Does anyone know what sort of cable I need to hook a Nikon Coolscan 4000 ED scanner up to my new MacBook Pro? Thank you
Does anyone know what sort of cable I need to hook a Nikon Coolscan 4000 ED scanner up to my new MacBook Pro? Thank you
A FireWire 400 to FireWire 800 cable:
http://www.monoprice.com/products/product.asp?c_id=103&cp_id=10301&cs_id=1030105 &p_id=3542&seq=1&format=2
You may have a problem with Nikon's driver software for the 10-year-old scanner, though — Nikon may not have updated it for compatibility with recent OS X versions. Check Nikon's site for updates.
Similar Messages
-
Does anyone know how to connect an older 20" cinema display with the (ADC) adapter end and connect it to a MacBook Pro 17" 2008 model (DVI) ?????
I believe you naeed the Apple ADC to DVI adapter.
-
Light is flashing continueously on the front of the apple tv. No picture and no sound. Does anyone know what is wrong? Everything is plug in correctly. When I disconnect everything and re plug it in the apple icon comes up, but then blank screen with no sound and no picture. Does anyone know what is wrong?
l have an apple tv 2 generation please help meWelcome to the Apple Community.
If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Devices list, and then click Restore.
(You may already have a micro USB cable if you have a camera or other digital device) -
MacBook Pro (Retina, 15-inch, Mid 2014) will not read an SD card in the SDXC card reader. Does anyone know whats going on?
Hi David. I don't have as modern a Macbook Pro as you, mine is a 2012 model, but perhaps I can help. I often find that my SD card will not load when I first insert it. I have to remove it and then put it into the slot again firmly.
You also haven't posted any information about the SD card. What size is it, do you know how it is formatted, has it worked in that same mac previously, where did it come from, does it currently work in another device (such as your camera)? This sort of information will help to narrow down the problem.
If you post some more information I'm sure people will try to help you. In the meantime, if you look at your post again you should see "More Like This" at the bottom of the page and you may find an answer in some of those related posts.
Hope that helps.
Ivan -
A few days ago, I plugged my ipod touch into my computer to charge it, and also add new music I purchased. When I unplugged the USB cable ( I disconnected it from the ipod first, as I was told to do) I went to look through my music. There was a notification, I don't remember what it said verbatum, but the gist was "177 songs could not be properly synced onto your device". Now, I'm missing music from my itunes library. For example, I purchased two full albums from the same band, now over half the songs from the albums are just gone, they are no longer on my ipod or itunes. Does anyone know what happend, and/or how I can fix this? Please and thank you
P.S. This happend after installing itunes 6, I've noticed many other people are also having problems with it as wellCould be several things. Without more information like what was the wording of the error message I will not even guess.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
I am trying to restore my phone from the backed up information on my computer. It is asking me for a password. I tried my screen lock code and my apple id. Does anyone know what password it wants?
recovery mode
open itunes on computer
plug cable into computer not phone
turn phone off
hold home button and plug cable into phone. do not release home button until an itunes graphic appears on device.
look to computer should have message about recovery mode click ok and restore
Peace, Clyde
if u need an article see
http://support.apple.com/kb/HT1808
if it says turn find my device off can be done at icloud.com or on the device settings - icloud - find my device -
Does anyone know what code 43 is?
does anyone know what code 43 means ipod isn't being recognized by computer or docking station and wont charge only in sleep mode?
Check for hardware issues
Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the alert when you update or restore, contact Apple support.
Common errors: 1, 10-47, 1002, 1011, 1012, 1014, 1000-1020.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I have 2 Airport Base stations that I am trying to use to extend my WiFi but I cant get them to work. I downloade Airport Utility to windows 7 and it doesnt recognize any devices. I have them plugged in and they have a solid yellow light. Does anyone know what I need to do to get them to work. Your help would be appreciated.
Thanks for providing the model information.
I would recommend that you start by performing a "factory default" reset on all of your AirPort base stations. Once completed power them all down. While powered-down, temporarily connect both Express base stations to an open LAN port on the Extreme using separate Ethernet cables.
Once connected, power up the Extreme; wait five minutes, and then, power up each of the Express base stations. Which you power-up first doesn't matter.
Now start up the AirPort Utility on the PC. It should now "see" all three base stations. If so, go ahead and configure your extended network.
Please post back your results. -
my ipod 5 froze and wont work or anything and my home button doesnt work so i cant soft reset or anything does anyone know what to do about this?
Try:
- iOS: Not responding or does not turn on
Ignore the reset and when it says plae the iPod in Recovery mode
Place the iPod in recovery mode using one of these programs:
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
or
http://joshuabailey1997.wordpress.com/2010/09/02/recboot-v1-3/
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and
RecBoot tip
RecBoot may have problems on 64X windows, then try:
Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single Click
For MAC or PC
The Firmware Umbrella - TinyUmbrella
Installs blootware on PC too
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Does anyone know what to do when there is a white flashing light on the Apple TV
It means the update failed and your AppleTV can't start.
You need to restore by connecting to a computer running current iTunes via a USB to micro USB cable.
See:
http://support.apple.com/kb/HT4367
Pay attention to differences in power connection depending on whether or not you have AppleTV2 or AppleTV 3. -
Since I have installed the new iOS 7 software on my ipad mini my Barclays online software is not transferring money between accounts. Does anyone know what I should do?
I did and they don't appear to have problems. I have only had this problem since the update. I have met someone else who has the same problem with her iPhone update. The problem appears to be with apple but how do I get it sorted?
-
I have an old Black MacBook (2008)...does anyone know what kind of FireWire it has? Is it a 4-pin or 6-pin?
And there is cable from 6-pin to 9-pin (FW400 to FW800) available from
the apple store or anywhere quality computer products are sold...
saw a belkin brand on 2M cable. Also adapters appear, in a search.
And Thunderbolt to FireWire, for those instances where a newer Mac may not
have FireWire or need to use a peripheral via that port.
What are you connecting? -
Does anyone know what kind of bluetooth headset will work on my Powerbook?
Hi,
I just found out that my LG headset will not wirk with my bluetooth 1.1+EDR hardware. Does anyone know what will?
ThanksHello,
Thanks for the responce.
I was hoping for a wireless headset for easy to use on the road with out bluky cables. -
I'm in cycle mode, and 'merge' is clicked in preferences. However, when I record, my previous track data keeps getting overwritten. Does anyone know what I'm doing wrong. Interestingly, I can still see the data in the region.
jamestait wrote:
when I record, my previous track data keeps getting overwritten.
since you didn't specify, are you recording in a single take?
http://www.bulletsandbones.com/GB/GBFAQ.html#multipassrecording
(Let the page FULLY load. The link to your answer is at the top of your screen) -
I can't send email from my iPad. I am from Australia but on holidays in Greece. Does anyone know what is the smtp outserver for Greece that I should use?
As you haven't told us who your email provider is, no.
There isn't an SMTP server for Greece - it is either provided by your email provider, or the Internet provider you are connected through.
Maybe you are looking for
-
OS 10.6.8 Safari 5.1.1 I no longer have access to the bookmark folders. There is just a search function that does not work well. Is there any way to get access back to my bookmark folders?
-
ORA-04088: error during execution of trigger
Error Description : We have more than 100 of records in a csv file which we are processing through a script. At the first execution let say it generates trigger exception for five records ... when I execute the script second time those five records a
-
Trouble with a If conditional using string methods.
Hello Everyone, I am having trouble with an If statement. I want to compare a string variable to two values using the or operator. I have found the || may not be applied to string.equals. Would neone happen to have a different method? Code below: che
-
I did some searching on the forum and figured out how to find the file size of individual articles inside a folio (Acrobat.com), but I can't figure out a way to check the entire folio size (all articles added together). Is there a way to do this shor
-
Problem of configuration the requirement output control ?
Hi , i am now in a very urgent situation that is the system does not create the message type after executing the transaction VL31N. In detail : I have used the transaction NACE to configure the "Requirements output control" and i have created 3 me