Does DML error logging work only on local DB and not remote DB?

(A) does not log the errors but (B) does log the errors.
Does the LOG clause work only on a local database and not a remote database?
A)
begin
INSERT
INTO
"PRISM"."TARGET"@"DBLINK"
(INVOICE_NUM
,INVOICE_AMOUNT)
VALUES
('GHI'
,'GI')
LOG ERRORS INTO "PRISM"."ERR$_TARGET"@"DBLINK" (1000) REJECT LIMIT unlimited
end;
B)
begin
INSERT
INTO
"PEER_TARGET"
("INVOICE_NUM",
"INVOICE_AMOUNT")
VALUES
('GHI'
,'GI')
LOG ERRORS INTO "ERR$_PEER_TARGET" (1000) REJECT LIMIT unlimited
end;

Oracle has come back to us saying that
"DML error logging feature is not supported for distributed DML."

Similar Messages

  • Why GWt suggest box is not working in the latest versions of Firefox ? It was working only in Firefox 3 and not other versions. could you please assist in this regards.,

    Why GWt suggest box is not working in the latest versions of Firefox ?
    It was working only in Firefox 3 and not other versions. could you please assist in this regards.,

    jbren wrote:
    I repeatedly have problems with playback on my STB's. Go thru all the motions, inhouse agent, fix multi room dvr problems. Unplug unit, unplug dvr, etc. etc. etc.  The DVR'd show will play on the DVR but not on the STB's. What's up with that?
    Sorry to hear the auto fix suggested early did not fix your problem. So we can get more information from you, I have copied your post to our private support board. Please refer all correspondences to there from here on out. You can easily get to the private support one of two ways. In the email you signed up for the forums with, you will receive a link to click on. Make sure you are already signed into the forums before clicking on this link. Another way of getting there is by clicking on your username anywhere you see it in the forums. This brings you to your account profile. Scroll down to the section labeled "My Support Cases" . In there you will see the link to your case.
    Anthony_VZ
    **If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
    Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

  • Shell authorization works only on vty lines and not on console

    Why does command authorization only works for the vty line and NOT for the consoles?
    I use ACS for Win 3.3.(1)
    any input are very welcome
    Configuration
    aaa new-model
    aaa authentication login VTY group tacacs+ local
    aaa authentication login CONSOLE group tacacs+ local
    aaa authentication enable default group tacacs+ enable
    aaa authorization exec default group tacacs+ none
    aaa authorization commands 15 default group tacacs+ none
    line con 0
    login authentication CONSOLE
    line vty 0 4
    login authentication VTY

    By default, console authorization is turned off, even with all the standard authorization commands in your configuration. This was done deliberately to leave the console connection as a "back door" to get into the router in case you lock yourself out (which is easy to do with authorization). The theory is that if someone has access to your console port, you have a lot more to worry about than command authorization :-)
    If you really, really want to do this, make sure it works fine first on the VTY's, and then issue the hidden command:
    aaa authorization console

  • PerfView : Does source code lookup always shows time-based-indicators and not size-based?

    Hi,
        I've two questions on "source code look-up feature" - this is one of the highlighting features from PerfView (thank you for that).
    1) I've created ETL aiming only at managed memory pressure analysis (that is by deselecting all other options except => ".NET", "GC Only", ".NET SampAlloc")
          >> Now if I go to source code look-up from "GC Heap Alloc Stacks" it navigates to the code and shows an indicator (for example "105.7K|") does this mean => CPU time spent here -or- Total memory
    consumed from here?
    2) Currently "source code look-up feature" works only for .etl file and not for .gcDump, is there a way to make it working for .gcDump also with properly configured symbol paths? (I mean without creating .etl files).
          [this would really help me avoiding time & space for ETL in cases where I'm interested only in "gcDump"].
    --gopalan

    Sorry but I forgot to say, that I selected ITSMobile as the template generator. Everything works like a charm when I use the WebGui template generator.
    So I can narrow down the problem: Does anyone know how to display itsmobile templates correct in an standalone ITS 6.20 28.
    Best regards.
    Markus

  • OWB 10gR2 Does not support DML Error Logging

    I've just had this confirmed by support.
    So Oracle's key ETL tool does not support 10gR2s key ETL feature DML Logging.
    So far set based loads on large volume databases you are going to find yourself being tripped over into row by row processing.
    I find this staggering.
    Has anyone else found this?

    Oracle has come back to us saying that
    "DML error logging feature is not supported for distributed DML."

  • DML Error logging with delete restrict

    Hi,
    I am trying to log all DML errors while performing ETL process. We encountered a problem in the process when one of the on delete cascade is missing in child tables but I was curious to know why we got that exception to the calling environment because we are logging all DML errors in err$_ tables. Our expectation is when we get child record found violation then that error will be logged into ERR$_ tables and process will carry on without any interruption but it interrupted in the middle and terminated. I can illustrate with below example
    T1 -> T2 -> T3
    T1 is parent and it is s root
    Create table t1 (id number primary key, id2 number);
    Create table t2(id number references t1(id) on delete cascade, id2 number);
    create table t3 (id number references t2(id)); -- Missing on delete cascade
    insert into t1 as select level, level from dual connect by level < 20;
    insert into t2 as select level, level from dual connect by level < 20;
    insert into t3 as select level from dual connect by level < 20;
    exec dbms_errlog(t1);
    exec dbms_errlog(t2);
    exec dbms_errlog(t3);
    delete from t1 where id = 1 log errors into err$_t1 reject limit unlimited;   -- Child record found violation due to t3 raised but I am expecting this error will be trapped in log tables.
    delete from t2 where id =1 log errors into err$_t2 reject limit unlimited; -- Got the same error child record violation. My expectation error will be logged into log tables.
    I am using Oracle 11gR2.
    Also, Please let me know if there is any restrictions to use DML error logging in DBMS_PARALLEL_EXECUTE.
    Please advise
    Thanks,
    Umakanth

    What is the error you want me to fix? Missing on delete cascade?
    The Code you posted has multiple syntax errors and can't possibly run. You should post code that actually works.
    My expectation is all the DML errors will be logged into error logging tables even if it is child record found violation.
    delete from t1 where id = 1 log errors into err$_t1 reject limit unlimited;  -- Child record found violation due to t3 raised but I am expecting this error will be trapped in log tables.
    delete from t2 where id =1 log errors into err$_t2 reject limit unlimited; -- Got the same error child record violation. My expectation error will be logged into log tables.
    DML error logging logs DATA. When you delete from T1 there is an error because the T2 child record can NOT be deleted. So the T1 row that was being deleted is logged into the T1 error log table. The request was to delete a T1 row so that is the only request that failed; the child rows in T2 and T3 will not be put into log tables.
    Same when you try to delete from T2. The T3 child record can NOT be deleted so the T2 row that was being deleted is logged into the T2 error log table.
    The exceptions that occur are NOT logged, only the data that the DML could not be performed on.
    After I fixed your code your example worked fine for me and logged into the DML error tables as expected. But I wasn't doing it from a client.

  • Use global temp table for DML error logging

    our database is 11.2.0.4 enterprise edition on solaris 10
    we are wondering if anyone has an opinion of or has done this before, to use a global temp table for DML error logging. We have a fairly busy transactional database with 2 hot tables for inserts. The regular error table created with dbms_errlog has caused many deadlocks which we don't quite understand yet. we have thought using global temp table for the purpose, and that seemed to work, but we can't read error from the GTT, the table is empty even reading from the same session as inserts. Does anyone have an idea why?
    Thanks

    The insert into the error logging table is done with a recursive transaction therefore it's private from your session which is doing the actual insert.
    Adapted from http://oracle-base.com/articles/10g/dml-error-logging-10gr2.php
    INSERT INTO dest
    SELECT *
    FROM  source
    LOG ERRORS INTO err$_dest ('INSERT') REJECT LIMIT UNLIMITED;
    99,998 rows inserted.
    select count(*) from dest;
      COUNT(*)
        99998
    SELECT *
    FROM  err$_dest
    WHERE  ora_err_tag$ = 'INSERT';
    1400    "ORA-01400: cannot insert NULL into ("E668983_DBA"."DEST"."CODE")"        I    INSERT    1000        Description for 1000
    1400    "ORA-01400: cannot insert NULL into ("E668983_DBA"."DEST"."CODE")"        I    INSERT    10000        Description for 10000
    1400    "ORA-01400: cannot insert NULL into ("E668983_DBA"."DEST"."CODE")"        I    INSERT    1000        Description for 1000
    1400    "ORA-01400: cannot insert NULL into ("E668983_DBA"."DEST"."CODE")"        I    INSERT    10000        Description for 10000
    rollback;
    select count(*) from dest;
      COUNT(*)
            0
    SELECT *
    FROM  err$_dest
    WHERE  ora_err_tag$ = 'INSERT';
    1400    "ORA-01400: cannot insert NULL into ("E668983_DBA"."DEST"."CODE")"        I    INSERT    1000        Description for 1000
    1400    "ORA-01400: cannot insert NULL into ("E668983_DBA"."DEST"."CODE")"        I    INSERT    10000        Description for 10000
    1400    "ORA-01400: cannot insert NULL into ("E668983_DBA"."DEST"."CODE")"        I    INSERT    1000        Description for 1000
    1400    "ORA-01400: cannot insert NULL into ("E668983_DBA"."DEST"."CODE")"        I    INSERT    10000        Description for 10000

  • ORA-02291 - ORA-02063 on merge with dml error logging through DB link

    Hello all,
    I have 2 DB's and I would like to merge records from A into B with dml error logging through a db link.
    Exemple:
    merge into [email protected]
    using (select ... from A where...)
    when matched then
    when not matched then
    log errors into err$_A reject limit unlimited;
    When I use this, and exception is thrown:
    ORA-02291: integrity constraint (B.constraint_name) violated - parent key not found
    ORA-02063: preceding line from dblink
    I've got no idea of what causes this.
    Could anyone please help me ?
    Thanks !
    Regards,
    TDE.

    Hello damorgan,
    Thanks for your answer.
    I've well understood that its was a foreign key violation, and I guess that's an error in the source: wee make only logical deletes, and I'm quite sure the problem is there.
    Anyway, I really would understand why dml error logging doesn't work in this case.
    I'll investigate and keep you informed.
    Regards.

  • DML Error Logging with multiple tables = OALL8

    I have a mapping that, via a splitter, loads 3 tables. This mapping works perfectly.
    Recently we upgraded to OWB 10.2.0.3 so we decided to make use of the new feature of DML error logging. So three error-tables where created and the "error table name" property of each table was entered. When re-creating this mapping in the database the following errors occur: "State of OALL8 is inconsistent", "No more data to read from Socket" (translated from dutch). When removing the value from the "error table name" property again, the mapping can be recreated again.
    What am I doing wrong? Have I run into a bug?

    Which database version are you using?
    Also not sure when exactly the error occurs, when you deploy the map...or when you execute the map? Can you describe as simple a scenario for it to fail that you can?
    I did find a bug 5942415 which was to do with this area..worth checking anyway.
    Cheers
    David

  • DML Error Logging for underlying tables autocreated for dimensions

    Hi,
    I have problems with logging errors during mapping for underlying tables that are automatically generated for creating dimensions. I know that DML Error Logging is supposed to work only on tables, views and materialized views, and I have tried it out using a pure table in a mapping without any reference to a dimension and specifying the error table name for it. This works perfectly. The error rows were captured correctly in the error table and the correct rows were also loaded successfully to the target table.
    However when it comes to mapping to a dimension, I have some issues with that. I specified the shadowtable name for the underlying table(right clicking on the table in design center and then choosing configure), and after deploying I did check that the error table/shadow table and also the target table were indeed created in the database.
    The problem lies now in the mapping because I am actually mapping to a dimension and not the underlying table the dimension references to. It seems that the mapping did not manage to capture details of the error table for the underlying table that the dimension was referencing to and thus were unable to capture the errors. Only the corrected rows get loaded and there were no error messages during the loading that suggests that the incorrect rows were detected.
    Would appreciate some assistance here.
    Thanks!
    WY

    Hi
    The DML error logging feature in 10gR2 and 11gR1 was restricted purely to tables, so the dimension operator did not support it. This is now supported in OWB 11gR2 (plus there is the orphan management functionality).
    Cheers
    David

  • Limitation on DML error logging

    Can someone please advise what is not supported by DML error logging which was introduced in Oracle 10g?
    one Oracle document says "You cannot track errors in the error logging table for LONG, LOB, or object type columns".
    One says only non-scalar columns, like datatime is not support.
    Another one says it doesn't support nested table.
    Anyone has a more complete list of limitation?
    Thanks!
    Edited by: user611482 on Feb 9, 2010 3:32 PM

    PLease read the following,
    http://download.oracle.com/docs/cd/B19306_01/server.102/b14231/tables.htm#sthref2234
    HTH
    Aman....

  • Dml error logging  - are exceptions redundant?

    Hi there
    Heard alot about dml error logging and looks good in practice.
    In a data warehouse environment and wish to make use of this in a pl/sql procedure - I'm thinking is the only exception I would neeed know something like
    when others
    then
    insert into error_table values(sqlcodes,sqlerrm);commit;
    raise;
    Another question as purely a background routine with no user interaction do we really need the raise - I know many posts talk about having ir or raise_application_error to alert user something went wrong but in purely batch procedures is this really necessary?
    Also what is the error_stack exactly and how can you query it?
    Any advice/thoughts?
    Many Thanks

    other question as purely a background routine with no
    user interaction do we really need the raise - I know
    many posts talk about having ir or
    raise_application_error to alert user something went
    wrong but in purely batch procedures is this really
    necessary?RAISE:
    there a discussion going on this issue:
    WHAT is the purpose of RAISE in an EXCEPTION clause ?
    RAISE_APPLICATION_ERROR
    this will report an error and will break out. Usually used to report errors while debugging.
    Regards

  • DML ERROR LOGGING STATEMENT FAILS FOR MULTITABLE INSERT

    When I use a simple expression in my dml error logging statement for a multitable insert I get 'end of file on communication channel' on the compile(in all guis tested). It works fine without the simple expression for the multitable insert. The simple expression works ok with a single table insert.
    example:
    this works ok for single table insert and blows up on multitable inserts:
    LOG ERRORS INTO ERR$_INVOICE (TO_CHAR(SYSDATE,'YYYYMMDD HH:MI:SS')) REJECT LIMIT UNLIMITED;
    this works ok for both:
    LOG ERRORS INTO ERR$_CINVOICE REJECT LIMIT UNLIMITED;
    any ideas?

    No version number, no DDl, and no DML. No help is possible.
    Complete version information and a demo that people can run to duplicate your situation will increase the chance of getting help.
    I, for example, have no idea what you intend with the statement multitable insert. Is this a reference to INSERT ALL or INSERT FIRST or some other syntax?

  • DML ERROR LOGGING - how to log 1 constraint violation on record

    Hi there
    We are using DML error logging to log records which violate constraints into an error table.
    The problem is when a record violates > 1 constraint it logs the record but details only 1 constraint violation - is there a way to get it to record all constraint violations on an individual record.
    Many Thanks

    In the Netherlands several years ago a framework called CDM RuleFrame was introduced that did just this. Their main thought was that it is desirable to collect all error messages from one transaction and display them all at the end of the transaction.
    [url http://www.dulcian.com/papers/ODTUG/2001/BR%20Symposium%202001/Boyd_BR.htm]Here is an article that explains the concept.
    In short: it involves coding every single business rule as a database trigger using transaction management of CDM RuleFrame.
    I would not recommend it however, because I think [url http://rwijk.blogspot.com/2007/09/database-triggers-are-evil.html]database triggers are evil. However, it may appeal to first time users of an application.
    Hope this helps.
    Regards,
    Rob.
    Message was edited by:
    Rob van Wijk
    But if cannot be "turned on" by some switch: you have to design your system this way. So the short answer to your question is: no, it is not possible.

  • Since moving to iCloud, my mobileme email works ONLY on my iPhone, but not on my PC with Outlook.  I get an error message indicating the authentication is not accepted.  any suggestions?

    since moving to iCloud, my mobileme email works ONLY on my iPhone, but not on my PC with Outlook.  I get an error message indicating the authentication is not accepted.

    To anyone who has viewed this post and is having similar difficulties, the answer came on a different forum: I dragged & dropped the files from Mail to iCloud Drive. Opened them on my MB Air, they were saved in Templates and are now accessible across all my devices.
    Answer came from SGIll: Numbers templateshttps://discussions.apple.com/message/27505880#27505880Numbers templates

Maybe you are looking for

  • Hyperlink in Drill-Through on BPC 7.5 M

    We used to have a hyperlink in our drill-through requests. Before migrating to BPC 7.5 MS from BPC 5.1, these links worked perfectly. Now, the result in the web browser and Excel is displayed as text instead of the link What can cause this problem? T

  • Lenovo DisplayPort to DVI adapter--is it active or passive??

    part number 43N9159  is it a passive or active adapter?? Solved! Go to Solution.

  • Log Miner is finding DDL for "new" tables, but also DML for "older" tables.

    oracle 10.2.0.5.0 Standard Edition (at some point in the past it was "downgraded" from enterprise edition). It's making me crazy,  i create a table then insert/update rows.  Log miner only shows me the create. However, if i do insert/update on an "ol

  • Using Tiger in jsp

    Hello, I use Tomcat 5.5 and I would like to use jdk5.0 features such as enhanced for loop in my jsp. I am having problems: Tomcat seems to be expecting jdk1.4 syntax. Can anyone help please? Julien.

  • Recurring Appointments in Outlook

    Hi There, iPhone 3G connected to UK 02 Network - v2.02 Firmware I have recurring appointments in Outlook which occur 3rd Tuesday in each month. Occasionally, these conflict with other meetings so we move them to later in the day. When I do this, it m