Does RoboHelp 11 have an option to do a Where Used in regards to shared Images?

We have several Topics in our Help project, which share the same inserted image.
From a broader, global perspective, is there a quick and easy way to do a Where Used type of search, and see a list of all Topics where a shared image has been inserted?

Sorry for the slow response.
For this purpose it will be better to use the view where both topics and images show in the same folder. Using that view you are saying the images are in a folder called WebHelp that does not contain any source topics (usually WebHelp is the name given to an output rather than any source files). If you are, create a single topic in that folder to see if that forces the folder to appear.
I have seen files not shown in an image folder and renaming the folder forces a refresh. However you cannot see the folder at the moment. There is something else that could be the cause but it is unlikely and I would like to know more about the whole project structure for that. Is this a project you could share with me? If you can then see the Contact page on my site and send the project as instructed there. Do make sure you include a link to this thread and please do not email the project direct.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Similar Messages

Does RoboHelp 11 have the ability to add filters for the search function?

Does Robohelp 11 have the ability to add filters for the search function?

There's a page on my site about ZoomSearch. You can set up Rh to work with that and have a page with links or buttons that bring up different search options.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

I'm a beginner and would like to know which Photoshop to use (so many options). The only edits I care about being able to do are: whitening teeth, smoothing complexions/taking away blemishes. Does any photoshop have these options? I haven't been able to

I'm a beginner and would like to know which Photoshop to use (so many options). The only edits I care about being able to do are: whitening teeth, smoothing complexions/taking away blemishes. Does any photoshop have these options? I haven't been able to find the teeth whitening one anywhere. Also, I don't want it to lessen the high quality if my photos. Thank you so much!!

Hi Erika,
I came to Lightroom quite recently (in the last month!) from Photoshop Elements 11. I like the organization features in LR better, but for adjustments such as the ones that you mentioned I would leave LR and go back to Photoshop Elements 11, primarily because that is what I know. I don't use the subscription service, mainly because I already owned and installed the boxed version of Photoshop Elements 11 and adding it to a subscription service with Lightroom seemed redundant. I am sure someone in the community will (or has) comment(ed) that it is possible to whiten teeth and cure blemishes within LR, but I haven't figured out how to do that yet. Check out the TV Adobe free tutorials, particularly Julianne Kost's tutorials. She has a good presentation style and you might find the LR answer that you need with detailed instructions.

Does the iPhone have the option of having a standard telephone type keyboard instead of the normal comp type

Does the iPhone have the option of having a standard telephone type keyboard instead of the normal comp type

phone icon/keyboard (at the bottom of the page )

HT4759 I have an iMac, iMac, 10,1 10.8. I would like to have iCloud downloaded to my computer. Does my computer have the system requirement necessary. I use iCal on my Apple Notebook and Iphone 4S. Thank you!

I have an iMac, iMac, 10,1 10.8. I would like to have iCloud downloaded to my computer. Does my computer have the system requirement necessary. I use iCal on my Apple Notebook and Iphone 4S and want it to my Mac Desktop to sinc with all my Apple Products. Thank you!

The minimum requirement for iCloud is Lion 10.7.5 (Mavericks preferred): the iCloud Preference Pane does not appear on earlier systems - the MobileMe pane appears on Lion and earlier but is now non-functional - you cannot now open or access a MobileMe account.
To make use of iCloud you will have to upgrade your Mac to Lion or Mavericks, provided it meets the requirements.
The requirements for Lion are:
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
Lion is available in the Online Apple Store ($19.99). Mountain Lion (10.8.x) is also available there at the same price (though it's reported to have been removed from sale in some countries so may well cease to be available generally) but there seems little point as the system requirements are the same for Mavericks (10.9.x) - which is free - unless you need to run specific software which will run on Mountain Lion only.
The requirements for Mountain Lion and Mavericks are:
OS X v10.6.8 or later
2GB of memory
8GB of available space
and the supported models are:
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminum, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
Xserve (Early 2009)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer)
It is available from the Mac App Store (in Applications).
You should be aware that PPC programs (such as AppleWorks) will not run on Lion or above; and some other applications may not be compatible - there is a useful compatibility checklist at http://roaringapps.com/apps:table

I recently switched to Aperture. When I opened an image I imported from iPhoto, I don't have an option to edit it. Top of "Adjustments" tab says "image offline". How can I adjust Aperture so I can make adjustment to my iPhoto images?

I recently switched to Aperture. When I opened an image I imported from iPhoto, I don't have an option to edit it. Top of "Adjustments" tab says "image offline". How can I adjust Aperture so I can make adjustment to my iPhoto images?

I never tried importing from the iPhoto library as referenced images. I wonder if Aperture can access images stored in an iPhoto library package? Even if it would work, it sounds like a bad thing to do.
You might consider starting over and this time have Aperture manage the images. That will copy them to the Aperture library, leaving the iPhoto library untouched. This assumes you have sufficient space to make a complete copy of all the images in your iPhoto library plus another copy of each image that Aperture makes as the preview image. You can then back up your iPhoto library (two backup copies, just to be sure) then remove it from your hard drive when you start getting too low on space. As I write this I don't know where your iPhoto or Aperture libraries are/will be located so I'm assuming you have them on your HD.

Does anyone know how to display (in LabVIEW) the memory use during execution of an image and data acquisition VI to predict when it is time to cease the acquisition to prevent the program crashing?

Does anyone know how to display (in LabVIEW) the memory use during execution of an image and data acquisition VI to predict when it is time to cease the acquisition to prevent the program crashing?
I am acquiring images and data to a buffer on the edge of the while loop, and am finding that the crashing of the program is unpredictable, but almost always due to a memory saturation when the buffers gets too big.
I have attached the VI.
Thanks for the help
Attachments:
new_control_and_acquisition_program.vi ‏946 KB

Take a look at this document that discusses how to monitor IMAQ memory usage:
http://digital.ni.com/public.nsf/websearch/8C6E405861C60DE786256DB400755957
Hope this helps -
Julie

Does anyone know how to display (in LabVIEW) the memory use during execution of an image and data acquisition VI to predict when it is time to cease the acquisition to prevent the program crashing?

Does anyone know how to display (in LabVIEW) the memory use during execution of an image and data acquisition VI to predict when it is time to cease the acquisition to prevent the program crashing?
I am acquiring images and data to a buffer on the edge of the while loop, and am finding that the crashing of the program is unpredictable, but almost always due to a memory saturation when the buffers gets too big.
I have attached the VI.
Thanks for the help
Attachments:
new_control_and_acquisition_program.vi ‏946 KB

got these vi's off ni site a while ago - see if they help
Attachments:
Memory_Monitor.zip ‏132 KB

Does any one have a sample code for sending email using IMAP ?

Hi
thank you for reading my post
I have tried to use SMTP and because of some problems i could not use it and i must use Imap (authentication required)
here is my SMTP code , does any one know how i can tune it to use Imap , or has a code snippet to send email using Imap ?
thanks
private static void postMail(String[] recipients, String subject, String message,
                         String from) throws MessagingException {
        boolean debug = false;
        class SMTPAuthenticator extends javax.mail.Authenticator
                public PasswordAuthentication getPasswordAuthentication()
                    return new PasswordAuthentication(mail_usrname,mail_password);
        //Set the host smtp address
        Properties props = new Properties();
        FileInputStream fis;
        try {
            System.out.println("Loading property file");
            fis = new FileInputStream(new File("c:/email.properties"));
            props.load(fis);
            System.out.println("property file done");
        } catch (FileNotFoundException e) {
            System.out.println("file not found");
            e.printStackTrace();
        } catch (IOException e) {
            System.out.println("can not read properties file");
            e.printStackTrace();
        /*props.put("mail.smtp.user", mail_usrname);
props.put("mail.smtp.host", smtpHost);
props.put("mail.smtp.port", smtpPort);
props.put("mail.smtp.starttls.enable","true");
props.put("mail.smtp.socketFactory.port", smtpPort);
        // create some properties and get the default Session
        Authenticator auth = new SMTPAuthenticator();
        Session session = Session.getDefaultInstance(props, null);
        session.setDebug(debug);
        // create a message
        Message msg = new MimeMessage(session);
        // set the from and to address
        InternetAddress addressFrom = new InternetAddress(from);
        msg.setFrom(addressFrom);
        InternetAddress[] addressTo = new InternetAddress[recipients.length];
        for (int i = 0; i < recipients.length; i++) {
            addressTo[i] = new InternetAddress(recipients);
msg.setRecipients(Message.RecipientType.TO, addressTo);
// Setting the Subject and Content Type
msg.setSubject(subject);
msg.setContent(message, "text/HTML");
System.out.println(msg.toString());
Transport.send(msg);

Please try this out!!!!!!!!!
You can send emails using Outlook also. You can send email over Microsoft Exchange with this object (or another email server, using IMAP/POP).
Sub SendMailOutlook(aTo, Subject, TextBody, aFrom)
'Create an Outlook object
Dim Outlook 'As New Outlook.Application
Set Outlook = CreateObject("Outlook.Application")
'Create e new message
Dim Message 'As Outlook.MailItem
Set Message = Outlook.CreateItem(olMailItem)
With Message
'You can display the message To debug And see state
'.Display
.Subject = Subject
.Body = TextBody
'Set destination email address
.Recipients.Add (aTo)
'Set sender address If specified.
Const olOriginator = 0
If Len(aFrom) > 0 Then .Recipients.Add(aFrom).Type = olOriginator
'Send the message
.Send
End With
End Sub

I am just wondering does anyone else have a problem in lightroom 4 where some of the tools dont work

does anyone else have the problem of some tools not working in lightroom 4? for eg. skin smoothing and iris enhance??

The background music I chose was a standard Apple Loop, but on playback it sounds like someone has cut the music, each time the Loop connects to the extended loops I made when I dragged the end of the initial loop out over a short distance? Did I do it wrong?
When you extend the loop by dragging the the end of the loop (you'll see a bracket as cursor), you will extend the loop by silence and hear a sharp cut. To make the loop longer, loop it. Grab it in a way, that you'll see a curved arrow as pointer and not the bracket.

I don't have the option on Photoshop CC of using Photo Frames from the Fill Menu.

Is this a bug?
I have an Nvidia GTX 670 which is enabled in preferences.
I have noticed some reference to items like Photo Frame being greyed out - it just does not appear on my PC.

Thanks, That's where it was hiding.
I was looking at the tutorial
Create with patterns | Learn Photoshop CC | Adobe TV
and it was under Edit/Fill/Scripted.
I presume they've moved it.
Thanks.
Alex

Does Responsive HTML5 have an option to force the output to be lowercase?

Using RoboHelp 11.0.3.268, I'm testing the Responsive HTML5 layout as a potential upgrade from our current WebHelp SSL. The one thing I cannot find in configuring the SSL is the option to force the output to lowercase like what is offered in WebHelp and other SSLs. This is a critical project requirement because our team authors on Windows, which is case insensitive, and we publish help output to UNIX web servers, which is case sensitive.
Thanks,
Alan

Also, I should add this. As long as everyone is authoring in RoboHelp, there really shouldn't be issues because RoboHelp "has your back".
I believe what that option is intended to prevent is a situation where someone may be using perhaps Notepad or maybe even an app such as CoffeeCup HTML Editor to edit the content. And when creating links, if you were to create a topic that was named MyTopic.hTm, if you created the link as mytopic.htm, of course it would break on a UNIX system. And I'm guessing you already know that. So the RoboHelp option just changes all the names and the links to lower case to prevent breakage. But if all are working in RoboHelp and not hand coding links, you are probably totally safe. In fact, I'd be shocked to see that RoboHelp would actually have allowed creating any broken links.
Cheers... Rick

Does Migration Assistant Have "Drive Options"?

We're planning on acquiring a new iMac this upcoming week, one the has both the 256 GB SSD and the 2 TB HD.
We want to use Migration Assistant in association with our current iMac which only has a 1 TB drive.
Question: does Migration Assistant offer the user choices of where the files from the old iMac are migrated to on the new iMac?
More specifically, we want to put the applications on the 256 GB SSD and all other files on the 2 TB internal HD.
Will Migration Assistant allows us to do this?

Have a read here http://web.me.com/pondini/AppleTips/SetupOther.html
Stefan

Why does my spouse have the option to receive my text messages?

On both phones, when you go to Settings>Messages>Send and Receive>YOU CAN BE REACHED AT, both of our numbers are listed. If I check his number on my phone, obviously he would get my messages. His number is not checked. Problem: When HE checks MY number on HIS phone, I do not get his. Rather, HE gets MY messages. We both use my apple account, which may be the problem? I have a 4s, he has a 5s.

If iMessage is activated in Settings/Messages, all text messages will be sent using Apple servers and mobile data. iMessage is not a carrier feature, it is provided by Apple.
You will receive messages that have been sent to all numbers or mail addresses marked on your device in iMessage/Receive at.
So, if your number is marked on his phone, he will get your messages as well (and you will too).
Setting up his own Apple ID will separate iMessages again, because iMessage is linked to the AppleID and not the phone number, since you can also use the Mail address.

Does Oracle occi have any memory bugs when writing blobs using streams?

The function below will produce some kind of memory corruption that will cause an exception (which cannot be identified since memory is corrupted) while doing another call:
ora::Statement stmt(__cn);
string sql("BEGIN Pckg.Sp_procA(:1, :2, :3, :4, :5, :6, :7, :8, "
":9, :10, :11, :12, ":13, :14, :15, :payload); END;");
occi::Blob payload(__cn.getConnection());
occi::Environment* tempEnv = occi::Environment::createEnvironment();
occi::Timestamp reportTime(tempEnv);
reportTime.fromText(__report.report_time), "yyyy-mm-ddH24:mi:ss.ff");
stmt.setSQL(sql);
stmt.setString     (1, "");
stmt.setString     (2, "");
stmt.setString     (3, __report.varA);
stmt.setString     (4, __report.varB);
stmt.setInt          (5, __report.varC);
stmt.setString     (6, __report.varD);
stmt.setString     (7, __report.varE);
stmt.setString     (8, __report.varF);
stmt.setTimestamp(9, reportTime);
stmt.setNull     (10, occi::OCCITIMESTAMP);
stmt.setString     (11, __report.varG);
stmt.setString     (12, __report.varH);
stmt.setString     (13, __report.varI);
stmt.setString     (14, __report.varK);
stmt.setString     (15, __report.varX);
stmt.setBinaryStreamMode(16, __report.payload.Size(), true);
stmt.executeUpdate();
occi::Stream* streamedData = stmt.getStream(16);
streamedData->writeLastBuffer(__report.payload.GetPtr(), __report.payload.Size());
stmt.closeStream(streamedData);
occi::Environment::terminateEnvironment(tempEnv);
return true;
The function below works perfectly unless the code above is executed and looks like this:
ora::Statement stmt(__cn);
string sql("BEGIN "
"Pckg.Sp_procB(:1, :2, :3, :4, :5, :6, :7, :8, :9, :10, :11); END;");
occi::Environment* tempEnv = occi::Environment::createEnvironment();
occi::Timestamp reportTime(tempEnv);
reportTime.fromText(__report.report_time, "yyyy-mm-dd HH24:mi:ss.ff");
stmt.setSQL(sql);
stmt.setString     (1, "");
stmt.setString     (2, "");
stmt.setString     (3, __report.varA);
stmt.setString     (4, __report.varB);
stmt.setInt          (5, __report.varB);
stmt.setString     (6, __report.varD);
stmt.setString     (7, __report.varE);
stmt.setString     (8, __report.varF);
stmt.setString     (9, __report.varG);
stmt.setTimestamp(10, reportTime);
stmt.setNull     (11, occi::OCCITIMESTAMP);
stmt.executeUpdate();
occi::Environment::terminateEnvironment(tempEnv);
return true;
I got the blob insert example from Oracle's documentation and can't see anything wrong with it. The second function also seems to be ok which got me thinking that Oracle's occi might have some kind of bug that corrupts memory. Anyone knows anything about this or has done anything similar?

Does anyone insert blobs this way? Or just using the "insert -> select for update" way?

Does RoboHelp 11 have an option to do a Where Used in regards to shared Images?

Similar Messages

Maybe you are looking for