Does GTC generate default value for Password attribute.??

I am using GTC as trusted source reconciliation.
My doubt is if I don’t map the password attribute does it generate default value to the password attribute in user form??
I have a random password generator in pre-insert, first i tried as below which didn't work later after updating it worked fine.
IF (password=null)
Generaterandampassword
SetPassword= Generaterandampassword
If i use adapter as above it not generating random password. i see that password as 'temp' to all the users.
I am thinking gtc generates a value to password filed even if we don't pass any value... am i right?? Please let me know..
Thanks..
Edited by: IDMuser19 on Aug 17, 2010 10:30 AM

Hey,
See if this helps.......
http://www.oracle.com/technology/obe/fusion_middleware/im1014/oim/obe12_using_gtc_for_reconciliation/using_the_gtc.htm
Regards,
Sunny Ajmera

Similar Messages

Migration issue on default value for transient attribute in 11.1.2

Experts,
I migrated my JDev 11.1.1.5 project to JDev 11.1.2. After successful migration i began to run the project and it ran without issue. In the application however when i clicked on any link or button i get the following exception
oracle.jbo.JboException: JBO-29000: Unexpected exception caught: java.lang.NullPointerException, msg=Cannot get property 'saleType' on null object
Caused by: java.lang.NullPointerException: Cannot get property 'saleType' on null object
     at org.codehaus.groovy.runtime.NullObject.getProperty(NullObject.java:56)
     at org.codehaus.groovy.runtime.InvokerHelper.getProperty(InvokerHelper.java:154)
     at org.codehaus.groovy.runtime.callsite.NullCallSite.getProperty(NullCallSite.java:29)
     at org.codehaus.groovy.runtime.callsite.AbstractCallSite.callGetProperty(AbstractCallSite.java:237)
     at bc4j_com_xxx_portal_model_uiView_SaleVO_SaleTypeTransient_null_gs.run(bc4j_com_xxx_portal_model_uiView_SaleVO_SaleTypeTransient_null_gs.groovy:1)
     at oracle.jbo.ExprEval.internalEvaluateGroovyScript(ExprEval.java:1200)
In my SaleVO i have a transient attribute whos value is set as
adf.userSession.userData.saleType == 'ORGANIZATION' ?
                           'LOV_PartyTypeOrg' : 'LOV_PartyType'When i print the value from user session i am getting a value there, so a bit confused about the NPE here.
Please advice
Jdev 11.1.2

Hi,
this is something you should report to customer support to have them looking at this and helping you out
Frank

ADF 10.1.3 - Default value for radio button

Hi
How to set the default value for Radio button?
I have Yes and No fixed values for a radio button, and couldn't find any option to set the default value.
How can I set Yes as default value?
Appreciate your help.

FrameworkSpl,
What are you using for the model layer? If you are using ADF Business Components, simply set the default value for the attribute upon which you are basing the radio buttons.
John

Default value for attribute "COUNTRY" in BP_HEAD_SEARCH/MainSearch

Hi Gurus,
Requirement is to set default value for attribute "COUNTRY" in BP_HEAD_SEARCH/MainSearch when user clicks on Corporate Account.
Below is code that i have written in DO_PREPARE_OUTPUT.
Code is working fine and in the debug also i can see the value of COUNTRY is set to DE, but it is not showing on the screen for first time but when i load component second time(Refresh the screen), it shows me value.
Any help would be appreciated. If somebody has otheralternative kindly share.
CALL METHOD super->do_prepare_output( iv_first_time = iv_first_time ).
Calling Super Method
CALL METHOD super->do_prepare_output
   EXPORTING
     iv_first_time = abap_true.
Data Declatation
DATA :lr_col            TYPE REF TO if_bol_bo_col,
        lr_current        TYPE REF TO if_bol_bo_property_access,
        lr_param          TYPE REF TO if_bol_bo_property_access,
        lr_qs             TYPE REF TO cl_crm_bol_dquery_service,
        lv_attr_name      TYPE name_komp,
        lv_sign           TYPE bapisign,
        lv_option         TYPE bapioption,
        w_country_exist   TYPE c,
        w_param           TYPE string,
        w_value           TYPE string,
        w_flag            TYPE c.
Getting SEARCH Context Node
lr_qs ?= me->typed_context->search->collection_wrapper->get_current( ).
Get Selection Parameters
lr_col ?= lr_qs->get_selection_params( ).
Start from first parmaters
lr_current = lr_col->get_first( ).
Clearing Variables
CLEAR : w_country_exist, w_flag, w_param, w_value.
Loop till we have selection paramters
WHILE lr_current IS BOUND.         " While loop 1
checking attribute name is COUNTRY then setting some variable
    w_param = lr_current->get_property_as_string( 'ATTR_NAME' ).
    CASE w_param.
      WHEN 'COUNTRY'.
If country is filled then setting variable
        w_value = lr_current->get_property_as_string( 'LOW' ).
        IF w_value IS NOT INITIAL.
          w_country_exist = abap_true.
        ENDIF.
When we got COUNTRY attribute then setting flag
        w_flag = abap_true.
    ENDCASE.
Calling next parameter
    lr_current = lr_col->get_next( ).
ENDWHILE.                          " While loop 1
In below block we are checking is COUNTRY attribute is blank and
we have found COUNTRY attribute in current selection paramters
IF lr_qs IS BOUND.                 " SEACRCH CONTEXT BOUND
If vairable is blank means DE or any other value is not filled in COUNTRY Attribute
    IF w_country_exist IS INITIAL.   " w_contry_exist
We have to add selection attribute if we come accross COUNTRY attribute during our search
      IF w_flag EQ abap_true.        " w_flag
Adding COUNTRY attribute with default value 'DE'
        lr_qs->add_selection_param( EXPORTING iv_attr_name = 'COUNTRY'
                                              iv_sign      = 'I'
                                              iv_option    = 'EQ'
                                              iv_low       = 'DE' ).
      ENDIF.                         " w_flag
    ENDIF.                           " w_contry_exist
ENDIF.                             " SEACRCH CONTEXT BOUND
In below block we will remove COUNTRY attribute when it has blank value
IF lr_qs IS BOUND AND w_country_exist IS INITIAL.
    lr_current = lr_col->get_first( ).
    WHILE lr_current IS BOUND.
      w_param = lr_current->get_property_as_string( 'ATTR_NAME' ).
      CASE w_param.
        WHEN 'COUNTRY'.
          w_value = lr_current->get_property_as_string( 'LOW' ).
          IF w_value IS INITIAL.
            lr_col->remove( iv_bo = lr_current ).
          ENDIF.
      ENDCASE.
      lr_current = lr_col->get_next( ).
    ENDWHILE.
ENDIF.
Edited by: Harsharandeep Singh on Apr 28, 2011 3:44 PM

Hi,
Try it like this:
DATA:
    lr_bo        TYPE REF TO if_bol_bo_property_access ,
    lv_attr_name TYPE name_komp.
FIELD-SYMBOLS:
    <ls_param>   TYPE crms_thtmlb_search_criterion.
READ TABLE parameters
       ASSIGNING <ls_param>
       WITH KEY field = 'COUNTRY'.
IF ( sy-subrc = 0 ).
    <ls_param>-value1 = ip_pfct.
ENDIF.
CHECK ( me->parameter_collection IS NOT INITIAL ).
lr_bo = me->parameter_collection->get_first( ).
WHILE lr_bo IS BOUND.
    CALL METHOD lr_bo->get_property_as_value
      EXPORTING
        iv_attr_name = 'ATTR_NAME'
      IMPORTING
        ev_result    = lv_attr_name.
    IF lv_attr_name EQ 'COUNTRY' .
      CALL METHOD lr_bo->set_property
        EXPORTING
          iv_attr_name = 'LOW'
          iv_value     = 'DE'.
      EXIT.
    ELSE.
      lr_bo = me->parameter_collection->get_next( ) .
    ENDIF.
ENDWHILE .
Kind regards,
Micha

Is there any way we can set default value for a Date Attribute to current date in Master Data Services

Is there any way we can set default value for a Date Attribute to current date in Master Data Services.
I as well wants to know that is there any posibility to show Calendar control while input data into respective date attributes.
Thanks.

Hi Anagha,
So far i havent found any way to set todays date by default from MMI, but i guess this flow should work as workaroud
1. Add buisness rule which can set a default value when Date = NULL/Blank
2.get the entity table ,use -select EntityTable from mdm.tblEntity where Name = '<enter entity name>'
3.Go to that table and add a after update trigger like
if uda_<entityid>_<attributeid(Date attribute)> = default value
update uda_<entityid>_<attributeid(Date attribute)> =getdate() where id = <LastUpdatedRow>
I will check on this too from my side.
By the way AFAIK i dont think so calendar control integration is possible .

Default value for period indicator in MM01

Hello Gurus,
I have created a transaction for maintaining default value for period indicator in MM01 transaction. User has to maintain the period indicator for Material Type(MTART) and Plant(WERKS) before creating a material master. If it is not maintained, then error message will be generated saying that 'Maintain Period indicator for the Plant and Material Type'.
I have created an implementation for that in 'Y_BADI_MATERIAL_REF'. For Material type 'FERT' it is working fine.
But when i try to create a material of type 'RAW1' , im getting a error that 'Mandatory field Profit center is missing' which is already entered in the material master and is not in the part of forecast view i have created.
During my second testing, i got a different error MRP group 'Y0Y3' is not valid, though i entered it using F4 help.
When i commented my piece of code in the implementation, error disappeared..
Im very new to MM, please help me out gurus..
Thanks in advance.

Thanks for your reply.
I know that it can be made as optional entry in OMS9 transaction. But when i deactivated my BADI, that error disappeared.
Is there any relation between the period indicator and profit centre ?
And also while creating a material, when i select the MRP group from the dropdown list(F4), whatever the group i select, im getting an error 'MRP group does not exists'. But when i deactivated my BADI, it disappeared.
Im really confused why am I getting such errors because of this BADI.
Please help me out...

Default option for password in UME

Hi,
Is there a way that when we create new users in UME, that the default option for password management is set to "Disabled Password" in stead of "Define Initial Password".
We are using SPML SOAP message to create the users and if there is no password in the SPML messgae, the user is created, but no logon is possible as the system expects that you should have a password.
We will like to avoid sending in the password as part of user creation process, as these users will have to be created with no password. These users will never do a basis authentication, but are needed for SSO using HTTP header variable..
Thanks,
Vikrant sud

Is this a portal or what?
On the ABAP side this is possible, so I would expect the Java APIs to offer the same.
Looking in the PASSWORD structure is the wrong place, try the LOGONDATA (if it is done the same way). If you activate it in the call it should delete the PASSWORD regardless.
Sorry, I have an ABAP mentality... but consistent APIs make it easier (to have to understand less concepts) and SAP increasingly does this.
Cheers,
Julius
Edited by: Julius Bussche on Nov 19, 2009 9:47 PM

How to set default value for vc2_255_arr in plsql parameter directive?

Hi,
I would like to set a default values for a plsql parameter which is of vc2_255_arr type. How to do that?
Below is the example from PL/SQL Server Page.
+" To set a default value, so that the parameter becomes optional, include a default="expression" attribute in the directive. The values for this attribute are substituted directly into a PL/SQL statement, so any strings must be single-quoted, and you can use special values such as null, as in the following example:+
+<%@ plsql parameter="p_last_name" default="null" %> "+
My plsql parameter is p_arr which is of "TYPE vc2_255_arr IS TABLE OF VARCHAR2(255) INDEX BY BINARY_INTEGER"
*<%@ plsql parameter="p_arr" type="PMP_LIB.VC2_255_ARR" %>*
Thanks in advance!
kwong

My plsql parameter is p_arr which is of "TYPE vc2_255_arr IS TABLE OF VARCHAR2(255) INDEX BY BINARY_INTEGER"You need to declare it in a package specification and initialize in the package body:
SQL> create or replace package pmp_lib
as
   type vc2_255_arr is table of varchar2 (255)
                          index by binary_integer;
   vc2_255_arr_default   vc2_255_arr;
end pmp_lib;
Package created.
SQL> create or replace package body pmp_lib
as
begin
   vc2_255_arr_default (1) := 'abc';
   vc2_255_arr_default (2) := 'def';
end pmp_lib;
Package body created.
SQL> declare
   arr   pmp_lib.vc2_255_arr := pmp_lib.vc2_255_arr_default;
begin
   for i in 1 .. arr.count
   loop
      dbms_output.put_line (arr (i));
   end loop;
end;
abc
def
PL/SQL procedure successfully completed.so in your case it would probably be sth like (assuming pmp_lib is a package):
<%@ plsql parameter="p_arr" type="PMP_LIB.VC2_255_ARR" default = "PMP_LIB.vc2_255_arr_default" %>

How to set a default value for particular field in SRM PO Portal

Dear Gurus,
Im desparetly need a help in web dynpro on how to set a default value for a field(flag) in PO header tab in portal.
My requirement is whenever the user press the edit button in PO screen,automatically a flag field should be set as abap_false.
I dont think this will handle in check badi or change badi. i tried this part in onbuttonpressed overwriteexit in CNR_VIEW views,i can get the function EDIT in debugging mode,but dont know how to proceed further.....
Many of them suggested to go with get attribute and set attribute for changing any particular field in web dynpro,but im not very familiar in using those get and set attributes.I request you people can give me sample code on how to identify my target field in the node and set the values while pressing EDIT Button.
Thanks in advance...
Regards,
Sathish

Dear Laurent,
Thanks for your response,
But i searched in enhancement spot of WD_BADI, but couldnt get the exact way to change the coding,
My real requirement is, that particular flag should be enable and disable dynamically by checking a condition in my header values.So in that case i dont know how to proceed further to handle in the PO screen.
Kinly guide me how to get the particular node of field in the Purchase order screen.
Thanks you in advance,
Sorry for the inconvenience if any
Regards,
sathish

Setting default value for a jcombobox based on the value not the index

I am trying to set the default value for my combobox to the current year. One way I thought of doing it was to get the index of the value representing the current year and then use setSelectedInex to make it the default. Any ideas?
The relevent section of code is below.
GregorianCalendar gregorianCalendar = new GregorianCalendar();
int year = gregorianCalendar.get(Calendar.YEAR);
String currentyear = year + "";
int startyears = 2000;
int numyears = 25;
JComboBox endyearcombobox = new JComboBox();
endyearcombobox.setBorder( BorderFactory.createLineBorder(Color.DARK_GRAY));
endyearcombobox.setFont(standardfont);
endyearcombobox.addActionListener( new ActionListener() {
public void actionPerformed( ActionEvent event ) {
endyearcombobox = ( JComboBox )event.getSource();
endyear = endyearcombobox.getSelectedItem();
boolean same = endyear.equals(oldItem);
oldItem = endyear;
String[] endyearlist = new String[numyears];
for(int i = startyears; i < startyears+numyears; i++){
String item = new Integer(i).toString();
endyearcombobox.addItem(item);
Thanks
Ged

Thanks mate,
That was what I was looking for. I still had a little more manipulation to do, but sent me on the right track and have got it working now. I don't know why I didn't think of it in the first place.
Ged

Default value for Read-Only Picklist Field

Hi, all--
I would like to have a default value ("Undetermined") for the "Associated Account" read-only picklist value. I have an account record of this value for this purpose. This is because if there is no value in the field, the record will not be included in a report that includes the field. I do not want to make the field required at this point.
Field management doesn't appear to allow any default value for read-only picklists. Does anyone know how to get around this, either at the lead record stage or at the lead report stage (without resorting to an analytic, which won't work for what we are doing)?
Thanks.

That's a great question. It doesn't appear as though you can select it from the typical method of Admin | Application Customization | Lead | Lead Field Setup | Associated Account.
Have you tried creating a workflow to populate the field using Before Modified Record Saved?

Account Creation - Badi for Default values for BP Role and Sales Area

Hi all,
my requirement regards the possibility to create a new prospect (a link should be available in the navigation bar or create section).
Logically, a bp role as "Prospect" and particoular sales area should be created automatically.
I created an implementation for the BADI definition "BADI_CRM_BP_UIU_DEFAULTS". But don't know how to create the default values for BP role and Sales area:
In my code
assign cr_me->('VIEW') to <lv_view_name>.
if sy-subrc ne 0.
exit.
endif.
lv_viewname = <lv_view_name>.
case lv_viewname.
when 'AccountDetails.htm'.
I obtain the viewname "AccountDetails" , the related context "Header". After I don't know how to proceed to obtain the related entities through the relationship BuilRolesRel and BuilSalesArrangementRel.
Am I following the right way? Is there another solution to prepare the output for default values?
Any kind of suggestion will be appreciated.
Regards, Roberto

go to spro>cross-application components>sap busines partner>business partner> basic settings>field groupings>Configure Field Attributes per BP Role
Double click the business role which you want to customaze (e.g. 'A') and change the proper settings.
Regards.

Setting default values for field on screen.

Hello,
I am trying to set default value for one of the fields I have on screen when I execute the custom transaction.
I am doing that in PBO as follows. But the default value is not set for Date field.
PROCESS BEFORE OUTPUT.
MODULE PBO_OUT.
MODULE STATUS_5000.
*&      Module STATUS_5000 OUTPUT
      text
MODULE STATUS_5000 OUTPUT.
SET PF-STATUS 'NON_SAP_DOCUMENT'.
SET TITLEBAR '001'.
ENDMODULE.                 " STATUS_5000 OUTPUT
*&      Module PBO_OUT OUTPUT
      text
MODULE PBO_OUT OUTPUT.
ERDAT = SY-DATUM.
ENDMODULE.                 " PBO_OUT OUTPUT
Please help.
Thanks.
Regards,
Rajesh.

Works Now...

Default Values for Select-options In Webdynpro-ABAP

Hi Freinds,
Kindly,Help me in setting the Default values for the Select-options in Webdynpro ABAP.
Here the Node and the Attributes are Created Dynamically, and then Displayed Select-options Component View.
Regards,
Xavier.P

Xavier Reddy Penta sent me this question via email and I answered it directly yesterday. Here is the solution that I provided to him, so that it is stored with the original question:
I believe your problem is that you are not setting the value into the range correctly. You are setting it directly into the field symbol of the range like such:
<FS> = L_STRING2.
But ranges are deep objects. They have four fields: Sign, Option, High, and Low. This is from the online help:
1.     sign of type c and length 1. The content of sign determines for every row whether the result of the condition formulated in the column is included or excluded in the entire resulting set for all rows. Evaluable values are "I" for include and "E" for exclude.
2.     option of type c and length 2. option contains the selection option for the condition of the row in form of logical operators. Analyzable operators are "EQ", "NE", "GE", "GT", "LE", "LT", "CP" and "NP" if column high is initial, and "BT", "NB" if column high is not initial. With the options "CP" and "NP", the data type of the columns low and high must be of the data type c, and special rules apply for entries on the selection screen.
3.     low of the data type defined after FOR. This column is designated for the comparison value or the lower interval limitation.
4.     high of the data type defined after FOR. This column is designated for the upper interval limitation.
So when you are moving the value into the field symbol you are setting it into the sign column.
Here is an example of how you can access the components of the range:
* create a range table that consists of this new data element
    lt_range_table =
      wd_this->lv_sel_handler->create_range_table(
           i_typename = l_typename ).
    IF l_fieldname = 'CARRID'.
      FIELD-SYMBOLS: <tab>         TYPE INDEX TABLE,
                         <struct>      TYPE ANY,
                         <wa>          TYPE ANY,
                         <option>      TYPE char2,
                         <sign>        TYPE char1,
                         <high>        TYPE ANY,
                         <low>         TYPE ANY,
                         <wa_values>   TYPE ANY.
      ASSIGN lt_range_table->* TO <tab>.
      APPEND INITIAL LINE TO <tab> ASSIGNING <wa>.
      ASSIGN COMPONENT 'OPTION' OF STRUCTURE <wa> TO <option>.
      ASSIGN COMPONENT 'HIGH' OF STRUCTURE <wa> TO <high>.
      ASSIGN COMPONENT 'LOW' OF STRUCTURE <wa> TO <low>.
      ASSIGN COMPONENT 'SIGN' OF STRUCTURE <wa> TO <sign>.
      <sign> = 'I'.
      <option> = 'EQ'.
      <low> = 'AA'.
    ENDIF.

Default values for

Hi,
I am trying to load a datafile to a table using SQL*loader, how can I assign the default values for a coulmn in control file of sql loader, here are datafile and target table i am using
datafile
empid,empname,empdept
1001,clark,123
1002,Mike,123
1003,john,123
1004,bryan,123
desc emp_table
empid number(10)
empname varchar2(30)
empjob varchar2(20)
empdept number(10)
empmgr number(10)
The datafile has the data for only 3 columns in emp_table, there is no data for empjob and empmgr in the datafile.I would like to use default values for them empjob = sales and empmgr = 2001, so how can I set these default values in the control file.
Thanks in advance!!

The simplest way is to forget about passing default values in control file. Create table just for this load with DEFAULT constraint for missing columns and load file in this newly created table. Let's call it LDR_TBL. Then "INSERT INTO EMP_TBL SELECT * FROM LDR_TBL; " Make sure you define control file as follows (skipping empjob and empmgr). Oracle will populate "empjob, empmgr" with 'sales',2001 as part of column constraint.
load data
infile 'x.txt'
into table emp_table
fields terminated by ',' optionally enclosed by '"'
(empid,empname,empdept)
When all is done, DROP TABLE LDR_TBL ;
Does this help ?

Does GTC generate default value for Password attribute.??

Similar Messages

Maybe you are looking for