Does SAP have  function to allow the prices for the activities type to copy

Hi Expert,
Would like to seek for your help refer to above subject.
Does SAP have  function to allow the prices for the activities type to copy from previuos fiscal year to current fiscal year so that we do not need to manually set up the acitvities types prices via KP26.
What are the T-code and what are the configuration need to be set in order to use the function.
Please help.
Regards,
KH

Hi,
Thank you for the prompt reply.
However, would like to seek for your advise does SAP provide standard report to view the cost of activities incur?What are the T-code?
Thank you.
Regards,
Karen

Similar Messages

  • ME21N : Donu2019t copy the price for all condition types from last po

    Dear.
    When I create a purchase order the price for all condition types are copied from last purchase order inside the info-record.
    But I have some condition types like FRA1 or FRA2 that I donu2019t want that system transfer price from last purchase order.
    How can I do that ?
    Thanks.

    Hi Cris,
    Go to SPRO>MM>PUR>Info Record>Define Price History> Here with your Purchasing organization if the tick is active that
    Specifies that the order price history (PO price history) is to be updated with the effective price.
    Normally, the order price history is updated with the net price.
    Procedure
    Set this indicator if you want the order price history to be updated with the effective price.
    Thanks
    Diwakar

  • Does SAP have report display the history of dunning

    Dear Expert,
    Would like to seek for your help,Does SAP have report display the history of dunning for AR module and what are the T-code and report?
    Please help.
    Regards,
    KH

    Hi
    Dunning status is updated in customer master,you can get the required data from Table LFB5
    hope this will help to some extent
    Thanks
    Kameshwar Rao

  • How to find a customer who does not have any activity in the last 5 years

    HI all,
       How to find a customer who does not have any activity in the last 5 years.
    Thanks & Regards,
    Moderator message: not directly related to ABAP development, please have a look in the respective functional forum.
    Edited by: Thomas Zloch on Jan 3, 2011 2:20 PM

    Post Author: tzinser
    CA Forum: Formula
    Okay, I left off a lot of important information...
    I'm using two tables
    TWDATA
    EVENT
    From TWDATA I'm pulling the fields TWDATA.OrderNumber and TWDATA.DisbursementDate
    From EVENT I'm pulling the fields EVENT.EventCode and EVENT.CompletedDate
    The two tables are linked by OrderNumber.

  • Does SAP have any WBS report able to drill downdown detail to PO level

    Hi Expert,
    Would like to seek for your advise as below:
    a) Does SAP have any WBS report able to drill downdown detail to PO level for the assign cost?
        What is the T-code?
    b) What is the table contain WBS information with related PO level for the assign cost?
    Please help.
    Regards,
    KH

    Hi,
    a) Try CJI5 as menioned by Gokul.
    b) Try a query combining EKKN, EKPO and PRPS (if you need any other WBS detail).
    regards
    Sreekanth

  • Does anyone have Ford sync allowing text messaging with IOS 7.0.4?

    I had all the settings working when I was on ios 6, but now that I have upgraded it quit working.  I removed the sync from my phone and removed the phone from my phone from sync then paired again.  Then set the sync notifications back to on but still no text.  Does anyone have ford sync allowing text messaging with IOS 7.0.4?

    I need to update, my messaging is now working.  Apparently after going through the steps and the settng notifications to on all I had to do was turn off the car, open the door, and then return.  When I got in my car this morning the text messaging (recieve only) was working.

  • Question about SAP standard functionality related to the GL master record.

    My question is;
    Is this a SAP standard functionality to update the description ( long text or short) of a GL account (in master record) in one company code when we change the description of the same GL account in another company code which is assigned to the same chart of account?
    For example we have two company codes and both are assigned to the same chart of account and we are changing long text of one GL account in one CoCd. Should it update the long text of the same GL account in other CoCd assigned to the same chart of account? If so, then is this a standard SAP functionality or there is any setting where we can turn this functionality on or off.
    Thanks in advance for help n answer.

    Hi 
    GL accounts control takes place two leval
    1.Chart of account leval
    2.Comapany code leval
    In chart of account leval  Type/Description,Keywoard Translation,Information of Chart of Account of account tabs are controlled ,if u made any changes above tabs that should be applicable to all company codes using same chart of accounts.
    u r changing the short text,long text these are controlled by char of accounts leval this should be applicalbe to all company codes, u can't maintain company code leval type and description.

  • Getting this error while opening a folder : This file does not have a program associated with it for performing this action. Please install a program or, if one is already installed, create an association in the Default Programs control panel

    Hi,
    While trying to open a folder on my Windows 7 Home Premium, an error comes "This file does not have a program associated with it for performing this
    action.  Please install a program or, if one is already installed, create an association in the Default Programs control panel." I tried searching on the net but did not get great support for the issue when it happens with folder opening.

    Hi Nikunj Shah,
    First, I suggest you download
    Microsoft Safety Scanner or
    Malicious Software Removal Tool to run a full scan.
    The error messages here seems to be caused by the corrupted registries, which related with the folder association.
    You may take a try to merge the following registry settings to reset the folder association, before that, remember to backup your registry settings first:
    How to back up and restore the registry in Windows
    Copy and paste the following commands into Notepad, and save it to a .reg file:
    =================
    Windows Registry Editor Version 5.00
    [HKEY_CLASSES_ROOT\Folder]
    "ContentViewModeLayoutPatternForBrowse"="delta"
    "ContentViewModeForBrowse"="prop:~System.ItemNameDisplay;~System.LayoutPattern.PlaceHolder;~System.LayoutPattern.PlaceHolder;~System.LayoutPattern.PlaceHolder;System.DateModified"
    "ContentViewModeLayoutPatternForSearch"="alpha"
    "ContentViewModeForSearch"="prop:~System.ItemNameDisplay;System.DateModified;~System.ItemFolderPathDisplay"
    @="Folder"
    "EditFlags"=hex:d2,03,00,00
    "FullDetails"="prop:System.PropGroup.Description;System.ItemNameDisplay;System.ItemTypeText;System.Size"
    "NoRecentDocs"=""
    "ThumbnailCutoff"=dword:00000000
    "TileInfo"="prop:System.Title;System.ItemTypeText"
    [HKEY_CLASSES_ROOT\Folder\DefaultIcon]
    @=hex(2):25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,00,74,00,25,\
      00,5c,00,53,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,73,00,68,00,\
      65,00,6c,00,6c,00,33,00,32,00,2e,00,64,00,6c,00,6c,00,2c,00,33,00,00,00
    [HKEY_CLASSES_ROOT\Folder\shell\explore]
    "MultiSelectModel"="Document"
    "ProgrammaticAccessOnly"=""
    "LaunchExplorerFlags"=dword:00000018
    [HKEY_CLASSES_ROOT\Folder\shell\explore\command]
    "DelegateExecute"="{11dbb47c-a525-400b-9e80-a54615a090c0}"
    [HKEY_CLASSES_ROOT\Folder\shell\open]
    "MultiSelectModel"="Document"
    [HKEY_CLASSES_ROOT\Folder\shell\open\command]
    "DelegateExecute"="{11dbb47c-a525-400b-9e80-a54615a090c0}"
    @=hex(2):25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,00,74,00,25,\
      00,5c,00,45,00,78,00,70,00,6c,00,6f,00,72,00,65,00,72,00,2e,00,65,00,78,00,\
      65,00,00,00
    [HKEY_CLASSES_ROOT\Folder\shell\opennewprocess]
    "MUIVerb"="@shell32.dll,-8518"
    "MultiSelectModel"="Document"
    "Extended"=""
    "LaunchExplorerFlags"=dword:00000003
    "ExplorerHost"="{ceff45ee-c862-41de-aee2-a022c81eda92}"
    [HKEY_CLASSES_ROOT\Folder\shell\opennewprocess\command]
    "DelegateExecute"="{11dbb47c-a525-400b-9e80-a54615a090c0}"
    [HKEY_CLASSES_ROOT\Folder\shell\opennewwindow]
    "MUIVerb"="@shell32.dll,-8517"
    "MultiSelectModel"="Document"
    "OnlyInBrowserWindow"=""
    "LaunchExplorerFlags"=dword:00000001
    [HKEY_CLASSES_ROOT\Folder\shell\opennewwindow\command]
    "DelegateExecute"="{11dbb47c-a525-400b-9e80-a54615a090c0}"
    [HKEY_CLASSES_ROOT\Folder\ShellEx\ContextMenuHandlers\BriefcaseMenu]
    @="{85BBD920-42A0-1069-A2E4-08002B30309D}"
    [HKEY_CLASSES_ROOT\Folder\ShellEx\ContextMenuHandlers\Library Location]
    @="{3dad6c5d-2167-4cae-9914-f99e41c12cfa}"
    [HKEY_CLASSES_ROOT\Folder\ShellEx\ContextMenuHandlers\Offline Files]
    @="{474C98EE-CF3D-41f5-80E3-4AAB0AB04301}"
    [HKEY_CLASSES_ROOT\Folder\ShellEx\DragDropHandlers\{BD472F60-27FA-11cf-B8B4-444553540000}]
    @=""
    [HKEY_CLASSES_ROOT\Folder\ShellEx\PropertySheetHandlers\BriefcasePage]
    @="{85BBD920-42A0-1069-A2E4-08002B30309D}"
    [HKEY_CLASSES_ROOT\Folder\ShellEx\PropertySheetHandlers\Offline Files]
    @="{7EFA68C6-086B-43e1-A2D2-55A113531240}"
    [-HKEY_CLASSES_ROOT\Folder\ShellNew]
    [HKEY_CLASSES_ROOT\Folder\ShellNew]
    "Directory"=""
    "IconPath"=hex(2):25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,00,\
      74,00,25,00,5c,00,73,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,73,\
      00,68,00,65,00,6c,00,6c,00,33,00,32,00,2e,00,64,00,6c,00,6c,00,2c,00,33,00,\
      00,00
    "ItemName"="@shell32.dll,-30396"
    "MenuText"="@shell32.dll,-30317"
    "NonLFNFileSpec"="@shell32.dll,-30319"
    [HKEY_CLASSES_ROOT\Folder\ShellNew\Config]
    "AllDrives"=""
    "IsFolder"=""
    "NoExtension"=""
    ==================
    Once done, right-click the REG file and choose Merge. Alternately, you can open the Registry Editor and then using the
    Import option from the File menu, to merge the REG file contents.
    Let me know if you need any further help.
    Best regards
    Michael Shao
    TechNet Community Support

  • Every time I update or repair in the control panel it comes up with a error message like, this file does not have a program associated with it for performing this action, please install a program if it is installed create an association to the default pro

    EVERYTIME I UPDATE SOFTWARE OR GO INTO THE CONTROL PANEL TO ITUNES TO REPAIR OR CHANGE IT GIVES ME AN ERROR MESSAGE
    THIS FILE DOES NOT HAVE A PROGRAM ASSOCIATED WITH IT FOR PERFORMING THIS ACTION. PLEASE INSTALL A PROGRAM, IF IT IS INSTALLED CREATE AN ASSOCIATION TO THE DEFAULT PROGRAMS CONTROL PANEL

    STOP SHOUTING!  Or at the very least, get the CAPS lock key fixed.
    Remove iTunes.
    Download and install the current version of iTunes from http://www.apple.com/itunes/download

  • Tying to install itunes and I get error message "This file does not have a program associated with it for performing this action.  Please install a program, or if one is already installed, create an association in the Default Programs control panel.  Help

    am tTying to install itunes and I get error message "This file does not have a program associated with it for performing this action.  Please install a program, or if one is already installed, create an association in the Default Programs control panel. Can anyone help me?

    Hi,
    Here is a similar thread for your reference:
    There is no email program associated to perform the requested action. Please install an email program or, if one is already installed, create an association in the Default programs control panel
    http://social.technet.microsoft.com/Forums/en/w7itproappcompat/thread/036e3cf6-bff7-4ef2-bd0a-555cd2399ad4
    Hope this helps
    Vincent Wang
    TechNet Community Support

  • My iPad does not have sound when on the Internet, including YouTube, but does have sound with iTunes and other apps.  How can I correct this?

    My iPad does not have sound when on the Internet, including YouTube, but does have sound with iTunes and other apps.  How can I correct this?

    If you are sure that you have sound in other apps - and if you can still hear keyboard clicks and get notifications, then system sounds are not muted. Try this and see if it works.
    Close all apps completely and reboot the iPad.
    Go to the home screen first by tapping the home button. Double tap the home button and the recents tray will appear with all of your recent apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • Is there any way of exporting a clip (example 1 hour) into 4 seperate 15 min clips at the same time? Or does anyone have any ideas along the same lines to save time? Add my skype baconhousevidz if you can help or are unsure of what im asking

    Is there any way of exporting a clip (example 1 hour) into 4 seperate 15 min clips at the same time? Or does anyone have any ideas along the same lines to save time? Add my skype baconhousevidz if you can help or are unsure of what im asking
    thanks everyone

    BaconHouseVidz wrote:
    … at the same time…
    in hope to speed things up?
    no, no effect.

  • Macbook pro keeps cutting out then wont turn on for a while then when it does same thing happens! Does any1 have any idea what the problem is?

    Macbook pro keeps cutting out then wont turn on for a while then when it does same thing happens! Happens with charger plugged in or not and green charge light stays on even when it cuts out and cant be turned on! Does any1 have any idea what the problem is?

    Try SMC and PRAM resets:
    http://support.apple.com/kb/HT3964
    http://support.apple.com/kb/ht1379
    Ciao.

  • TS3989 Mssage when opening Photo Stream on-"This file does not have a program associated with it for performing this action. Please install a program or, if one is already installed, create an association in the Default Programs control panel" Help!!!

    Mssage when opening Photo Stream on-"This file does not have a program associated with it for performing this action. Please install a program or, if one is already installed, create an association in the Default Programs control panel" Help!!!

    You are posting in the "icloud on my mac" forum, but your profile mentions Windows.  If using a mac, you need to have iphoto or aperture installed in order to receive new photos via photo stream.  If using windows, try posting in the iCloud on a PC forum.  You'll get better help there.
    https://discussions.apple.com/community/icloud/icloud_on_my_pc

  • When running setup, I get"This file does not have a program associated with it for performing this action. Please install a program or, if one is already installed, create an association in the Default Programs control panel.

    whe I try to install Firefox 4.0.1, I get a Red X message. ""This file does not have a program associated with it for performing this action. Please install a program or, if one is already installed, create an association in the Default Programs control panel. Is there a fix?

    I Did that. When I try to install, I get the same message. I have come to believe this is a windows 7 or IE 9 problem. I also have active X problems that I can not resolve. I can not open Gmail also

Maybe you are looking for

  • OWB Error while generating Code for a mapping

    I have a simple mapping loading from a source to a flat file. When I try to generate code it gives me the following Error VLD-2357: Target Data File name not specified for file <target Flat file name>. I am new to OWB so any help on the same will be

  • T400: Heat Damage Repair / Replacement Help

    I have a 6months old T400. One fine day I decided to store my laptop in the boot of the car for safe keeping. Unfortunately it was a bad decision ; heat damage resulted in a crack on the back of my monitor cover (right next to the lenovo emblem). I a

  • Printing Slug Area in CS3?

    Hi, folks, Our documents have Comments boxes in the slug area of the page that an InCopy CS3 user would like to be able to print out in Layout view. I don't see that option in the Print dialog; since these Comments boxes are part of the article, the

  • Customization of va01

    Hi all, I want to customize va01 to display default value in sold-to-party field in selection-screen by using exits. what is the procedure? please answer this question. TKS, Dharani.P

  • IMac (Intel core 2 duo early 2008) wifi problem

    I've recently moved into a new basement office, and my iMac (2.4 GHz core 2 duo - early 2008) is having terrible trouble picking up my wireless network. No surprise you may think, with it being in a basement - but my iPad, when held next to the iMac