Does MSI 845PE Max supports LBA

In fact all is in the title... Does MSI 845PE MAX (6580) supports for LBA drive?

Yes, as you need to have the patch incorporated in order to recognize the total drive to start with. There is some info here: http://support.microsoft.com/default.aspx?scid=kb;en-us;305098

Similar Messages

  • MSI 845PE MAX

    i'm using the mainboard MSI 845PE MAX
    does anyone else uses this board?
    i just wanna know if this board can support AGP 8x graphic cards
    can anyone tell me? 

    hello, nope its support maximum AGP 4x. but good news is that you can use any AGP 8x VGA on it without almost any limitation. differents is quite little. only few visual increament. nothink performance related.

  • MSI 845PE MAX-L mobo no power whatsoever

    Hi,
    Just upgraded my mobo, RAM & processor to the following:
    MSI 845PE MAX-L mainboard
    Intel Pentium 4 2.4 GHz
    DDR-DIMM PC2700 512MB
    Put everything together and worked a treat from Monday. Reinstalled all my software including XP and had everting running smoothly for over 24 hours with the tower boxed up (so no possibility of accidentally touching any componentry).
    This morning I tried to switch on the machine and NOTHING. No response from the mobo no fans no lights no beep - nothing.
    Checked all leads in place.
    Then tried power supply (Eagle ATX 350W Switching Power Supply Pentium 4 compatible) on my old ABIT mobo together with my old 256 Mb SRAM & Hercules 3D Prophet 32MB graphics card. It worked!
    So put same setup back on the new MSI mobo, i.e. just graphics card, 512Mb DRAM, power supply & Intel 2.4 processor. Still nothing. Pretty sure got all my leads from the tower in all the right places on Mobo as they matched the previous configuration and that wouldn't have worked before, right?
    Whats going on, why does my pc work one day and then can't be arsed the next?
    Lloydich

    I had an Eagle 350watt PSU come supplied in my new case but i didnt trust the PSU so i took it out without even trying it.
    What is your complete system build setup?
    Those el-cheapo PSU's are not really upto running the most intense of systems despite what the manufacturers say.
    Unplug a few components from off the PSU and try to boot up again... its not impossible the PSU is dead... honestly if you spend alot of money on a new system it seems criminal not to get a decent PSU, im not criticisng here im just surprised how many people dont consider getting a 'good' PSU to power their new state of the art PC's.
    Try the unplugging of a few components that connect to the PSU if this dont work for you then if possible try a better PSU (350 watt does not neccesarily mean its good, some cheap 350 watt PSU's are less powerful than a good 300 watt PSU)

  • [Please Help]Does MSI Axis 945G support intel core2 duo T7600?

    I have an idle CPU  intel core2 duo T7600,so I am considering  buying  an AXIS 945GM to let it work.
    I have a question ,does MSI Axis  945G support intel core2 duo T7600?
    I checked the CPU suppot list on MSI website,I just found it suppots upto T7400.
    Can I flash the new BIOS v1.23  to support T7600?
    thank you!

    According to the CPU Support List, this won't help.  The best thing to do would be to contact MSI Technical Support.  Maybe they can give you a more definate answer:
    http://ocss.msi.com.tw/

  • MSI 845PE Max Motherboard TV CARD problems

    hello,
    i'm use to MSI 845PE Max motherboard and avermedia tv card. i'm plug in to avermedia anywhere pci slot in motherboard but not installed avermedia. error is "ACPI bios system motherboard extension" How i can install to avermedia tv card.. HELP ME..!
    PoWeRGuArD

    i'm plug in to avermedia anywhere pci slot in motherboard
    dont understand this bit,try different pci slots

  • MSI 845PE Max Lan - MS-6580 Ver.2.0 boot failure

    I recently purchased this mainboard and components. All's working fine except for 1 strange issue:
    On each 1st boot-up (after I powered down) the harddisk (UDMA 100, 80GB Western Digital) is not detected. This results in a boot failure.
    After this 1st failure I reset and from then on booting is OK, harrdisk is succesfully detected (although it always takes about 10-15 seconds before detecting).
    Anyone else experiencing the same problems?
    This is my config:
    - MSI 845PE Max Lan
    - 2,4GHz P4
    - Western Digital 80GB 7200rpm (set as master, only device on its cable)
    - ATI Radeon 9700
    - 512 MB DDR (pc2700)
    Hope anyone can help out.

    Note: FSB533 CPU is required in order to choose DDR333 selection in the BIOS setup
    thats what is says here
    http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=364&MODEL=MS-6580

  • MSI 845PE Max-L

    Is there a compability problem between Radeon 9200 Atlantis,P4 2.66 Gig prosessor and MSI 845PE Max-L ??
    Memory module is DDR 400 512 Ram,HD is Maxtor 120 Gig ATA 100
    Every single component works fine with my other Motherboard ( MSI 845E Max )
    but when I try to start these in 845PE Max-L only thing that happens is prosessor cooler spins 2 seconds...then totally silence....I got a motherboard replaced once
    already....
    I cleared CMOS
    tried another graphic card ( Geforce3 Ti 500 )
    Nothing happens even with default settings...
    Highly unlikely that two broken motherboards has been given to me !?!?!?!
    Please someone tell me what to do..
    E-Mail,MSN or here at the Boards...
    - THX -

    "Lower you DRAM Freq to 333MHz and increase you DDR Voltage to 2.7v, thereafter incrasing your AGP Voltge to 1.6v."
    Why ? and how ?
    cannot go to BIOS..
    and I just asked if there is a compability problem...
    Danny : no other cooler movement :(
    just prosessorcooler spins few times,
    there are no shorts between board and case through the standoffs.
    I took motherboard out of case ( in case of that )
    Whole F****n thing is starting to me off...
    Never had this much problems with MSI-boards :(
    So,once again ; every component works in 845E max ,same case,same powersupply etc.
    Only sure thing seems to be : 2 broken motherboards ! ( god damn )

  • Does MSI ECLIPSE SLI SUPPORT

    Hi
      i want to know is my mobo MSI ELCIPSE SLI support intel new processer Corei7 2600K or not?

    Quote
    i want to know is my mobo MSI ELCIPSE SLI support intel new processer Corei7 2600K or not?
    No. The i7 2xxx series are 1155 socket & the X58's are 1366.

  • MOVED: Does MSI E350IA-E45 support AMD virtualization?

    This topic has been moved to Linux/Unix.
    https://forum-en.msi.com/index.php?topic=153096.0

    Thanks for pointing me in the right direction!
    It has a Realtek RTL8111E lan controller, which does support WOL.
    Willie

  • Does MSI B85M-E45 support 4K UHD Support? - which is correct???

    I want to know if the MSI B85M-E45 motherboard supports 4K UHD ? (3840 x 2160 resolution).
    When I read the overview of the MSI B85M-E45 motherboard it says it does supports it (it is mentioned in two different places)
    However, when I see the 'detailed specification' it says the following :
    1 x HDMI port, supporting the maximum resolution of 4096x2160@24Hz, 24bpp 2560x1600@60Hz, 24bpp 1920x1080@60Hz, 36bpp
    So why don't they mention 3840 x 2160????
    Can someone at MSI clarify the situation??? Why don't they mention it?? Which is correct on of them must be wrong?
    I need 3840 x 2160 at 30Hz on the HDMI port. This is to support a UHD monitor.
    This site, wont' let me post links to MSI own web site!

    Quote
    Quote
    maximum
    resolution of 4096x2160@24Hz
    So anything less than that should be covered... It wasn't a list, just maximums.

  • Does MSI P67A-C45 supports the latest Sandy bridge Celeron (G530,540 etc)

    Hello all,
    Firstly, I'm the new user here, and I found this forum when I'm in the process of 'googleing' for my new system problems...
    Okay, I'm the 'proud' user of MSI P67A-C45 motherboard and due to some sort of fund problems, I just bought this mobo and use the lowest end Sandy Bridge line processor, which is Celeron G540 processor. After getting the enough money somewhere around March next year, I will straightly change my processor to Core i5-2500K (which I assume it will be more cheaper than now)... After installing everything on my new rig, suddenly there are no BIOS shown up at all. The power is available, all of the LED's as well as my heat sink fan are running finely. I'm suspecting that this kind of mobo does not support Celeron G540 processor... So how? Anyone here can help me to resolve this problems... It really ruined my day and now I'm typing this on my netbook which irritating.... Some of my friends said that it must be BIOS related problems... because Celeron is just launched recently and perhaps the BIOS bundled with my motherboard are the older one..... Below is my full rig specification...
    Processor : Intel Celeron G540 Processor
    Motherboard : MSI P67A-C45 (B3)
    RAM : Corsair Value RAM 8GB DDR3 1333MHz (two sticks of 4GB RAM each)
    GPU : Sapphire HD6750
    Power SUpply : Xigmatek NRP-PC502  500W
    Casing : CM Elite 431
    HDD : Samsung Spinpoint F3 1TB
    SSD : Mushkin 60GB SATA-III SSD
    ** Planning to replace send back the celeron to the seller and change it to Core i3-2100, Core i3 is usable or not with this mobo?
    Thanks guys and I really apologize for my bad English... It's not my mother-tongue language actually 

    Quote from: Henry on 26-December-11, 07:54:09
    You have BIOS 1.9 which should support all of the CPU's you mentioned.
     Have you plugged in the 4 pin CPU power (JPWR2) on MB & 6 pin to video card PCIe power plugs?
    Yes, I already connected 4-pin cpu power as well as 6-pin PCIe power connector both to my motherboard and graphic card, but the system still refuse to shown up the POST screen... :(  BTW, I already change the processor from Celeron G540 to Core i3 2100... Waiting for the stock available from the seller...

  • Does MSI P55-GD65 support eSata hot-plug?

    I believe the title is self-explanatory, but I'll explain anyway..
    I have a MSI P55-GD65 motherboard which has an onboard eSata port. I have a second eSata port in the front plate of my case.. The thing is, that the only way for it to recognize my eSata external hard drive, is if the drive is connected and powered BEFORE I boot my PC. Not very convenient when it comes to portable devices. Is there anything I have to change in the BIOS or any drivers I should install (for Windows 7 Ultimate 64-bit) so that I can power on and off my drive while my PC is working?

    Actually, I did some more digging after my post, I figured out how to do it (I tweaked the registry because I had installed Windows 7 with sata mode set to IDE), and now it works fine..
    There's only one issue. My external drive does not appear in the devices I can "safely remove". So I don't know how risky it is to just turn of my HDD while the PC is powered on..

  • Does msi 850e max can work with 533 mhz Prescott cpu?

    Hi
    I am using msi 850emax mainboard with 533 mhz p4 2.8 cpu without ht.
    I want  to buy a  533 mhz  Prescott  cpu with ht.
    Can it work on msi 850 e max mainboard?
    Thanks
    Magicboy

    http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_cpu_support_detail.php?UID=345
    nope

  • Re: Does MSI B85I Gaming support RAID?

    Quote from: Munchic2206 on Today at 17:20:43Sorry, what do you mean?
    I mean there is no mention of RAID on the board spec page http://www.msi.com/product/mb/B85I-GAMING.html#hero-specification

    Quote from: Chike on Today at 15:10:44As in the past, because now it does not?
    Sorry, what do you mean?

  • Does MSI 990FXA-GD80 support Dolby Digital Live?

    I need to output DD5.1 to a Turtle Beach Earforce DSS decoder. It know that some realtek-equipped motherboards can encode to DD Live do this but I don't have the option for DD Live in the Realtek Sound Manager under Supported Formats, nor in Windows sound properties under Advanced, although under Supported Formats it does show Dolby Digital (not Live) ticked.
    So is it possible to do this or will I need to buy another soundcard?

    Quote from: debounced on 27-January-13, 10:40:17
    Hello,
    I purchased a mini to TOSLINK optical cable to connect my GT70 0NC to my Logitech Z-5500 5.1 speaker system and I was wondering if the ALC892 supports Dolby Digital Live. I'm able to get DTS and Dolby Digital to work just fine, but I don't see an option to change the default format of the digital output in the Realtek HD Audio Manager to Dolby Digital Live. I'm running Windows 7 64 bit with the latest audio drivers available.
    Thanks
    I hate saying this.
    Do yourself a favor, go buy an Asus Xonar U3, plug it in, and you will be much happier.
    I have a Z680 (precursor to the Z5500, pretty much the same thing though), and I couldn't stand how bad the Realtek HD performed. The Asus Xonar does a much better job. You hook it up, set it to output to the 'speakers', but have your TOSLINK cable connected, and you get upconverted dolby digital live sound output. Couldn't ask for anything better. The U3 only runs about $40, so it's not a huge investment.

Maybe you are looking for