Does anyone know what the partitions look like after installing boot camp on a 3T fusion drive
I installed a boot camp partition on a 3T fusion drive. Running disk utility afterward it looks like this.
Is this what it should look like? I understand about the need for bootcamp to create 2 physical drives in core storage in order to install boot camp on a 3T fusion drive but should I see both drives after it is done?
Similar Messages
-
Iphone6 doesn't play music (have tried obvious things like volume etc and plugged in headphones, connected to a speaker via bluetooth, and tried to play from the inbuilt speaker). Does anyone know what the problem is and how it can be resolved?
You can't buy the part from Creative as a spare.
I'm not sure how compatible other parts might be, but that would be a question for someone who really knows a lot about this area of electronics.
The Creative repair for this is likely to be expensi've, but the problem is most likely a broken solder connection than an actual new headphone socket. So if you know someone experienced in surface mount soldering you could probably get it repaired just with this. -
I have a 13" macbook from 2009 and for some reason can no longer change my desktop image by just clicking on an image in system prererences>I-Photo. Does anyone know what the problem could be?
Your Desktop Picture settings and Dock items are stored in the files
/Users/your short user name/Library/Preferences/com.apple.desktop.plist and
/Users/your short user name/Library/Preferences/com.apple.dock.plist
in the "Preferences" folder in your user library. This looks like the system has trouble to write to these files. Check the permissions on your user library and remove the above files from your user library, then log off and on again.
Your user library is hidden in Lion and Mt. Lion. To reveal it, use the Finder's "Go" menu. Select "Go" in the Finder's main menu bar and hold down the alt/option key, until you see the "Library" in the drop-down menu. Double click it to open a Finder window, so you can browse the files inside.
Regards
Léonie -
Does anyone know what the "Provision Failure: MEDIATION-5, Lrad! errors are in WCS
Does anyone know what the "Provision Failure: MEDIATION-5, Lrad! errors are in WCS?
I get this when pushing an AP template to six new 3502i series access points. The error reads like this:
*** Apply Result for AP 'NameOfAPhere(C0:FF:EE:C0:F:EE)' ***
**AP Parameters**
Provision Failure: MEDIATION-5, Lrad!C0:FF:EE:C0:F:EE,secondaryMwar,No access
MAC address has been changes to protect the names of the innocent...
The rest of the template appears to push. The 802.11a/n and 802.11b/g/n parameters show "success".
Anyone have the magic decoder ring for what these messages are referring to so that I can go fix the issue?
Thanks in adavance!Hi,
Two things :
1- Can you refresh configs from WLC to WCS and then give it a try ?
2- Is WCS using the right read-write community string for this WLC ?
(Since we see a "No Access" message in the error)
Thanks..Salil -
With the new iOS 7 update. Does anyone know what the setting "Bold Text" means or will do? Obviously I do know what Bold Text is. It says if you click on this, it says it will restart your iPhone. Before I do this, I'm just wanting to be sure I know what's going to happen.
Thanks,
-LeeIt just reboots the device and bolds the system fonts. No harm done. If you don't like it, undo the setting, it will reboot and back to as it was.
-
IPhone 5 screen is black, when I connect to ITunes it says "to allow access please respond to your Iphone". Impossible with a black screen, does anyone know what the prompt is?
Hey 11doski,
Thanks for the question. After reviewing your post, it sounds like the display has a dark screen. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
iPhone: Hardware troubleshooting
Display has no backlight or dark screen
Toggle the ringer switch to see if the unit vibrates. If it does, it could be that iPhone is getting power, but is not displaying any image.
Try turning iPhone off and then on again.
While connected to the iPhone charger, try to reset the iPhone.
If the low-battery screen appears, charge the iPhone.
Thanks for using Apple Support Communities.
Have a nice day,
Mario -
I have an .avi file Quicktime is refusing to play, yet the information says Quicktime does play .avi files. Does anyone know what the problem is?
AVI is a legacy file container originated by Microsoft back in 1992 and which has not been officially supported for more than a decade. Like the container, many of the codecs commonly used to create AVI content are also "legacy" compression formats most often supported on PC/Windows platforms. In fact, some codecs have never been transcoded for Mac use. Of those that have, many never made the transition to Mac OS X or the transition to Intel-based platforms. Those codecs that are still supported on the Mac can normally be found in the avi to quicktime converter available as an online download. While some common AVI compression formats may be supported by the QT X Player app, QT 7 currently provides a more compatible AVI playback environment for most "legacy" compression formats. If the codec(s) used in your AVI files are not supported by the avi to quicktime converter for QT use, you can try the VLC media player which may still support more esoteric compression formats. If VLC does not support the files, the normal approach is to discover which specific audio and/or video codecs were used to create the file and perform an Internet search to see if a compatible Mac component is available for download.
-
Hiya, I've got a weird problem with my iPhone4. On the 'home page' of my iPhone the mail symbol tells me there's a new mail waiting for me. However, there's no new mail to be found. Does anyone know what the problem is? Thanks
This response is a little late as I just read about your problem. I have a 2012 Dodge Charger and a 2012 Chrysler Town and Country and both worked flawlessly with the iPhone 5s my wife and I had. However, we just upgraded to the iPhone 6 and Uconnect will receive calls but you cannot answer them. You can callout successfully, however. the annoyance being the inability to answer incoming calls in the HandsFree mode.
-
On my Mac Mini, I keep getting this error message: "iCloud encountered an error while trying to connect to the server". I don't have any problems with iCloud on my laptop / PC. It works fine... Does anyone know what the problem could be?
Your Mac must be on Lion (10.7) to run iCloud. Apple had to change the operating system to fully support it. Nevertheless, it is possible to get emails from iCloud without having Lion. Please tell me if this interests you.
Anyways, here is the link to buy Lion (30 dollars, totally worth the upgrade ): http://itunes.apple.com/be/app/os-x-lion/id444303913?mt=12
Franklin -
Does anyone know what the black rectangle about the receiver on the 4S is for? I want to put a screen cover on my phone but don't know if that should be covered or not.
Refer to this article under section 4: Verify that the Apple Mobile Device USB Driver is installed
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538 -
Just downloaded new verion of ITunes, now when I try to open ITunes get This copy is corrupted or is not installed correctly. Please reinstall ITunes. Running XP. I do not want to lose everything I already have on ITunes.Does anyone know what the solution might be?
Hi, oldcrow13.
Thank you for the response. Typically this error is caused by installing an older verison of iTunes than you had prior. When you installed iTunes did you download the program directly from iTunes.com, or did you use an older copy of the program on your computer? If you used an older version or are unsure, uninstall all the components one more time and download a new copy of iTunes via the link below.
iTunes for Windows
http://www.apple.com/itunes/?cid=OAS-US-DOMAINS-itunes.com
Jason H. -
Outlook 2007 doesn't show the icloud service running in Windows 7 within outlook. Does anyone know what the dll for this service is so it can be manually added to outlook? I've installed the icloud control panel app and set it up to synch everything, but after initially downloading my icloud calendar, it won't process any calendar updates (new entries made on either iphone 4 on ios 5 or outlook).
So since the control panel installed, but the service doesn't show running in outlooks "trust center" add-ins list, anyone know the actual dll file it would point to so I can see if I can add it the hard way?I had the same issue and figured it out. First you have to start Outook as administrator. To do this, shift and right-click on outlook and click run as administrator. Next you need to enable Hard-disabled add-ins:
Hard-Disabled Add-Ins
Hard disabling can occur when an add-in causes the application to close unexpectedly. It might also occur on your development computer if you stop the debugger while the Startup event handler in your add-in is executing.
To re-enable an add-in
In the application, click the File tab.
Click the ApplicationName Options button.
In the categories pane, click Add-ins.
In the details pane, verify that the add-in appears in the Disabled Application Add-ins list. The Name column specifies the name of the assembly, and the Location column specifies the full path of the application manifest.
In the Manage box, click Disabled Items, and then click Go.
Select the add-in and click Enable.
Click Close.
Then you need to activate it.
To re-enable an add-in
In the application, click the File tab.
Click the ApplicationName Options button.
In the categories pane, click Add-ins.
In the details pane, verify that the add-in appears in the Inactive Application Add-ins list. The Name column specifies the name of the assembly, and the Location column specifies the full path of the application manifest.
In the Manage box, click COM Add-ins, and then click Go.
In the COM Add-Ins dialog box, select the check box next to the disabled add-in.
Click OK. -
One button on the logic board of a 1st generation iMac G5 (PPC) is an alternate power button. Does anyone know what the purpose of the other button is?
I am far from certain but I believe it is the power management unit (PMU) reset switch a/k/a Cuda switch: http://support.apple.com/kb/HT1939
Do not press it when the computer is on. -
Does anyone know what the default font is for MacMail?
Does anyone know what the default font is for the Mail program? My son changed my mail font and I want to change it back, but I can't remember what the original default is! Anyone? Thanks!
I rarely use Mail (normally use Gmail in Safari) so I am 99.99% sure mine is still at the default. It is Helvetica 12.
-
Does anyone know what the download size is for iOS 7.0.3?
Does anyone know what the download size is for iOS 7.0.3?
It depends on your device. For my devices it ranged from 1.1 - 1.3GB.
Maybe you are looking for
-
How to change date for Compensation Package Offer (IT0706)
I try to change date for an existing record in IT0706 to a later date, however system prompted "The compensation package was already activated. It can not be changed" As I checked, the record status is "Activated". Can anybody help to advice on how t
-
Does Boot camp restrict the hardware at all?
I'm just curious since I have a Windows 7 partition on my MBP solely for gaming purposes...But, it seems like the windows partition doesn't work as quickly as the mac side. I upgraded to 7 from XP since XP didn't recognize my full RAM. However, does
-
ICA driver for Canon MX512 scanner?
I've exhausted Canon Support, trying to get a Canon PIXMA MX512 multifunction printer/scanner/fax machine to work on my father-in-law's dual 2.0 GHz processorr PowerMac C5. They do have a printer driver, downliaded from their website, that allows it
-
Coding a FTP-client with a special feature
Hi! I have a project in school where we are supposed to pick our own project that we code in java, and it has to be involved around networking. So I thought to myself that I should try to code a basic ftp client. This I don't see as a problem since t
-
Itunes: Can I use multiple folder locations if my primary location is an external drive?
I recently moved all my music to an external drive. Now I want to have some music back in my Itunes folder so that I can listen to my music when I'm not near my external drive. Is there a simple solution?