Does OTL support array type?

My C++ code talks with PL/SQL through OTL. I want to define one of the input parameter of PL/SQL as array, can OTL support array? Is there any sample code? Thanks!

Hi,
I cannot find a OTL forum in OTN, so posted here.
That's because OTL is not an Oracle product.
The link you provided has a link to the OTL discussion forum:
http://sourceforge.net/forum/forum.php?forum_id=208859
Perhaps that would be a better place to post your question.
Regards,
Mark

Similar Messages

Does TopLink support arrays of primitive types?

Does TopLink support arrays of primitive types?

You must use a collection.
If you really wanted to you could store the data as an array and use get/set methods to convert between the array and collection, or customize your own ContainerPolicy, however arrays a very inefficent to add/remove from so TopLink only provides support for collections.

"...does not support this type of alias."

I just reinstalled the OS 10.4 onto my G5 using the erase and install function. The drive is formatted as a Mac OS Extended (Journaled), which is an HFS+ format. I'm trying to copy some files onto the main hard drive from a DVD. I keep getting an error message that says "[the file name] cannot be copied to the destination, perhaps because the destination does not support this type of alias." I researched the message and the only thing I could find was that the error appears if the destination disk is formatted as a UFS disk. I thought maybe I made a mistake when I reinstalled the OS, so I tried to copy the same files to the secondary internal drive and to an external Firewire drive, and I got the same message both times.
What should I be looking for so that this will work? I'm going to post in a couple other topics, but any help would be greatly appreciated.
Thank you in advance,
Lloyd

Barry,
I was trying to make back-up copies of my Adobe CS2 disks by copying the disks to the hard drive then burning them to CDs, but I got the error message when I dragged the contents from the original CD to the HD.
This worked, but it took a while: I Stuffed each CD to the HD, then unStuffed them and used Toast to burn a new CD. A few steps longer, but at least it worked.
Now, if I could only figure out why the second internal drive does not have the "Ignore Permissions" check box available, I'd be all set.
Thanks,
Lloyd

DataSource does not support requested type

hi,
i have a question about BI bean.
i use 9iDS 2 JDeveloper to create a JSP with BI beans.when i run this page,error message show in console window.like this:
Log : Current DataSource does not support requested type: DataMap.DATA_FORMATTED : oracle.dss.thin.beans.crosstab.CrosstabModelAdapter : setSupportedDataLayerFlags ()
Log : Current DataSource does not support requested type: DataMap.DATA_RATIO : oracle.dss.thin.beans.crosstab.CrosstabModelAdapter : setSupportedDataLayerFlags ()
Log : Current DataSource does not support requested type: DataMap.DATA_VIEWFORMAT : oracle.dss.thin.beans.crosstab.CrosstabModelAdapter : setSupportedDataLayerFlags ()
Log : Current DataSource does not support requested type: DataMap.DATA_VIEWSTYLE : oracle.dss.thin.beans.crosstab.CrosstabModelAdapter : setSupportedDataLayerFlags ()
what's this? my server is 9.0.1.3,olap patch 9.0.1.2 .
Thanks

Hi,
I have the same error occurring also. It happens when I try to drill down to a lower level within my BI BEANS application. As I am using a JSP to hold my BI BEANS this occurs on either a Bar Graph click or a Crosstab expension. I have both the Crosstab and the Graph linked.
07/10/02 13:03 ftvApp: PROBLEM: In oracle.dss.thin.beans.crosstab.CrosstabModelAdapter::setSupportedDataLayerFlags () - Current DataSource does not support requested type: MetadataMap.METADATA_VIEWSTYLE
07/10/02 13:03 ftvApp: PROBLEM: In oracle.dss.thin.beans.crosstab.CrosstabModelAdapter::setSupportedDataLayerFlags () - Current DataSource does not support requested type: DataMap.DATA_FORMATTED
07/10/02 13:03 ftvApp: PROBLEM: In oracle.dss.thin.beans.crosstab.CrosstabModelAdapter::setSupportedDataLayerFlags () - Current DataSource does not support requested type: DataMap.DATA_RATIO
07/10/02 13:03 ftvApp: PROBLEM: In oracle.dss.thin.beans.crosstab.CrosstabModelAdapter::setSupportedDataLayerFlags () - Current DataSource does not support requested type: DataMap.DATA_VIEWFORMAT
07/10/02 13:03 ftvApp: PROBLEM: In oracle.dss.thin.beans.crosstab.CrosstabModelAdapter::setSupportedDataLayerFlags () - Current DataSource does not support requested type: DataMap.DATA_VIEWSTYLE
07/10/02 13:03 ftvApp: PROBLEM: In oracle.dss.thin.beans.crosstab.CrosstabModelAdapter::setSupportedDataLayerFlags () - Current DataSource does not support requested type: MetadataMap.METADATA_VIEWSTYLE
Regards,
Scott.

SAML Credential Mapper does not support credential type

Has anybody any idea on what could be causing the message below, which is being logged several times?
<[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <1309285937475> <BEA-000000> <SAMLCredentialMapperV2: getCredentials(Subject): getCredentialInternal() called>
<[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <1309285937475> <BEA-000000> <SAMLCredentialMapperV2: getCredentialInternal(): **SAML Credential Mapper does not support credential type: weblogic.UserPassword, returns null**>
Best regards
Update: Forgot to mention this is SOA Suite 11G environment
Edited by: user9501748 on Jun 28, 2011 11:53 AM

I've got the same issue too.
My setup is to have one domain acting as both Source and Destination.
For every 10 seconds, I'm seeing 4 of these logs, and the CPU consumption is 100% consistently.
####<2-Jun-2009 11:00:27 o'clock AM EDT> <Debug> <SecuritySAMLCredMap> <MYHOST> <AdminServer> <[ACTIVE] ExecuteThread: '18' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1243954827839> <BEA-000000> <SAMLCredentialMapperV2: getCredentials: Subject initiator>
####<2-Jun-2009 11:00:27 o'clock AM EDT> <Debug> <SecuritySAMLCredMap> <MYHOST> <AdminServer> <[ACTIVE] ExecuteThread: '18' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1243954827839> <BEA-000000> <SAMLCredentialMapperV2: getCredentials(Subject): getCredentialInternal() called>
####<2-Jun-2009 11:00:27 o'clock AM EDT> <Debug> <SecuritySAMLCredMap> <MYHOST> <AdminServer> <[ACTIVE] ExecuteThread: '18' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1243954827839> <BEA-000000> <SAMLCredentialMapperV2: getCredentialInternal(): SAML Credential Mapper does not support credential type: weblogic.UserPassword, returns null>
Does anyone know what's happening? I've got one of the Security Provider = Active Directory, and thus there's no password returning. Could it be the root cause of the problem?

Does oracle support array in SQL?

The follow syntax for postgresql works with good performance, does Oracle support? Thanks
select
     r.company_code,
     r.date,
     r.d5[1] as d5_udm,
     r.d5[2] as d5_ddm,
     r.d5[3] as d5_tr,
from (
     select
          q.company_code,
          q.date,
          (select array[avg(abs(highest_rate-opening_rate)), avg(abs(opening_rate-lowest_rate)), avg(highest_rate-lowest_rate)] from (select lowest_rate, highest_rate, opening_rate from hkex.quotation q1 where not q1.is_trade_suspend and q1.company_code=q.company_code and q1.date<=q.date order by q1.date desc limit 5) t) as d5
     from hkex.quotation q
     where not q.is_trade_suspend
) r;

Hi,
I'm not a postgresql exponent but the following query might work, though I haven't tested it.
select
r.company_code,
r.date,
udm as d5_udm,
ddm as d5_ddm,
tr as d5_tr,
from (
select
q.company_code,
q.date,
(select avg(abs(highest_rate-opening_rate)) udm,
          avg(abs(opening_rate-lowest_rate)) ddm,
          avg(highest_rate-lowest_rate) tr
from (select lowest_rate, highest_rate, opening_rate
        from hkex.quotation q1
        where not q1.is_trade_suspend = '0' -- as below
        and q1.company_code=q.company_code
        and q1.date<=q.date
        order by q1.date desc limit 5) t) as d5   -- not sure what limit 5 does (possibly first 5 rows?)
from hkex.quotation q
where q.is_trade_suspend = '0' -- Oracle does not support boolean data type for columns so change col to varchar2(1) with '0' and '1' for false and true
) r;Andre
Edited by: acadet on Mar 4, 2010 3:43 PM

Does jdbc support data type ROWID?

Hi,
I've got a column of type ROWID named id in my_tab, I tried to retrieve the values in Java, as follows but fails:
ResultSet rs = conn.getStatement().executeQuery("select id from my_tab");
while (rs.next()) {
java.sql.RowId id = rs.getRowId("id"); //fails, anything wrong here?
the error msg is:
Exception in thread "main" java.lang.AbstractMethodError: oracle.jdbc.driver.OracleResultSetImpl.getRowId(Ljava/lang/String;)Ljava/sql/RowId;
Thank you!
Message was edited by:
user569548
Message was edited by:
user569548

Hi,
I've got a column of type ROWID named id in my_tab, I
tried to retrieve the values in Java, as follows but
fails:
ResultSet rs =
conn.getStatement().executeQuery("select id from
my_tab");
while (rs.next()) {
java.sql.RowId id = rs.getRowId("id");
//fails, anything wrong here?
the error msg is:
Exception in thread "main"
java.lang.AbstractMethodError:
oracle.jdbc.driver.OracleResultSetImpl.getRowId(Ljava/
lang/String;)Ljava/sql/RowId;
Thank you!
Message was edited by:
user569548
was edited by:
user569548Thanks for those who have bothered to view this thread. I have googled and struggled and found out that Oracle supports ROWID type by:
(1) ResultSet' method getString() rather than getRowId(), which is weird.
(2) and oracle.sql.ROWID, CF java.sql.RowId.

Does N9 support this type of MfE url ?

Hi!
We run a Lotus Notes Traveler server to sync our mail and calendars.
Does N9 support this kind of URL: ?
server_name:XXXXX/servlet/traveler
Where server_name is the server name, XXXXX is the port number, and then the server url.
At least in Nokia E72 and E6 it doesn't work (but i tested and iPhone 3GS and Samsung Galaxy SII and it works fine in both).
Regards and thanks.

Hi Patrick,
May be the followng thread will solve your problem.
/thread/24147 [original link is broken]
Thanks,
Ramakrishna

POP failure to receive. Server does not support encryption type

After working OK for 3 weeks or so, the POP and IMAP connections started failing. In a running client, it adds the error code 0x800CCC1A. When the server was first installed, it started doing that and it was resolved when I installed a valid CA certificate.
Outlook Anywhere and OWA continue to work, both inside and outside, and we never get any certificate mismatch errors. Oddly enough, I can send email with a POP (or IMAP) account but not receive. Since this seemed to point to the certificate, I have double
checked it. There are 4 certs, 3 are self signed: the Exchange Server Auth, Exchange Delegation and WMSVC. The 4th is the SAN cert, from a CA. I removed all services from the 3 self signed certs and the CA cert has all 4 services. The Auth Cert keeps giving
itself back the SMTP but the failure occurs even if I remove that cert. I have not found any errors in the event log that match the time of testing.
We are running Exchange 2013, CU7, on a 2012 R2 Std Server. The DC is a 2012 R2 Essentials server.
Any suggestions appreciated.
Lou
Louyo

Hi Lou,
According to your description, I understand that POP account can’t receive message with error “0x800CCC1A”, however it can send message without error.
If I misunderstand you concern, please do not hesitate to let me know.
I want to double confirm whether all POP3 account or some special account experience this issue?
Error “0x800CCC1A” means that the Secure Sockets Layer (SSL) encryption is turned on for your e-mail account or firewall prevent.
Please try to disable SSL to test: File---> Account Setting---> Change, switch to POP3 and IMAP setting then disable SSL.
If the issue persists, please try to run below command to ensure whether SSL or TLS is used for POP3:
Get-PopSettings –Server server1 | FL Identity, X509CertificateName
Best Regards,
Allen Wang

Does BC support any type of include?

We currently have/use 4 templates, but that is about to grow. We also have several catalogs, but that too will grow.
All of these templates use the exact same header (menu) and footer.
Every time I need to make a change to the header/menu/footer, I must make it in all 4 templates, and their stylesheets.
Now we want to have a different template for each catalog in our store.
I know I can make and assign different templates, one for each catalog, but that presents another issue. Since I currently have 4 templates, and each has it's own stylesheet, when I make a change to the header or footer, which is the same on all 4 templates, I must make that change in all 4 templates and all 4 stylesheets. That's a lot of work. If I have multiple templates for multiple catalogs, that work doubles for each new template.
So if I have 20 catalogs and 20 templates, and need to change the menu in the header, then I have to make those changes in 40 places, 20 templates and 20 style sheets.
Is there any way in BC to use something similar to PHP Includes? Or what about using Dreamweaver Library Objects? Is that possible or compatible?
Thank you in advance.

Content Holders.
http://helpx.adobe.com/business-catalyst/using/create-insert-reusable-content.html

Does java support enumerated types?

You know?
Enum pieceType{knight,king,queen,bishop, pawn};

No it doesn't.
For some reason I can't remember at 1 in the morning, it goes against OOAD principles.
class Piece {...}
class Knight extends Piece {...}etc...

Array types

I came to know that PostgreSQL supports array types. i. e., an attribute can be decomposed further.
see this example:
CREATE TABLE XYZ ( ID SERIAL, MONTH_WISE_SAL INTEGER[ ][ ]);
Why does'nt Oracle implement this?
Is it because it violates the First Normal form ???

Who told you Oracle hasn't implemented it?
Look up varrays, nested tables, and nested table types containing varrays, and any combination thereof, depending on what you want to do.

Does Aperture support the use of Filters or Brushes?

I want to be able to have more control over the final print versions of my photos using Aperture (instead of having to spend hundreds on the latest Photoshop)... Does Aperture support any type of filtering or brushwork? Any freeware out there that dovetails with Aperture?

Steve Weller wrote:
No, but...
I poked around inside Aperture a while ago and there are some icons and other images that suggest it is coming one day. My guess is that there is insufficient hardware or OS support for it right now and so it ha not been enabled.
And if you look in the .plist file you'll see preferences for "brushes" labeled Dodge, Burn, Saturate, Desaturate, Warmer and Cooler. Brushes also appear to have Size, Softness and Strength attributes - does this indicate future drawing pad support??!!

How does Labview support redundancy?

I have a control system and Labview will act as the means of control/monitoring. However, I want to have a primary and secondary computer with duplicate system setups. How does Labview support this type of redundancy such that if the primary goes down, the secondary will take control seamlessly.

Hi,
LabVIEW has many capabilities that can be combined to create a very robust redundant system. Some of these features include the following:
Archiving databases periodically
Monitoring a process on a remote machine
Executing an application on the backup when the primary has failed
The most straight forward method of implementing the monitoing is to use discrete memory tags to create a heartbeat. When the heartbeat on the Primary machine has stopped, the backup should take over and begin execution.
If you have specific questions about how to implement this, feel free to call support by going to www.ni.com/ask.
Regards,
Mike

Does ISE support wildcard certificates?

Hello guys,
My customer doesnt have a CA, but instead has wildcard certificates.
I will implement ISE in 3 different locations (each location independent and with all ise services). Havent look in dept about wildcard certs, but does ISE support this type of certificates? The certs i need is only for corporate users not to be shown with the ssl cert error when accesing ise portals.
If wild certificates supported, then will every independent site need to create a separate CSR for each one of them?
Thanks!
Emilio

Support for Universal Certificates:
Cisco ISE, Release 1.2 supports the use of wildcard server certificates for HTTPS (web-based services)
and EAP protocols that use SSL/TLS tunneling. With the use of universal certificates, you no longer have
to generate a unique certificate for each Cisco ISE node. Also, you no longer have to populate the SAN
field with multiple FQDN values to prevent certificate warnings. Using an asterisk (*) in the SAN field
allows you to share a single certificate across multiple nodes in a deployment and helps prevent
certificate-name mismatch warnings.
For more information, refer to the Cisco Identity Services Engine User Guide, Release 1.2. Kindly find the attached PDF for your clarification ISE 1.2 supports wildcard certificates. Even I had highlighted the same on page 14.
Support for Universal Certificates:
Cisco ISE, Release 1.2 supports the use of wildcard server certificates for HTTPS (web-based services)
and EAP protocols that use SSL/TLS tunneling. With the use of universal certificates, you no longer have
to generate a unique certificate for each Cisco ISE node. Also, you no longer have to populate the SAN
field with multiple FQDN values to prevent certificate warnings. Using an asterisk (*) in the SAN field
allows you to share a single certificate across multiple nodes in a deployment and helps prevent
certificate-name mismatch warnings.
For more information, refer to the Cisco Identity Services Engine User Guide, Release 1.2.

Does OTL support array type?

Similar Messages

Maybe you are looking for