Does the Note 4 have better signal strength than the Note 3?

I have a note 3 that continually drops calls and bounces from 4 bars to 1 bar over the course of time with the phone being stationary.  I believe my problems started with the last software update (as documented in numerous forums) but both Verizon and Samsung give no credibility to problems raised on internet forums.  The people on these forums apparently "lack technical expertise" was my take on their explanation. 
So far they, Verizon, is following exactly the same course of action to try to correct my issues as other folks have stated they tried with tech support.  Replacement of the SIM card did nothing.  Software reflash is next followed by a factory reset with no additional apps allowed to download to the phone. 
I have not looked at a Note 4 nor do I know anyone that has one so I am reaching out for information.  What is the Note 4 running for software and if you owned a Note 3 previously did you experience signal strength issues where you felt you shouldn't have?  If you had, or have, weak signal strength were you able to compare it to another android phone on the same carrier to see if the problem was specific to you phone?
I understand the bars are not the best indication of signal strength but they are a quick indication.  Under the mobile networks I usually have -100+ dBm and 30 +asu.  If it is a software caused problem neither Verizon or Samsung knows anything about it which is good news because they should be able to correct it.  I have my doubts the people on the forums are the crackpots they make them out to be.  I suggested they are people like me who are desperate for help with a problem Verizon gave up on. 
If the Note 4 is better I know what to ask for when they hit the end of the road with me.  That will happen software and reset wise in the next week then I am off to "getting someone else's problem phone" sent to me for a swap.  Last time they tried this the junk phone they sent didn't even recognize the sim card! 
Thanks for any facts you can provide about your experience with the Note 3 and Note 4 as related to signal strength in both areas with strong and marginal service.

I have an iPhone 6 on Sprint for work and it stinks, I don't like the service or the phone.  Had an iPhone 5s prior and although I didn't care for it it was still better than the 6.
I had a software reflash done at Best Buy and a factory reset at Wireless world.  Reflash went smooth but I should have done the factory reset myself or had Best Buy do it.  It will take me days to get the phone back to where I had it.  Kies software from Samsung does backup the phone but you lose all the changes you have made to the Home screens and some other apps need attention to get them functional. 
Signal strength remains the same but need to use it for a few days to know if it still drops calls and breaks up.  If it does next on the list is running in safe mode for a few days to see if an app is causing it.  If the problem still persists I have the choice of replacing it with insurance, money out of my pocket.  Sending it to Samsung for testing and repair (if necessary), or having Verizon send a replacement refurbished phone.  Probably will go with the refurbished phone and hang on to mine for a few days as well.  If the refurb isn't any better I will return it and then send mine to Samsung. 
According to Wireless World the insurance company will pay me for my phone if I trade it in before a year is up.  May get up to 50% of full retail.  Not sure what to trade it in for if I go that route.

Similar Messages

  • Battery , time , signal strength bar is not getting displayed in home screen , these will be displayed only when i click on any app. Can u let me know the setting change ?

    Battery , time , signal strength bar is not getting displayed in home screen , these will be displayed only when i click on any app. Can u let me know the setting change ?

    Did you check the Zoom setting?
    Have you tried a reset (reboot)? Hold HOME and SLEEP until an Apple logo appears.
    If it isn't Zoom and a reboot doesn't help try Settings/General/Reset - Reset all settings

  • Why does my clip have a higher quality in the viewer than the canvas?

    When I am editing, I have noticed that sometimes my images and clips have a drastically higher quality in the viewer than the canvas/timeline, what is causing this, and how do I edit and export my films with the highest quality possible?

    >Why does my clip have a higher quality in the viewer than the canvas?
    The answer is very simple; the Viewer shows the media at its native resolution while the Canvas shows the media at the Sequence resolution.  I'd bet that in your case, the original media is of higher resolution that the Sequence in the Timeline.
    -DH

  • Error: X "does not have permission to write to the application's directory! Are you running off a disk image? If not, ask your system administrator for help."

    I have received to following error from at least three different applications when they have attempted to auto-update recently: X "does not have permission to write to the application's directory! Are you running off a disk image? If not, ask your system administrator for help." 
    I am not running off a disk image and I have admin privileges... Not sure what the problem is, but it just started happening (a week or two ago) and I have never previously had a problem with these applications auto-updating.  I have repaired permissions and attempted other "fixes" found on the interweb, but nothing works.  Also, this is only happening on my iMac (27" Intel i5) and not my MacBook Pro (17" Intel i5) -- both are running Lion.  Please help!

    If you updated using the default install (merge) from before Tiger, you may be seeing an issue that we saw when Leopard first came out last year.
    Not sure of the fix - it was not simple - but if you search back in these forums you might find something that will help. I believe it deals with the numbers assigned to accounts (501, etc).
    If you open your Accounts Preferences and unlock the padlock, right-click Advanced Options and read your User ID and Group ID. Let us know what they are.
    Now, in the other user admin account, do the same thing.
    One of the real experts who knows much more about this than I may be able to then help.
    And be sure to check out this article
    http://pinkmutant.com/articles/Leopard/leobugs.html

  • My iPod touch 4th gen. Keeps giving me the error message "cannot connect to the app store when I sign in. I can open the app store and browse it but I can't download anything. I have full signal strength with my wi-fi and safari is working perfect.

    My iPod touch 4th gen. Keeps giving me the error message "cannot connect to the app store when I sign in. I can open the app store and browse it but I can't download anything. I have full signal strength with my wi-fi and safari is working perfect. I turned it off and restarted it 3 times now. I have an iPad 2 and the app store works flawlessly with it. What is going on?

    Same here on my lpad2. Can access the web just fine from browsers but cannot install new apps or updates in appl store.  Seeing a few others reporting same issue tonight so likely an apple server issue and staff will notice it in network monitors and fix it...sometime this weekend.
    Rob

  • I purchased the multi-user iworks and recently had to replace my white imac's hard drive but didn't pay to fix the CD drive.  My iworks does not have a serial number on the box and now that my CD drive isn't working how can I reinstall this software?

    I purchased the multi-user iworks (yes back when it was new, 2009 or 2010 and recently had to replace my white imac's hard drive (but didn't pay to fix the CD drive).  My iworks does not have a serial number on the box and now that my CD drive isn't working how can I reinstall this software?

    Buy or borrow an external USB optical drive.
    See the confirmation email or covering letter to obtain the serial number. If you have lost it, contact the supplier.

  • I just purchased a camera packaged with Adobe photoshop Elements 11. I have a mac book air- which does not have a cd drive. The package did not come with a code or anything that would provide me with another way to install photoshop that came with my came

    I just purchased a camera packaged with Adobe photoshop Elements 11. I have a mac book air- which does not have a cd drive. The package did not come with a code or anything that would provide me with another way to install photoshop that came with my camera. Is there any other way i can install this on my camera without using the provided cd or buying the software again?

    That doesn't help the user with the serial code though.
    There has to be some kind of code somewhere within the package. The disk itself does not contain one. You can look here for help with finding your serial number:
    Find your serial number quickly

  • HT5232 does ipad mini have a usb port? if not then how can i share my documents with devices other than apple?

    does ipad mini have a usb port? if not then how can i share my documents with devices other than apple?

    Wireless Flash Drive (tap to enlarge image)

  • Enable Audit on SCOM Agent An exception was thrown while processing Submit Tasks does not have sufficient permission to perform the operation.

    Hi All,
    An exception was thrown while processing Submit Tasks Domain\"SDK Account" does not have sufficient permission to perform the operation.
    am getting this error when try to enable audit in one of Domain controllers.

    Dear Mark,
    i face similar problem before, i had resolve it be adding SDK service account to Operation Manager Administration group.
    Regards, Ibrahim Hamdy

  • I purchared an iPhone 4s from Dubai and it does not have FaceTime on it.  The phone is now used in Europe. How do I get to instal FaceTime please?

    I purchared an iPhone 4s from Dubai and find that it does not have FaceTime on it. 
    The phone is now used in Europe.
    How do I get to instal FaceTime please?

    The iPhone from Dubai will never be able to have FaceTime. The iPhone country of origin (serial no. and imei no.) is the culprit. The government there has banned FaceTime.

  • Item no does not have a Variable Cost on the Cost Detail screen

    Hi,
    Item no does not have a Variable Cost on the Cost Detail screen. If you use the Product Cost Model, it does have a variable cost. We need to determine the reason for this nonccost. Any idea of what would be the reason is.
    Thanks,

    Hi Friends,
    I, my self resolved the issue. by considering the following 3 rd strategy in
    For Activity Type/Processes: Considered 3rd strategy as below:
    Activity Types/Processes: 1 plan Price for the Period, 6 Most Up-to-date Plan Price
    and 2 Plan Price as Average of All Fiscal Year Periods.
    Now it has been resolved.
    Thanks all.
    Now it is closed.
    Vemula

  • HT4623 My ipad 2 does not have a software update in the general setting. Can I still update it and if so how?

    My ipad 2 does not have  a software update ing the general setting. Can I still update it and if so how?

    That is only a feature of iOS 5 or later...
    You have iOS 4... See Here...
    http://support.apple.com/kb/HT4972
    OR...
    Connect to iTunes on the computer you usually Sync with and “ Check for Updates “...
    See the Using iTunes Section Here...
    How to update your iPhone, iPad, or iPod touch

  • Why the iphone 4 does not have sound when I watching the recorded video?

    why the iphone 4 does not have sound when I watching the recorded video?

    Have you turned up the volume?
    Try the buttons, or the bottom audio slider.
    Does your phone normally play audio?
    And have you tried to record and audio note to check if your microphone is not faulty.

  • Not getting any signal out from the NI9472 cRIO

    I want to generate PWM signal from the NI9472 in cRIO.
    I made a vi which (I think) should generate the pulse in the DO0 port.
    but when I measure DO0 with oscilloscope, I get nothing out from it.  (The LED comes up in NI9472 that channel 0 is active)
    Is there anything I am doing wrong here? (I attached the project and block diagram in jpg)
    Thank you so much.
    Attachments:
    PWM.zip ‏100 KB
    121.jpg ‏54 KB

    Hi hinewwiner,
    Overall, your implementation looks good. I think it might be worth your while
    to look at two other examples of PWM I found on our website which may be more
    efficient and more accurate. Another important thing to not about the 9472 is
    that it must have an external power supply connected to it for any output to occur.
    If you do not have any supply, the channel may be switching (and thus the
    channel LED will show activity,) but you will not see any change in output
    voltage. Also note that the LED should be off when the channel is not switched,
    and on when it is switched. So if you run your PWM at a slow enough speed, you
    will see the light turn on when the pulse is high and off when the pulse is low
    (at the rates shown in your attached project, your eye will probably not be
    able to discern a change.) It may also be helpful for you to describe exactly
    what the LED is doing to get a better idea of whether the code has stopped in a
    channel closed position, or if it is simply changing very fast.
    Another slight possibility is that the unit has experienced an over current
    condition. Because the module has automatic over current protection, if it is
    exposed to a current greater then 13A, the unit will open the channel switch
    and wait for a reset. This may have occurred, and the activity light will still
    show normal operation. To ensure that this condition is removed, simply reset
    the channel, or disconnect and reconnect the external power supply.
    For testing purposes, it may also make sense to simplify your VI by removing
    the case structure, start button, stop button and outside while loop. You can
    then simply start the VI in your real time controller, and stop the VI using
    the abort command given in your real time code.
    Here are two great resources for creating PWM functions in FPGA.
    Developing a PWM Interface using LabVIEW FPGA
    Pulse Width Modulation Example DAQ Personality
    Sincerely,
    Asa Kirby
    Applications Engineer
    National Instruments
    Message Edited by Asa_K on 05-20-2008 12:22 PM
    Asa Kirby
    CompactRIO Product Marketing Manager
    Sail Fast!

  • Is there a better external drive than the one Apple offers?

    Hello all,
    I've got the 15" Macbook Pro with Retina display, and of course I don't have a disc drive, was just wondering if there was a better quality drive than the one Apple offers? I will be using this drive to burn audio onto CDs if that helps (I DJ)
    ***Sidenote: I have no problem with paying for or using the Apple one, I just didn't want to get it to then find out that another brands' drive does the same or a better job for less money
    Thank you all in advance,
    Ryan Huff

    I actually have been reading some stuff online and came here after mixed reviews, I guess it's a very subjective topic,
    Like I said I've got no problems with the apple one, thank you for your help!

Maybe you are looking for

  • Text Wrap not working in Muse (CC 2014)

    I'm attempting to wrap text around a slideshow.  I have already inserted the slideshow in the text box, used the wrapping options to justify to the left, with the text running to the right and beneath the slideshow.  In the design layout, it shows up

  • ITunes does not sync all my songs

    I recently decided that it would be nice to have all my songs on my Android device as well as on my iPad & iPod, and to do that I needed to have all my songs synced with iTunes on my computer. I completed the update to version 11.3.0.54 but my librar

  • Key backspace and delete work with JDK1.3.1 and not with JDK1.4

    In JCTable, keys backspace and delete are not working with JDK1.4. It works with JDK1.3.1.

  • Memory leak on latest Adobe Reader 8.1.2 Win XP SP2

    Dear Adobe Developers, I have encountered a strange problem. I open a PDF file of size about 16.5 MB, I search trough it and then the memory allocated starts steadily growing until it fills out the entire RAM and the virtual memory as well. Strange t

  • Setting Up SAP JVM in Eclipse IDE: JRE name is already in use

    In documentation "Setting Up SAP JVM in Eclipse IDE" (https://help.hana.ondemand.com/help/frameset.htm?7613eaad711e1014839a8273b0e91070.html) a definition for a JRE must be added, although in step before that one a JRE has been created. If one tries