, autoviewer forum.... but no answer how to do it. When I attach a picture in autoviewer galleryit...after it is still with white background in autoviewer flash!
    Can enyone helpe with avice.
    Thanks in advance!

    bpang,
    Kindly tell me how you solved your problem
    BB

  • Does anyone could help to unlock my 4S?

    Got a gift verizon 4s but couldn't use on Taiwan carrier.  >>Edited to comply with community TOS<<
    Message was edited by: Verizon Moderator

    This post is from another topic but has to do with iPhone 4s unlock.
    ArnettH_VZW
    replied 11 hours ago
    Good morning frank-bao,
    In order for us to assist with unlocking your iPhone, there are some requirements that needs to be met. Please see below to verify that they are applicable to your situation.
    Must be a Verizon Wireless customer. Verizon Wireless only unlock devices for Verizon Wireless customers.
    The device being unlocked must be active on a Verizon Wireless line of service.
    The line of service must be active at least 60 days.
    The line of service must be in good standing for the past 60 days.
    Customer may only have one 3G SIM Unlock per line every 10 months.
    The customer's manufacturer's device warranty is not affected by a 3G SIM unlock as long as the customer remains with Verizon Wireless.
    If you meet all of these requirement then we can certainly unlock your iPhone for you, assuming that it's not unlocked already. To get this process started or to inquire on if your device is unlock then please reach out to our Global support team at 800-711-8300. If you are already or still out of the country then we can be reached at 908-599-4899. Let me know if there is anything else that I can do to help.
    Thank you...
    ArnettH_VZW
    Follow us on Twitter @vzwsupport

  • I have both a MacBook Pro and macair but the pro won't let me in I think it something to do with hard disc or permissions as it says system profiler in utilities , if anyone could help I'd be very grateful

    I have both a MacBook Pro and macair but the pro won't let me in I think it something to do with hard disc or permissions as it says system profiler in utilities , if anyone could help I'd be very grateful

    Restart the MBP and immediately hold the option key down. Release the key when you see the Apple logo. The computer will boot and show you a screen with two hard drive icons.
    Select Recovery and hit Return.
    On the new screen, select Disk Utility and hit Return.
    In DU do this:
    In the list at the left, select the name of your hard drive. (Be sure to select the name that’s indented to the right in the list, not an item at the far left.)
    Click First Aid.
    If Disk Utility tells you the disk is about to fail, back it up and replace it. You can’t repair it.
    Click Repair Disk.
    When that is done, click Repair Permissions. Be patient!
    When that is done, quit DU and restart in the usual way.

  • PLEASE, ANYONE COULD HELP ME WITH THIS !!!

    PLEASE, ANYONE COULD HELP ME WITH THIS !!!

    hi, i was facing this problem from past few days...solution... WE JUST HAVE TO USE A USB 2.0 HUB... this solved my problem....E1713 is not able to connect to usb 3.0 as it does with 2.0.

  • I'm trying to download vm Fusion 5 so I can run Windows 7 on my new iMac. But I am very inexperienced with computers and was wondering if anyone could help walk me through the process.

    I'm trying to download vm Fusion 5 so I can run Windows 7 on my new iMac. But I am very inexperienced with computers and was wondering if anyone could help walk me through the process.

    post in the vmware forum or call vmware customer support.

  • Anyone could help me with this report. ?

    Hi to all, anyone could help me with this report ?
    I have this one:
    SELECT 'Factura',T0.ItemCode, T0.Dscription, SUM(Quantity) as Cantidad, Sum(LineTotal)  as Total
    FROM INV1 T0 INNER JOIN OINV T1 ON T0.DocEntry = T1.DocEntry
    INNER JOIN OCRD T2 ON T1.CardCode = T2.CardCode
    INNER JOIN OSLP T3 ON T1.SlpCode = T3.SlpCode
    WHERE ((T1.CardCode >= '[%1]' AND  T1.CardCode <= '[%2]'))
    AND T1.DocDueDate >= '[%4]' AND T1.DocDueDate <= '[%5]'
    AND T3.SlpName >= '[%6]' AND T3.SlpName <= '[%7]'
    GROUP BY T0.ItemCode, T0.Dscription
    UNION
    SELECT 'Abono',T0.ItemCode, T0.Dscription, SUM(Quantity * -1 ) as Cantidad, Sum(LineTotal * - 1) as Total
    FROM RIN1 T0 INNER JOIN ORiN T1 ON T0.DocEntry = T1.DocEntry
    INNER JOIN OCRD T2 ON T1.CardCode = T2.CardCode
    INNER JOIN OSLP T3 ON T1.SlpCode = T3.SlpCode
    WHERE ((T1.CardCode >= '[%1]' AND  T1.CardCode <= '[%2]') )
    AND T1.DocDueDate >= '[%4]' AND T1.DocDueDate <= '[%5]'
    AND T3.SlpName >= '[%6]' AND T3.SlpName <= '[%7]'
    GROUP BY T0.ItemCode, T0.Dscription
    But now I want to introduce this sentence in:
    Select I.ItemCode,I.ItemName,
    (select price from ITM1 where ItemCode=I.ItemCode and PriceList=1),
    (select price from ITM1 where ItemCode=I.ItemCode and PriceList=2),
    (select price from ITM1 where ItemCode=I.ItemCode and PriceList=3),
    (select price from ITM1 where ItemCode=I.ItemCode and PriceList=4)
    From OITM I
    Could you help me ?
    Many thanks.

    Please try this one:
    SELECT 'Factura',T0.ItemCode, T0.Dscription, SUM(Quantity) as Cantidad, Sum(LineTotal) as Total,
    (select price from ITM1 where ItemCode=T0.ItemCode and PriceList=1) 'Price List 1',
    (select price from ITM1 where ItemCode=T0.ItemCode and PriceList=2) 'Price List 2',
    (select price from ITM1 where ItemCode=T0.ItemCode and PriceList=3) 'Price List 3',
    (select price from ITM1 where ItemCode=T0.ItemCode and PriceList=4) 'Price List 4'
    FROM INV1 T0 INNER JOIN OINV T1 ON T0.DocEntry = T1.DocEntry
    INNER JOIN OCRD T2 ON T1.CardCode = T2.CardCode
    INNER JOIN OSLP T3 ON T1.SlpCode = T3.SlpCode
    WHERE ((T1.CardCode >= '[%1]' AND T1.CardCode <= '[%2]'))
    AND T1.DocDueDate >= '[%4]' AND T1.DocDueDate <= '[%5]'
    AND T3.SlpName >= '[%6]' AND T3.SlpName <= '[%7]'
    GROUP BY T0.ItemCode, T0.Dscription
    UNION
    SELECT 'Abono',T0.ItemCode, T0.Dscription, SUM(Quantity * -1 ) as Cantidad, Sum(LineTotal * - 1) as Total,
    (select price from ITM1 where ItemCode=T0.ItemCode and PriceList=1) 'Price List 1',
    (select price from ITM1 where ItemCode=T0.ItemCode and PriceList=2) 'Price List 2',
    (select price from ITM1 where ItemCode=T0.ItemCode and PriceList=3) 'Price List 3',
    (select price from ITM1 where ItemCode=T0.ItemCode and PriceList=4) 'Price List 4'
    FROM RIN1 T0 INNER JOIN ORiN T1 ON T0.DocEntry = T1.DocEntry
    INNER JOIN OCRD T2 ON T1.CardCode = T2.CardCode
    INNER JOIN OSLP T3 ON T1.SlpCode = T3.SlpCode
    WHERE ((T1.CardCode >= '[%1]' AND T1.CardCode <= '[%2]') )
    AND T1.DocDueDate >= '[%4]' AND T1.DocDueDate <= '[%5]'
    AND T3.SlpName >= '[%6]' AND T3.SlpName <= '[%7]'
    GROUP BY T0.ItemCode, T0.Dscription
    Thanks,
    Gordon

  • Does anyone can help me with Typical issues to deal with when rolling out ERP in Japan?

    Does anyone can help me with Typical issues to deal with when rolling out ERP in Japan?

    If it were me I would schedule an appointment at the store where you bought it and meet with the Manager of the store in person. Print this post and bring it with you along with your iMac.
    And change the password on your Apple ID and then see if there are in purchases in your account that you did not make. If there are then someone did get your ID and password. If not someone got your Credit Card information from somewhere and used it.

  • If anyone could help me I would be HUGELY appreciative - Uni deadline today and need help!

    Hi
    I'm reasonably new to indesign but know the basics.  I have a deadline today but my InDesign CS6 is behaving strangely - If anyone could help me I would be HUGELY appreciative. 
    I'm trying to type like I normally would but whenever I try to place a piece of punctuation at the end of a paragraph or line, it places it at the start of the line.. even if my cursor is telling it to do differently.  (see image)
    I'm trying to place it at the end of legibility where my cursor is but it places it at the start of clarity at the start of the line!? does anyone have any ideas, need help with this ASAP
    Thanks a lot!
    Joe

    @Joel – do you work with the Adobe World-Ready-Composer in conjunction with a RTL (Right-To-Left) character format? Maybe you could show us your paragraph with "Hidden Characters"on. Together with your definitions of the character style for the dot, the character style for all other characters and the paragraph style.
    I could mimic something like  you are showing with a very strange set of scripts generating a paragraph style and two character styles in InDesign CS5.5.
    See the following screen grabs:
    Character Style named "ZF_LTR" for all characters in the paragraph but the last one (the dot):
    Character Style named "ZF_Arabic" for the last character in the paragraph:
    Paragraph Style named "AF_MIXED2_LTR-RTL" for the whole paragraph. Not formatted properly for Arabic use. See the details in the section "Formateinstellungen" in the screen grab:
    That would be an explanation…
    Might be, that there is another one.
    Uwe

  • When iWorks for iCloud Beta become available I subscribed to it. After that I become unable to access iCloud at all as in all my devices I get messages to install it and other apps (find my phone, etc) that are already active. Anyone could help?

    When iWorks for iCloud Beta become available I subscribed to it. After that I become unable to access iCloud at all as in all my devices I get messages to install it and other apps (find my phone, etc) that are already active. Anyone could help?

    The first time an iPhone is connected to iTunes that is used to sync with another iPhone or iOS device, you are prompted to transfer the backup for the other iPhone or iOS device or to set up the iPhone as a new iPhone.
    The former does as provided - it transfers the backup for the other iPhone or iOS device to the iPhone replacing all data on the iPhone that is included with the backup being transferred. The latter does nothing allowing you to make your various selections for the iPhone sync preferences with iTunes.
    This is designed to be done right away with a new iPhone.
    If you don't have a backup for the iPhone with iTunes on your computer and don't have an iCloud backup that hasn't been updated since choosing to transfer the backup for your iPod Touch to the iPhone, the data that was on the iPhone is gone.

  • Does someone may help with following problem:

    Does someone may help with following problem:
    In my family we have we have 3 dock stations audio devices: Bose Sound Dock series II, Philips DS3020/12, Sharp DK-AP7N(R).
    We have also 2 Iphones 4s and one ipod classic.
    The latest iphone 4s does not work with the Bose and Philips audio systems: the iPhone 4s is charging, but music is playing in the iPhone speakers and not in the dock speakers, on the iPhone there is a message. In Italian the message is "Il dispositivo non supporta questo accessorio" that almost means that the iPhone does not support the device. Please note that the iPhone works with the Sharp DK-AP7N(R) audio system.
    The other iPhone 4s works with all 3 devices since long time.
    Both the iPhones have iOS 7.1.1, so it should be not related to software version.
    The ipod classic works with all 3 devices.
    Does anyone know how to fix

    I know that Bose products work with iPhones they sell  Bose at Apple store online I also have Bose no problem
    On Blue Tooth on IPhone press forget this device and any others on list then try to pair iPhone again
    Make sure Blue Tooth is enabled on iPhone and do not run any other Apps at the same time.
    Bsydd Uk

  • Need help with premiere pro cs6 having performance issues please help

    need help with premiere pro cs6 having performance issues please help

    Welcome to the forum.
    First thing that I would do would be to look at this Adobe KB Article to see if it helps.
    Next, I would try the tips in this ARTICLE.
    If that does not help, a Repair Install would definitely be in order.
    Good luck,
    Hunt

  • Does anyone have experience with migrating applications from iAS6.0 SP2 to SP3? Did it go smoothly or are there problems to be expected?

     

    Hi,
    I haven't. But, there are lots of changes from each service packs,
    henceforth you may have to stick to what the documentation says to avoid
    the errors that shoots up. Again, the errors depends upon how you have
    coded your application. Please let me know if you have encountered any
    errors and the messages for me to help you.
    Regards
    Raj
    Peter Clijsters wrote:
    Does anyone have experience with migrating applications from iAS6.0
    SP2 to SP3? Did it go smoothly or are there problems to be expected?
    Try our New Web Based Forum at http://softwareforum.sun.com
    Includes Access to our Product Knowledge Base!

  • Does anyone know when the Mac Pro switched from ATA to SATA DVD Drives

    Does anyone know when the Mac Pro switched from ATA to SATA DVD Drives ?
    I tried to find this answer online but failed.

    Appears the Mac Pro (Early 2008) is the last model to suggest Ultra ATA/100 optical.
    And with an optional card, use Serial Attached SCSI via Mac Pro Raid.
    This kind of information gets sketchy in that the hard drive bus and other parts are SATA
    and only this (and earlier) model Mac Pro has optical drive interface w/ Ultra ATA/100. The
    logic board on the early 2008 appears to have two Serial ATA ports, 3.0GBPS; so to check
    these, you may need to look into specification in iFixit.com repair guides, any takeapart
    guides, and note specifications in everymac.com and those from mactracker.ca.
    The MacPro after Early 2008 model build series (Early 2009) appears to sport an optical
    drive with 18x speed, compared to Early 2008 & before, whose drives indicate 16x spec.
    Other changes may be indicated by certain parts and differences; processors, graphic
    support, and those kinds of things. 2008 shows dual-core, afterward, quad-core.
    So on what little I found, that would appear to be the divide or when optical drive spec
    on the logic board changed from Ultra ATA/100 to SATA versions. But double check.
    Good luck & happy computing!

  • Hi, I cannot be heard when iam on the phone? Does anyone can help me?

    Hi, I cannot be heard when iam on the phone? Does anyone can help me?

    Thank you for the feedback.  I still cannot locate the actual Audio file to listen to the book though.  I can look on my iPhone and see that it says the book is downloaded but I cannot find it anywhere on the actual phone.  I can listen to the Audiobook from my computer, but can't see it anywhere on my iPhone, which is where I really need it.  When I plug in my old iPhone 4, it is still listed and I can listen to it. 
    It is not listed under Music, TV Shows, Movies, Audiobooks, Tones, Purchased or Downloads. 
    Screenshot from new iPhone 5. It says the Audiobook is downloaded.
    Screenshot from old iPhone 4: (This is how I used to listed to my Audiobook before I upgraded to iPhone 5)
    Once I clicked on "Purchased" on the iPhone 4...my Audio files are listed and I could click on them and play. 
    (iPhone 4 screenshot)
    Now when I try to go to the same screen on my new iPhone 5, the Purchased button doesn't exist on my Downloads screen and I can't seem to locate the actual Audio Files anywhere, although the phone says they are downloaded and the iTunes App on my PC states that they synched to the phone.  Any help would be greatly appreciated. 
    New iPhone 5 screenshot of same  screen but without the "purchased" button.

Maybe you are looking for