Does the SCOM 2012 agent "look back" in the logs before the service was started?

Does the SCOM 2012 agent "look back" in the logs before the service was started?<o:p></o:p>
We raised this question to our Microsoft rep back when we migrated to SCOM 2007. We wanted to know if SCOM would alert on errors generated before the Heath Service started. For example, errors
logged before the service is started on reboot (which is when some critical errors are logged). We also wondered what happens when the service is restarted...would errors during the same window be missed?
If I remember correctly the MS response was that the agent looks back on startup/restart based on a timestamp of some kind. We did some testing that seemed to confirm this information. I've
recently encountered several instances of errors generated while the service was stopped (primarily during boot up) where SCOM failed to alert on the error.
Can anyone confirm how the SCOM 2012 agent deals with errors generated before the service starts on boot and during service restarts?

I would suspect it's with watermarks as it has been in the past. What you should look into is if these alerts you were expecting are event based, and if there are rules set to alert for these conditions. If so, and you don't get an alert,
then you can bring that up with your msft rep. However, they should be caught.
Regards, Blake Email: mengotto<at>hotmail.com Blog: http://discussitnow.wordpress.com/ If my response was helpful, please mark it as so, if it answered your question, then please also mark it accordingly. Thank you.
There is a watermark. If the agent has been down for a significant period of time, the watermark may not apply, as the log would have rolled - but the entire log will still be processed regardless of what has already been discarded in the log. This may cause
some problems if a monitor picks up an unhealthy state, and the healthy state log entry has already been flushed. In this case, you need to reset health on that particular monitor, or just flush the cache on the agent to start anew.
Jonathan Almquist | SCOMskills, LLC (http://scomskills.com)

Similar Messages

After clicking on hyperlinks on the home pages of Yahoo, NY Times, and other websites, the browser will not go back to a page before the current one either by clicking on the go back icon or via the backspace.

I'm using Firefox 4.0 pm a Windows7 OS.

Vishal,
1. How do I access application level items like F119_THIS_PAGE_ID in pl/sql ? I tried F119_THIS_PAGE_ID,:F119_THIS_PAGE_ID,&F119_THIS_PAGE_ID. but all failed.What do you mean by "in pl/sql"? In a PL/SQL Expression condition you can use: if :F119_THIS_PAGE_ID <> :APP_PAGE_ID but in a PL/SQL stored procedure you have to use: if v('F119_THIS_PAGE_ID') <> v('APP_PAGE_ID') .
2.How to set a condition for computation#2 that it should only fire if F119_THIS_PAGE_ID <> :APP_PAGE_ID. I tried expression 1 <> expression 2, current page <> expression 1 but nothing seems to be working
Condition type: PL/SQL Expression as shown above should work.
3. Lastly, is this the best or the only way of doing something like this, any suggestions ?
Looks ok to me. Sometimes javascript:window.history.go(-1) can be useful.
Scott

SCOM 2012 Agent - Best Practices with Base Images

I've read through the
SCOM 2012 agent installation methods technet article, as well as how to
install the SCOM 2012 agent via command line, but don't see any best practices in regards to how to include the SCOM 2012 agent in a base workstation image. My understanding is that the SCOM agent's unique identifier is created at the time of client installation,
is this correct? I need to ensure that this is a supported configuration before I can recommend it.
If it is supported, and it does work the way I think it does, I'm trying to find out a way to strip out the unique information so that a new client GUID will be created after the machine is sysprepped, similar to how the SCCM client should be stripped of
unique data when preparing a base image.
Has anyone successfully included a SCOM 2012 (or 2007 for that matter) agent in their base image?
Thanks,
Joe

Hi
It is fine to build the agent into a base image but you then need to have a way to assign the agent to a management group. SCOM does this via AD Integration:
http://technet.microsoft.com/en-us/library/cc950514.aspx
http://blogs.msdn.com/b/steverac/archive/2008/03/20/opsmgr-ad-integration-how-it-works.aspx
http://blogs.technet.com/b/jonathanalmquist/archive/2010/06/14/ad-integration-considerations.aspx
http://thoughtsonopsmgr.blogspot.co.uk/2010/07/active-directory-ad-integration-when-to.html
http://technet.microsoft.com/en-us/library/hh212922.aspx
http://blogs.technet.com/b/momteam/archive/2008/01/02/understanding-how-active-directory-integration-feature-works-in-opsmgr-2007.aspx
You have to be careful in environments with multiple forests if no trust exists.
http://blogs.technet.com/b/smsandmom/archive/2008/05/21/opsmgr-2007-how-to-enable-ad-integration-for-an-untrusted-domain.aspx
http://rburri.wordpress.com/2008/12/03/untrusted-ad-integration-suppress-misleading-runas-alerts/
You might also want to consider group policy or SCCM as methods for installing agents.
Cheers
Graham
Regards Graham New System Center 2012 Blog! -
http://www.systemcentersolutions.co.uk
View OpsMgr tips and tricks at
http://systemcentersolutions.wordpress.com/

SCOM 2012 Sp1 Cu4 Web Console issue logging

Hi I am having an Issue with the SCOM 2012 sp1 Cu4 Web console,
When logon to the web console its Says Singing IN,
And the loops on Initializing....
after a while I get this error,
Please provide the following information to the support engineer if you have to contact Microsoft Help and Support :
System.TimeoutException: [HttpRequestTimedOutWithoutDetail]
Arguments:
http://localhost/OperationsManager/Services/DataAccessService.svc
Debugging resource strings are unavailable. Often the key and arguments provide sufficient information to diagnose the problem.
See
http://go.microsoft.com/fwlink/?linkid=106663&Version=5.1.20913.00&File=System.ServiceModel.dll&Key=HttpRequestTimedOutWithoutDetail ---> System.Net.WebException ---> System.Net.WebException
   at System.Net.Browser.BrowserHttpWebRequest.InternalEndGetResponse(IAsyncResult asyncResult)
   at System.Net.Browser.BrowserHttpWebRequest.<>c__DisplayClassa.<EndGetResponse>b__9(Object sendState)
   at System.Net.Browser.AsyncHelper.<>c__DisplayClass4.<BeginOnUI>b__0(Object sendState)
   --- End of inner exception stack trace ---
   at System.Net.Browser.AsyncHelper.BeginOnUI(SendOrPostCallback beginMethod, Object state)
   at System.Net.Browser.BrowserHttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
   at System.ServiceModel.Channels.HttpChannelFactory.HttpRequestChannel.HttpChannelAsyncRequest.CompleteGetResponse(IAsyncResult result)
   --- End of inner exception stack trace ---
   at System.ServiceModel.AsyncResult.End[TAsyncResult](IAsyncResult result)
   at System.ServiceModel.Channels.ServiceChannel.EndCall(String action, Object[] outs, IAsyncResult result)
   at System.ServiceModel.ClientBase`1.ChannelBase`1.EndInvoke(String methodName, Object[] args, IAsyncResult result)
   at Microsoft.EnterpriseManagement.Presentation.DataAccess.Proxy.ServiceReference.DataAccessServiceClient.DataAccessServiceClientChannel.EndExecute(IAsyncResult result)
   at Microsoft.EnterpriseManagement.Presentation.DataAccess.Proxy.ServiceReference.DataAccessServiceClient.Microsoft.EnterpriseManagement.Presentation.DataAccess.Proxy.ServiceReference.IDataAccessService.EndExecute(IAsyncResult result)
   at Microsoft.EnterpriseManagement.Presentation.DataAccess.Proxy.ServiceReference.DataAccessServiceClient.OnEndExecute(IAsyncResult result)
   at System.ServiceModel.ClientBase`1.OnAsyncCallCompleted(IAsyncResult result)
I found that the only way to fix it previously was to completely remove IIS from the server and reinstall everything connecting to the Web Console, so far its not the best way to go as I keep getting this error after 2 days,
Can anyone tell me how I would even go about diagnosing this?
Kind Regards

Got the same issue again with Update Release 2 for R2,
then found this blog, but it did not help me, only guided me in a direction
http://thoughtsonopsmgr.blogspot.com/2013/12/quick-fix-register-aspnet-40-with-iis.html
What help me was to re-add the svc-integrated-4.0 by copying and pasting the info it, same with the ScriptModule-4.0.
Don't know why that worked for me but this is a funny issue,
I also don't recommend doing this, as it only worked for me.

How is called the Services "OpsMgr Health Service" in the SCOM 2012 and Client machine?

Hi,
Can anybody tell me how is called the Services of OpsMgr Health Service in the SCOM 2012?
I have installed the agent of scom2012 on my client computer. But I dont find any agent called "OpsMgr Health Service" on the Client machine?
Regards

Hi
If you look in the services.msc window then it is listed as the System Center Management Service. This is the display name.
The actual service name is HealthService
Cheers
Graham
Regards Graham New System Center 2012 Blog! -
http://www.systemcentersolutions.co.uk
View OpsMgr tips and tricks at
http://systemcentersolutions.wordpress.com/
The Ayman answer is god, It is called "Microsoft Monitoring Agent"

Scom 2007 and scom 2012 agent multi home

is there version limit for the agent multihom for scom 2007 and scom 2012?
In technet i found it for SCOM upgrade it mentioned need scom 2007 CU4 and above, how about for multihome approach for SCOM agent?
Besides that, instead of agent upgrade, could we perform agent uninstallation scom 2007 and reinstall scom 2012?
Thanks for your advice.

Hi Cylim,
You can upgrade your agents to SCOM 2012 only from SCOM 2007 R2 CU4. Please look at these helpful links:
http://blogs.technet.com/b/kevinholman/archive/2014/01/20/do-i-need-a-specific-cumulative-update-release-ur-in-order-to-upgrade-to-scom-2012-or-2012-sp1-or-2012-r2.aspx
http://blogs.catapultsystems.com/cfuller/archive/2012/05/31/quicktricks-multi-homing-an-agent-to-opsmgr-2012-scom-sysctr.aspx
http://blogs.catapultsystems.com/cfuller/archive/2014/04/02/multihomed-migrations-in-operations-manager-lessons-from-the-field.aspx
As Scott mentioned, you can uninstall SCOM 2007 agent and install SCOM 2012 agent on one or a few servers, and see if they report properly to both management groups SCOM 2007 and SCOM 2012:
http://dynamicdatacenter.wordpress.com/2012/10/15/om-2012-agent-report-to-scom-2007-not-r2-scom-2012/
Natalya

SQL version could not be verified error while installing the SCOM 2012 R2 reporting component

I have the below SCOM server roles in my SCOM 2012 R2 set up
1) All servers with Windows Server 2008 R2 SP1, MS - SCOM1, DB & DW - DB1, Reporting Server - DB2
2) All the DB servers with SQL 2012 SP1
3) Windows firewall is turned off on all the servers.
4) Success fully installed all the components except SCOM reporting.
While installing the SCOM 2012 R2 reporting component on DB2 ( Iam running this set up on the server where I instllaed the SQL DB engine and reportin services in Native mode. Configured the SQL reporting database and reporting URLs successfully in SQL reporting
configuration manager) getting the below error in the Rporting server instance page. Kindly advise.
I ran mofcomp.exe and there is no firewall restrictions. My account also has DB owner & sysadmin permissions.
Also tried re installing the SQL on Reporting server.
"The installed version of SQL Server could not be verified or is not supported. Verify that the computer and the installed version of SQL Server meet the minimum requirements for installation, and that the firewall settings are correct. See the Supported
Configurations document for further information".

Hi,
As far as I know, after installing SSRS, we don't need to configure the database and reporting URLs manully. When we install the reporting service for SCOM, it will configure those automatically.
If possible, you may re-install SSRS and then install SCOM reporting service.
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Deploying SCOM 2012 Agents to untrusted Forests/Domain

Can we deploy SCOM 2012 agents to untrusted forest/domain? I don't want to use SCCM 2012 for installing agents via package deployment. Pls suggest.
Regards,
Ravi

Yes, You can deploy SCOM Agent to untrusted domain manually and using Certificate.
For deployment scom Agent, you can refer below links
http://www.toolzz.com/?p=279
http://jimmoldenhauer.blogspot.com/2012/11/scom-2012-deploying-agents-to-untrusted.html
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali

If I did the IOS 8 update and didn't back my phone up before the update, does that mean all of my pictures are gone?

If I did the IOS 8 update and didn't back my phone up before the update, does that mean all of my pictures are gone? While I was doing the update it told me to plug my phone into iTunes. I did so and then it said my phone needed to be "restored" but it said I was going to get my pictures, messages, music and contacts back later on. Now being one day later I did not get any of that back.

If you don't have a backup then you can't get the data back.
It's not typical for an update to require a restore, but for a handful of people the update gets interrupted, and this happens.

HT1766 My mini Ipad is only 2 months old and it has frozen. The screen says that the ipad needs to be backed up on icloud but the touch screen has frozen and I can even shut it down. Suggestions

Does anyone know how to unfreeze a screen.
My mini Ipad is only 2 months old and it has frozen. The screen says that the ipad needs to be backed up on icloud but the touch screen has frozen and I can even shut it down. Suggestions

Try to reboot it. Hold down the sleep and home keys until you see the silver apple, about 20 seconds or so. It should reboot and work for you.

I have a G5 mac using ver 10.4.11 and a newer mac using ver 10.8.4 these are networked. using the new mac i looked up my my photo on the old mac. It then said you need to upgrade your library which it did. Now the old mac can not open the photos

I have a G5 mac using ver 10.4.11 and a newer mac using ver 10.8.4 these are networked. using the new mac i looked up my my photo on the old mac. It then said you need to upgrade your library which it did. Now the old mac can not open the photos and say that I need to upgrade my I photo to a newer version. The old mac has no more support from apple in software update so I am not sure where I should go from here. can I use new soft ware with the old mac

The other part of the upgrade message was a warning that once you upgraded you would no longer be able to open the library with the old version which is exaclty what you did and what happened when you choose to continue
The iphoto library needs to be upgraded to work with this version of iPhoto. Your photo library will not be readable by previous versions of iphoto after the upgrade. The upgrade process may take several minutes depending on the number of photos in the library. Cancel or upgrade.
So now your choices are to not use iPhoto with the previous version using it onky with the newer version, restore your backup from before you did this upgrade or purchase iPhoto Library Manager and use it to rebuild the library using the older version of iPhoto (instructions are on their web site) thereby downgrading it (without projects)
LN

HT201210 When iOS 6.0 updating my iPhone and connecting my iPhone to iTunes the only option I have, is to restore my iPhone. But ufortunately, I did not back up my iPhone before the updating. Is there any way I can avoid the restoring process? Rikke

When iOS 6.0 updating my iPhone and connecting my iPhone to iTunes the only option I have, is to restore my iPhone. But ufortunately, I did not back up my iPhone before the updating. Is there any way I can avoid the restoring process?

Once the Device is asking to be Restored with iTunes... it is too late to save anything...
To minimise loss... Connect to iTunes on the computer you Usually Sync with and Restore from the most recent Backup...
http://support.apple.com/kb/HT1414
Restore from Backup
http://support.apple.com/kb/ht1766

HT1918 i have recently moved from the uk to australia and cancelled my uk debit before the payment was processed for songs i bought in itunes. i have tried to edit my billing info with australian debit details but the site says 'invalid card' how can i fi

i have recently moved from the uk to australia and cancelled my uk debit before the payment was processed for songs i bought in itunes. i have tried to edit my billing info with australian debit details but the site says 'invalid card' how can i fix this?

Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

HT4854 Will the second computer receive updates if they are logged into the App Store with their own accounts?

Will the second computer receive updates if they are logged into the App Store with their own accounts?

No.
Each Apple ID stores its own list of software purchases.

Pass the username and password in URL to auto log in the application from SharePoint List

how to Pass the username and password in URL to auto log in the application from SharePoint List
I have a link in my SharePoint list when user try to open the link its asking username and password .i want to put username and password in URL to auto log in into that external URL from sharepoint
please help me it is possible

Check out
http://serverfault.com/questions/371907/can-you-pass-user-pass-for-http-basic-authentication-in-url-parameters
Kind regards,
Margriet Bruggeman
Lois & Clark IT Services
web site: http://www.loisandclark.eu
blog: http://www.sharepointdragons.com

Does the SCOM 2012 agent "look back" in the logs before the service was started?

Similar Messages

Maybe you are looking for