Does Imovie have the same features on an Ipad2 as it does on an Imac?
i need to upload videos from the internet, clip them, add my own videos, in order to make the movie omplete. Can i do this on an ipad2 with Imovie, or do i need to use an IMac?
I don't think iMovie can pull movies of the Internet. You might need to use a different program, then import into iMovie on the iPad (iMovie for iOS). It might be easier to accomplish all these steps on an iMac as I don't know what conversion programs for downloaded videos are available for iOS on the iPad. On the Mac everyone on the iMovie Discussion Group recommends MPEG Streamclip for doing conversions that are compatible with iMovie.
There is also an iMovie on iOS group you could post this question in maybe get a better answer from folks using iMovie on iOS, as this is the general desktop iMovie Discussion Group. You can find that group at this link:
iMovie on iOS - Discussions (323)
Similar Messages
-
Does Imovie have the same capabilities on an Ipad2 as it does on an Imac?
I am learning how to use Imovie, and i would like to be able to pull clips from movies, newscasts, and youtube, if i can, and use them in my own original videos,(similar to what The Liberal Viewer on Youtube does) then post them to my Youtube channel.
I need a better Imac, mine is about 6 years old and Imovie shuts itself down while i am using it. I was considering keeping it though, since it works ok for my basic needs, and perhaps getting an Ipad2 for movie making. But i am a novice on computers and was wondering if it would be easier for me to learn Imovie on a MAc. Thanks!No they are separate applications. The iMovie on iPad is pretty basic and really optimized for footage taken with an IOS device.
If you are only interested in really basic editing and using footage from say the iPad then you should be OK. -
Cat0-3750 upgrade. Error: system number 1 does not support the same feature
I am trying to upgrade or rather downgrade from ipadvservices (inadvertently upgraded to) to ipservices on a stack of Cat-3750s, but I get the following error message:
Ios Image File Size: 0x00877A00
Total Image File Size: 0x00B04200
Minimum Dram required: 0x08000000
Image Suffix: ipservicesk9-122-37.SE1
Image Directory: c3750-ipservicesk9-mz.122-37.SE1
Image Name: c3750-ipservicesk9-mz.122-37.SE1.bin
Image Feature: IP|LAYER_3|PLUS|SSH|3DES|MIN_DRAM_MEG=128
Error: The image in the archive which would be used to upgrade
Error: system number 1 does not support the same feature set.
Any ideas?
ChrisI was having the same issue even with entering the following:
archive download-sw /overwrite /allow-feature-upgrade tftp://172.18.108.26/c3kx-sm10g-tar.150-2.SE7.tar
I noticed the image which was running on the switch was correct without the ".bin" at the end:
3560#sh ver | i image
System image file is "flash:c3560e-universalk9-mz.150-2.SE7"
I uploaded a fresh IOS image from CCO and made sure the image name had ".bin" at the end. Seems trivial except the error is produced through a sanity check. See below (please excuse the extra unplugging in the output):
3560#sh ver | i image
System image file is "flash:c3560e-universalk9-mz.150-2.SE7.bin"
3560#$de tftp://172.18.108.26/c3kx-sm10g-tar.150-2.SE7.tar
Loading c3kx-sm10g-tar.150-2.SE7.tar from 172.18.108.26 (via Vlan1): !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!
Mar 30 01:33:35.480: %USBFLASH-5-CHANGE: usbflash0 has been removed!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Mar 30 01:34:15.636: %PLATFORM_ENV-1-FRU_PS_ACCESS: FRU Power Supply is not responding!!!!!!!!!!!
[OK - 24893440 bytes]
Loading c3kx-sm10g-tar.150-2.SE7.tar from 172.18.108.26 (via Vlan1): !!!
Mar 30 01:34:35.593: %PLATFORM_ENV-6-FRU_PS_OIR: FRU Power Supply 2 removed!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
examining image...
extracting info (100 bytes)
extracting c3kx-sm10g-mz.150-2.SE7/info (499 bytes)
extracting info (100 bytes)
System Type: 0x00010002
Ios Image File Size: 0x017BDA00
Total Image File Size: 0x017BDA00
Minimum Dram required: 0x08000000
Image Suffix: sm10g-150-2.SE7
Image Directory: c3kx-sm10g-mz.150-2.SE7
Image Name: c3kx-sm10g-mz.150-2.SE7.bin
Image Feature: IP|LAYER_3|MIN_DRAM_MEG=128
FRU Module Version: 03.00.78
Updating FRU Module on switch 1...
Updating FRU FPGA image...
FPGA image update complete.
All software images installed.
Worked for me, hope this helps. -
I have 4s. After I updated ios7.0.3 my wifi is geyed out. I expected after ios7.0.4 update wifi will work again, but does not. It annoying, because I have to use my data... Does anyone know when it will be fixed or does anyone have the same problem?
I have the same problem. After the upgrade, my wifi is greyed out, and the battery won't hold a charge long. I reset all the settings, tried all the things suggested by Apple, but it didn't work. I took the phone to Verizon, but they said they can't fix it, go to Apple
I made an appointment at the Genius bar, where the staff was incredibly rude and dismissive. A representative told me that the wi-fi is broken and I would need to buy a new phone for $200, because mine is out of warranty. I'm due for an upgrade in a few months, so I'm not going to pay $200 for another 4S now. I'm also not going to buy any more Apple products. Their upgrade caused this problem, and they are not standing behind their producet. -
PSE 8 for windows, does it have the same smart brush tool than for MAC version?
Good Morning
PSE 8 for windows, does it have the same smart brush tool than for MAC version?Yes, it does.
Thanks, -
Firefox causes crash when using Youtube explorer does not have the same effect
firefox causes crash when using Youtube explorer does not have the same effect
Troubleshooting extensions and themes
* https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes
Check and tell if its working. -
Hi, I updated my iPhone 4 from iOS 5.1 to 5.1.1 and now it won't connect to 3g, it only gets EDGE, does anyone have the same issue? Anyone knows how to fix it? Thanks
Yeah, it´s happening in normal 3g coverage area, in fact, i used the 3g to download the iOS but after installing it, the phone doesn't get the 3g anymore.
I tryed the reboot pocess, but it didn't fix it
I haven't tryed the restore to factory settings process,
Is there a way to downgrade to iOS 5.1 again?
Thaks -
After reïnstalling Sygic Europe I don't get to download the map content.
Does anyone have the same problem?Hi, I have the problem too. Did you find a solution ?
-
Ever since I upgraded my iMac to the latest software I can't seem to burn any cd's does anyone have the same problem?
Care to share which latest software you installed?
-
After upgrading to ios 8.2, my keyboard on my iphone 5s is weird. When i typing a sms, the screen is locking it self. Does somebody have the same problem? Sorry for my bad english...
Hello Wexxwoxx,
Welcome to the Apple Support Communities!
I understand that after you updated to iOS 8.2, while typing a message your iPhone seems to be locking itself. In this situation, there are a couple of different troubleshooting steps that I would recommend.
First, I would suggest closing the Messages application completely by using the instructions in the attached article below.
Force an app to close in iOS - Apple Support
After the Messages app is closed, I would recommend resetting your iPhone using the instructions in the next attached article. After the reset, open Messages fresh and attempt to use as you normally would.
Restart or reset your iPhone, iPad, or iPod touch - Apple Support
Have a great day,
Joe -
Since I upgraded my iPad 3 to IOS6 my safari just quits unexpectedly. Does anyone have the same problem?
Try This...
Close All Open Apps... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430 -
download of OSX 10.9.2 stops at 351.7MB, does anybody have the same experience?
http://www.apple.com/support/mac/app-store/contact/
-
I just updated my Iphone 4 for IOS5. The photo lybrary just duplicated after sync. Does anyone have the same problem?
Try this
https://discussions.apple.com/message/15135297#15135297 -
Last update for OS 10.8.2 caused big problems with HP photosmart B110 printer /scanner cannot scan does anyone have the same problem or a solution?
iMac is connected via wirelss to printer/scanner. All was working OK until update.Assuming that the HP software is up-to-date, but still not working, have you tried Image Capture in the Applications folder. Does that work?
-
They will have the same features once the iphone 5 comes out they will both have ios 6 , passbook, panerama mode, ect. The iphone 4s just cost less. im not worried so much about the screen size i just want to know some opinions. And what color is good for a guy to get?
That is your decision.
The 5 has a faster processor, more RAM, and a larger screen. The biggest difference is LTE.
Buy whatever fits your budget and needs.
Personally I just got a 32GB 4S on closeout from AT&T for $199... to me it was worth saving $100 over a similar iPhone 5.
Color is your choice, again my personal opinion is white electronics are hideous. Many will disagree with me on that, but I cannot help that they have bad tastes.
Maybe you are looking for
-
Semantic Partitioning Delta issue while load data from DSO to Cube -BW 7.3
Hi All, We have created the semantic partion with the help of BADI to perform Partitions. Everthing looks good, first time i have loaded the data it is full update. Second time i init the data load. I pulled the delta from DSO to Cube . DSO is stand
-
HP Laserjet Pro 400 MFP M425dn for Windows XP Profesional SP 3 not installed
At the beginning of the installation appears error message "HP CSI Shell - found an error" but the installation continues, but after a few seconds the following message appears "HP installer - found error". The installation continues, and soon appear
-
BPM Process not able to view in NWA
Hi, I have downloaded and installed the trial version of NWDS and CE ehp1 server from SDN. The server is up and running. I am able to create the sample BPM process and build and deploy in the server. In order to start the process, if i open NWA and c
-
Can't release transports - timeoutduringallocate/CPIC-CALL
When I try to release a transport, I get the message: >Could not start transport control program tp (TP608), >There was an attempt to start the transport control program tp using the local RFC interface. An error >occurred here. > >Error code: 4 >RFC
-
Lost my contacts, how to transfer from macbook pro to ipad
lost my contacts, how to transfer from macbook pro to ipad