Does anyone get the mouse lag with an external display connected via the display port?
does anyone get the mouse lag with an external display connected via the display port?
You don't describe the problem in great detail. Is this the issue you are describing?
https://discussions.apple.com/thread/4398076?start=0&tstart=0
If so, then, "Yes." I have the same problem. Note that this isn't a tracking speed problem for me, it's a lag between my hand moving and the pointer moving on the external display.
Andrew
Similar Messages
-
Time machine has losing contact with my external drive, connected via a USB port.
Recently my Time Machine program has begun losing contact with my external drive, connected via a USB port. When I attempt to open Time Machine, it indicates there is no external hard drive. When I click on "setting up time machine" it opens airport utility. I've tried rebooting, run disk utility repairs for both hard discs, pulled and reconnected the USB cable, even completely shut down the system. Eventually the two re-establish contact, but I'm not certain what I've done that causes this. The lost contact appears to happen during the weekends. The external hard drive is a MJaxtor OneTouch 4. What should I be doing to solve this problem once and for all?
I use a little app named EasyFind - free at the App Store. It will allow you to search individual volumes or all volumes.
Download it and see if it will help.
Clinton -
The first day I got it, it was fine. Then when I woke up the next day which was less than 12 hours after hooking it up, it wouldn't connect..it let me type a couple of characters to my password, but then literally stopped. My trackpad has yet to have any issues whatsoever. Even during the keyboard malfunctioning it's been fine. In order to get the keyboard to work, I have to log into the guest account, let it be discovered, then pair it. It as now happened on 4 different days, more times than that, though. I've only had it for just over a week. I don't think there's a problem with the computer just because the trackpad is fine. The keyboard blinks that little green light when it's having this issue, too. As you know, it's normally off. Today I tried to log in for the first time and it did the same thing as the first day. It let me type a few characters, then stopped and wouldn't connect. This time, though, when I went into the guest account to let it be discovered it wouldn't let me type the numeric code to pair it. I had to hold down my power button to restart it because I was logged in on another user and it wouldn't let me restart it the normal way without typing the admin username/password...which I obviously couldn't do seeing as how I didn't have a keyboard. Does anyone else think this is a faulty keyboard I need to return? Or is this unfortunately how it works...or what? Help please...
I was at the Apple Store that week 5 times for a messed up phone that they replaced with a total of 4 replacement phones because of different issues the ones they gave me had and driving there that much almost made me say screw it to the iPhone...now I buy this very expensive iMac spending 2 grand and this happens....I'm so mad I am thinking of just returning it and giving up on Apple altogether which Idon't WANT to do...but with all I've dealt with in a 2 week period with the iPhone and now this...oh and I bought a $100 cell phone case I had to replace because it wasn't working correctly. So you see, I am beyond frustartee over Apple.....if anyone could help I'd greatly appreciate it. With all of my problems I've had, you'd think they want to do more than apologize for my inconvenience. Even the techs that helped me said it was ridiculous I've had so many issues and now I'm just adding to the list..Try this:
Go to System Preferences - Bluetooth. Delete the keyboard from the list of devices by pressing the "-" button. Take the batteries out of the keyboard and reinsert them. In Bluetooth Preferences press the '+" button to add the new device. If the keyboard begins to pair, click the word "pair" and type in the passcode. Press return. The keyboard is now paired.
If the mouse is not pairing, try this: shut down the computer completely, unplug any USB mice, then turn off the power to the bluetooth mouse. ONce the computer starts up again, wait for the pop-up looking for a mouse. Turn on the power to the bluetooth mouse. It should work normally now. -
TS3048 I tried the suggestion given but still the mouse and track pod can't connect to the imac
I tried the suggestion for trouble shooting still the mouse and the track pod can't connect to my imax. Also I observed that after few second both green lights died out too . The batteries are newly installed.
Unfortunately someone has since deleted the other post !!! What I suggested was No green lights = no power. And no power has to be the batteries.
Check and if necessary thoroughly clean the contact points inside the devices. Re-check the batteries (were they promotional batteries from a supermarket?). Put NEW quality batteries into the compartments (you cannot save by buying cheap batteries) and close the cover. Then shake to see if there is a rattle which may indicate the batteries are ill fitting.
From what I read here, the best batteries are Apple rechargeables and high power Duracell. I use the former. -
Does anyone get a vibration sound when talking on the iPhone6? It doesn't happen all the time and happens with talking to different people. I have tried to troubleshoot it, but can't find a answer.
Hey CEVYNBARRY!
Here is an article for you that will help you address this issue:
Troubleshooting "A connection failure has occurred", "The specified server could not be found" or similar messages
http://support.apple.com/kb/ts1843
Take care, and thanks for visiting the Apple Support Communities.
-Braden -
When opening Aperture I get Warning that says "There was an error opening the database for the library “~/Desktop/Feb 12, 2011.aplibrary.” That's it. The program does not open at all. I'm concerned that my pictures may be lost. Does anyone know how to deal with this Warning?
Might just need to rebuild the library...see this link:
Aperture 3: Troubleshooting Basics -
I get an error message when trying to sign into the support community with another Apple id. On the <pick a username> screen I get "an account utilizing this address already exists.Only one account per email address is allowed on the Apple Support Communities" despite trying a few usernames. Anyone know how I can resolve this?
This problem has been driving me demented. The instructions that Ivan gives have partially worked for me. By following his link
"How to find out if you have multiple Apple IDs" I was able to identify that yes I did have two apple accounts using the same e mail address. One was very old that I used to use for the forum boards and one is my much more recent ID that I use for everything these days. So I changed the e mail address for the old account which is associated with these discussion boards and that's the account that I am now posting this from. However even though the two accounts now have different e mail addresses when I try to log onto the boards with my more recent main apple ID I still get all the same errors as described at the start of this thread by rodgers_j. And of course that's the one I want to use so that I only have one itunes account for everything.
So if anyone has any more hints I'd be very grateful. -
I upgraded to iOS 7 to my ipad using iTunes. When signing with the Apple ID I get an error reading "There was a problem connecting to the server" anyone who knows what to do next
Sounds more like you have a problem with your apple id. For starters go to that page click manage my apple id and singn in. If you can't sign in reset password.
https://appleid.apple.com
if you can sign in there, try to sign in to itunes on your computer. -
Does anyone know what's up with the iPhone 4s' battery life? Some days it last a long time and other days it drains extremely fast.
Not to point out the obvious, but battery life depends very much on what is running and how much the device is being used.
If the battery lasts longer on a day you make no phone calls, but lasts less the day you make 5 hour long calls, this is to be expected.
If however the iPhone has the same level of use on both days, with different power consumption, this would infer a background process (or App) is trying to do something (connecting to server or creating a back up etc).
I switched off all thrid party apps from being included in my iCloud backup, which saves a huge amount of space on the cloud and allows the back up to take barely a couple of minutes.
Battery life seems ok so far on my 64GB 4S (Bluetooth on, Wi-Fi on, Location Services on, Push notifications on, Screen set to just under half brightness with Auto Adjust on) -
What does the Mouse Pointer with Letter 'M' mean?
Couldn't find any info on this via search, and I'm still a little new to LP8 so pardon this question if it's been asked many times before.
Just wondering what the mouse-pointer with the letter 'M' attached to it means. I notice it pops up when I open songs I made in Logic Pro 6 inside Logic Pro 8.
Thanks,
DavidNever ceases to amaze me how many times I answer my own questions on various forums but only, of course, after actually posting it. No wonder it didn't pop up on any searches.
It's the mute tool in case any other newbies stumble upon this post. -
After updated software on mac mini with os x 10.7.5 and restart the mouse pointer after about 30 sec. converted to the rainbow wheel and I can't control the computer. The rainbow wheel was runnig 8 hrs and I turn off mac mini by power button, then I turn on mac mini with key Shift and p/w, checked HD. My HD has
capacity 499.25 GB used 86.91GB. Is there a solution to fix this problem axcept the reinstall os?Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in safe mode.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click the line of text below to select it:
for k in /Sy*/L*/Ex*/{,.?}*.kext; do test -f "$k/Contents/Info.plist" && /usr/libexec/PlistBuddy -c "Print :CFBundleIdentifier" "$_" | egrep -qv "apple|Accusys|ArcMSR|ATTO|CalDigit|HighPoint|hp-fax|JMicron|print|SoftRAID|stex" && echo $k; done | open -f -a TextEdit
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). A TextEdit window will open with the output of the command. Post the contents of that window, if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
Step 2
Repeat with this line:
sudo defaults read com.apple.loginwindow LoginHook | open -f -a TextEdit
This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
Repeat with this line:
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null | open -f -a TextEdit
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 4
osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null | open -f -a TextEdit
Remember, Steps 1-4 are all copy-and-paste — no typing, except your password. Also remember to post the output.
You can then quit Terminal. -
I downloaded and installed XI and when open wants me to buy DC and reenter serial number this gives and error. Does anyone know how to talk with Adobe Chat
Hi Kevin ,
It seems like you are getting update to Install Acrobat DC .That is the latest version of Acrobat .
If you are getting an error message along ,could you please share the screen shot of the same so that we can check at our end.
If you wish to connect with Adobe support team ,refer the following link to get in touch with them.
http://helpx.adobe.com/x-productkb/global/service-ccm.html
http://helpx.adobe.com/x-productkb/global/service1.html
Regards
Sukrit Dhingra -
My macbook keeps asking me to use an administrator and their password to continue but nobody seems to know who is the administrator for this computer...does anyone know how to avoid this this or figure out who the administrator is?
Lynne130,
to figure out which users have administrative privileges, open the Users & Groups pane of System Preferences; each user other than the Guest User will be shown with a description of either “Admin” or “Standard”. It’s typical for the first user created on a Mac to be an administrative user. -
since installing Lion I keep getting the error message 'there was a problem connecting to the server. URLs with the type 'file:" are not supported"' How can I fix this?
A Davey1 wrote:
Not a nice answer!
Posting "Check the 'More like this'" area and not simply providing the answer is a great way to make these groups worthless.
You're ignoring context. On the old Apple Discussion Groups I never posted replies like that, instead giving people relatively detailed answers. The new Apple Support Communities made things worse by introducing certain inefficiencies. Then came Lion. The flood of messages that came with Lion required a painful choice for any of the people who had been helping here: (1) Give quality responses to a few questions and ignore the rest. (2) When applicable, give a brief answer such as the one that you found objectionable. (3) Give up all the other normal activities of life and spend full time trying to answer questions here.
People who needed help with Lion problems seemed to have trouble discovering existing message threads that described how to solve their problems. I never posted the suggestion of "Check the 'More like this' area" without verifying that the help that the poster needed could be found there. Even doing that, what I posted saved me time that I could use to help someone else.
The people helping here are all volunteers. None of them is being paid for the time they spend here. They all have a life outside of Apple Support Communities. It's arrogant of you to demand that people helping here spend more time than they already do. -
How do I get the internet connection back onto ipad even though it connects to Wifi successfully and I have checked on my iPhone which does connect via the same wifi and to the internet?
Your router may not have given your iPod a valid IP address. Go to Settings > Wifi > your network name and touch the ">" to the right to see the network details. If the IP address shown starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
Sometimes the fix can be as simple as restarting your router (remove power for 30 seconds and restart). Next, reset network settings on your iPod (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
If you need more help please give more details on your network, i.e., your router make/model, the wifi security being used (WEP, WPA, WPA2), etc.
Maybe you are looking for
-
Keyboard(s) won't pair with ANYTHING
I'm at my wits' end. I have two Mac towers -- one is an Intel-based CPU and the other is a PPC-based CPU. They're both G5s. So, I have two wireless keyboards. One is certified Apple, the other is generic, from China. Neither of them can be coaxed to
-
How can i open a numbers '08 file in the newest 3.5 version?
I need to open several numbers files that were created in Numbers '08 v 1.0.3. My computer only has v 3.5 of Numbers and when I attempt to open it tells me to save them as Numbers 09 but I can't even open the files to resave them.
-
Novice needs help with multi-cam
Hi, I've got 3 cameras and a seperate audio track synched in my timeline. (CC Premiere Pro 6 on a PC with - unfortunately, Windows 8) The cameras didn't all start at the same time but no problem the clips are where they need to be now. I've made seve
-
PS Elements 2.0 came free with my new scanner from Canon. The scanner is to start a project scanning all family photos and slides and adding text info. Would updating to PS Elements 6.0 be worth $99 ? Thanks. Windows XP, HP deskjet 812C, 1.0 GB RAM
-
Invoking web based email client using Email button
I have developed a form using Adobe LiveCycle designer 8 which has an email button. Right now, when the email button is clicked, the form is attached as PDF to the desktop based default email client, Novell or Outlook express. Is it possible to have