Does anyone know how to monitor a microphone when using Voice Over tool?
I use Final Cut studio in conjunction with an AJA Kona LHe card. Audio inputs are via the AJA. I monitor the output from FCP through the AJA card via a Samson C-Control (monitor matrix). Here's my problem. When I'm recording voice over, I am unable to monitor the sound from the microphone through the headphones (or speakers). There is definitely an audio feed being routed to the headphones as I am able to hear the audio cue countdown. The microphone is working fine too - when it comes to playing back the voice over through the headphones (or speakers), I can hear the track absolutely fine. Has anyone experienced the same problem... and do you know how to solve it? Many thanks, AW
its not that you've anything screwy going on .. this is the way it is engineered to work.
the pre-existing audio (and cues) is routed to the headphones but not the voice being recorded.
the solution is to use an audio mixer to monitor both the voice over and the timeline
Similar Messages
-
Does anyone know how to load ACR presets when using ACR in the creative cloud?
Does anyone know how to load ACR presets when using ACR in the creative cloud?
Moving the discussion to Adobe Camera Raw forum.
Thanks,
Atul Saini -
Does anyone know how i can view PDF files using Galaxy Note 2?
Does anyone know how i can view PDF files using Galaxy Note 2?
This is what i have been doing;
I click on the file i wish to view (via a portal)
this file goes to notification widget (i drag down screen)
notification/message says download complete
i click on notification/message
nows it says complete action using (here i only have 2 icon options 1= DB Text Editor 2 = HTML Viewer)
I have installed Adobe Reader.Can you confirm if the downloaded file is a pdf file, that is it ends with .pdf?
-
Does anyone Know how to fix error 0xe8000065 when connecting the ipod touch 4g
does anyone Know how to fix error 0xe8000065 when connecting the ipod touch 4g
See:
iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting -
Does anyone know how to get an ipad to use the wireless network from an airport?
Does anyone know how to get an Ipad to use the wireless network from an airport express?
By default, the AirPort Express will broadcast an unsecure wireless network with a Network Name of something like: Apple Network NNNNNN. Your iPad should "see" this network and be able to connect to it. Have you tried going through the iPad's Settings > Wi-Fi > Choose a Network... option. If so, does the AirPort's wireless network appear in the list of available networks?
Can other wireless devices connect to the AirPort's network? -
Does anyone know how to edit an ITunes song, using either ITunes, or another app
Does anyone know how to edit a song in ITunes? I want to shorten some songs. Thanks for any help. Tod
The following user tip might be of some help:
Chopping a music track into shorter pieces using iTunes for Windows -
After Aple support downloaded the new 10.9.2 Maverick upgrade on my MacBook Air, my Photosmart C4480 3 in 1 printer can not scan a document and load the file on to my desktop or document file. (You can see the doc image in the preview but it doesn't save it.) Does anyone know an Apple fix for this or when the fix will be out? After hours of trying reloading, and the usual fixes, etc. Apple told me to call HP, and HP told me they don't support Mac. It does not seem honorable of Apple to put out an upgrade and not tell people it will destroy their scanning ability, and that the only thing to do is to buy another printer/scanner.
Have you tried using Applications/Image Capture to scan.
Vuescan often works.
VueScan
VueScan FAQ -
The iPhone app for Adobe Reader is automatically saving the form each time it is filled out. (Windows Adobe Reader does not do this.) This means that you have to manually clear each field before you can use the form again. Does anyone know a work-around?
Thanks,Hi,
Please post your question to the Adobe Reader for iOS user forum:
http://forums.adobe.com/community/adobe_reader_forums/ios
Regards,
Brian -
I just received my cable modem from Hitron and I am unable to connect to it. My phone and other computers and see it as a wireless network but my Macbook doesn't even show it a network that I can connect to. It is totally invisible to my Macbook. Can anyone help with this?
Assuming "BellSouth" uses the same procedure as "SBCGlobal", which are now both ATT/Yahoo, as far as I know:
Take router from box. Connect to power outlet and phone outlet.
Take Ethernet cable, plug one end into the router's jack marked LAN, plug other end into your computer's Ethernet jack.
Point your Web browser to 192.168.1.1 (enter this into your browser's address bar, actual address might vary, check your router's documentation.)
A Web form will appear. Set router to PPPoE, if necessary. Enter the user name your ISP gave you. Enter the password.
Watch all the lights on your router go green.
Or, if the router is already set up, since you used it with your Dell laptop previously:
Take Ethernet cable, plug one end into the router's jack marked LAN, plug other end into your computer's Ethernet jack. Done.
The second from the left is your Ethernet jack:
http://store.apple.com/Catalog/US/Images/mb-side-white-050906.jpg -
So, I have a macbook pro. I used earphones to listen to music and everything worked fine. A few hours later, after it had been unplugged, I tried to listen to a video and the sound did not work. I have tried everything. Rebooted my computer multiple times, reset the PRAM twice, and checked my MIDI setup. When I go to sound through system preferces, this is what shows up: Output -- Digital out -- optical digital-out port and there is no option for external speakers! It isn't even showing that I have them!!! My internal settings are fine. HELP please!
This is a part of the larger MacBook Pro connectivity issue. There are several related threads dealing with the MBP's networking problems. If your unit is suffering from this type of difficulty, good luck ... (or a long ethernet cable)
(PS Everybody please make noise on this one so apple comes up with a solution.)
< Edited by Host > -
example here:
http://www.cupsannual.ca/
the example shows that some of the graphic wont start playing until you scroll and only when visible to the scroll level(not sure about the right term for that)
thank you in advance!I wrote about this in a series of blog posts (part 1 is here: http://www.raymondcamden.com/index.cfm/2013/4/3/Delaying-an-Edge-Animate-asset-until-visib le), although it is focused on when the animation is *visible*, not some arbitrary point. You should be able to modify it easily enough though.
-
Does anyone know how to watch downloaded shows without using 3g or wifi?
since my carrier Throttles me if I watch shows, and I do not have access to wi-fi at work, I would like to find a way to watch downloaded shows/movies without using 3g data services
You do not need internet connection at all to watch downloaded content.
-
Does anyone know how to combine two apple ID's together?
I have found out that I have two Apple ID's! One is for my apps on my iphone and the other is for iTunes. Somehow they are set to different email addresses but are being sent to the same email address. Does anyone know how to combine them, so I use just one Apple ID?
This is my solution too.
You see, what I also downloaded all the free apps I have on iPhone to this account I choose to use, so this way I didn't need to change accounts (of course it was on the iOS 5 times) -
Does anyone know how to load a file from the source directory?
I have a Photoshop panel that uses the Texturizer function. I would like to use the images in the src images directory of the project. I need to reference the /src/images directory of the panel when the project is running.
Does anyone know how to access the source directory using action script?
I have tried a number of options but only seems to work if I hard code a location
public static function Mat02(): void
// Works
var myTexture:File = new File("C:\\Users\\Ed\\Adobe Flash Builder 4.6\\LayoutBuilderSuite\\src\\images\\mat 02.psd");
// Tried - no luck
// var file = File.applicationStorageDirectory.resolvePath("mat 02.psd");
// var file:File = File.applicationDirectory.resolvePath("mat 02.psd");
//var file:File = File.applicationStorageDirectory;
//file = file.resolvePath("mat 02.psd");
//var myTexture:File = File.applicationDirectory.resolvePath("mat 02.psd");
//var myTexture:File = File.documentsDirectory.resolvePath("mat 02.psd");
var desc5:ActionDescriptor = new ActionDescriptor();
desc5.putEnumerated( app.charIDToTypeID( "GEfk" ), app.charIDToTypeID( "GEft" ), app.charIDToTypeID( "Txtz" ) );
desc5.putPath( app.charIDToTypeID( "TxtT" ), myTexture );
desc5.putInteger( app.charIDToTypeID( "Scln" ), 150 );
desc5.putInteger( app.charIDToTypeID( "Rlf " ), 4 );
desc5.putEnumerated( app.charIDToTypeID( "LghD" ), app.charIDToTypeID( "LghD" ), app.charIDToTypeID( "LDBR" ) );
desc5.putBoolean( app.charIDToTypeID( "InvT" ), false );
app.executeAction( app.charIDToTypeID( "GEfc" ), desc5, DialogModes.NO );
ThanksI haven't seen too many questions like this on this forum. Did you also try the photoshop forums?
-
Does anyone know how to insert an Articulate Engage interaction into a Captivate 2 project?
I would like to insert an Articulate Engage interaction into
a Captivate 2 project. And,er, that's it really. Does anyone know
how to do it? When I try to insert the Articulate project as an
animation, it functions fine in the preview screen, but once it's
been inserted all I get is the loading screen.Hi again darren.winter
If I were in your shoes, here is what I'd try. Place the
content from Articulate in a specific folder. Then publish your
Captivate to the same folder to ensure all files are there
together. Then test. Obviously, this may work or it may fail. And
just as obviously, if it works, you're done!
If it fails, I think I'd try publishing my Captivate using
different settings. Try publishing for different Flash versions.
You might find that if you target Flash 6 it fails, but 7 or 8 may
work.
If the Flash version bit fails, are there some settings in
Articulate that allow you to reduce the number of files that are
required? For example, I know that when Captivate 2 came out, many
folks had to scramble (and some still do) over the fact that it
produced multiple output files. Some LMS' didn't like the fact
there were typically two .SWF files to distribute. We then learned
we could eliminate one of the .SWF files by turning off the
borders. So I'm wondering if perhaps Articulate may have similar
output options you could use.
Hopefully something here helps... Rick
Maybe you are looking for
-
How to delete duplicate items in SQ01 output
Hi, I created a query to extracted fixed asset from table ANLZ join ANLA, ANLZ for legacy fixed asset upload. But in the output list , every fixed asset line item is output by triple line items. How can I do to delete the duplicate items when out
-
Why am I getting an error when saving photos from mini ipad to macbook air?
I'm trying to download photos from my mini iPad to my MacBook Air and I got the attached message. Tried doing it several times and still got the same result. Is it because my start up hard disk is almost full? Please help. Thank you.
-
Xfce's default app settings keep getting changed.
My xfce default app settings are constantly being changed to KDE apps.
-
WPS time out when installing B209a for wireless connection to Macbook Pro
I'm not good with computers and I'm new to the MAC computer system but I believe I was following the instructions correctly until I received the error message "WPS time out". Any help would be highly appreciated.
-
Bootcamp, XP, ATI card & Stalker: Shadow of Chernobyl
I recently purchased S.T.A.L.K.E.R. Shadow of Chernobyl to play on XP on my Mac Pro While I've read LOTS of posts on other sites about how buggy this game is, my concern (and my reason for posting here) is that the game seems to push my ATI card to t