Does anyone have a solution for the I phone 4 acting as though it is sideways under most applications?  Is there a simple solution?

My daughters I phone 4 acts as though it is sideways when being used for the camera, messaging, and music,  Shutting the phone off seemed to fix it the first time, but it has acted up again and that remedy no longer works.  Am I missing something in the settings ?  Is there a simple solution ?  Thanks

Hi,
Some of what you are describing is commun to a lot of user, some other not.
For specific third party apps crashing, I guess you will have to wait until an update for iOS6 from the developpers.  As for the App Store crashing, some research in forums that this is to be spreaded to many users.  For this one, no options seems to efficienly handle the issue and therefore, we will have to wait until an Apple update.
The fact that all your apps are crashing and that you got slow performances seems to be a more specific issue.  I think that performing a restore on your iPod should worth your time.  I personally got a few crashing apps as well as the AppStore but other than this, performaces are quite as with iOS5.

Similar Messages

  • Does anyone have a cure for the following error running on Windows, "The procedure entry point sqlite3_wal_checkpoint could not be found located in the dynamic link library SQLite.dll.

    Does anyone have a cure for the following error running on Windows, "The procedure entry point sqlite3_wal_checkpoint could not be found located in the dynamic link library SQLite.dll.

    I have searched my computer for that file SQlite3.dll and also file QTCF.dll and I cannot find either one when I search my whole computer for it.  I cannot fix this!  I deleted Itunes and every time I try to download it, it goes through all this download till the end when it says that iTunes.exe-entry point now found and that Procedure entry point message comes up.  HELP!  This is driving me crazy.  How can I get itunes to work again when I can't find the danged .dll file to remove, move or rename!?!?!??

  • HT1338 Does anyone have a fix for the error message "Because a USB device was drawing too much power from your computer one or more of your USB devices have been disabled" - this is a brand new machine with nothing connected to the USB ports - i've done u

    Hi
    does anyone know how to fix the message on my iMac:
    "Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled."
    This is a brand new machine and did not have anything attached to the USB ports"
    Thanks for any help

    If you are getting that message on a brand new Mac with nothing connected to the USB ports, take it back. It is broken.

  • Does anyone have a fix for the error message "Because a USB device was drawing too much power from your computer one or more of your USB devices have been disabled

    I keep getting this error message over and over when all I have plugged in is an Apple USB keyboard and Apple Mouse.  Please help...this is crippling the computer!

    Sometimes you have to reset the SMC two or three times for it to work, don't know why. I've seen that error message before and 100% of the time it was fixed with an SMC reset. I suppose it's possible that your keyboard or mouse IS drawing too much power, do you have access to another you could try?

  • Does anyone have a fix for the "Local Hostname Already in use..."-bug?

    I get this message + an incremental change in hoist name upon each wakeup (iMac, not me!) from sleep. I need a permanent fix, I would not like to play with Aiport settings etc. This issue came afetr upgrade to OSX 10.7.4. Will Mountain Lion fix it?
    Mike

    Tuomasveturi wrote:
    I get this message + an incremental change in hoist name upon each wakeup (iMac, not me!) from sleep. I need a permanent fix, I would not like to play with Aiport settings etc. This issue came afetr upgrade to OSX 10.7.4. Will Mountain Lion fix it?
    Mike
    Never seen it. What makes you think it is a bug? Have seen no reports of it. Sounds like it is all within your settings.
    Pete

  • Time Machine will not let me restore from backups after June, 2013.  I can see the files on the external hard drive but Time Machine skips all of them and goes back to June, 2013. Does anyone have any idea what the problem is?

    Time Machine will not let me restore from backups after June, 2013.  I can see the files on the external hard drive but Time Machine skips all of them and goes back to June, 2013. Does anyone have any idea what the problem is?

    rtilghman wrote:
    telling me to buy a new router is NOT a solution.
    And why not? Apple is selling these things like BigMacs. They can't make enough of them. You've been suffering since May because you refuse to get a decent router.
    Can you imagine if a company that makes a refrigerator told me that I needed to upgrade my electrical system to rectify a problem with their device? What kind of response IS that?!?!
    What if the problem with their device is that it requires a new-fangled "grounded" outlet and your circa 1890 house doesn't have grounded outlets. Would you refuse to purchase a $ 25 adapter on principle?

  • Does anyone have a suggestion for an alternative to iCal that will interface with the Cloud? I find iCal to be poorly designed and not very efficient.

    Does anyone have a suggestion for an alternative to iCal that will interface with the Cloud so it works on the iPhone and the Macbook? I find iCal to be poorly designed and not very efficient. I waste a lot of time entering information because you can't go to a specific day and enter information, nor can you navigate between months and add information on a specific date by clicking on the date. You can't easily scroll month-to-month and once you do by scrolling through nine months to get to where you want to be, you cannot enter information by clicking on a specific day in the month and entering information. I just called Apple and they verified that this is the way it works. You cannot go to a date and enter information, you keep getting thrown back to today and then you have to go into the calendar and change it manually on the screen. It is just not efficient.

    APC, CyberPower are reliable.
    Look for 1500VA. As example:
    APC
    http://www.amazon.co.uk/APC-Back-UPS-Pro-1500-Connector/dp/B0041MP81Y/
    Cyperpower:
    http://www.amazon.co.uk/Dell-CyberPower-Intelligent-LCD-1500VA/dp/B005DL5L50/

  • I am using photoshop cc 2014.2 And when I use save for Web it gives me a dialog box that says it is using Latin characters I've never seen this before. Does anyone have an answer for this problem or do I need to go back to the older version of Photoshop.

    I'm using Photoshop cc 2014.21 I you save for Web and dialog box comes up that says that Photoshop is using Latin characters and that servers cannot recognize Latin characters in webpages and you may have trouble viewing these pages does anyone have an answer for this problem?

    What Firefox version is currently installed on the computer?
    You can find the full version of the current current Firefox release (37.0.2) in all languages and all operating systems here:
    *https://www.mozilla.org/en-US/firefox/all/
    If you have a very old Firefox version then you could consider to uninstall that version to clean up existing registry keys (especial the uninstall key).
    Make sure NOT to remove "personal data" when you uninstall Firefox, because that will remove all profile folders and you lose personal data like bookmarks and passwords including data in profiles created by other Firefox versions.
    Check the Firefox program folder and remove the Firefox program folder if there are still files left in it.
    *(32 bit Windows) "C:\Program Files\Mozilla Firefox\"
    *(64 bit Windows) "C:\Program Files (x86)\Mozilla Firefox\"
    It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    *http://kb.mozillazine.org/Uninstalling_Firefox
    Your bookmarks and other personal data are stored in the Firefox profile folder and won't be affected by an uninstall and (re)install, but make sure NOT to remove personal data when you uninstall Firefox as that will remove all Firefox profile folders and you lose your personal data.
    *http://kb.mozillazine.org/Profile_folder_-_Firefox
    *http://kb.mozillazine.org/Profile_backup
    *http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

  • HT5463 I turn the do not disturb button on and I am not given any options for setting or calls allowed. Does anyon have a fix for this?

    I turn the do not disturb button on and I am not given any options for setting or calls allowed. Does anyon have a fix for this?

    Do Not Disturb and Notifications
    Push notifications appear in Notification Center and alert you to new information, even when the
    associated app isn’t running. Notifications vary by app, but may include text or sound alerts, and
    a numbered badge on the app icon on the Home screen.
    Turn off all notifications: Go to Settings and turn on Do Not Disturb. When it’s turned on and
    iPhone is locked, all notifications and calls are silenced, but alarms will still sound. You can set the
    following options in Settings > Notifications > Do Not Disturb:
    • Automatically turn on Do Not Disturb: Set the starting and ending hours for when you don’t
    want to be disturbed. iPhone turns on Do Not Disturb during these hours each day.
    • Allow some phone calls during Do Not Disturb: When Do Not Disturb is on, calls are silently sent
    to voice mail. To allow some callers to ring through, tap Allow Calls From. You can allow calls
    from your Favorites list or other Contacts groups you define. For information about Favorites,
    see Chapter 25, Contacts, on page 100.
    • Allow persistant callers to ring through: Turn on Repeated Calls. If the same caller (based on
    their Caller ID) calls you twice within three minutes, iPhone will ring.
    Turn an app’s notifications on or off: Go to Settings > Notifications. Tap an item in the list, then
    turn notifications on or off for that item. Apps that have notifications turned off appear in the Not in Notification centre

  • Does anyone have corrective advice for me to follow? In attempting to update the iPhone to the iOS6 today (from iOS5.1), I received the following error message: The iPhone "[my name]'s iPhone" could not be updated. An unknown error occured (-1). Thanks, A

    Hi everyone
    Does anyone have corrective advice for me to follow please?
    In attempting to update the iPhone to the iOS6 today (from iOS5.1), I received the following error message:
    The iPhone "[my name]'s iPhone" could not be updated. An unknown error occured (-1).
    Thanks,
    tooborac1

    Error 1 or -1
    This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.

  • Does anyone have any suggestions for password protecting e-mail on the i pad?

    Does anyone have any suggestions for password protecting e-mail on the i pad?  Other people sometimes want to use my i pad but I don't want them to have access to my e-mail (which is on AOL)
    Presently you can password protect the whole i pad by having to put in a 4 digit code to open it, but once it's open whoever is using it has access to everything you have on it.

    Skydiver...that did it!!  I shut the mail app from automatically opening and now I can sign onto my AOL acct. through Safari!!  I had called Apple Care and had asked  different peope in Apple stores about this and no one but you had any suggestions!  YAY!!  Thanks!!!

  • I have an iPod Nano 6th Generation for just over three months and the down volume button is sticking.  Does anyone have a recommendation for resolving?

    I have an iPod Nano 6th Generation for just over three months and the down volume button is sticking.  Does anyone have a recommendation for resolving?

    Dont buy this model again, this is the most common problem and i have gone through 4 of these 6th gen nanos all with the same problem.  You can find youtube videos that show you how to fix it yourself but you run the risk of breaking your ipod, also opening the ipod voids any warrently.

  • I have an early 2008 Mac Pro, 8 gb ram with a Dell 27" display and a 42" LG TV. I am thinking about upgrading the stock ATI Radeon 2600 graphics card for better resolution, preferring 2 dvi outputs. Does anyone have any suggestions on the best card?

    I have an early 2008 Mac Pro, 8 gb ram with a Dell 27” display and a 42” LG TV. I am thinking about upgrading the stock ATI Radeon 2600 graphics card for better resolution, preferring 2 dvi outputs or 1 dvi and 1 vga vs 1 dvi and a mini. I don't do a lot of Final Cut Pro, gaming, etc. I am interested in best value for the graphics card.
    Does anyone have any suggestions on the best graphics card for these larger displays for the best value?
    Thanks,
    Kevin

    I recommend you install nothing older than the Apple-firware 5770, about US$250.
    RE: Mac Pro Replacement Graphics cards
    1) Apple brand cards,
    2) "sold in the Apple store" cards, and
    3) "Mac Edition" cards ...
    ... show all the screens, including Boot up screens, Safe Mode, Installer, Recovery, debug screens, and Alt/Option boot screens. At this writing, these choices include:
    1) Apple brand cards:
    • Apple-firmware 5770, about US$250** works near full speed in every model Mac Pro, Drivers in 10.6.5
    • Apple-firmware 5870, about US$450
    2) "sold in the Apple store" cards
    • NVIDIA Quadro 4000, about US$1200
    • NVIDIA Quadro 5000, about US$2500
    3) "Mac Edition" cards -- REQUIRE 10.8.3 or later:
    • SAPPHIRE HD 7950 3GB GDDR5 MAC Edition, about US$480** Vendor recommends Mac Pro 4,1
    • EVGA GTX 680 Mac Edition, about US$600
    The cards above require no more than the provided two 6-pin aux power connectors provided in the Mac Pro through 2012 model. Aux cables may not be provided for third-party cards, but are readily available.
    If you are Meet ALL of these:
    • running 10.8.3 or later AND
    • don't care about "no boot screens" etc AND
    • can re-wire or otherwise "work out" the power cabling, THEN:
    You can use many more cards, even most "PC-only cards"

  • Does anyone have any suggestions for Ad blocking? I'm getting a lot of pop up ads while using Facebook from Safari.

           I'm getting a lot of pop up ads. mostly while using  Facebook. I'm running Safari on a Macbook Pro running Yosemite. Does anyone have any suggestions for an Ad blocker. I don't see anything in the App store.
          I can't swear to it but I don't recall this being a problem pre-Yosemite. I could be wrong. I haven't been real active on Facebook until recently. I see some third party apps out there but am alway wary of non approved software.
         Thanks
         Ron

    You may have installed the "VSearch" trojan. Remove it as follows.
    Malware is always changing to get around the defenses against it. These instructions are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
    Back up all data before proceeding.
    Step 1
    From the Safari menu bar, select
              Safari ▹ Preferences... ▹ Extensions
    Uninstall any extensions you don't know you need, including any that have the word "Spigot," "Trovi," or "Conduit" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
    Reset the home page and default search engine in all the browsers, if it was changed.
    Step 2
    Triple-click anywhere in the line below on this page to select it:
    /Library/LaunchAgents/com.vsearch.agent.plist
    Right-click or control-click the line and select
              Services ▹ Reveal in Finder (or just Reveal)
    from the contextual menu.* A folder should open with an item named "com.vsearch.agent.plist" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
    Repeat with each of these lines:
    /Library/LaunchDaemons/com.vsearch.daemon.plist
    /Library/LaunchDaemons/com.vsearch.helper.plist
    Restart the computer and empty the Trash. Then delete the following items in the same way:
    /Library/Application Support/VSearch
    /System/Library/Frameworks/VSearch.framework
    ~/Library/Internet Plug-Ins/ConduitNPAPIPlugin.plugin
    Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
    The problem may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine article from mplayerx.org.
    This trojan is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow.
    You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the Internet criminal behind VSearch has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing has not done so, even though it's aware of the problem. This failure of oversight has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination  command-C. In the Finder, select
              Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

  • Does anyone have more information on the virus disguised as adobe flashplayer

    Does anyone have more information on the virus disguised as adobe flashplayer that was released last Thursday 5 Apr 12.  Can you simply use time machine to reload the entire system from backup to make sure you don't have the virus.

    On ninemsn TECH news: It's called flashback trojan
    The computer security industry buzzed Thursday with warnings that more than a half-million Macintosh computers may have been infected with a virus targeting Apple machines.
    Flashback Trojan malware tailored to slip past "Mac" defenses is a variation on viruses typically aimed at personal computers (PCs) powered by Microsoft's Windows operating systems.
    The infections, spotted "in the wild" by Finland-based computer security firm F-Secure and then quantified by Russian anti-virus program vendor Dr. Web, come as hackers increasingly take aim at Apple computers.
    "All the stuff the bad guys have learned for doing attacks in the PC world is now starting to transition to the Mac world," McAfee Labs director of threat intelligence Dave Marcus told AFP.
    "Mac has said for a long time that they are not vulnerable to PC malware, which is true; they are vulnerable to Mac malware."
    Dr. Web determined that more than 600,000 Mac computers may be infected with Flashback, which is designed to let hackers steal potentially valuable information such as passwords or financial account numbers.
    Hackers trick Mac users into downloading the virus by disguising it as an update to Adobe Flash video viewing software.
    Apple has long boasted that Windows machines are more prone to hacking than Macs.
    Computer security specialists contend that the reason for the disparity was that since most of the world's computers were powered by Windows, hackers focused on systems that promised the most prey.
    As the popularity of Macs has soared, so has the allure of hacking Apple operating systems, according to Marcus.
    "There has been a significant increase in Mac malware in the last several quarters, so what we've seen with the Flashback Trojan isn't particularly surprising," Marcus said.
    "Cybercriminals will attack any operating system with valuable information, and as the popularity of Macs increase, so will attacks on the Mac platform."
    Computer users, no matter their operating systems of choice, need to protect machines with tactics including up-to-date anti-virus programs and avoiding risky habits such as opening files or clicking links from unknown sources.

Maybe you are looking for

  • Use Host command in Oracle forms 6i

    hi all i use Oracle forms 6i i run in a web and in that i have connect one server so, i have to use Host Command and i have to fire this command host (' net use \\windchillsvr\e\jyotionline /user:dwg_users dwg_users'); But it's Not Connect My Forms i

  • My iTunes Store will not update any apps

    Everything in my iTunes Store works properly, except when trying to update an app. It is showing that I have multiple app updates but when I go to the update tab in the store it is a blank page.

  • WebGUI: How to get the users IP-address

    Hello. I have to develop a simple web-application, that will enable users to reset their forgotten passwords or to unlock themselves, if they are locked because of too many failed login-attempts. As you can imagine, this application must not require

  • Output type in Billing Doc

    Hello, I am having a requirement, I need to pick an output type in transaction VF02 based upon some conditions. We can't to this through NACE transaction since it requires some custom table involvement and it is not possible to handle those condition

  • Showing Fields

    please see this image: http://i1104.photobucket.com/albums/h336/809836724/sd/columns.jpg I am using SE16 on this. How can I make the columns (with DATA) appear? How to choose those columns (with data) without manually checking each column? thanks.