Does the LAN port really work for wired internet?

Ok. So I've seen this question asked, but nobody ever seems to come back and say "great, it worked!". If I have my AEBS connected to my DSL modem via the WAN port, Set up with my PPPOE info and set to distribute IP addressess and WDS on, can it also distribute to my desktop via the LAN port. I've seen many yeses, but I can't get it to work. The iMac also has an Airport card, and both it and my MAcBook can get to the internet fine. Also, if I set up the iMac for ethernet and connect it directly to the DSL modem (with the PPOE info in the iMac), it can also connect no problem. However, if I set the iMac up for ethernet and to get it's info via DHCP, and connect it to the AEBS LAN port, it doesn't even show an ethernet cable is connected. This leads me to believe that the LAN port is disabled in whatever config I have going with the AEBS. Any help would be great. Thanks.

FYI, after further testing, it appears my port is loose? If I hold the cable and press firmly into the LAN port, I get a connection. if I let go of the cable, I lose it. So, if I bend the cable under the unit and scotch tape it in place... no problem. It is a refurb unit. Oh well.

Similar Messages

Does the Canon iMAGE Gateway work for anyone?

Does the Canon iMAGE Gateway work for anyone? or is it just mine. Registered my product, cant login, cant find suppot anywhere lol.

Hi Mizer805!
If you're experiencing problems while trying to log in, it sounds like you'd best benefit from contacting our Technical Support group. They'll be able to check the status of ImageGateway and also check to see if there's any problems logging in.
You can reach our support staff through our Contact Us link. We're confident they can help you out.
Hope this helps!

Does the ipad2 case covers work for the regular ipad

Does the ipad2 case covers work with the regular ipad?

If you mean the Apple smart cover for the iPad 2, no.
Any case specifically designed for the iPad 2 will not work with the original iPad.

WRT54GC - Does the DHCP Server really work?

Hi everyone,
Im new to this forum so i dont know if this problem has been discussed before and is there any solution to it.
I own a WRT54GC since January 2007 and have had no problems since then, but recently I found out some issues about the DHCP server on this unit:
This is what i have on the network for you guys to understand my network setup:
Cogeco Cable Modem for the internet (Im located in Canada), Linksys WRT54GC router, One Trendnet File/Print Server for my USB all in one Lexmark printer, and external hard drive, and an Acer laptop.
The network works perfectly (wireless internet, wired internet, printing, file transfer) except for the following DHCP issue:
DHCP server does not update the IP address of my laptop even if in the router settings i assign 5 mins or any minuites to the lease time of the IP address and I keep my laptop on and connected to the router either wireless or wired.
The router has been enabled for DHCP and can assign the IP address automatically to my laptop upon powerup. I also have allocated 6 users for DHCP and starting IP at 192.168.1.101 which means that the range is from 192.168.1.101 to 192.168.1.106
When I check who's connected to the network, I see that my lap is connected to it and the expiry of the lease time is given. I can also see that if the lease time is set to 5mins then it down counts until zero and it defaults to some wiered number after the time is over and doesnt change the IP address of my laptop. Looks like a bug in the DHCP server software. The above was tried when using the wireless connection.
When I connected the laptop using the ethernet cable to the router (wired connection) a somewhat similar behaviour but instead if I set a lease time of 5mins or any other mins, the server does not recognize this and defaults it to a lease time of a day (similar to setting 0).
I have configured my laptop for DHCP so I dont think there is anything wrong with my laptop but I do feel that the DHCP server on this WRT54GC is working abnormally.
Any suggestions?......Try it out first and see if you have the same problem.
If you dont than i will be glad if you could tell me how you were able to make it work!
Cheers.
(Edited post for guideline compliance. Thanks!)
Message Edited by JOHNDOE_06 on 10-08-2007 11:26 AM

Thanks for your reply. Im not looking forward to change my IP address every 5 mins. My question is more related the functional behaviour of the DHCP server. With all the proper settings (and I belive I have done the settings correctly), the DHCP server should update the IP addresses of any computer on the network after the lease period ends and provided the computer was on for the time the lease period is valid and not shut off. Even if I use the default lease setting of a day, it still does not change the IP address if I keep my laptop on for more than a day or so. I feel that the DHCP server is not functioning as it should. I dont really need to change my IP address and Im happy if it doesnt change, but I came across the abnormal behaviour when I was going through the setup. I just thought I should try to see how the DHCP server on this unit works and to see that it was not working as it should I thought I should ask someone on the community forum to see if this is really a normal behaviour or has linksys distributed a faulty product. My network works fine and Im the only user so Im not concerned about security. Im using WEP. To answer your other questions: There is no specific reason as to why I chose to limit DHCP to 6. I think 6 is good enough for me and as no one else is using my network I think 6 is an enough number for DHCP server to assign an unused IP address to my laptop after the lease period expires. I believe I dont need 50. The reason why I used 5 mins as lease time is because I wanted to test the DHCP server. 5 mins is short and I can wait and monitor to see if my IP address gets updated. Waiting for a day will be overkill for the simple test. Did you try it on your router? I'd be interested to know how it worked for you if it really worked. Thanks for you help!

How does the SetDefaultReport Method really work?

I've looked in the forum and can't find the answer in enough detail for me to understand it.
I need to create a new print button on a system form (delivery notes) and when the user presses it, I need to change the default report for the user/bp combination on the screen, invoke the print button, then return the user's records in the RDFL table back to what they were before I made a change.
I have it working so that everything up to the changing things back is fine. (Although if the user doesn't have any defaults already, then I have to set the same default twice, because the first set assigns the system values, even though I assign a reportcode, layout code, card code and user id).
But the main problem is if the user/bp combination did not have a default specified in RTYP before I made my change, then I can't get rid of my default record in that table, so the next time the user goes to print via the system print button, hoping to get the system default, my default report is going to print instead and that's not what they want. Whew!
Is there some place on the website that might explain this process in some detail? For instance, why are their records in this table with a negative userid number & what does that mean? Why does the user need to be a super user for me to do this via the DI but they can do it through the application without being a SU?
I'd really appreciate any insights, and thank you.

Hi Rasmus,
In regards to your trouble getting the default report so that you can set it back when your done, I think I've gotten that figured out. It appears to me that GetDefaultReport always returns the original default for a document that is used (from the RTYP table). This is regardless of user/customer. What I'm doing is looking in RDFL by user & customer for any specific default and use it if found.
If not found, then I use the getreportdefault & assign it to that user/customer. This puts a record in RDFL which is not the way the system would do it (It would delete the record, I believe), but it seems to have the same effect.
            'get current default report for this user for delivery docs
            ReportCode = "DLN2"
            rs.DoQuery("Select dfltreport from rdfl where userid = " & USERID & _
                    " and doumntdode = '" & ReportCode & "' and cardcode = '" & cardcode & "'")
            If Not rs.EoF Then
                HoldLayout = rs.Fields.Item(0).Value
                'otherwise use the system default
            Else
                'get report layout service
                oReportLayoutService = oCmpSrv.GetBusinessService(ServiceTypes.ReportLayoutsService)
                'get report params
                oReportParams = oReportLayoutService.GetDataInterface(ReportLayoutsServiceDataInterfaces.rlsdiReportParams)
                'Load the key for the default report
                oReportParams.ReportCode = ReportCode
                oReportParams.UserID = USERID 'This doesn''t seem to work. Changing user doesn''t change results
                'get the default layout of the specific document (delivery note)
                oReportParaDefault = oReportLayoutService.GetDefaultReport(oReportParams)
                HoldLayout = oReportParaDefault.LayoutCode
            End If

Does the composite AV cable work for iPad2?

I could not get a "yeah" from anywhere of the HK reseller/dealer nor HK online store for the Composite AV cable supporting iPad2...whilst it is stated compatible at US & UK Apple online stores...so, is there any driver/version compatibility issue for those sold in HK? Anyone helps with the intell before I buy one. Thanks...

Thanks guys...it really gets to the situation that I may need to have 3 different cables for different purposes, composite for my analog in-car LCD player, hdmi for my home HDTV, and one for VGA projector at work. All these unfortunately come by different interfaces from different production time. I hope I can get some all-in-one converter or some sort that I don't have to spend big bucks buying 3 Apple cables but probably the newest hdmi. Researching is still in progress...

Does the Target Audiences setting work for Content Search Web Part Snippets?

I am attempting to create a page layout in SharePoint 2013 that contains a Content Search Web Part snippet.
I only want the CS Web Part to appear for certain users in a defined SP Group.
I set the Target Audience property during the generation of the snippet.
Unfortunately, the target audience property does not affect the appearance of the web part.
It appears all the time, even when the current user is not a member of the named SP group.
Here is my snippet, the group I am targeting in called "US Region":

<div ms-webpart-chrome-fullWidth ">
<div id="WebPartWPQ1_ChromeTitle">
<span title="United States - $Resources:Microsoft.Office.Server.Search,CBS_Description;" id="WebPartTitleWPQ1"><h2 style="text-align: justify;"><nobr><span>United States</span><span id="WebPartCaptionWPQ1"></span></nobr></h2></span>
</div><div noindex ms-wpContentDivSpace " id="WebPartWPQ1" allowdelete="false" onlyformepart="true" width="100%" haspers="true" webpartid="00000000-0000-0000-0000-000000000000"><div
id="ctl00_ctl00_PlaceHolderMain_ComponentMain_ComponentPropertyGrids_g_2d49bab8_c61e_44b3_91c2_c1c44a4cea75_csr" componentid="ctl00_ctl00_PlaceHolderMain_ComponentMain_ComponentPropertyGrids_g_2d49bab8_c61e_44b3_91c2_c1c44a4cea75_csr"></div><noscript><div
id="ctl00_ctl00_PlaceHolderMain_ComponentMain_ComponentPropertyGrids_g_2d49bab8_c61e_44b3_91c2_c1c44a4cea75_noscript">It looks like your browser does not have JavaScript enabled. Please turn on JavaScript and try again.</div></noscript><div
id="ctl00_ctl00_PlaceHolderMain_ComponentMain_ComponentPropertyGrids_g_2d49bab8_c61e_44b3_91c2_c1c44a4cea75">
<div>
<div id="WebPartWPQ2_ChromeTitle">
<span title="" id="WebPartTitleWPQ2"><h2 style="text-align: justify;"><nobr><span></span><span id="WebPartCaptionWPQ2"></span></nobr></h2></span>
</div><div ms-WPBorder noindex ms-wpContentDivSpace " id="WebPartWPQ2" allowdelete="false" onlyformepart="true" width="100%" haspers="true" webpartid="00000000-0000-0000-0000-000000000000"><div
id="ctl00_ctl00_PlaceHolderMain_ComponentMain_ComponentPropertyGrids_g_2d49bab8_c61e_44b3_91c2_c1c44a4cea75_ctl00_csr" componentid="ctl00_ctl00_PlaceHolderMain_ComponentMain_ComponentPropertyGrids_g_2d49bab8_c61e_44b3_91c2_c1c44a4cea75_ctl00_csr"></div><noscript><div
id="ctl00_ctl00_PlaceHolderMain_ComponentMain_ComponentPropertyGrids_g_2d49bab8_c61e_44b3_91c2_c1c44a4cea75_ctl00_noscript">It looks like your browser does not have JavaScript enabled. Please turn on JavaScript and try again.</div></noscript><div
id="ctl00_ctl00_PlaceHolderMain_ComponentMain_ComponentPropertyGrids_g_2d49bab8_c61e_44b3_91c2_c1c44a4cea75_ctl00">
</div><div></div></div>
</div>
</div><div></div></div>
</div>

I am having the same issue. Did you ever resolve it?

How does the Identity Column really work?

I am having an issue with an application using SQLServer 2008. My app has a class called SalesInvoice. I use ADO and VB6 for my app.
The Index value for the record is the "Sales Invoice Number" which was created as an Identity_Spec with an increment of one. It was created using SSMS. It is set as the Primary Key and is Unique. It is a bigint data type.
I have discovered in Microsoft documentation that the identity increment might get lost. (See the quote copied form the help file.)
"The identity property on a column does not guarantee the following:
Uniqueness of the value – Uniqueness must be enforced by using a
PRIMARY KEY or UNIQUE constraint or
UNIQUE index.
Consecutive values within a transaction – A transaction inserting multiple rows is not guaranteed to get consecutive values for the rows because other concurrent inserts might occur on the table. If values must be consecutive then the transaction
should use an exclusive lock on the table or use the SERIALIZABLE isolation level.
Consecutive values after server restart or other failures –SQL Server might cache identity values for performance reasons and some of the assigned values can be lost during a database failure or server restart. This can result in gaps in the
identity value upon insert. If gaps are not acceptable then the application should use its own mechanism to generate key values. Using a
sequence generator
with the NOCACHE
option can limit the gaps to transactions that are never committed.
Reuse of values – For a given identity property
with specific seed/increment, the identity values are not reused by the engine. If a particular insert statement fails or if the insert statement is rolled back then the consumed identity values are lost and will not be generated again. This can result
in gaps when the subsequent identity values are generated."
There is no issue with consecutive values within a transaction, although each invoice is written out in a transaction, as it is paired with Sales Line detail records. They are linked using the Sales Invoice Number.
The issue comes in with the line " udtProps.InvoiceNumber = .Fields("Invoice Number")" as this is the property that returns the sales invoice number to the app that is used to actually print the invoice.
My problem is with the 3rd bullet point from the help file. "Consecutive values after server restart or other failures ", particularly the "Other Failures" as they are not defined.
I have pasted the sub from the class that actually persists the record, below. It includes the Error handler routine. Ia particularly concerned that the case of the Database record lock conflict error might be one of the "Other Failures" described
in the help file above. In at least One occasion, the invoice printed with an invoice number of 690172, but was written to the database with an invoice number of 690175.
If anybody has an in depth understanding of when the identity spec invoice number is set, returned and incremented, please help. Is it the first time the update is tried, or when the update command completes successfully?
Private Sub Save()
    On Error GoTo ErrorHandler
    iRecLockReTry = 0
    Dim rs As ADODB.Recordset
    Dim sSQL As String
    Set rs = New ADODB.Recordset
    sSQL = "SELECT * FROM [Sales Invoices] "
    sSQL = sSQL & "WHERE [Invoice Number] = " & udtProps.InvoiceNumber
    If cnCompany.State = adStateClosed Then
        cnCompany.Open
    End If
    With rs
        .ActiveConnection = cnCompany
        .CursorLocation = adUseClient
        .CursorType = adOpenDynamic
        .LockType = adLockPessimistic
        .Open sSQL
    End With
    If bNew Then rs.AddNew
    With rs
      ... (Values set here)
        .Update
        If bNew Then
            ' update ID property similar to below when adding record for first time
            udtProps.InvoiceNumber = .Fields("Invoice Number")
        End If
        .Close
    End With
    Set rs = Nothing
    Exit Sub
ErrorHandler:
    If Err.Number = otErrorDBUpdateConflict Then
'        Err.Raise 61002, sClassName, "Another user has updated this record while you were looking at it. You will have to recall the record and re-enter your changes."
        objError.ErrorHandle ERROR_CLASS_ID, otGeneralUpdateConflict, otErrorWarning
        'The way we are handling things I can't see how we would ever get this error. But Microsoft has it in as an error so it must be possible...
    ElseIf Err.Number = otErrorDBRecordLockConflict Then
        While iRecLockReTry < otErrorConstRecordLockRetry
            iRecLockReTry = iRecLockReTry + 1
            rs.Requery
            Resume
        Wend
'        Err.Raise 61001, sClassName, "Another User has this record Locked. Do you wish to Continue trying to update?"
         objError.ErrorHandle ERROR_CLASS_ID, otGeneralRecordLockConflict, otErrorWarning
   ElseIf Err.Number = otErrorDBDuplicateIndex Then
'        Err.Raise 61003, sClassName, "Unable to update this record because one of the fields has a duplicate index conflict. Please resolve the issue and try again."
         objError.ErrorHandle ERROR_CLASS_ID, otGeneralDuplicateIndex, otErrorWarning
    Else
'        Err.Raise Err.Number, sClassName & "." & "Save", Err.Description, Err.HelpFile, Err.HelpContext
         objError.ErrorHandle ERROR_CLASS_ID, otGeneralUnexpectedDatabaseError, otErrorFatal
    End If
With women, the TRUTH will not only NOT set you free, it will cause you a great deal of trouble.

What OS do you use?
There was an issue in the past with XP..
ADO Recordset AddNew/Update Identity Problem.
So run
SQL Profiler to check what's going on.

Does the sp8 performance pack work for Solaris?

I'm finally building our QA environment today, and I'll be setting up a
Solaris cluster...
I've just seen that the Linux and HP-UX performance packs no longer work as
of sp8. Is anyone using them successfully on Solaris?
thanks,
John Stotler

The iPod FAQ does not exclude the mini when referring to the World Adapter Kit.
(10721)

Does the 80w power adapter work for the 13" mackbook pro?

Any help would be appreciated... Thanks

You can use the power supply that came with your Mac or one that has a higher wattage, but not one with a lower wattage.
Specifically, in my home we have only 85W power supplies. They work fine with the older 17-inch Macbook Pro, a newer 15-inch Retina Display Macbook Pro, and with my daughter's Macbook Air 13-inch (which came with a 45-watt power supply that she leaves in her dorm room because she knows she can use these 85-watt ones when she visits).
The older style power supplies' magsafe plug can charge the older laptops as well as the newer Retina Display computers, but for the Retina Display laptops, you must use the small magsafe adaptor/converter along with the older style power supply.
I don't know of a way to use the newer power supplies that came with Retina Display laptops on an older laptop that accepts the older style magsafe adaptor.
If your original question was whether a power supply for a Retina Display computer can be used to charge a non-Retina Display 13-inch Macbook Pro, then I think the answer is NO because the Retina Display Macs use a different magsafe plug that won't fit into the slot for the 13-inch non-Retina laptop. The older power supplies CAN be used with the new Retina laptops because there is an adaptor one can get to allow the old magsafe plug to fit into the new Retina laptop.

How does the "On Sale" option work for e-commerce?

I can't seem to find any documentation for this. What code is required & how do I set this up please?

As mentioned in the other post,
It is a tick and a tag that is true or false.
You have to manually change the product price to indicate it is lower price and then use the tag and CSS to style. It is not what your thinking it is with dynamic price changing

Does the Viber app really work?

I live in SA and have family living overseas. It would be great to be able to phone them at no cost!

No. The description says Compatible with iPad. Requires iOS 3.2 or later. It would say iPot Touch if it was compatible.

Does the shuffle 2G cable work for shuffle 3G?

If I try to connect my iPod shuffle 3G with a shuffle 2G cable, will it work perfectly?

ChunShu wrote:
If I try to connect my iPod shuffle 3G with a shuffle 2G cable, will it work perfectly?
No. Even though they look almost identical, they are different. Meaning it will not work. Sorry.
B-rock

Recently bought airport Extreme and have connected the device to the modem. WIFI works. However when I connect the LAN port to a switch I do not see the LAN printer and my NAS. Which setting do I miss?

I have installed my Airport Extreme and have conencted it directly to a modem. WIFI works fine. However I do not see my LAN network (printer. NAS,..).
Analysis:
Scen#1: When I connect the LAN port of the Airport Extreme to a switch (as input) and connect the other LAN devices also to the switch, those LAN devices do not have access to the internet. Also connecting the iPAD with WIFI to the Airport Extreme I cannot find my LAN printer and other devices.
Scen#2: When I connect the LAN port of the Airport Extreme to a router X (as input) and connect the router X to the same switch, and the LAN devices to the switch, those LAN devices do have access to the internet. Also connecting the iPAD with WIFI to the router X I can find my LAN printer and other devices in the LAN network.
Question what has impacted the behaviour of the Airport Extreme, not to detect the devices in the LAN network. Why is the use of a switch directly behind the Airport Extreme not working (no internet access for the other devices and Airport Extreme is not the basis station for the LAN network)?

Your scenario #1 is a correct configuration and should work. It seems as though your Extreme is not acting as a router as I believe you intend.
Most likely, you need to reset your modem. Power it down and let it rest for a few moments. Some need longer than others. Then, I recommend you "hard reset" your Extreme (see below) and configure it again, after the modem has been reset. From then on do not change what is connected to your modem without powering it down first.
Once configured, confirm your Extreme's wireless network works as expected and that your iPad and every other wireless device can load web pages. Then, connect the printer directly to one of the Extreme's LAN ports and confirm that it works as well. After that it should work equally well with a switch between it and the Extreme, as should every other wired device connected to the switch. This assumes your switch is an unmanaged device requiring no specific configuration.
Scenario #2: Having a router connected downstream of another is not a normal configuration, so don't pursue that as a solution. It will only distract you from determining the problem. If you want to repurpose Router X as another device do so only after everything else is working to your satisfaction.
To "hard reset" an AirPort Base Station: make sure it's powered up, then press and hold its tiny reset button and keep it depressed for five to ten seconds, long enough for its LED to flash amber rapidly. Release the reset button. Then, the LED will glow amber steadily for about a minute. Then, it will flash amber, slowly, about once every second or two, waiting for you to configure it with AirPort Utility.

When using an airport extreme to extend a wireless modern, will the lan ports work?

When using an airport extreme to extend a wireless modern, will the lAN ports work?

The AirPort Extreme can extend the wireless signal from another Apple wireless router. When it does, the Ethernet ports on the extending AirPort router are enabled.
Apple's "extend" feature appears to be a proprietary Apple function, so it would be extremely unlikely that an AirPort Extreme...or any other Apple router....could extend a 3rd party router product wirelessly....if that is really what you are asking here.

Does the LAN port really work for wired internet?

Similar Messages

Maybe you are looking for