Does DPM 2012 R2 with rollup 2 support any version of Windows Server 2003/2008 on Hyper-V?

We have Hyper-V Hosts with VMs which include Windows 2003/2003R2/2008/2008R2.
If I we upgrade to DPM 2012 R2 Update Rollup 2, will we be able to backup all those VMs now? The support matrix (http://technet.microsoft.com/en-us/library/jj860400.aspx)
still seems to show what is supported by the initial release of DPM 2012 R2, not an updated version for the rollup.
We currently use DPM 2012 SP1 and Hyper-V hosts using Server 2012.

Hi,
This is kind of a loaded question because DPM 2012 R2 never dropped support for protecting Windows 2003/2008 using host level backup.
However, the support matrix will be updated shortly to include the added support for protecting workloads on Windows 2003 / 2008 using DPM 2012 R2 UR2.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

Similar Messages

Which version of Windows Server 2003 to use with G6?

Anyone know any pros and/or cons of using different versions of Windows 2003 Server? i.e., any benefits or detriments of using Standard vs Enterprise vs. Web vs. the Datacenter versions?

On which version of Vista you should choose will depend on what you want to use Windows Vista for.
The Home Basic will work fine, but if you need to join a Domain (on a Windows Network) then the Business Edition is necessary, likewise if you want Media Centre then you need Home Premium, or if you need both of the previous two then Home Ultimate... etc....
All will work with Vista, which one is right for you will depend on how you need to use Windows.
http://www.microsoft.com/windows/products/windowsvista/editions/choose.mspx
iFelix

Surely It cannot be this hard! DPM 2012 R2 with Update rollup 2

I am close to giving up!
New to DPM but very experienced with networking/servers.
I installed DPM 2012 R2 and then installed rollup 2
I launch the DPM console, add some storage and then go to install the agent on a server - it fails
I get the standard message. When I check on the server I tried to install to I can see that the dpm 2012 r2 agent coordinator service was installed and running and listening on port 5719 but there is no DPMRA service.
So I perform a manual installation using the correct version from Rollup 2 on the server to be protected. This goes OK and I return to the DPM server to add the protected server. Made sure services were running on both servers, checkerd RPC, WMI, DCOM settings
and all seems OK but when I try to add the protected server from the DPM console using the attach agent option it fails with error 370.
Followed the top 20 suggestions, configured firewall for all ports on both servers. Tried turning the firewall off and still will not install.
I have also tried using a Hyper-V server, a physical server and none will work which tends to point to an issue with the DPM server.
The thing that puzzles me is that after I perform a manual agent installation on the protected server this seems to knock out the dpm 2012 r2 agent coordinator service which is no longer listed under services wheras DPMRA is running. I expected both services
to be installed and running.
When I perform a NETSTAT -a after installing the remote agent I can see port 5718 is listening but not port 5719
If I go back a step and try a dpm 2012 r2 agent coordinator install via DPM console (as part of adding the protected server) it does install dpm 2012 r2 agent coordinator and it listens on port 5719 but the DPMRA agent software is not installed.
I have tried deinstalling both the DPM agent software on the protected server and have even reinstalled DPM 2012 R2 with Rollup 2 with no change
I have verified communications between the servers. Checked the DPM server is in the relevant groups. Am at a complete loss on what to do next - it should not be this hard.
Can someone confirm to me that they expect both the dpm 2012 r2 agent coordinator service running on 5719 and the DPMRA service to be running on 5718 on the protected server which is what I assume but this
is not happening!
DPM server is a physical box running Server 2012. Protected server is a Physical box running Server 2012 R2. I have also tried with a physical server 2008R2 with the same results. I am not running Server 2003
prd

After 3 long days trying everything I could think of and following all of the excellent guidance out there ( thanks guys) I have a workaround.
The answer was to make the dpm server computer account a member of the domain admins group.
After I restarted the DPM server I saw that although the protected server account was still in error - the error message changed from 270 to 316.
So I then add the protected server computer account to the domain admins group
After I restarted the computers I could see the magic OK in the status of the DPM console.
As an experiment I removed the protected servers computer account from domain admins and restarted the server. After the restart DPM could no longer communicate with error 316 again.
So I tried adding the DPM server computer account to the protected servers local administrators group but this did not work.
Deeply unhappy with making a computer account a member of domain admin group but it works.
The question is why? There is obviously a security permissions issue that does not affect domain admins.
I am running this on freshly built servers on a simple, single domain.
Microsoft you need to look into this.
prd

Use Windows Server 2003 or 2008 with BootCamp?Just want to run basic things

Hey, well I can get a copy of Microsoft Windows Server 2003 and 2008 with the DreamSpark program (as I am in college) for free. But my question is, is this a good idea to use with my MacBook Pro? I wasn't sure how well it'd work with Boot Camp, and all I'd want is to just run basic programs and/or games.
Is it a good idea? And does anyone have tutorials for how to install it?

Hi,
Windows Server 2003 and XP 64-bit share the same codebase and XP-64bit is not supported with BootCamp.
Windows Server 2008 and Vista 64-bit share the same codebase and Vista 64-bit is only supported with BootCamp on some Macs. See here: http://support.apple.com/kb/HT1846
For running 'basic' things with the Server versions, why not use one of the Virtualization apps like Parallels, VMWare Fusion or VirtualBox ?
http://www.parallels.com/products/desktop/
http://www.vmware.com/products/fusion/
http://www.virtualbox.org/
VirtualBox is open-source, so you don't have to pay for it.
Regards
Stefan

Windows Server 2003 and problem with SSL connection (TLS)

Hi,
We are forcing a problem with SLL/TLS connection on a machine Windows Server 2003 SP2.
We spent hours trying to solve it without any result.
SYMPTOMS
No SSL connection can be established in any application since last year, e.g.:
we cannot do any windows update, because there is a time verification over SSL on the windows update website (there is an error that the time is incorrect while it is up-to-date)
we cannot open any website in Internet Explorer over https
when we try to connect to the SQL Server (database SQL 2008 hosted on the same server) with Management Studio it fails with an error: "A connection
was successfully established with the server, but then an error occurred during the pre-login handshake.(provider: SSL Provider, error: 0 - Could not
contact LSA)(Microsoft SQL Server)"
in a custom applications which sends requests over https we receive an error: "Could not establish trust relationship for SSL/TLS secure channel"
Everything seems to point at some SSL problem somewhere deep inside Windows.
We installed several patches, but without any result.
Can anybody help?
Regards,
Dawid

Hi, thanks for answers,
- In IE both SSL2.0 and TLS1.0 are checked. We tried to disable TLS1.0 - with no results.
- In HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\Schannel both SSL2.0
and TLS1.0 are enabled. We also tried to dislable TLS1.0 on the Client side - with no resuts.
- In
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\SecurityProviders\SCHANNEL EventLogging is set to 3, so it should log warnings
and errors. But we cannot find any related logs in EventLog
Unfortunately we are still in the same place.

Does DPM 2012 R2 still needs DataSourceGroups.xml and MaxAllowedParallelBackups key when using Hyper-V VSS Software Writer to backup Server 2012 R2 Cluster

Hi,
Does DPM 2012 R2 still needs DataSourceGroups.xml and MaxAllowedParallelBackups key when using Hyper-V VSS Software Writer to backup Server 2012 R2 Hyper-V Cluster with CSV's? Can't find a clear answer somewhere.
Thanx for helping me out.
DJITS.

Configure CSV backups
If you are running Hyper-V on Windows Server 2008 R2 and you’re backing up multiple clusters with DPM, you need to ensure that only one backup uses the same CSV at any one time. To do this, follow the instructions in
Serialize virtual machine backups.
If you’re using software VSS with Hyper-V on Windows Server 2008 R2, do the following
Serialize virtual machine backups per node
Serialize virtual machine backups per CSV LUN
Have a nice day !!!

How to protect (take backups) SQL 2014 AAG databases from DPM 2012 R2 with RU2

We have just upgraded / replaced our SQL Server plattform in the following way:
SQL Servers:
3 Servers running Windows 2008 R2 + SQL Server 2012 CU9
Upgraded to SQL 2014 so the system databases were up to the latest level
Removed all AlwaysOn AAG, destroyed cluster etc
Then total reinstall of all servers with Windows 2012 R2 + fresh install of SQL 2014
Replaced the fresh system databases with the old upgraded databases
Upgraded SQL 2014 With CU2
Re-setup a New cluster and AlwaysOn. All SQL Servers are running fine
DPM 2012 R2 With RU2:
Removed all previous backups of both AAG, Bare Metal etc related to the old servers.
Uninstall the DPM agents
Reinstalled agents after the 3 new serves where ready
Added Bare Metal backup. Works fine.
Added SQL Server backup of databases not part of any AAGs. Works fine.
Then comes the problem: I try to add protection of the new AAG's in DPM. I can see the new cluster and the AAG's, but when I try expand each Group, nothing shows up. It takes around 20 sec or so after I try to expand.
Any clue about what can be wrong?
Per

Part 2
115C 1B84 07/14 02:06:50.519 61 neapplicationnamespace.cpp(500) [000000000126FA30] NORMAL ==>CNEApplicationNamespace::EnumerateChildren
115C 1B84 07/14 02:06:50.520 61 neapplicationnamespace.cpp(500) [000000000126FA30] NORMAL <--CNEApplicationNamespace::EnumerateChildren
115C 1B84 07/14 02:06:50.520 61 neapplicationnamespace.cpp(500) [0000000001275B40] NORMAL ==>CNEApplicationNamespace::EnumerateChildren
115C 1B84 07/14 02:06:50.520 61 neapplicationnamespace.cpp(1110) [0000000001275B40] NORMAL Failed to get size of [%SystemRoot%\Vss\Writers\*.xml]
115C 1B84 07/14 02:06:50.520 61 neapplicationnamespace.cpp(1059) [0000000001275B40] WARNING Failed: Hr: = [0x80070002] : Encountered Failure: : lVal : hr
115C 1B84 07/14 02:06:50.520 61 neapplicationnamespace.cpp(991) [0000000001275B40] WARNING Failed: Hr: = [0x80070002] : Encountered Failure: : lVal : GetFileSize(bstrFilespec, bstrPathDir, llFileSize)
115C 1B84 07/14 02:06:50.520 61 neapplicationnamespace.cpp(500) [0000000001275B40] NORMAL <--CNEApplicationNamespace::EnumerateChildren
115C 1B84 07/14 02:06:50.520 61 neapplicationnamespace.cpp(500) [00000000034BD250] NORMAL ==>CNEApplicationNamespace::EnumerateChildren
115C 1B84 07/14 02:06:50.521 61 neapplicationnamespace.cpp(1110) [00000000034BD250] NORMAL Failed to get size of [%SystemRoot%\System32\Prfc????.dat]
115C 1B84 07/14 02:06:50.521 61 neapplicationnamespace.cpp(1059) [00000000034BD250] WARNING Failed: Hr: = [0x80070002] : Encountered Failure: : lVal : hr
115C 1B84 07/14 02:06:50.521 61 neapplicationnamespace.cpp(991) [00000000034BD250] WARNING Failed: Hr: = [0x80070002] : Encountered Failure: : lVal : GetFileSize(bstrFilespec, bstrPathDir, llFileSize)
115C 1B84 07/14 02:06:50.521 61 neapplicationnamespace.cpp(1110) [00000000034BD250] NORMAL Failed to get size of [%SystemRoot%\System32\Prfd????.dat]
115C 1B84 07/14 02:06:50.521 61 neapplicationnamespace.cpp(1059) [00000000034BD250] WARNING Failed: Hr: = [0x80070002] : Encountered Failure: : lVal : hr
115C 1B84 07/14 02:06:50.521 61 neapplicationnamespace.cpp(991) [00000000034BD250] WARNING Failed: Hr: = [0x80070002] : Encountered Failure: : lVal : GetFileSize(bstrFilespec, bstrPathDir, llFileSize)
115C 1B84 07/14 02:06:50.521 61 neapplicationnamespace.cpp(1110) [00000000034BD250] NORMAL Failed to get size of [%SystemRoot%\System32\Prfh????.dat]
115C 1B84 07/14 02:06:50.521 61 neapplicationnamespace.cpp(1059) [00000000034BD250] WARNING Failed: Hr: = [0x80070002] : Encountered Failure: : lVal : hr
115C 1B84 07/14 02:06:50.521 61 neapplicationnamespace.cpp(991) [00000000034BD250] WARNING Failed: Hr: = [0x80070002] : Encountered Failure: : lVal : GetFileSize(bstrFilespec, bstrPathDir, llFileSize)
115C 1B84 07/14 02:06:50.521 61 neapplicationnamespace.cpp(1110) [00000000034BD250] NORMAL Failed to get size of [%SystemRoot%\System32\Prfi????.dat]
115C 1B84 07/14 02:06:50.521 61 neapplicationnamespace.cpp(1059) [00000000034BD250] WARNING Failed: Hr: = [0x80070002] : Encountered Failure: : lVal : hr
115C 1B84 07/14 02:06:50.521 61 neapplicationnamespace.cpp(991) [00000000034BD250] WARNING Failed: Hr: = [0x80070002] : Encountered Failure: : lVal : GetFileSize(bstrFilespec, bstrPathDir, llFileSize)
115C 1B84 07/14 02:06:50.521 61 neapplicationnamespace.cpp(500) [00000000034BD250] NORMAL <--CNEApplicationNamespace::EnumerateChildren
115C 1B84 07/14 02:06:50.521 61 neapplicationnamespace.cpp(500) [00000000034BD6D0] NORMAL ==>CNEApplicationNamespace::EnumerateChildren
115C 1B84 07/14 02:06:50.522 61 neapplicationnamespace.cpp(500) [00000000034BD6D0] NORMAL <--CNEApplicationNamespace::EnumerateChildren
115C 1B84 07/14 02:06:50.522 61 neapplicationnamespace.cpp(500) [00000000034BD820] NORMAL ==>CNEApplicationNamespace::EnumerateChildren
115C 1B84 07/14 02:06:50.530 61 neapplicationnamespace.cpp(500) [00000000034BD820] NORMAL <--CNEApplicationNamespace::EnumerateChildren
115C 1B84 07/14 02:06:50.530 61 neapplicationnamespace.cpp(500) [00000000034BE920] NORMAL ==>CNEApplicationNamespace::EnumerateChildren
115C 1B84 07/14 02:06:50.539 03 clusterutil.cpp(1147) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG1
115C 1B84 07/14 02:06:50.539 03 clusterutil.cpp(432) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for VirtualServerName
115C 1B84 07/14 02:06:50.542 03 clusterutil.cpp(1147) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG1
115C 1B84 07/14 02:06:50.542 03 clusterutil.cpp(432) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for InstanceName
115C 1B84 07/14 02:06:50.545 03 clusterutil.cpp(1147) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG2
115C 1B84 07/14 02:06:50.545 03 clusterutil.cpp(432) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for VirtualServerName
115C 1B84 07/14 02:06:50.547 03 clusterutil.cpp(1147) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG2
115C 1B84 07/14 02:06:50.547 03 clusterutil.cpp(432) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for InstanceName
115C 1B84 07/14 02:06:50.548 03 clusterutil.cpp(1147) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG3
115C 1B84 07/14 02:06:50.548 03 clusterutil.cpp(432) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for VirtualServerName
115C 1B84 07/14 02:06:50.549 03 clusterutil.cpp(1147) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG3
115C 1B84 07/14 02:06:50.549 03 clusterutil.cpp(432) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for InstanceName
115C 1B84 07/14 02:06:50.552 03 clusterutil.cpp(1147) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG4
115C 1B84 07/14 02:06:50.552 03 clusterutil.cpp(432) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for VirtualServerName
115C 1B84 07/14 02:06:50.555 03 clusterutil.cpp(1147) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG4
115C 1B84 07/14 02:06:50.555 03 clusterutil.cpp(432) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for InstanceName
115C 1B84 07/14 02:06:50.555 61 neapplicationnamespace.cpp(2250) [00000000034BE920] NORMAL InitializeSQLQueryHelper: SQL Query Helper is initialized to SQL Instance [SQL1234\TEST] from SQL Instance []
115C 1B84 07/14 02:06:50.573 61 neapplicationnamespace.cpp(2439) [00000000034BE920] NORMAL IsIncrementalAllowed --> countSimpleMode 1, countReadOnly 0, countLogShipPrimary 0
115C 1B84 07/14 02:06:50.581 03 clusterutil.cpp(1147) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG1
115C 1B84 07/14 02:06:50.581 03 clusterutil.cpp(432) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for VirtualServerName
115C 1B84 07/14 02:06:50.584 03 clusterutil.cpp(1147) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG1
115C 1B84 07/14 02:06:50.584 03 clusterutil.cpp(432) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for InstanceName
115C 1B84 07/14 02:06:50.587 03 clusterutil.cpp(1147) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG2
115C 1B84 07/14 02:06:50.587 03 clusterutil.cpp(432) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for VirtualServerName
115C 1B84 07/14 02:06:50.590 03 clusterutil.cpp(1147) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG2
115C 1B84 07/14 02:06:50.590 03 clusterutil.cpp(432) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for InstanceName
115C 1B84 07/14 02:06:50.591 03 clusterutil.cpp(1147) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG3
115C 1B84 07/14 02:06:50.591 03 clusterutil.cpp(432) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for VirtualServerName
115C 1B84 07/14 02:06:50.592 03 clusterutil.cpp(1147) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG3
115C 1B84 07/14 02:06:50.592 03 clusterutil.cpp(432) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for InstanceName
115C 1B84 07/14 02:06:50.594 03 clusterutil.cpp(1147) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG4
115C 1B84 07/14 02:06:50.594 03 clusterutil.cpp(432) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for VirtualServerName
115C 1B84 07/14 02:06:50.597 03 clusterutil.cpp(1147) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG4
115C 1B84 07/14 02:06:50.597 03 clusterutil.cpp(432) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for InstanceName
115C 1B84 07/14 02:06:50.598 61 neapplicationnamespace.cpp(2439) [00000000034BE920] NORMAL IsIncrementalAllowed --> countSimpleMode 0, countReadOnly 0, countLogShipPrimary 0
115C 1B84 07/14 02:06:50.606 03 clusterutil.cpp(1147) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG1
115C 1B84 07/14 02:06:50.606 03 clusterutil.cpp(432) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for VirtualServerName
115C 1B84 07/14 02:06:50.609 03 clusterutil.cpp(1147) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG1
115C 1B84 07/14 02:06:50.609 03 clusterutil.cpp(432) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for InstanceName
115C 1B84 07/14 02:06:50.612 03 clusterutil.cpp(1147) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG2
115C 1B84 07/14 02:06:50.612 03 clusterutil.cpp(432) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for VirtualServerName
115C 1B84 07/14 02:06:50.614 03 clusterutil.cpp(1147) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG2
115C 1B84 07/14 02:06:50.614 03 clusterutil.cpp(432) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for InstanceName
115C 1B84 07/14 02:06:50.615 03 clusterutil.cpp(1147) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG3
115C 1B84 07/14 02:06:50.615 03 clusterutil.cpp(432) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for VirtualServerName
115C 1B84 07/14 02:06:50.616 03 clusterutil.cpp(1147) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG3
115C 1B84 07/14 02:06:50.616 03 clusterutil.cpp(432) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for InstanceName
115C 1B84 07/14 02:06:50.619 03 clusterutil.cpp(1147) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG4
115C 1B84 07/14 02:06:50.619 03 clusterutil.cpp(432) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for VirtualServerName
115C 1B84 07/14 02:06:50.621 03 clusterutil.cpp(1147) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG4
115C 1B84 07/14 02:06:50.621 03 clusterutil.cpp(432) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for InstanceName
115C 1B84 07/14 02:06:50.623 61 neapplicationnamespace.cpp(2439) [00000000034BE920] NORMAL IsIncrementalAllowed --> countSimpleMode 1, countReadOnly 0, countLogShipPrimary 0
115C 1B84 07/14 02:06:50.631 03 clusterutil.cpp(1147) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG1
115C 1B84 07/14 02:06:50.631 03 clusterutil.cpp(432) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for VirtualServerName
115C 1B84 07/14 02:06:50.633 03 clusterutil.cpp(1147) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG1
115C 1B84 07/14 02:06:50.633 03 clusterutil.cpp(432) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for InstanceName
115C 1B84 07/14 02:06:50.636 03 clusterutil.cpp(1147) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG2
115C 1B84 07/14 02:06:50.636 03 clusterutil.cpp(432) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for VirtualServerName
115C 1B84 07/14 02:06:50.639 03 clusterutil.cpp(1147) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG2
115C 1B84 07/14 02:06:50.639 03 clusterutil.cpp(432) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for InstanceName
115C 1B84 07/14 02:06:50.640 03 clusterutil.cpp(1147) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG3
115C 1B84 07/14 02:06:50.640 03 clusterutil.cpp(432) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for VirtualServerName
115C 1B84 07/14 02:06:50.640 03 clusterutil.cpp(1147) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG3
115C 1B84 07/14 02:06:50.640 03 clusterutil.cpp(432) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for InstanceName
115C 1B84 07/14 02:06:50.643 03 clusterutil.cpp(1147) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG4
115C 1B84 07/14 02:06:50.643 03 clusterutil.cpp(432) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for VirtualServerName
115C 1B84 07/14 02:06:50.646 03 clusterutil.cpp(1147) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG4
115C 1B84 07/14 02:06:50.646 03 clusterutil.cpp(432) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for InstanceName
115C 1B84 07/14 02:06:50.647 61 neapplicationnamespace.cpp(2439) [00000000034BE920] NORMAL IsIncrementalAllowed --> countSimpleMode 0, countReadOnly 0, countLogShipPrimary 0
115C 1B84 07/14 02:06:50.655 03 clusterutil.cpp(1147) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG1
115C 1B84 07/14 02:06:50.655 03 clusterutil.cpp(432) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for VirtualServerName
115C 1B84 07/14 02:06:50.658 03 clusterutil.cpp(1147) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG1
115C 1B84 07/14 02:06:50.658 03 clusterutil.cpp(432) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for InstanceName
115C 1B84 07/14 02:06:50.661 03 clusterutil.cpp(1147) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG2
115C 1B84 07/14 02:06:50.661 03 clusterutil.cpp(432) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for VirtualServerName
115C 1B84 07/14 02:06:50.664 03 clusterutil.cpp(1147) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG2
115C 1B84 07/14 02:06:50.664 03 clusterutil.cpp(432) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for InstanceName
115C 1B84 07/14 02:06:50.665 03 clusterutil.cpp(1147) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG3
115C 1B84 07/14 02:06:50.665 03 clusterutil.cpp(432) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for VirtualServerName
115C 1B84 07/14 02:06:50.665 03 clusterutil.cpp(1147) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG3
115C 1B84 07/14 02:06:50.665 03 clusterutil.cpp(432) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for InstanceName
115C 1B84 07/14 02:06:50.668 03 clusterutil.cpp(1147) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG4
115C 1B84 07/14 02:06:50.668 03 clusterutil.cpp(432) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for VirtualServerName
115C 1B84 07/14 02:06:50.671 03 clusterutil.cpp(1147) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG4
115C 1B84 07/14 02:06:50.671 03 clusterutil.cpp(432) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for InstanceName
115C 1B84 07/14 02:06:50.672 61 neapplicationnamespace.cpp(2439) [00000000034BE920] NORMAL IsIncrementalAllowed --> countSimpleMode 1, countReadOnly 0, countLogShipPrimary 0
115C 1B84 07/14 02:06:50.680 03 clusterutil.cpp(1147) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG1
115C 1B84 07/14 02:06:50.681 03 clusterutil.cpp(432) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for VirtualServerName
115C 1B84 07/14 02:06:50.683 03 clusterutil.cpp(1147) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG1
115C 1B84 07/14 02:06:50.683 03 clusterutil.cpp(432) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for InstanceName
115C 1B84 07/14 02:06:50.686 03 clusterutil.cpp(1147) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG2
115C 1B84 07/14 02:06:50.686 03 clusterutil.cpp(432) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for VirtualServerName
115C 1B84 07/14 02:06:50.688 03 clusterutil.cpp(1147) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG2
115C 1B84 07/14 02:06:50.688 03 clusterutil.cpp(432) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for InstanceName
115C 1B84 07/14 02:06:50.689 03 clusterutil.cpp(1147) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG3
115C 1B84 07/14 02:06:50.689 03 clusterutil.cpp(432) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for VirtualServerName
115C 1B84 07/14 02:06:50.690 03 clusterutil.cpp(1147) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG3
115C 1B84 07/14 02:06:50.690 03 clusterutil.cpp(432) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for InstanceName
115C 1B84 07/14 02:06:50.693 03 clusterutil.cpp(1147) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG4
115C 1B84 07/14 02:06:50.693 03 clusterutil.cpp(432) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for VirtualServerName
115C 1B84 07/14 02:06:50.695 03 clusterutil.cpp(1147) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG4
115C 1B84 07/14 02:06:50.695 03 clusterutil.cpp(432) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for InstanceName
115C 1B84 07/14 02:06:50.697 61 neapplicationnamespace.cpp(2439) [00000000034BE920] NORMAL IsIncrementalAllowed --> countSimpleMode 0, countReadOnly 0, countLogShipPrimary 0
115C 1B84 07/14 02:06:50.705 03 clusterutil.cpp(1147) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG1
115C 1B84 07/14 02:06:50.705 03 clusterutil.cpp(432) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for VirtualServerName
115C 1B84 07/14 02:06:50.707 03 clusterutil.cpp(1147) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG1
115C 1B84 07/14 02:06:50.707 03 clusterutil.cpp(432) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for InstanceName
115C 1B84 07/14 02:06:50.710 03 clusterutil.cpp(1147) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG2
115C 1B84 07/14 02:06:50.710 03 clusterutil.cpp(432) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for VirtualServerName
115C 1B84 07/14 02:06:50.713 03 clusterutil.cpp(1147) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG2
115C 1B84 07/14 02:06:50.713 03 clusterutil.cpp(432) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for InstanceName
115C 1B84 07/14 02:06:50.714 03 clusterutil.cpp(1147) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG3
115C 1B84 07/14 02:06:50.714 03 clusterutil.cpp(432) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for VirtualServerName
115C 1B84 07/14 02:06:50.715 03 clusterutil.cpp(1147) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG3
115C 1B84 07/14 02:06:50.715 03 clusterutil.cpp(432) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for InstanceName
115C 1B84 07/14 02:06:50.717 03 clusterutil.cpp(1147) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG4
115C 1B84 07/14 02:06:50.717 03 clusterutil.cpp(432) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for VirtualServerName
115C 1B84 07/14 02:06:50.720 03 clusterutil.cpp(1147) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG4
115C 1B84 07/14 02:06:50.720 03 clusterutil.cpp(432) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for InstanceName
115C 1B84 07/14 02:06:50.722 61 neapplicationnamespace.cpp(2439) [00000000034BE920] NORMAL IsIncrementalAllowed --> countSimpleMode 0, countReadOnly 0, countLogShipPrimary 0
115C 1B84 07/14 02:06:50.730 03 clusterutil.cpp(1147) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG1
115C 1B84 07/14 02:06:50.730 03 clusterutil.cpp(432) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for VirtualServerName
115C 1B84 07/14 02:06:50.732 03 clusterutil.cpp(1147) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG1
115C 1B84 07/14 02:06:50.732 03 clusterutil.cpp(432) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for InstanceName
115C 1B84 07/14 02:06:50.735 03 clusterutil.cpp(1147) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG2
115C 1B84 07/14 02:06:50.735 03 clusterutil.cpp(432) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for VirtualServerName
115C 1B84 07/14 02:06:50.737 03 clusterutil.cpp(1147) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG2
115C 1B84 07/14 02:06:50.737 03 clusterutil.cpp(432) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for InstanceName
115C 1B84 07/14 02:06:50.738 03 clusterutil.cpp(1147) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG3
115C 1B84 07/14 02:06:50.738 03 clusterutil.cpp(432) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for VirtualServerName
115C 1B84 07/14 02:06:50.739 03 clusterutil.cpp(1147) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG3
115C 1B84 07/14 02:06:50.739 03 clusterutil.cpp(432) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for InstanceName
115C 1B84 07/14 02:06:50.742 03 clusterutil.cpp(1147) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG4
115C 1B84 07/14 02:06:50.742 03 clusterutil.cpp(432) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for VirtualServerName
115C 1B84 07/14 02:06:50.745 03 clusterutil.cpp(1147) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG4
115C 1B84 07/14 02:06:50.745 03 clusterutil.cpp(432) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for InstanceName
115C 1B84 07/14 02:06:50.746 61 neapplicationnamespace.cpp(2439) [00000000034BE920] NORMAL IsIncrementalAllowed --> countSimpleMode 1, countReadOnly 0, countLogShipPrimary 0
115C 1B84 07/14 02:06:50.754 03 clusterutil.cpp(1147) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG1
115C 1B84 07/14 02:06:50.754 03 clusterutil.cpp(432) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for VirtualServerName
115C 1B84 07/14 02:06:50.757 03 clusterutil.cpp(1147) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG1
115C 1B84 07/14 02:06:50.757 03 clusterutil.cpp(432) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for InstanceName
115C 1B84 07/14 02:06:50.760 03 clusterutil.cpp(1147) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG2
115C 1B84 07/14 02:06:50.760 03 clusterutil.cpp(432) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for VirtualServerName
115C 1B84 07/14 02:06:50.762 03 clusterutil.cpp(1147) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG2
115C 1B84 07/14 02:06:50.762 03 clusterutil.cpp(432) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for InstanceName
115C 1B84 07/14 02:06:50.763 03 clusterutil.cpp(1147) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG3
115C 1B84 07/14 02:06:50.763 03 clusterutil.cpp(432) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for VirtualServerName
115C 1B84 07/14 02:06:50.764 03 clusterutil.cpp(1147) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG3
115C 1B84 07/14 02:06:50.764 03 clusterutil.cpp(432) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for InstanceName
115C 1B84 07/14 02:06:50.767 03 clusterutil.cpp(1147) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG4
115C 1B84 07/14 02:06:50.767 03 clusterutil.cpp(432) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for VirtualServerName
115C 1B84 07/14 02:06:50.769 03 clusterutil.cpp(1147) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG4
115C 1B84 07/14 02:06:50.769 03 clusterutil.cpp(432) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for InstanceName
115C 1B84 07/14 02:06:50.771 61 neapplicationnamespace.cpp(2439) [00000000034BE920] NORMAL IsIncrementalAllowed --> countSimpleMode 0, countReadOnly 0, countLogShipPrimary 0
115C 1B84 07/14 02:06:50.779 03 clusterutil.cpp(1147) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG1
115C 1B84 07/14 02:06:50.779 03 clusterutil.cpp(432) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for VirtualServerName
115C 1B84 07/14 02:06:50.782 03 clusterutil.cpp(1147) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG1
115C 1B84 07/14 02:06:50.782 03 clusterutil.cpp(432) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for InstanceName
115C 1B84 07/14 02:06:50.784 03 clusterutil.cpp(1147) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG2
115C 1B84 07/14 02:06:50.784 03 clusterutil.cpp(432) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for VirtualServerName
115C 1B84 07/14 02:06:50.787 03 clusterutil.cpp(1147) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG2
115C 1B84 07/14 02:06:50.787 03 clusterutil.cpp(432) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for InstanceName
115C 1B84 07/14 02:06:50.788 03 clusterutil.cpp(1147) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG3
115C 1B84 07/14 02:06:50.788 03 clusterutil.cpp(432) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for VirtualServerName
115C 1B84 07/14 02:06:50.789 03 clusterutil.cpp(1147) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG3
115C 1B84 07/14 02:06:50.789 03 clusterutil.cpp(432) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for InstanceName
115C 1B84 07/14 02:06:50.792 03 clusterutil.cpp(1147) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG4
115C 1B84 07/14 02:06:50.792 03 clusterutil.cpp(432) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for VirtualServerName
115C 1B84 07/14 02:06:50.794 03 clusterutil.cpp(1147) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG4
115C 1B84 07/14 02:06:50.794 03 clusterutil.cpp(432) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for InstanceName
115C 1B84 07/14 02:06:50.796 61 neapplicationnamespace.cpp(2439) [00000000034BE920] NORMAL IsIncrementalAllowed --> countSimpleMode 0, countReadOnly 0, countLogShipPrimary 0
115C 1B84 07/14 02:06:50.804 03 clusterutil.cpp(1147) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG1
115C 1B84 07/14 02:06:50.804 03 clusterutil.cpp(432) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for VirtualServerName
115C 1B84 07/14 02:06:50.807 03 clusterutil.cpp(1147) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG1
115C 1B84 07/14 02:06:50.807 03 clusterutil.cpp(432) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for InstanceName
115C 1B84 07/14 02:06:50.809 03 clusterutil.cpp(1147) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG2
115C 1B84 07/14 02:06:50.809 03 clusterutil.cpp(432) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for VirtualServerName
115C 1B84 07/14 02:06:50.812 03 clusterutil.cpp(1147) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG2
115C 1B84 07/14 02:06:50.812 03 clusterutil.cpp(432) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for InstanceName
115C 1B84 07/14 02:06:50.813 03 clusterutil.cpp(1147) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG3
115C 1B84 07/14 02:06:50.813 03 clusterutil.cpp(432) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for VirtualServerName
115C 1B84 07/14 02:06:50.814 03 clusterutil.cpp(1147) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG3
115C 1B84 07/14 02:06:50.814 03 clusterutil.cpp(432) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for InstanceName
115C 1B84 07/14 02:06:50.816 03 clusterutil.cpp(1147) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG4
115C 1B84 07/14 02:06:50.816 03 clusterutil.cpp(432) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for VirtualServerName
115C 1B84 07/14 02:06:50.819 03 clusterutil.cpp(1147) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG4
115C 1B84 07/14 02:06:50.819 03 clusterutil.cpp(432) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for InstanceName
115C 1B84 07/14 02:06:50.820 61 neapplicationnamespace.cpp(2439) [00000000034BE920] NORMAL IsIncrementalAllowed --> countSimpleMode 0, countReadOnly 0, countLogShipPrimary 0
115C 1B84 07/14 02:06:50.828 03 clusterutil.cpp(1147) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG1
115C 1B84 07/14 02:06:50.828 03 clusterutil.cpp(432) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for VirtualServerName
115C 1B84 07/14 02:06:50.831 03 clusterutil.cpp(1147) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG1
115C 1B84 07/14 02:06:50.831 03 clusterutil.cpp(432) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for InstanceName
115C 1B84 07/14 02:06:50.833 03 clusterutil.cpp(1147) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG2
115C 1B84 07/14 02:06:50.833 03 clusterutil.cpp(432) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for VirtualServerName
115C 1B84 07/14 02:06:50.836 03 clusterutil.cpp(1147) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG2
115C 1B84 07/14 02:06:50.836 03 clusterutil.cpp(432) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for InstanceName
115C 1B84 07/14 02:06:50.837 03 clusterutil.cpp(1147) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG3
115C 1B84 07/14 02:06:50.837 03 clusterutil.cpp(432) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for VirtualServerName
115C 1B84 07/14 02:06:50.838 03 clusterutil.cpp(1147) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG3
115C 1B84 07/14 02:06:50.838 03 clusterutil.cpp(432) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for InstanceName
115C 1B84 07/14 02:06:50.840 03 clusterutil.cpp(1147) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG4
115C 1B84 07/14 02:06:50.840 03 clusterutil.cpp(432) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for VirtualServerName
115C 1B84 07/14 02:06:50.842 03 clusterutil.cpp(1147) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG4
115C 1B84 07/14 02:06:50.842 03 clusterutil.cpp(432) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for InstanceName
115C 1B84 07/14 02:06:50.844 61 neapplicationnamespace.cpp(2439) [00000000034BE920] NORMAL IsIncrementalAllowed --> countSimpleMode 0, countReadOnly 0, countLogShipPrimary 0
115C 1B84 07/14 02:06:50.851 03 clusterutil.cpp(1147) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG1
115C 1B84 07/14 02:06:50.851 03 clusterutil.cpp(432) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for VirtualServerName
115C 1B84 07/14 02:06:50.854 03 clusterutil.cpp(1147) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG1
115C 1B84 07/14 02:06:50.854 03 clusterutil.cpp(432) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for InstanceName
115C 1B84 07/14 02:06:50.857 03 clusterutil.cpp(1147) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG2
115C 1B84 07/14 02:06:50.857 03 clusterutil.cpp(432) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for VirtualServerName
115C 1B84 07/14 02:06:50.859 03 clusterutil.cpp(1147) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG2
115C 1B84 07/14 02:06:50.859 03 clusterutil.cpp(432) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for InstanceName
115C 1B84 07/14 02:06:50.860 03 clusterutil.cpp(1147) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG3
115C 1B84 07/14 02:06:50.860 03 clusterutil.cpp(432) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for VirtualServerName
115C 1B84 07/14 02:06:50.861 03 clusterutil.cpp(1147) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG3
115C 1B84 07/14 02:06:50.861 03 clusterutil.cpp(432) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for InstanceName
115C 1B84 07/14 02:06:50.864 03 clusterutil.cpp(1147) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG4
115C 1B84 07/14 02:06:50.864 03 clusterutil.cpp(432) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for VirtualServerName
115C 1B84 07/14 02:06:50.866 03 clusterutil.cpp(1147) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG4
115C 1B84 07/14 02:06:50.866 03 clusterutil.cpp(432) [0000000003FADD00] WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for InstanceName

Connect SQL Server 2012 from Windows Server 2003 with native client 9.0

Hi,
I currently have a setup where ETL tool Ab Intio, running on a Linux server, connects to the SQL Server 2005 through a passthrough Wintel server with Windows Server 2003 OS using SQL server native client 9.0
Now I have the requirement to upgrade the SQL server from 2005 to 2012.
My question is, will it be possible to connect to SQL server 2012 through Windows Server 2003 with native client 9.0?
As per the specs, I need native client 11.0+ to fully support SQL Server 2012, but then, as per specs, native client 11.0 doesnot run on Windows server 2003. OS upgradation is currently not on the cards.
So will it be possible to the run the basic queries we use currently, if we can connect SQL server 2012 through Windows Server 2003 with native client 9.0/10.0, without updgrading the OS of the Wintel server?
Thanking you in advance!

Hi Soumya,
Yes, you can use the SQL Server Native Client shipped with SQL Server 2005 to connect to a SQL Server 2012 instance, and there is no need to upgrade the operating system.
Regards,
Mike Yin
TechNet Community Support

Windows Server 2003 R2 Backup with Hyper-V in DPM

Hello,
I am trying to backup multiple Windows Server 2003 R2 VMs on Hyper-V (Windows Server 2012 R2) with DPM.
When I try to this I get the following errors:
On the Hyper-V Host:
Source: VSS ID:8229
A VSS writer has rejected an event with error 0x800423f4, The writer experienced a non-transient error. If the backup process is retried,
the error is likely to reoccur.
. Changes that the writer made to the writer components while handling the event will not be available to the requester. Check the event log for related events from the application hosting the VSS writer.
Operation:
   PrepareForSnapshot Event
Context:
   Execution Context: Writer
   Writer Class Id: {66841cd4-6ded-4f4b-8f17-fd23f8ddc3de}
   Writer Name: Microsoft Hyper-V VSS Writer
   Writer Instance ID: {0b5be050-91e2-41a6-9207-414f1291f975}
   Command Line: C:\Windows\system32\vmms.exe
   Process ID: 5312
Source: Hyper-V-VMMS ID: 18014
Checkpoint operation for 'VMName' was cancelled. (Virtual machine ID D605FC49-D379-4C60-A730-485C8E9279DC)
Source: Hyper-V-VMMS ID: 18012
Checkpoint operation for 'VMName' failed. (Virtual machine ID D605FC49-D379-4C60-A730-485C8E9279DC)
Source: Hyper-V-VMMS ID: 10150
Could not create backup checkpoint for virtual machine 'VMName': Element not found. (0x80070490). (Virtual machine ID D605FC49-D379-4C60-A730-485C8E9279DC)
Source: Hyper-V-Worker ID: 3280
'VMName' could not initiate a checkpoint operation: Element not found. (0x80070490). (Virtual machine ID D605FC49-D379-4C60-A730-485C8E9279DC)
Source: Hyper-V-VMMS ID: 16010
The operation failed.
The Output of vssadmin list writers on the Hyper-V Host looks like this:
Writer name: 'Microsoft Hyper-V VSS Writer'
   Writer Id: {66841cd4-6ded-4f4b-8f17-fd23f8ddc3de}
   Writer Instance Id: {0b5be050-91e2-41a6-9207-414f1291f975}
   State: [8] Failed
   Last error: Non-retryable error
In the Windows Server 2003 R2 VM there are no errors in the eventlog.
Only the information, that VSS is started and stopped after a while.
When I do a Backup with ntbackup of in the VM everything runs fine.
When I create a checkpoint with Hyper-V everything runs fine, too.
The integration services are up to date and get-vmintegrationservice -vmname VMName shows everything is enabled and OK.
On the Hyper-V host there are 13 VMs. 3 of them are running Windows Server 2003 R2 and 2 of them are showing this error. It seems to be no general problem with Windows Server 2003 R2 then.
I tried the backup on a different Hyper-V host with no success.
How can I narrow down the cause of this error?
Thanks.
greets,
torsten

Thank you to everyone in this thread!
After digging through VSS and Hyper-V dead-ends, the solution above worked for me in a W2012 R2 environment.
I only had this problem trying to back up W2012 R2 Hyper-V VMs stored on a CSV, hosted on a W2012 R2 Host Cluster, backing up from a Host node. I could back up from within the guests fine. Both Windows Server Backup and DPM 2012 R2
gave VSS errors on the cluster hosts.
In fact Windows Server Backup complains with 80780189 it won't back up an application with files on a CSV, which is a common cluster configuration. This is an example of another caveat in a minefield of MS caveats buried in fine print which often negates
configurations touted by MS Marketing, things which sound great on a sell sheet, but in practice are impractical or just not production-ready because of these restrictions.
Disabled Backup in Integration Services, performed an offline back up from DPM 2012 R2 (which did briefly affect serving the workloads on the VM), which succeeded, and then re-enabled Backup in Integration Services. DPM then continued to
sync successfully after that for a day. However, this problem returned after a period of heavy DPM backup activity. So I redistributed backups through various Protection Groups to spread the DPM load over a longer period and this seems to
have solved this problem.
In general I had lots of problems installing, configuring, and now operating DPM, so the experience has not been smooth, but most of the problems have now been solved. I find you have to "baby" this product and not push it too hard,
otherwise things start breaking.
Thanks again everyone!
DPM Error ID 30111 0x800423F4
DPM-EM Event ID 3106

DPM 2012 R2 - Windows Server 2012 R2 Hyper-v backup of Windows Server 2003 R2 - Non-retryable error 0x80070490

Hi,
I have a hyper-v host running Windows Server 2012 R2 Standard with Hyper-V on it, and on that host I got 5 virtual machines running and of those 5, 4 of those the DPM are able to backup but when DPM tries to backup a server running Windows Server 2003 R2
I get the following errors in the eventlog.
Log Name: Microsoft-Windows-Hyper-V-VMMS-Admin
Source: Microsoft-Windows-Hyper-V-VMMS
Date: 2013-11-28 10:46:58
Event ID: 18014
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: HYPERV05.domain.local
Description:
Checkpoint operation for 'SERVER01' was cancelled. (Virtual machine ID 5221623F-C80C-4B92-AD02-F545D118C859)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Hyper-V-VMMS" Guid="{6066F867-7CA1-4418-85FD-36E3F9C0600C}" />
<EventID>18014</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2013-11-28T09:46:58.365308800Z" />
<EventRecordID>411</EventRecordID>
<Correlation />
<Execution ProcessID="2116" ThreadID="4248" />
<Channel>Microsoft-Windows-Hyper-V-VMMS-Admin</Channel>
<Computer>HYPERV05.domain.local</Computer>
<Security UserID="S-1-5-18" />
</System>
<UserData>
<VmlEventLog xmlns:auto-ns2="http://schemas.microsoft.com/win/2004/08/events" xmlns="http://www.microsoft.com/Windows/Virtualization/Events">
<VmName>SERVER01</VmName>
<VmId>5221623F-C80C-4B92-AD02-F545D118C859</VmId>
</VmlEventLog>
</UserData>
</Event>
Log Name: Microsoft-Windows-Hyper-V-VMMS-Admin
Source: Microsoft-Windows-Hyper-V-VMMS
Date: 2013-11-28 10:46:58
Event ID: 18012
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: HYPERV05.domain.local
Description:
Checkpoint operation for 'SERVER01' failed. (Virtual machine ID 5221623F-C80C-4B92-AD02-F545D118C859)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Hyper-V-VMMS" Guid="{6066F867-7CA1-4418-85FD-36E3F9C0600C}" />
<EventID>18012</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2013-11-28T09:46:58.365308800Z" />
<EventRecordID>412</EventRecordID>
<Correlation />
<Execution ProcessID="2116" ThreadID="4248" />
<Channel>Microsoft-Windows-Hyper-V-VMMS-Admin</Channel>
<Computer>HYPERV05.domain.local</Computer>
<Security UserID="S-1-5-18" />
</System>
<UserData>
<VmlEventLog xmlns:auto-ns2="http://schemas.microsoft.com/win/2004/08/events" xmlns="http://www.microsoft.com/Windows/Virtualization/Events">
<VmName>SERVER01</VmName>
<VmId>5221623F-C80C-4B92-AD02-F545D118C859</VmId>
</VmlEventLog>
</UserData>
</Event>
Log Name: Microsoft-Windows-Hyper-V-VMMS-Admin
Source: Microsoft-Windows-Hyper-V-VMMS
Date: 2013-11-28 10:46:58
Event ID: 10150
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: HYPERV05.domain.local
Description:
Could not create backup checkpoint for virtual machine 'SERVER01': Element not found. (0x80070490). (Virtual machine ID 5221623F-C80C-4B92-AD02-F545D118C859)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Hyper-V-VMMS" Guid="{6066F867-7CA1-4418-85FD-36E3F9C0600C}" />
<EventID>10150</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2013-11-28T09:46:58.365308800Z" />
<EventRecordID>413</EventRecordID>
<Correlation />
<Execution ProcessID="2116" ThreadID="4280" />
<Channel>Microsoft-Windows-Hyper-V-VMMS-Admin</Channel>
<Computer>HYPERV05.domain.local</Computer>
<Security UserID="S-1-5-18" />
</System>
<UserData>
<VmlEventLog xmlns:auto-ns2="http://schemas.microsoft.com/win/2004/08/events" xmlns="http://www.microsoft.com/Windows/Virtualization/Events">
<VmName>SERVER01</VmName>
<VmId>5221623F-C80C-4B92-AD02-F545D118C859</VmId>
<Parameter0>%%2147943568</Parameter0>
<Parameter1>0x80070490</Parameter1>
</VmlEventLog>
</UserData>
</Event>
What I have done to try to troubleshoot this issue is:
Reinstalled DPM - No sucess
Restarted the Hyper-v Host - No sucess
I'm at the point where I am out of ideas and google hasn't given me much.
/Joseph

i have the same error.
"vssadmin list writers" shows last error unknown for all writers
disk space is sufficient
ntbackup of systemdrive and systemstate runs fine.
i installed KB940349 which fixes some vss related issues but the problem is still there.
any ideas?
Thanks.
When you have vssadmin reporting unknown error the only way to reset the vsswriters (as I understand it please correct me if I'm wrong :) ) is to restart the machine. The Fellenator is correct, make use that the vsswriter is working correctly since this
is the main function DPM is using when taking backup. He's also right in saying that it's outside the scope! Create a new thread on your error, then you will get much better responce!
/Joseph

Migrate from server core 2008 r2 hyper-v with failover cluster volumes to server core 2012 r2 hyper-v with failover cluster volumes on new san hardware

We are getting ready to migrate from server core 2008 r2 hyper-v with failover cluster volumes on an iscsi san to server core 2012 r2 hyper-v with failover cluster volumes on a new iscsi san.
I've been searching for a "best practices" article for this but have been coming up short. The information I have found either pertains to migrating from 2008 r2 to 2012 r2 with failover cluster volumes on the same hardware, or migrating
to different hardware without failover cluster volumes.
If there is anyone out there that has completed a similar migration, it would be great to hear any feedback you may have on your experiences.
Currently, my approach is as follows:
1. Configure new hyper-v with failover cluster volumes on new SAN with new 2012 r2 hostnodes and 2012 r2 management server
2. Turn off the virtual machines on old 2008 r2 hyper-v hostnodes
3. Stop the VMMS service on the 2008 r2 hostnodes
4. copy the virtual machine files and folders over to the new failover cluster volumes
5. Import vm's into server 2012 r2 hyper-v.
Any feedback on the opertain I have in mind would be helpful.
Thank you,
Rob

Hi Rob,
Yes , I agree with that "file copy " can achieve migration.
Also you can try "copy cluster wizard " :
https://technet.microsoft.com/en-us/library/dn530779.aspx
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

"Exchange organisation does not support this version of Exchange server"

I am facing the error "Exchange Organisation does not support this version of exchange server" at time of installation of exchange server 2007 in the Windows server 2008 Enterprise edition.
I have already installed exchange Server 2010 in the that domain.
The following the image that show the error that i am facing
I have the checked current Active Directory or Exchange Server schema version by using
Using that i got the following information
"dsquery * cn=schema,cn=configuration,dc=india,dc=local -scope base -attr objectVersion"
objectVersion = Windows Server 2008 RTM
CN=ms-Exch-Schema-Version-Pt,cn=schema,cn=configuration,dc=india,dc=local -scope base -attr rangeUpper"
rangeUpper = 14726 ( Exchange server 2010 sp1)
I am attaching the Exchange server setup logs here
[5/31/2013 3:04:28 PM] [0] **********************************************
[5/31/2013 3:04:28 PM] [0] Starting Microsoft Exchange 2007 Setup
[5/31/2013 3:04:28 PM] [0] **********************************************
[5/31/2013 3:04:28 PM] [0] Operating System version: Microsoft Windows NT 6.1.7600.0.
[5/31/2013 3:04:28 PM] [0] Setup version: 8.1.240.6.
[5/31/2013 3:04:28 PM] [0] Logged on user: INDIA\administrator.
[5/31/2013 3:04:28 PM] [0] Command Line Parameter Name='mode', Value='Install'.
[5/31/2013 3:04:28 PM] [0] Command Line Parameter Name='sourcedir', Value='C:\Exchange2007'.
[5/31/2013 3:04:28 PM] [0] Command Line Parameter Name='fromsetup', Value=''.
[5/31/2013 3:04:28 PM] [0] ExSetupUI was started with the following command: '-mode:install -sourcedir:C:\Exchange2007 /FromSetup'.
[5/31/2013 3:04:29 PM] [0] Setup is choosing the domain controller to use
[5/31/2013 3:04:29 PM] [0] Setup is choosing a local domain controller...
[5/31/2013 3:04:31 PM] [0] Setup has chosen the local domain controller NewDelhi.india.local for initial queries
[5/31/2013 3:04:31 PM] [0] PrepareAD has either not been run or has not replicated to the domain controller used by Setup. Setup will attempt to use the Schema Master domain controller NewDelhi.india.local
[5/31/2013 3:04:31 PM] [0] The schema master domain controller is available
[5/31/2013 3:04:31 PM] [0] The schema master domain controller is in the local domain; setup will use NewDelhi.india.local
[5/31/2013 3:04:31 PM] [0] Setup is choosing a global catalog...
[5/31/2013 3:04:31 PM] [0] Setup has chosen the global catalog server NewDelhi.india.local.
[5/31/2013 3:04:31 PM] [0] Setup will use the domain controller 'NewDelhi.india.local'.
[5/31/2013 3:04:31 PM] [0] Setup will use the global catalog 'NewDelhi.india.local'.
[5/31/2013 3:04:31 PM] [0] Exchange configuration container for the organization is 'CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=india,DC=local'.
[5/31/2013 3:04:31 PM] [0] No Exchange organization container was found for the organization. Message: 'Could not find the Organization Container.'.
[5/31/2013 3:04:31 PM] [0] Setup will search for an Exchange Server object for the local machine with name 'PONDY'.
[5/31/2013 3:04:31 PM] [0] No Exchange Server with identity 'PONDY' was found.
[5/31/2013 3:04:31 PM] [0] The following roles are unpacked:
[5/31/2013 3:04:31 PM] [0] The following roles are installed:
[5/31/2013 3:04:31 PM] [0] The local server does not have any Exchange files installed.
[5/31/2013 3:04:31 PM] [0] Setup will use the path 'C:\Exchange2007' for installing Exchange.
[5/31/2013 3:04:31 PM] [0] The server is cluster type: 'None'.
[5/31/2013 3:04:31 PM] [0] The requested cluster type: 'None'.
[5/31/2013 3:04:31 PM] [0] The installation mode is set to: 'Install'.
[5/31/2013 3:04:31 PM] [0] Exchange organization name is required for this mode.
[5/31/2013 3:04:31 PM] [0] Active Directory Initialization status : 'True'.
[5/31/2013 3:04:31 PM] [0] Schema Update Required Status : 'False'.
[5/31/2013 3:04:31 PM] [0] Organization Configuration Update Required Status : 'True'.
[5/31/2013 3:04:31 PM] [0] Domain Configuration Update Required Status : 'False'.
[5/31/2013 3:04:32 PM] [0] Applying default role selection state
[5/31/2013 3:04:32 PM] [0] Setup is determining what organization-level operations to perform.
[5/31/2013 3:04:32 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
[5/31/2013 3:04:32 PM] [0] Setup will run from path 'C:\Exchange2007\Setup\ServerRoles\Common'.
[5/31/2013 3:04:32 PM] [0] InstallModeDataHandler has 4 DataHandlers
[5/31/2013 3:04:32 PM] [0] Setup is determining what organization-level operations to perform.
[5/31/2013 3:04:32 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
[5/31/2013 3:04:32 PM] [0] Setup will run from path 'C:\Exchange2007\Setup\ServerRoles\Common'.
[5/31/2013 3:04:32 PM] [0] InstallModeDataHandler has 5 DataHandlers
[5/31/2013 3:04:32 PM] [0] Setup is determining what organization-level operations to perform.
[5/31/2013 3:04:32 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
[5/31/2013 3:04:32 PM] [0] Setup will run from path 'C:\Exchange2007\Setup\ServerRoles\Common'.
[5/31/2013 3:04:32 PM] [0] InstallModeDataHandler has 6 DataHandlers
[5/31/2013 3:04:32 PM] [0] Setup is determining what organization-level operations to perform.
[5/31/2013 3:04:32 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
[5/31/2013 3:04:32 PM] [0] Setup will run from path 'C:\Exchange2007\Setup\ServerRoles\Common'.
[5/31/2013 3:04:32 PM] [0] InstallModeDataHandler has 6 DataHandlers
[5/31/2013 3:04:32 PM] [0] RootDataHandler has 1 DataHandlers
[5/31/2013 3:04:44 PM] [0] Setup is determining what organization-level operations to perform.
[5/31/2013 3:04:44 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
[5/31/2013 3:04:44 PM] [0] Setup will run from path 'C:\Exchange2007\Setup\ServerRoles\Common'.
[5/31/2013 3:04:44 PM] [0] InstallModeDataHandler has 5 DataHandlers
[5/31/2013 3:04:44 PM] [0] Setup is determining what organization-level operations to perform.
[5/31/2013 3:04:44 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
[5/31/2013 3:04:44 PM] [0] Setup will run from path 'C:\Exchange2007\Setup\ServerRoles\Common'.
[5/31/2013 3:04:44 PM] [0] InstallModeDataHandler has 4 DataHandlers
[5/31/2013 3:04:44 PM] [0] Setup is determining what organization-level operations to perform.
[5/31/2013 3:04:44 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
[5/31/2013 3:04:44 PM] [0] Setup will run from path 'C:\Exchange2007\Setup\ServerRoles\Common'.
[5/31/2013 3:04:44 PM] [0] InstallModeDataHandler has 1 DataHandlers
[5/31/2013 3:04:46 PM] [0] Setup is determining what organization-level operations to perform.
[5/31/2013 3:04:46 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
[5/31/2013 3:04:46 PM] [0] Setup will run from path 'C:\Exchange2007\Setup\ServerRoles\Common'.
[5/31/2013 3:04:46 PM] [0] InstallModeDataHandler has 4 DataHandlers
[5/31/2013 3:04:48 PM] [0] Validating options for the 0 requested roles
[5/31/2013 3:04:48 PM] [0] Validating options for the 0 requested roles
[5/31/2013 3:04:53 PM] [0] Setup is determining what organization-level operations to perform.
[5/31/2013 3:04:53 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
[5/31/2013 3:04:53 PM] [0] Because the value was specified, setup is setting the argument OrganizationName to the value First Organization.
[5/31/2013 3:04:53 PM] [0] **************
[5/31/2013 3:04:53 PM] [0] Setup will run the task 'test-setuphealth'
[5/31/2013 3:04:53 PM] [1] Setup launched task 'test-setuphealth -DomainController 'NewDelhi.india.local' -DownloadConfigurationUpdates $true -ExchangeVersion '8.1.240.6' -Roles 'Global' -ScanType
'PrecheckInstall' -SetupRoles 'Global' -PrepareOrganization $true'
[5/31/2013 3:04:53 PM] [1] Beginning processing.
[5/31/2013 3:05:24 PM] [1] [ERROR] The Exchange organization does not support this version of Exchange Server.
[5/31/2013 3:05:24 PM] [1] Ending processing.
[5/31/2013 3:05:24 PM] [0] **************
[5/31/2013 3:05:24 PM] [0] Setup will run the task 'test-setuphealth'
[5/31/2013 3:05:24 PM] [1] Setup launched task 'test-setuphealth -DomainController 'NewDelhi.india.local' -DownloadConfigurationUpdates $false -ExchangeVersion '8.1.240.6' -Roles 'Mailbox' -ScanType 'PrecheckInstall' -SetupRoles 'AdminTools','Mailbox' -CreatePublicDB
$true -TargetDir 'C:\Program Files\Microsoft\Exchange Server' -IISInstalled $true'
[5/31/2013 3:05:24 PM] [1] Beginning processing.
[5/31/2013 3:05:27 PM] [1] [ERROR] The Exchange organization does not support this version of Exchange Server.
[5/31/2013 3:05:27 PM] [1] Ending processing.
[5/31/2013 3:05:40 PM] [0] End of Setup
[5/31/2013 3:05:40 PM] [0] **********************************************
Please suggest me how to install the exchange server 2007 SP1 on the domain that has exchange server 2010 sp1
Thanks

dear amit can u tell me I have one doming sg.com .I used for lab first I install in exchange server 2013 is normaly install and working fine .then I format my pc and agine install exchange 2010
Exchange organisation does not support this version of Exchange server
warning
setup is going to perepare the organization for exchange 2010 by using setup/ prepare AD . no exchange 2007 server roles have been deteted in this topology .
please can u tell me the how install exchange 2010
thanks

I am having difficulty: we are running a windows server 2003 - mail and outlook support 2007 and upwards, how do I get the brand new apple machines to work with the 2003 version of server

I am having difficulty: we are running a windows server 2003 - mail and outlook support 2007 and upwards, how do I get the brand new apple machines to work with the 2003 version of server

I may be way out, but do you know about this product, would it help integrate the Macs for you.
https://www.thursby.com/sites/default/files/images/ADmitMacv8_SPD.pdf

Have tried to install icloud 4.0 for windows and again it does not allow syncing with outlook 2013 calendar and contact using windows 8.1 and IOS 8.02 (unexpected error)? I thought itunes 12.0 and icloud 4.0 would solve issue but still same result.

I have tried to install icloud 4.0 for windows and again is does not allow syncing with outlook 2013 calendar and contact, using windows 8.1 and IOS 8.02 (get - unexpected error)?

Having same issues. had been syncing every few days with outlook 2007 contacts and calendar but since updated to 4.0.2 and latest itunes I get an error that it is unable to sync. I can't seem to find any solution.

Migration on windows server 2003 to 2012 r2 by using IIS 6.0 what are parameters are changed means supported and non suported parameters and configurations?

In my project am going to migrate windows server 2003 to 2012 r2 by using IIS 6.0? what are the parameters are changed and what are the parameters are not supported and what are the modules need to change?
Please give the related answer as soon as posssibule. that is more help for me?
Thanks,
vamsikrishna.

1. This seems to be incomplete description.
2. You can enable legacy technologies while installing roles and features.
3. For application pool(s) you should consult respective developer/vendor team(s) for help.
Regards
Milos

Does DPM 2012 R2 with rollup 2 support any version of Windows Server 2003/2008 on Hyper-V?

Similar Messages

Maybe you are looking for