Does anyone else have a problem with their charger getting extremely hot?

When I charge my macbook pro, the charger gets soooo hot- Should I get a new one or does apple repair them? It is so hot I can't touch it sometimes.

I would take it to an Apple Retail Store or an Apple Authorized Service Provider  (AASP) for evaluation, or call your nearest Apple Contact Center. Visit the Genius Bar at the Apple Retail Store,  make a reservation.

Similar Messages

  • Does anyone else have a problem with their text tone 'glitching' after updating to iOS 5?

    Since updating to iOS 5, my text tone 'glitches' whenever i recieve a message. By glictching, I mean that it sounds doubled or sometimes it plays, stops then plays again very quickly. I've tried resetting the phone, this works for a few messages then starts again :/ Any suggestions on how to fix this would be much appreciated.
    Many thanks

    It would be nice to get this issue fix.  I didn't notice it until today.  The text tone is very sporatic, or delayed, alerts me twice, and it's just not what it used to be like.  C'mon Apple - fix the glitches, please.

  • HT1338 There's not enough contrast in my 2012 MacBook Air display. Does anyone else have a problem with this? Can I fix it?

    When I watch streaming shows or movies on my Air the contrast is lousy. If it's a dark scene you can hardly see anything. Does anyone else have this issue? I've got it as bright as it lets me go.

    It seems that my pioneer DVD drive ate my disc and no matter what I do, I can't get it out.
    What have you done so far?  Provide details on what you have done to date in the way of troubleshooting and the results.  In doing so, the helpers here will avoid the "been there done that" response scenerio. 
    Have you tried any of the suggestions mentioned in this thread:  The Stuck CD/DVD Thread
    how hard is it to take the iMac apart?
    If your model iMac is not user repairable, do a Google search for DIY instructions.  Two places to start is iFixit and YouTube's tutorials.
    What is a good replacement for it?
    External CD/DVD burners.  Check out OWC & Lacie websites for CD/DVD drives.  Make sure you read the system requirements for the drives.
    Good luck!

  • Anyone else have a problem with the charging plug catching on the aluminum backplate?

    Relatively new Ipad - after charging the unit, disconnected the charging plug and it caught on the backplate.  Anyone else have this problem?

    This problem arose today.  When I removed the plug, the plug pulled on the Ipad2, specifically the thin aluminum strip between the plug's receptical and the Ipad2's front.  No functional damage...the unit still works and charges, but now that thin aluminum strip is displaced.  The plug itself appears to be the culprit.  Looking at the plug that connects to the Ipad2 (the side with the graphic), there are 2 areas which I presume provides tension when the plug is inserted into the unit.  One of those areas is displaced, and became caught with the thin aluminum strip during the plug's removal.  

  • Does anyone else have this problem with the new up...

    in order for me to dial or use the keypad, i have to press the end key before dialing any numbers and then to remove the numbers and the dialing bar, i have to clear all the numbers manually by press the C button then i can press the end key to take off the dialing bar. another problem i have is that when i put my profile on silent, the phone doesn't vibrate the screen and lights only flash like they normally do. has anyone else had this problem? im guessing there are more flaws with the new update but im still looking into it.

    someone help meee!!!

  • Does anyone else have this problem with the iTunes visualizer?

    I rarely use the iTunes visualizer but, when I do, it gives me the option of either using the newer one or the classic one. I like to use the new one but the problem is that I can only go to "visualizer options" if I am using the classic one. In said options I could set it so that the song info (song title, artist, album title and artwork) stays in the bottom left corner for the entire song. The few times I use the visualizer, I do like to have it up for the whole song--I just think it looks cool, I don't know...
    Anyway, since I can't get the options for the new visualizer, the song info always fades away after the first five seconds or so of the song.
    Anyone else realize this?? And does it annoy anyone else lol?

    Well, I did a search on apple.com and found this:
    http://www.apple.com/itunes/itunes-news/2010/04/the-hidden-itunes-visualizer-con trols.html
    "The Visualizer -- graphics that swoop and pulse with the music -- has been part of iTunes' DNA from the beginning. And because its creators wanted to interact with the graphics in real time as well as watch them, Visualizer includes some single keystroke commands that change what you see while it runs. But these commands are hidden by default lest they obstruct the graphics.
    Use the Show/Hide Visualizer command in the View menu to turn Visualizer on and off, and use the Visualizer menu to select among the choices. If the choice you're using has hidden commands you can see them for a brief time by typing ? while a song is playing and Visualizer is visible. The keystrokes will work regardless of whether the help menu is showing, so if you memorize them it's possible to add Virtuoso Visualizer Player to your list of accomplishments. (For the Visualizer choice called Jelly, available only in iTunes for Mac, try holding the keys down, especially the number keys, for maximum effect.")
    Not that you care. >.<

  • Does anyone else have a problem with printers going offline?

    Macbook Pro OS X 10.6.8
    I received a Epson Artisan 730 All in One Wireless printer in Dec 2011 and spent literally hours trying to get the computer and printer to recognize each other.  After about a week of phone calls between Apple and Epson (each saying it wasn't their electronic with the problem) the issue was finally solved.
    In June 2012, the printer suddenly stopped working and once again, hours were spent on the phone with Apple and Epson techs, to no avail.  I found an article online about Reset Printing System and I was able to get it up and running again.
    August 1, 2012, the printer once again stopped working, saying it was offline.  Restarted computer & printer, checked for updates on Apple & Epson, reset printing system again and now the printer does not show when I click the "+" to add a printer.  In fact, nothing shows in the list.  I've pretty much given up for the day, but wrote a letter to Epson and am posting here.  What gives?  Does anyone know why the printer & computer stop communicating?  And why is the problem repeating itself?
    [email protected]

    PaulDouglas wrote:
    PS - Apple, are you listening? 
    No
    No one here works for Apple nor does Apple visit this message board.  We are all end users like yourself helping each other out.  Post your complaint on the Product Feedback website.

  • HT1947 Does anyone else have my problem with atv3? Plays films in iTunes without any problems but on music every time I use the remote app on my iPhone 3GS it stops playing after around 5 tracks in. Anyone having this problem?

    Does anyone share my problem with atv3 I can play films through iTunes without any problems. When I start playing music using the remote app on my iPhone 3GS after around 5 tracks in it just stops playing and seems to lose my connection. Hoping this is human error on my part?

    I think this is probably a sign that your network could be better than it is.
    Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
    You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
    Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
    There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first.

  • Pages - Does anyone else have this problem with zoom?

    Hello,
    please does someone have the same problem with page for iOS? here is a link to a picture which describes my problem : https://www.dropbox.com/s/mpecfcbgorrzjes/Photo%2029-10-2014%2019%2012%2016.png? dl=0
    Thank you very much.

    someone help meee!!!

  • HT202157 Does anyone else have a problem with the latest Apple TV update?  My Apple TV no longer can load movies from my iTunes library, including ones I've already watched or were watching.  Can I roll back this update, and if so, how?

    After updating my Apple TV, it will no longer load movies from my iTunes library.  Music works, but no movies.  I've turned this puppy every which way but loose, but no joy.  Is there a way to roll back an update?

    Greetings,
    I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
    At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
    The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
    I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
    You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
    Good Luck - Cheers,
    M.

  • Does anyone else have a problem with PIONEER DVD-RW  DVR-K06?

    It seems that my pioneer DVD drive ate my disc and no matter what I do, I can't get it out.  I only had this mac for about 6 years.  Is there any way of getting the disc out of the drive.  If not, how hard is it to take the iMac apart?  Help from anyone.  What is a good replacement for it?

    It seems that my pioneer DVD drive ate my disc and no matter what I do, I can't get it out.
    What have you done so far?  Provide details on what you have done to date in the way of troubleshooting and the results.  In doing so, the helpers here will avoid the "been there done that" response scenerio. 
    Have you tried any of the suggestions mentioned in this thread:  The Stuck CD/DVD Thread
    how hard is it to take the iMac apart?
    If your model iMac is not user repairable, do a Google search for DIY instructions.  Two places to start is iFixit and YouTube's tutorials.
    What is a good replacement for it?
    External CD/DVD burners.  Check out OWC & Lacie websites for CD/DVD drives.  Make sure you read the system requirements for the drives.
    Good luck!

  • Anyone else have a problem with their clock disappearing from their menu bar every day at 10:00 am?

    The date is still displayed, and there is a blank spot where the time should be. Unchecking/checking the "show date/time" box  in date/time preferences fixes it, but I have to take this action every day. It's more annoying than anything else, and am looking to see if there is a fix.
    This is new since I updated to Mavericks.

    reset SMC and re-verify
    SMC reset
    Shut down the computer.
    Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
    On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
    Release all the keys and the power button at the same time.
    Press the power button to turn on the computer. 
    Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.

  • Does anyone else have this problem with iCal?

    I know it is a little thing but when I open iCal, number (date) is appearing on red part of icon... it started to happen about few weeks ago...
    I've captured a screen shot of this.
    http://www.imagehigh.com/view.php?image_id=380863
    I tried to take this icon off the dock then put it back. But it still happens.

    I have the same problem. It only appeared after one of the Tiger patches (sorry, don't know which one). The little number in the upper right of the icon appeared when I added some ToDo items. The number was the day of the month when it was due (actually it was the first one due). I checked off the task when done, but the number remains. When I exit iCal, the icon reverts to the old 17 one. Starting iCal changes the icon (to have today's date) AND carefully replaces the extra number. It's a little thing, but it grows VERY old very quickly. I tried disabling the font and it made no difference.

  • Anyone else have this problem with their iPhone and MacBook?

    Okay, so just now I had my iPhone sitting on my Macbook's bottom left hand corner.  I go to slide it off to the side and it locks my MacBook!  I thought it was just a coincidence, so I tried it again with the same result.  I thought it was bluetooth, but this is off on both my phone and Mac.  Anyone know what this could be?
    Thanks

    The magnetic field of the phone is tripping the lid sensor.

  • Does anyone else have a problem with Picture Messaging?

    Everything works just fine... except when i try to send a pic msg. It starts to send but then it has a little red exclamation point by the picture and the picture fails to send.

    http://support.apple.com/kb/TS2755

Maybe you are looking for

  • I just bought an iPad and I'm unable to set up Facetime. My iMac is down so I cannot sign out of Facetime there.

    Is there any way to set it up without having to create a new appleid?

  • HT6114 Install problem

    After installing the most recent Mavericks upgrade (10.9.2) I now have a big gray question mark next to the Apple icon (@) on my dock.  When I move my mouse over the question mark it says:  CF_INTRO_6_LANGUAGE.  I don't know what this means or what t

  • Exclusion of document in the DME file

    hi to all, I have a problem in our DME file for Germany.  During payment proposal when I checked the generated DME file the amount in it does not tally with the amount in the payment proposals.  It excludes some vendor or document. Any expert there c

  • C# pass array in SAP XI Web Service

    SAP XI created a WSDL file. I add web reference in Visual Studio 2003. Calling a Read Bill_Of_Material and last parameter is "ref ZBOM[] Bill_Of_Material" I can not figure out how to create this last parameter. Looks like everything else is working.

  • Help: problem with OS/2 table

    I try programmicaly read OS/2 table. First part of table I read without problems, but with the second there are some problems. For example, I want obtain fsSelection value, and for any font this value equal 32(bold). When I obtain macStyle from HEAD