Does aperture 2.1 library need to be on the system partition ??

Hi !
Does aperture 2.1 library need to be on the system partition ??
Aperture library overfilled my system partition,
So I moved it to another partition by Aperture preferences.
Aperture sees where it is,
but wants to set up a new library,
I suppose on my full system partition.
Any suggestions are appreciated,
as you might guess,
I am new at Aperture.
Thanks for any interest and help.
Ken

No the Aperture Library does not need to be on the same partition with the System. It should, however, be on an internal or eSATA-connected drive.
Generally partitioning is a waste of spce. Please describe your exact setup of hard drives and partitions.
What most folks really should have is a Referenced-Masters Library, which deals with the issue of overfilling drives.
-Allen

Similar Messages

HT204414 does the system library need to be on the primary hard drive or can it be on my external hard drive and still be able to use the cloud?

does the system library need to be on the primary hard drive or can it be on my external hard drive and still be able to use the cloud?

I have the system Library on a second internal drive and it is syncing with iCloud with no problems. Also the Media Browser it seeing it there.
Only make sure, your external drive is directly connected and correctly formatted MacOS Extended (Journaled).

What does this mean? What should I do? The system extension "//System/Library/Extensions/AppleUSBEthernetHost.kext" was installed improperly and cannot be used. Please try reinstalling it, or contact the product's vendor for an update.

What does this mean? What should I do?
The system extension “//System/Library/Extensions/AppleUSBEthernetHost.kext” was installed improperly and cannot be used. Please try reinstalling it, or contact the product’s vendor for an update.

You don't even have to type more than 8 letters:

[svn] 2700: With the Marshal Plan, when create an instance of a manager, we need to talk to the system manager.

Revision: 2700
Author: [email protected]
Date: 2008-07-31 21:12:03 -0700 (Thu, 31 Jul 2008)
Log Message:
With the Marshal Plan, when create an instance of a manager, we need to talk to the system manager. Unfortunately sometimes these manager instances can be created before the Application class is created and/or before the systemManager property is set on the application. So to get the reference to the system manager from the manager instances, we can't use ApplicationGlobals.application.systemManager. We need to use SystemManagerGlobals.topLevelSystemManagers[0] instead. This property is set in the SystemManager constructor, and fortunately for us, Flash runs your root display object's constructor before anything else, even before static initializers (atleast ones not defined in SystemManager or a dependency of it).
QE: Yes
Doc: No
Bugs: SDK-16207, SDK-16208, SDK-16209
Reviewer: Alex
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-16207
http://bugs.adobe.com/jira/browse/SDK-16208
http://bugs.adobe.com/jira/browse/SDK-16209
Modified Paths:
flex/sdk/branches/3.0.x/frameworks/projects/framework/src/mx/managers/CursorManagerImpl.a s
flex/sdk/branches/3.0.x/frameworks/projects/framework/src/mx/managers/ToolTipManagerImpl. as

an instance p for Point class is created like this?
Instead we can create and instance of Point class
as:
Point p = new Point();
Can any one of you explain this?Your Point() constructor doesn't throw exceptions, so there's no need to catch them. The Class.forName() and Class.getInstance() methods can throw exceptions, so it's necessary to handle them if they arise. Check out the docs for those methods, it lists what exceptions they can throw.
http://java.sun.com/j2se/1.5.0/docs/api/java/lang/Class.html#forName(java.lang.String)
http://java.sun.com/j2se/1.5.0/docs/api/java/lang/Class.html#newInstance()
2) In the above Class Point what is the use of
creating an instance of Point with in that Point
class?
static Point origin = new Point(0,0);
What the reason to create an instance like this
within the same class. We can create this instance of
point
class when ever we need. There doesn't seem to be any in your code, since that variable is never accessed. It could be useful if you wanted to have a Point that was shared across all instances. This is not a good example of that though.

Need report to list the system name, client status, client version, OU name info for a particular collection of systems

Hi Friends,
Need report to list the system name, client status, client version, OU name info for a particular collection of systems.
Please help as it would be appreciated much as i am not familiar with creating custom reports in SCCM. Thanks.
Regards,
Thangaraj

Select v_R_System.Name0, v_R_System.Client_Version0, v_RA_System_SystemOUName.System_OU_Name0,
case when v_R_System.Client0 = '1' then 'Client is Installed'
else 'Client Not Installed'
end as 'Client Status'
FROM v_R_System JOIN v_RA_System_SystemOUName ON v_R_System.ResourceID = v_RA_System_SystemOUName.ResourceID WHERE System_OU_Name0 LIKE '%HR'
John Marcum | Microsoft MVP - Enterprise Client Management
My blog: System Center Admin | Twitter:
@SCCM_Marcum | Linkedin:
John Marcum

Why does my ipod nano now need a 10.5.8 system.

I got my 4th generation ipod nano 2 years ago, and now it is not recognized on my mac 10.4.11, though it does charge up when connected. I followed all the steps in the troubleshooting manual on the apple site for this problem. I was told to get the latest update of itunes, but that update has system specifications that require 10.5.8 or later. Is Apple trying to force me to replace my perfectly fine 10.4 in order to use my ipod properly? How can I continue to use the ipod apple sold me?

The IPod does not appear on my desktop at all. I've tried both USB ports and 2 different cables. I tried resetting while connected and yes, I did try placing it in disk mode. It fails at step 5:
"5. When the Apple logo appears, release the Menu and Select buttons and immediately press and hold the Select and the Play/Pause buttons until the Disk Mode screen appears."
The apple logo appears, but when I hold down the select button and the play/pause button, the disk mode screen does not appear. All that happens is that the ipod turns on. I've tried all the steps, including the flat surface and different hands. It just won't work.

Aperture 3.1 - Love Full Screen Mode, Hate The System Lock-Ups

Hi Guys,
I don't know if I'm the only person encountering this issue but Aperture 3 is driving me nuts. While I absolutely love the program and the full-screen mode, what I hate is the frequent lock-ups that force me to completely restart my iMac. Having the application lock-up is highly annoying but at least in "normal" mode I could kill the application from the Dock or Activity Monitor. However, when I'm operating in full-screen mode then I can't switch out of the application and seem to have no option but to completely restart my computer. This problem, which I first started experiencing with version 3.0 but which does seem to have been addressed in version 3.1, is happening so often that I'm afraid now to even use full-screen mode.
This problem only, to my memory, seems to happen when making adjustments but it does not seem to matter which adjustment. In the most recent occurrence the lock-up happened when I cancelled the application of a Crop by clicking the X icon on the Crop HUD.
Does anyone know either a) what might be causing the lock-ups, or b) how I can kill Aperture without having to completely restart my computer?

You could also set up SPACES to see if that works when lock up occurs in full screen
Apple Icon > System Preference > Desktop & Screen Saver > Hot corners
I have bottom left set to spaces
Then drop the mouse to bottom left, 4 windows appear, drag aperture to a seperate window and run there, you desktop is in a different space and can be accessed by bottom left of screen mouse movement (if the mouse works when A3 locks up)

One Library for all users on the system - Sharing?

Hello.
I'm using iTunes 9.0.3 on OS X 10.6.2. On this system, there are TWO users, one for my wife, one for me. I'd like to "merge" the seperate iTunes libraries, so that there's only one shared library for all users.
How could this be achieved?
Searching the web, I found a writeup on [dougscripts.com by Paul Whitey|http://dougscripts.com/itunes/itinfo/sharedlib.php], which basically explains to move ~/Music/iTunes to /Users/Shared/iTunes and making sure that there's an alias in ~/Music pointing to /Users/Shared/iTunes. It also explains, that the ownership of the files & folders is to be changed so, that all users have read & write access. This then looks like this on my system:
!http://img214.imageshack.us/img214/6223/fileinfowithbothusersha.png!
-> http://yfrog.com/5yfileinfowithbothusershap
It works good - both "alex" and "sandra" can work with these files (ie. move them, rename them, change ID3 tags).
But see those:
!http://img714.imageshack.us/img714/2183/fileinfowithonlyalexhav.png! !http://img686.imageshack.us/img686/7807/fileinfowithonlysandra4.png!
--> http://yfrog.com/jufileinfowithonlyalexhavp & http://yfrog.com/j2fileinfowithonlysandra4p
That's from files which sandra or alex have added later on. Only the one who added these files can modify them (which is of course correct, if you have a look at the file permissions).
How would you go about having only ONE iTunes database on the system? Simply putting the iTunes Db on a shared folder doesn't work well, as can be seen above. Always having to fiddle around with the file permissions isn't exactly comfortable…
Any suggestions?
Thanks,
Alex

Hm. PowerTunes crashs, when I make it Share my library. I pasted the crash report at http://pbox.ca/13gwy
Since I cannot know how/if would work (because of the crash…), please correct me if I'm wrong, but wouldn't it also just move the files to /Users/Shared and set permissions correctly? Wouldn't I need to keep on running PowerTunes from time to time, or is it "run once and forget" application (if it works)?

Hi there, I just signed up and put in all my information and when I got to the end it said we can't process your request at this time. Does that mean it didn't work or that the system is down right now?

Hello
I just signed up to start downloading music on my ipod and when I got to the end it said can't process now. Does that mean that the system is down or will I need to do this all over again?> Thank you

If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Devices list, and then click Restore.

None of the fonts from /Library/Fonts show up in the system! :-/

Hello all!
I have a very weird issue on 10.4.8 (Intel).
For some reason, none of the standard system fonts that reside in /Library/Fonts show up anymore. Neither in the system-wide font selector, nor in Font Book. Stuff in ~/Library/Fonts and /System/Library/Fonts is what's only left.
If I open a document in Pages it will say the fonts I used are missing. Likewise all web sites are displayed with Helvetica...
I tried removing all user fonts, re-logging in, re-booting - doesn't help... Any ideas what it may be?
Thanks for any help,
Artemiy.

Very strange! If you start up and as soon as you hear the chime press and hold the Shift key. When you see the splash screen with "Safe Mode" release the Shift key. A Safe Boot takes longer as the system repairs the disk, tosses font caches, and disables all third party startup items (and some Apple ones). After it boots try your programs and see if they now see the fonts. If so it may be there was a corrupt cache. Restart normally and see if everything is still OK.
Francine
Francine
Schwieder

Why does my ipod music library need restoring several times a day?

I recently updated my ipod touch to the newest software and the whole music library was removed and restored from backup, this did not seem to be a concern until later on that day my library was wiped clean, the ipod was not connected to the comuter while the songs were wiped, i just tapped the music app and it said that my library was empty.
This is very annoying as every time this happens i need to restore my ipod which can take a couple of hours, please help!

Sounds like the 'genius' wasn't much of a genius. There are many people that run/jog with their iPod with no problems. I've dropped mine off a table onto a hardwood floor and had no problems. Sounds like you have a lemon. If you recently purchased it, I would look into exchanging it.

Does a wrapper html file need to be in the same directory? Need advice

I'm doing some RnD experiments for an upcoming project and I would like to use Edge.
What I'm trying to do is load 2 different compsites in a wrapper.html file that is level above the compsites. For instance my setup is
project/wrapper.html
project/product1/product1.html
project/product2/product2.html
In my wrapper file I have this, but this doesn't work
<!DOCTYPE html>
<html>
<head>
    <meta http-equiv="Content-Type" content="text/html; charset=utf-8">
    <meta http-equiv="X-UA-Compatible" content="IE=Edge"/>
    <title>Untitled</title>

    <script type="text/javascript" charset="utf-8" src="product1/product1_edgePreload.js"></script>
    <style>
        .edgeLoad-EDGE-68005601 { visibility:hidden; }
    </style>

</head>
<body style="margin:0;padding:0;">
    <div id="Stage" class="EDGE-68005601">
    </div>
</body>
</html>
But when I move the wrapper.html file into the same directory as product1 and modify .js path and it loads fine? So my question is how do people normally load multiple compsites that resided in a different directory? What is the best method for accomplishing this? If anyone can point me in the right direction please. Thanks in advance.

You will need to update the new loction for even the product1_edge.js file and the product1_edgeActions.js file in the product1_edgePreload.js file.
Open up the product1.edgePreload.js file.
Search for 'aloader'.
Under this there should be a ' load: "product1_edge.js" ' change it to ' load: "product1/product1_edge.js" '
and do the same for product1_edgeActions.js file too.
Bascially when you update the location of the edge preload file you will have to update the location of the animate assets like the edge file,edge actions,images etc.All these file locations work relative to the html file loading them.

When I go to the apple store to exchange it, what do I say and do? Does my iPod touch gen5 need to be in the casing and all that when I give it?

Yeah reply a.s.a.p
All I have is the original packaging the iPod came with. Do I bring that or do I just bring the broken iPod touch gen5
But what do I say?

All Apple wants is the iPod itself, if that's all you're having problems with. They will not need the packaging, nor any of the accessories unless you're having problems with any of them. As to "what you say", you'll tell them what the problem is.
Regards.

Does an external cnt file need to be in the same folder as the master cnt file?

I'm working in RoboHelp Word and have inserted two external
cnt files into a master cnt file. I've selected the option 'use
full path' as the external help file is installed under a different
folder than the master help file. However, I am unable to view the
extneral cnt file from the master cnt file, unless all cnt and hlp
files are installed in the same folder. Is it not possible to have
the external cnt files under a different folder? Thanks for any
assistance!

Hi, SSchwa, and welcome,
I believe that you can keep the files in different folders
provided that they are in the help "search path". The following is
from Microsoft's WinHelp Author's Guide:
quote:
WinHelp now searches for Help files in the following
locations, in the order listed.
* If a path is specified, WinHelp first searches for the file
in the specified path. If the file is not found, the path is
removed and the following locations are searched.
* The folder of the current Help file.
* The current folder.
* The System subfolder of the Windows folder.
* The Windows folder.
* The folders listed in the PATH environment.
* The location specified in the Winhelp.ini file.
* The registry.
If WinHelp cannot find a Help file, it displays a dialog box
that enables the user to specify the location of the Help file. If
the users finds the file, WinHelp will add the location information
in the registry.
As far as registering the .hlp and .cnt files is
concerned, the registry key under which to do so is:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Help
Pete

The server was unable to load the SSL provider library needed to log in

Hello All,
When I am trying to login to my default SQL 2008R2 SP2 instance in windows 2003 server via ssms, I am getting the below error
A connection was successfully established with the server, but then an error occurred during the pre-login handshake. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.) (.Net SqlClient Data Provider)
When I looked into the error log and i could see lot of these messages.
The server was unable to load the SSL provider library needed to log in; the connection has been closed. SSL is used to encrypt either the login sequence or all communications, depending on how the administrator has configured the server. See Books
Online for information on this error message: 14 Not enough storage is available to complete this operation.
Force protocol encryption is set to off.
I am not sure what is the underlying problem. server's total RAM is 4 Gb and max_server_memory is set to 2 GB. CPU utilization is very normal at the time of issue.
I restarted the SQL service and i am able to connect to the instance, but the issue is repeating and i need to find a permanent fix.
Thanks

I could also see the below in error log some time before i get the above alert
Error: 701, Severity: 17, State: 123.
There is insufficient system memory in resource pool 'internal' to run this query
then after sometime flurry of alerts
The server was unable to load the SSL provider library
needed to log in; the connection has been closed. SSL is used to encrypt either the login sequence or all communications, depending on how the administrator has configured the server. See Books Online for information on this error message: 14 Not enough storage
is available to complete this operation.
Thanks

Does aperture 2.1 library need to be on the system partition ??

Similar Messages

Maybe you are looking for