Does iTunes have a log?

I just moved from a PC to an iMac (I should have done this years ago!!!).
I'm syncing my iPod Touch for the first time on the iMac and I see iTunes removing old apps.
Is there a log somewhere where I can see what it deleted?

I believe if you haven't already setup an itunes account, if you have access to computer with iTunes installed , you can create an iTunes account on that computer with no credit/debit card and then just buy iTunes cards at your local retailer to get credits.

Similar Messages

HT1911 Why does Itunes have me logging in multiple times to buy a song? Somehow, my account got disabled now. It also shows that I am logged in....?

Why does itunes have me logging in multiple times to buy a song? I can access everything else fine, but now my account is disabled for some reason although my password was entered correctly... help

I've seen a couple of other threads over the last 10 minutes posting similar problems, so it appears to have affected other people as well - the poster on the first thread has now posted again saying that it's now working for him, so you could give it another try.
Edit : your reply appeared as I was attempting to post this

I replaced my iPhone with a Galaxy 5 and am not receiving all of my text messages. The sales person told me to remove my phone number from iTunes to stop this from happening. Is that true? What does iTunes have to do with text messages?

I replaced my iPhone with a Samsung Galaxy5 and I am not receiving all of my text messages now. The rep at the store told me to go to iTunes and take my phone # off of the account and that would fix the problem. Is that true? What does iTunes have to do with text messages anyway?

You need to remove your phone number from the iMessage system.
Read here: http://support.apple.com/kb/ts5185
~Lyssa

HT4335 Does Itunes have a solution for playing music in a business setting?

Does Itunes have a solutions for playing music in a business setting? Can you play your downloaded music in a business-overhead speakers?

Presuming you are referring to the iTunes Store, tracks purchased from that service are for personal use only and are not licensed for use in any commercial setting. You will need to either find a commercial service to provide music (easiest by far, though perhaps not the cheapest), or buy the appropriate CDs and then obtain a license from the various rights clearinghouses for playback in commercial use.
Regards.

Does iTunes have any hidden picture controls for video playback (e.g. contrast, brightness) ?

Does iTunes have any hidden picture controls for video playback (e.g. contrast, brightness) ?
I haven’t been able to find any.
Since the .m4v file type appears to prevent any video bought or rented from the iTunes Store from being played using any other program the lack of these picture controls - if indeed they are lacking - make it seriously deficient as a video player.

Thanks for the rapid response to my enquiry.
I know that it’s possible to adjust the monitor’s performance via System Preferences but it is rather long-winded and I’d rather not alter the settings for the entire screen (and then have to change them all back once finished) when it’s only the video playback window that needs adjustment.
Since iTunes provides various options using the Equalizer for adjusting sound playback it seems rather odd that they don’t have a similar panel for video.
Regarding QuickTime.
Apparently earlier versions (such as 7) had picture controls but the current version (10.4) does not.
I assume Apple are phasing out QT whose development seems to have stopped - or rather gone backwards since it now lacks capabilities it once had - and intend in future to treat iTunes as their universal media player which no doubt makes sense from their point of view.
I wasn’t aware of the .m4v file type when I made my first and probably last video purchase via iTunes yesterday and didn’t realise that it would restrict my options for playback so completely.
The experience has really put me off buying any additional video from the iTunes Store.
Back to DVDs.

Does iTunes have to be installed to use the shuffle in disk mode?

I have read through the string titled 'Ipod only recognized as "unknown device" '.
I have the same problem, however I ran into an issue where iTunes would not start so I uninstalled the program.
I was wondering, does iTunes have to be installed or running for the shuffle to operate in disk mode ot should the shuffle act as a normal jump drive regardless?

Also, I found this Apple article that relates http://docs.info.apple.com/article.html?artnum=303553. This is true for all Intel Macs, not just the Macbook Pro. It also confirms my earlier position, but is vague as to how much faster it is. Ideally, we'd all have 2 Gigs with paired 1 Gig modules.
A quick google search will reveal that the boost is fairly small, but noticable in situations where performance is limited by memory bandwidth. Keep in mind having less memory reduces performance signifcantly, if you run out of memory and more pageouts / virtual memory usage is required. Virtual Memory is orders of magnitude slower than regular memory, think Nanoseconds vs. Milliseconds.
So 1.25 Gigs might be better than 1 Gig for that reason, regardless of if its single-channel or dual-channel. It all depends on how you use computer, but like I said above, I'd just go for what's cheaper in this case.

Does iTunes have on demand streaming?

Does iTunes have music streaming on demand?

Thank you. I think with Spotify, for $25 per year, one can select and listen to any one particular song at any time. That's what I meant by on-demand streaming. Does iTunes have anything like that?

Does iTunes have or is there an app to see beats while a song is playing?

Does iTunes have or is there an app to see beats while a song is playing?

Thank you, but both of those would be a financial overkill as well I believe (for an occasional once a year need).
I actually designed another flyer with a curved headline about 2 years ago, but saved it simply in a .jpg format (because it was emailed) and cannot remember how I actually did it! It opens now in Preview (default) and get info doesn't tell me which app was used to create it. I've already tried each and every app I have and it's driving me bananas.

Does iTunes have speaker balance controls?

I am experiencing the problem where the left speaker (or headphones) is much louder than the right speaker. I've already tried it on 3 different headphones, a surround sound system, and a Creative iTrigue and I still only get most of the sound out of the left side than the right.
What gives? Is it my hardware or the software?
Thank you!

iTunes does not have balance controls.
Go to system Preferences>Sound>Output to set the balance.
If the setting has drifted from its own (like it did on my system), install balanced.
Hope this helps.
M
17' iMac 800 MHz, 768 MB RAM, 200 GB HD, DL burner Mac OS X (10.4.8) iTunes 7.0.2

IMDSO does not have change log

Hi
IMDSO in HANA does not contain Change log table, how it can handle delta functionality when we have generic data source in DXC.
How delta mechanism work in HANA , when we use BW data sources (AIE, ABR,AIM)

Santosh,
Please look at following thread to see how delta functionality works:-
BW on HANA: Working of In-Memory DSO
You can also refer
SAP BW on HANA Cookbook
Kulwinder

Does iTunes have a default password for initial encrypted backups?

I have an iPhone that was connected to iTunes for the first time today. It is a company device and IT has set a policy to require backups to be encrypted.
When I first plugged the phone in, iTunes automatically did a backup as it had never seen the device before. Due to a software issue, Apple recommended that I do a restore to factory settings and then restore from backup, so once the initial backup was completed, I performed the restore to factory just fine. However, when I attempted to restore from backup, I was prompted for a password even though I was never prompted for a password when iTunes created the backup. I have tried every password I can think of including my company domain password, iTunes password, iPhone passcode, etc...etc...to no avail.
Does anyone know if there is some default password that iTunes using when doing an initial backup without prompting the user for a password?

Caronold -
I have the same problem when i updated to iOS6 3days ago from iOS5.1.1. I've tried every passwords i can think of but NO luck.
Even the folks at genious bar said : good luck!!
A Third party software that can decrypt?

Why does iTunes make me log in every time I open it since upgrading to v.12.0.1.26 and Yosemite?

Since upgrading to itunes v. 12.0.1.26 and Yosemite (same day), iTunes has been making me log in every single time I open it.
Not only that, but it makes me log in several times, for iCloud, for iTunes match, for whatever else we do on iTunes. It gives me like five different reasons to log in, and I have to type my password in five times.
Can anyone tell me what is going on here and how to fix it? Thanks!

Back up all data before proceeding.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
Right-click or control-click the login entry in the list. From the menu that pops up, select
          Change Settings for Keychain "login"
In the sheet that opens, uncheck both boxes, if not already unchecked.
From the menu bar, select
          Keychain Access ▹ Preferences ▹ First Aid
If the box marked
          Keep login keychain unlocked
is not checked, check it.
Select
          Keychain Access ▹ Keychain First Aid
from the menu bar and repair the keychain. Quit Keychain Access.

Does iTunes have a mind of its own?

I would like to preface this by saying that I do not want to see, hear, touch, taste, or smell iTunes unless I choose to open iTunes from the start menu. The one and only reason in the entire world that I even have it installed on any computer that I use is because my iPhone won't sync with anything else that i know of.
I have done everything I see to do to keep this program from opening by itself. I have turned off updates and perform them manually. I have all media file extensions set to open in Windows Media Player. WMP is set to be my default media player. According to all the options I see, iTunes should not be opening... but it does! All the time! When I open a move, the movie opens in WMP... 10 seconds after WMP opens, iTunes opens. What is it doing? Nothing. It opens and displays my library while WMP is still open playing the movie I chose. Furthermore, when I attempt to close it it pauses for some time before alerting me that "one or more applications is still using the scripting interface..."
To summarize:
When I open a media file it opens in windows media player.
When windows media player opens iTunes opens.
iTunes does not close immediately because it claims something is using it's scripting interface.
I do not want itunes to open unless I open it.
What can I do to fix this?
Is there an alternative utility I can use to sync with my iPhone?
There are no plugins in iTunes, my phone is not attached to my system in these instances, itunes is up to date, windows media player is up to date, windows vista is up to date, and I don't appear to have any driver issues.

Not sure what you do in Vista, it might be the same as XP. click the start button, then open the run window. type msconfig.
Here you will find an interface where you can change what automatically starts on your computer. Be warned though, do not turn off items willy nilly or your computer might not boot correctly.
In the startup section you will see all sorts of programs that are started when you boot. From experience nearly all programs these days want to "own" your pc.
The installer programs want to make sure their program is used over others. If you look down the list you will see what iTunes stuff is loading, you can uncheck all of this as it is not necessary and only takes up RAM. iTunes will load perfectly well without this "assistance".
I would advise you to google up on the msconfig options and turn off most of the ones that programs run. Exceptions would be virus/malware scanners etc. Some common ones that run are Adobe stuff like acrobat reader, MS office assistance like fast find, also imaging software tends to do this. That's why you see icons appear in the system tray. Sometimes programs are run from the registry and are much harder to stop at start up.
In my view with so much RAM available these days it is totally unnecessary for programmers to do this.

My new iPad not recognised as a device in iTunes on my IMac - I have the latest version of iTunes, have tried logging off and on but still no device listed. Can anyone advise how to resolve this?

I am trying to sync my new iPad with iTunes on my iMac but when I attach the iPad to the computer via USB it still doesn;t show up as a device in iTunes. What am I doing wrong? I have checked all the tech specs and all seem ok. I bought the iPad in the U.S. - would this make a difference?

What you provided is not everything mentioned.
Your Mac is running 10.5.8 or later and iTunes 10?
You are connecting the iPad direct to a USB port on your Mac and you have tried every port?
You have reinstalled the Apple Mobile Device Service?
If your Mac is running Snow Leopard - 10.6, have you checked this link?
http://support.apple.com/kb/TS3540

Is there a way to delete all duplicates, other than one by one? some free program or does itunes have one to just identify and delete all duplicates in the library?

How do I delete duplicates in my library as a group, rather than one by one?

Apple's official advice on duplicates is here... HT2905: How to find and remove duplicate items in your iTunes library. It is a manual process and the article fails to explain some of the potential pitfalls such as lost ratings and playlist membership.
Use Shift > View > Show Exact Duplicate Items to display duplicates as this is normally a more useful selection. You need to manually select all but one of each group to remove. Sorting the list by Date Added may make it easier to select the appropriate tracks, however this works best when performed immediately after the dupes have been created. If you have multiple entries in iTunes connected to the same file on the hard drive then don't send to the recycle bin.
Use my DeDuper script if you're not sure, don't want to do it by hand, or want to preserve ratings, play counts and playlist membership. See this thread for background, this post for detailed instructions, and please take note of the warning to backup your library before deduping.
(If you don't see the menu bar press ALT to show it temporarily or CTRL+B to keep it displayed.)
The most recent version of the script can tidy dead links as long as there is at least one live duplicate to merge stats and playlist membership to and should cope sensibly when the same file has been added via multiple paths.
tt2

Does iTunes have a log?

Similar Messages

Maybe you are looking for