Does anyone have problems with the lightening to USB cable when charging from an outlet? After 6  months of use, it seems to wear out as a result of twisting caused by using the iPad while charging?

Does anyone else have problems with the lightening to USB cables, particularly the longer version, when using the iPad and charging at the same time?
If so, am I doing anything wrong?

Not using any mouse pad, I have a very smooth desktop. But I just tried to use a sheet of A4 printing paper, but no result, the problem persisted.
Someone on this forum suggested, that USB3 may interfere with the magic mouse.
I have 2 LaCie HDD's about 70 cm away from the mouse, I use them on Thunderbolt. But in operation or not - the result is the same, the mouse plays up! Just now I was clicking the desktop and the mouse created a new folder!!
Thanks for the advice, Bee
Cheers, Gerd

Similar Messages

  • Does anyone have problems with iTunes movie rentals freezing in the middle of the movie?

    Does anyone have problems with iTunes movie rentals freezing in the middle of the movie, requiring a force quit, which causes your rental to disappear? This has happened multiple times to me recently. Last time Apple didn't refund my money after reporting the problem. I have been using iTunes for many years but am about to give up.

    Correction: I was refunded for the previous movie freeze.

  • Does anyone have problems with Mail (Display on the right) ?

    Hi to everybody !
    Does anyone have problems with Mail (Display on the right) ?
    What could be the cause of not displaying HTML correctly ?
    Could it be because I use SIMBL, that allows me
    to have Colourful SideBar ?
    Best regards
    Vialatte

    Try This...
    Close All Open Apps...  Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430

  • Does anyone have problems with the ipad 4 staying connected to century link Internet?

    Does anyone have problems with the ipad 4's wi if Internet staying connected to century links Internet??? Please help!!

    LOTS of people reporting a range of similar issues.
    https://discussions.apple.com/thread/6648856
    https://discussions.apple.com/thread/6574287

  • Does anyone have problems with the led light ?

    Does anyone have problems with the led light ?

    LOTS of people reporting a range of similar issues.
    https://discussions.apple.com/thread/6648856
    https://discussions.apple.com/thread/6574287

  • TS3276 Does anyone have problems with sent messages not showing in their Mail? I have two sent folders when really I only want one. Any tips?

    Does anyone have problems with sent messages not showing in their Mail? I have two sent folders when really I only want one. Any tips?

    Not sure if this is a fix, but I tried sending myself a test email from only  the Bcc field, and lo and behold it now shows the Bcc field in all sent item previews;
    ...maybe leaving the 'To' field blank on purpose forced Mail to show it.
    Rebooted the Mail program, still there - rebooted the machine, still there. Hope this is still relevant and it works for you too - J.

  • Does anyone have problems with data usage with att and Iphone5?

    Hello, Does anyone have problems with data usage or non usage I should say with Iphone 5 and AT&T?

    After 4+ months of dealing with this data usage and battery drain problem that included 3 data captures of my wife's iMac, the trigger for us regarding the problems syncing with iCloud, and 5 hours of logs off my iPhone 6 to be analyzed by Apple engineers that included times my wife's computer was both on and off to demonstrate the difference in data usage and battery drain under those conditions, I can say with very reasonable certainty that the iOS 8.3 and corresponding Mac OS 10.10.3 update has solved the problem. 
    We have now been running for about 2 weeks and data usage with the iCloud Servers attempting to sync has dropped from a rate of 31 GBs to under 15 MBs per month.  Yes, you read it right.  We were burning 2000 times as much data doing absolutely nothing important on both of our phones, a 5s and a 6.  Just imagine what that does to battery life!  The 5s would last about 5 hours and the 6 was dead in less than 14.
    The distasteful aspect of this process was how the engineers were quietly fixing the problem at the same time sending messages to my contact person within Apple that were dismissive in nature in the face of indisputable unreasonable results. I must say, this experience with the multiple times the engineers' responses were inappropriate put a little tarnish on the old Apple shine of the ‘It just works’ mantra. This was my first experience in 34 years that caused me to stop recommending Apple products without reservations and with a disclaimer.
    Since the update solved the problem, then I can only conclude that there was a logic bug regarding the reaction within the process to the incoming data that was corrected.  There was noting short of logging out of iCloud that circumvented the problem for us, Gator5000e and probably many others noted on other threads.  I am not trying to imply that this is the cause of everyones battery use problem, but it is reasonable that it was a cause for many.

  • Does anyone have problems with iPhone 5 getting hot?

    Does anyone have problems with iPhone 5 getting hot? I just bought a new iPhone 5 & it's gotten hot twice. Once when I was on FaceTime for 30 min it got hot about 15 min into the call. & once when I was downloading some apps.

    http://support.apple.com/kb/HT2101?viewlocale=en_US
    It is normal for it to get warm when it's being used, especially if it is hot outside. It can even get uncomfortably warm. As long as it is not causing you physical harm (as in giving you burns) or displaying a temperature warning, then it's normal behavior. It's like taking your laptop outside and using it. Except the laptop will probably burn you.

  • Does anyone have problems with hotspot connections or WLAN since they have installed Lion?

    Does anyone have problems with hotspot connections or WLAN since they have installed Lion?

    Same problem for me: Since update to Lion my WLAN connection to my router (AVM fritz!box fon 7141) get's lost almost every time the computer is on idle for a couple of minutes. Deactivating and reactivating helps, but of course only until the problem occurs again.
    BTW: I'm running Mac OS X Lion (10.7.3) on a iMac 27" 3.2 GHz i3 (mid 2010 model).
    I'm really annoyed by this problem and looking forward for APPLES fix.

  • Does anyone have problems with some websites where text is overwritten and it is impossible to navigate the site as the buttons to for example confirm purchases do not work?

    I am having problems with some websites - e.g. Easyjet and more recently the Sport Relief website, where the text overwrites other text and images and it means it is impossible click to accept, confirm or find further information?

    lindsayfromstow on the wold wrote:
    I am having problems with some websites - e.g. Easyjet and more recently the Sport Relief website, where the text overwrites other text
    Post a screen shot.
    What browser and what version are you using?
    Have you tried a different browser?

  • Does anyone have problems with their Safari ever since the latest OS X update?

    I've noticed ever since i have updated to the OS X, i have internet problems. It lags, won't load the same page twice i have to shut down Safari & reopen.
    Does anyone else have this problem?

    http://www.machangout.com/faq
    Here is a recent thread where Glims was the problem:
    My Safari crashes as soon as I open it...??

  • Does anyone have problems with sending iMessages not depending on devices the last days, too?

    We have 4 iPhone 4 iOS 5.1.1 and a MBP Early 2011 OS X 10.8, and there are problems sending iMessages on any of these devices the last days.
    Just the red ! and "Not send" appears. Sometimes the messages is send regardless, but mostly not!

    Hello
    I agree with the user above. I think you have to change the power plan. If you surf in the Internet or write something in Word just switch to Power Saver power plan. This power plan will save a lot of battery power and also reduce the display brightness to enhance the battery life.
    Furthermore here is an interesting article about the power management features of Windows:
    http://aps2.toshiba-tro.de/kb0/HTD84026Q0000R01.htm

  • Does anyone have problems with video playback, jerky video?

    Video playback on my MacBook Pro is jerky, really not workable at all.  Has anyone else had a similar problem?

    This is my pet checklist for questions regarding FCP X performance - you may have already addressed some of the items but it's worth checking.
    Check the spec of your Mac against the system requirements:
    http://www.apple.com/finalcutpro/specs/
    Check the spec of your graphics card. If it's listed here, it's not suitable:
    http://support.apple.com/kb/HT4664
    Make sure you're using the latest version of the application - FCP X 10.0.3 runs very well on my 2009 MacPro 2 x 2.26 GHz Quad-Core Intel Xeon with 16 GB RAM and ATI Radeon HD 5870 1024 MB. I run it with Lion 10.7.3.
    Check that you have at least 20% free space on your system drive.
    If you have not already done so, move your Projects and Events to a fast (Firewire 800 or faster) external HD. Make sure the drive's formatted OS Extended (journalling's not required for video). You should always keep at least 20% free space on the Hard Drives that your Media, Projects and Events are on.
    If you are getting crashes, there is some conflict on the OS. Create a new (admin) user account on your system. Do NOT import any of the settings etc from the old account - simply use FCP X from there - if it runs a lot better, there's a conflict and a clean install would be recommended - but remember, if you reinstall the system, and then use Migration Assistant (or anything else) to import all your old settings etc etc, you may well be importing the cause of the conflict in the first place.
    Keep projects to 20 mins or less (about half that for Multicam). If you have a long project, work on short sections, make them into Compound Clips and then paste these into a final project for export.
    If you ever experience dropped frames, I strongly recommend you use ProRes 422 Proxy - it edits and plays back like silk because the files are small but lightly compressed (not much packing and unpacking to do) - but remember to select 'Original or Optimised Media' (FCP X Preferences > Playback) just before you export your movie, otherwise it will be exported at low resolution.
    If you have plenty of processor power, for the ultimate editing experience, create Optimised Media - most camera native files are highly compressed and need a great deal of processor power to play back - particularly if you add titles, filters or effects. ProRes 422 takes up much more hard drive space but is very lightly compressed. It edits and plays back superbly.
    Hide Audio Waveforms at all times when you don't need them (both in Browser and Storyline / Timeline). They take up a lot of processor power. (Use the switch icon at the bottom-right of your timeline to select a format without waveforms if you don't need them at the moment, then switch back when you do).
    Create folders in the Project and Events libraries and put any projects you are not working on currently, in those folders. This will help a lot. There's a great application for this, called Event Manager X - for the tiny cost it's an invaluable application.
    http://assistedediting.intelligentassistance.com/EventManagerX/
    Unless you cannot edit and playback without it, turn off Background Rendering in Preferences (under Playback) - this will help general performance and you can always render when you need to by selecting the clip (or clips) and pressing Ctrl+R.
    The biggest single improvement I saw in performance was when I upgraded the RAM from 8 GB to 16.
    Andy

  • Does anyone have problems with Maps connecting to LTE?

    My maps apps, both Maps by Apple and Google Maps, will not connect to the servers and resume funtioning when the phone is connected to LTE. If I turn off LTE and run 3G it connects and functions perfectly. When connected to WIFI it works perfectly as well. I would like to utilize the speed of my LTE coverage in my Maps apps. Has anyone else had this problem? And have you discovered a solution?
    Verizon
    iPhone 5
    iOS 6.1.2

    I have this exact problem.  Also affects any app that is using map services (like foursquare).  I've had Apple replace the phone (didn't help), had Verizon replace the SIM card (didn't help), and so I am still trying to solve this while Apple and Verizon point at each other and say that the other one is the problem.
    Sorry no solution, but I hope one pops up here on this thread!

  • Does anyone have problems with Bluetooth connection to stereo in car

    I'm having problems with my iPhone 4 regarding my car Bluetooth was fine before update but after update nothin but problems sometimes it connects but very low volume also when I come out of car my ringer volume goes down very low meaning If I don't turn it backup I can't hear incoming calls or message tones already had replacement phone from apple but once again after update same problem do u guys know if apple are aware of this problem as guy  at genus bar basically saying that it's my stereo that needs updated my car is a 2011 seat Leon which stereo is made for iPhone 4 contacted garage and they said its down to the update I have read of a few problems like on forums and wondering when the geniuses are going together finger out and sort these problems out as I feel like throwing my phone out the window when it starts it none sense also when it connects with low volume in car I have to turn the Bluetooth off and back on again for it to connect properly

    Hello:
    I think you should contact Pioneer as both devices you mention are from that manufacturer.
    Barry

Maybe you are looking for

  • Why are people calling saying I called them?

    Over the last few months I've been periodically getting people calling me from numbers I don't recognize. I don't answer (I prefer to call unfamiliar numbers back after they leave a voicemail unless I'm actually waiting for a call) and when I check t

  • Migration of Windows Small Business Server 2003 to Windows Server 2012 Essentials

    Hi, I am trying to migrate Windows Small Business Server 2003 to Windows Server 2012 Essentials by following the steps given in the link below: http://technet.microsoft.com/en-us/library/jj200112.aspx I have looked at other threads on the forum but n

  • Blue bar won't fully load..........

    Everytime I open Safari, the blue bar fills up until just short of the end and then stops. The Apple home page is clearly visable but I cannot go any further, if I click on any links or type in another web address the blue bar goes back to the start

  • For what purpose the ?? marks are used in the following query

    Hi, can anybody guide me the purpose of using the ?? in the given scrip, i.e SELECT GJL.period_name Period_Name, GJH.je_source Je_Source, GJH.posted_date Posted_Date, GCC.segment1||'-'||GCC.segment2||'-'||GCC.segment3||'-'||GCC.segment4||'-'||GCC.seg

  • No archive after refreshing

    I cloned the production system and after cloning, I enabled archiving in the cloned system. today to refresh the target system with that of the source system,copied all the datafiles and it is working fine..but not, in the refreshed cloned instance,