Does the voltage to temperature conversation require in usb 6008 using daqmx 8.5??

Another question need u all guy help.I currently using K-type thermocoupler for my project using usb 6008.Does the voltage to temperature conversation require in usb 6008 using daqmx 8.5? what is DAQ TEDS function use ? is it help us to convert?

You will need to factor the voltage per degrees C to get to reading in degrees, this is 10mv per degree V for the device mentioned in the post you previously made
http://forums.ni.com/ni/board/message?board.id=170&message.id=246200#M246200
TEDS - Transducer Electronic Data Sheet
A video about TEDS
http://digital.ni.com/demo.nsf/websearch/8e55de8fe6b5702686256e7c007a47b4?opendocument

Similar Messages

I'm going to europe for 6 months my question does the voltage change can burn my computer...? what do i need to buy to ensure my macbook is safe and sound?

i'm going to europe for 6 months my question does the voltage change can burn my computer...? what do i need to buy to ensure my macbook is safe and sound?

Read the small print on your power brick. It handles 110 - 240 volts automatically. All you need is a plug adapter to make your current wall plug fit the European wall sockets.

Happy Holidays. I have Adobe Actobat 7.0 Standard for quite a while, and I'm happy with it. I use it for mainly filings at the federal court. They require PDF. I use two computers in two different states for work. I realize my Adobe 7.1 is a few years

. I have Adobe Actobat 7.0 Standard for quite a while, and I'm happy with it. I use it for mainly filings at the federal court. They require PDF. I use two computers in two different states for work. I realize my Adobe 7.1 is a few years old, but sometimes I have difficulty using it with the other days downloading a boarding pass, and e filing at the USDC. . There's a problem with Adobe Flash, media, etc. and other Adobe programs, (which I use for downloading boarding passes for airlines, etc.) so basically I have to delete these other Adobe programs, besides the Adobe Acrobat 7.0 Standard if I want to 7.0 Standard to work. I periodically download the updates, but there's still a problem. My question is: Can or should I purchase another program to update the present Adobe Acrobat 7.0 standard, or just buy a new program such as the Adobe 11? Am I mistakenly doing something wrong, such as when I download? I'm an old valued customer so I don't want to spend a lot of money since I am replacing my Dell XP for a new computer now, and my other computer is a Dell Vista.
I'd appreciate your valued advice.

If you are getting a new computer (for a PC it would have Win 7 or 8), then you will need to purchase XI if you wish to continue using Acrobat. Acrobat 7 is not compatible with these systems (and probably the same for MAC systems), though sometimes workarounds are possible, though not easy to use. I guess the answer is to buy the new version. Try http://www.adobe.com/products/catalog/software._sl_id-contentfilter_sl_catalog_sl_software _sl_mostpopular.html, click on the Buy for Acrobat, and then select the version you want.

How does the URL of DataSocket constitute?And how to use it in LabWindows/CVI ?

Hi ！
There's a problem puzzled me some days.How does the URL of DataSocket constitute ? And how to use it in LabWindow/CVI ?
For example.I have downloaded a code in http://zone.ni.com/devzone/cda/epd/p/id/3787.I want to make it work properly.So I configure my DataSocket Server Manger according to the URL of this statement.
DS_Open ("dstp://weather.natinst.com/weather/current",
DSConst_ReadAutoUpdate, DSCurrentCallback, NULL,
&dsCurrentHandle);
My DateSockket Server Manger is configured as:
However,it could not work properly when I debug it.
There's a introduction at the top of the code."You may need to replace the references to weather.natinst.com to 130.164.140.10 if the DNS isn't working properly."So,I modified the statement into
DS_Open ("dstp://130.164.140.10/weather/current",
DSConst_ReadAutoUpdate, DSCurrentCallback, NULL,
&dsCurrentHandle);
but,it did work properly.
We want to communicate with other computers via the URL of DataSocket in LabWindows/CVI.Whereas,how could we make it ia the URL ?
If anyone could help me solve this problem,I would appreciate it very much !
Best regards.
xiepei
I wouldn't care success or failure,for I will only struggle ahead as long as I have been destined to the distance.

Hi !
Thank you very much for your reply! I will accept your advice.
Besides,I have another question.If I want to visit other computers or other websites，how does the URL of DataSocket I constitute ? Does the URL has any relation with the DataSocket Server Manger ？If does,how to configure the DataSocket Server Manager to let them connected.If they have no relation,how to use the DataSocket Server Manger ?
After all,I want to know how to use it in LabWinows/CVI ？
Thank you very much !
Best regards!
I wouldn't care success or failure,for I will only struggle ahead as long as I have been destined to the distance.

Does the New Imac 21 works as an external display using thunderbolt to thunderbolt cable plugged into a MacBook Pro?

Does the New Imac 21" works as an external display using thunderbolt to thunderbolt cable plugged into a MacBook Pro?

Hi there LDIMERY,
You may find the troubleshooting steps in the article below helpful.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
-Griff W.

Why does the aol desktop crash every time I try to use it

Why does the aol desktop crash every time I try to use it and how can I fix the problem.

I am having exactly the same problem with my iPhone 4 (running 6.0.1 (10A523)). I have rebooted several times since this started occurring but it doesn't change the behavior. It was also reporting a "storage almost full" error quite often when I still have 1GB - 3GB of free space. As a troubleshooting exercise I removed all my music so there is now 20.1GB free. The storage warning no longer appears but the same issue still persists with reminders. Help, please!

Does the AppleTV have to have an Internet connection to use Air Play?

Does the AppleTV have to have an Internet connection to use Air Play?

Is your iPad connected to a network? The TV needs to be connected to the same network. Do you have an internet router? If both devices are connected to it then they can also communicate directly.

Does anyone know how to comunicate with a USB port using labview 6?

Does anyone know how to comunicate with a USB port using labview 6?

Unfortunately, there is no way to communicate directly with a USB port before LabVIEW 7.0 and VISA 3.0. With the new releases, there are functions called "VISA USB Control In" and "VISA USB Control Out" that give you direct access to a USB port.
You can definitely communicate with DAQ, Serial, or GPIB devices that are connected through a USB port, though. This is done seamlessly through the NI-DAQ, NI-Serial, and NI-488.2 drivers.
Luke S.

Does the ipod touch itself need wifi in order to use find my iphone??

My ipod touch 4g got stolen and i have find my iphone turned on but my question is does the ipod itself need wifi to track it down?? I've tried so many times i played sound, i have a passcode lock on it, i even sent a message to my ipod... But i try to locate it, it says it's offline.it down?? if so there's no way to point to try to find it Right??

Change your iTunes (Apple ID) password along with any other password that was stored in the iPod. If any passwords are associated with credit cards, contact the CC company and get your card replaced (with a new number). If any passwords are associated with a bank or any other savings institution, contact them also and discuss approprate action with them.
The "Find my..." function is pretty much useless if the device is in the hands of a thief. All that is necessary is for the thief to connect to any computer with iTunes and "Restore as new."
The only real protection you have is with the personal information on the device rather than the physical device itself. This requires action before the device is lost/stolen. If the device has significant personal information, it should have a strong 8-digit (or longer) password AND be configured for automatic wipe in the event of ten consecutive incorrect password entries.

Does The New iPad have GPS receiver? Can I use it as car GPS navigate?

Hi, Does the New iPad have GPS receiver include as hardware? Can I use it as car GPS navigate?

If you get the WIFi+Cell model of iPad, then it does have GPS. You can use it for navigation if you purchase an app that provides downloadable maps. The built-in Maps app can work for navigation, but it doesn't provide turn-by-turn and requires an Internet connection to function and so usually isn't practical for in-car use.
Regards.

How can I get the voltage on a current source (I=0 A) using abm voltage?

HI, I'd like to export in Vout the voltage Vin using an ABM voltage source (see the picture below).
I don't want to use a nonlinear dependant source because I'm working with voltages of about 1 pV and nonlinear dependant sources degrade the results because of their input impedances (1 GOhms).
Thanks,

to reference voltages using the ABM sources, use the V(nodename) syntax.
So in your case, assuming the nodes on the left are IO1 and IO2, the expression would be "V(IO1)-V(IO2)", without the quotes
Max
National Instruments

What does the automatic document feeder tray do?how to use it in hp photosmart 7510

wht is the automatic document feeder tray for? how to use it?

The ADF is used to automatically feed a number of pages for scanning, copying or faxing. Paper is loaded into the ADF with the printed side facing up. When you then copy (or scan or fax) the pages will be automatically pulled into the scanner mechanism one at a time and then deposited in the output tray.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Download just the USB-6008 driver (DAQmx) ?

Hi
Is there a way to download only the driver for my USB-6008 application
? Which means that I don't have to downlaod the installer with MAX and
support for different programming enviroments ?
Regards
Daniel

Hello Daniel,
When you install NI-DAQ, you are given the option to include support for multiple software programming environments, and MAX as well. You do need to install MAX and support for the API that you will be using, like LabVIEW 7.1 for example, but you can choose not to install support for everything else, like LabVIEW 7.0, CVI/LabWindows, .NET, etc.
-Alan A.

Does the passcode on iphone 3 require changing after a certain time?

Is this correct as I couldn't find any reference to this on the manual? Thanks!

Note, though, that if your iPhone is set up to an account on a Microsoft Exchange server, the administrator of that server does have the ability to require the passcode to be changed at a specified interval, among other possible security restrictions. A stock iPhone set up to normal email accounts, though, is as Allan said.
Regards.

"RTD Voltage to temperature conversion" for temperatures below 0 degrees

NI gives us a conversion VI for temperatures above 0 degrees Celsius. I need a converter also for negative temperatures.
Where can I find such a VI or a method ?

Labviewguru and Filipe:
I found the following rather excellent reference on line as a PDF by
searching RTD+NIST+equation at:
http://www.data-acq.co.uk/pdf/CHAP-4.pdf
It has the NIST polynomial equations and technical descriptions for
various types of thermocouples and RTDs. I think it is just what you
are looking for.
You'll just have to slap them into a LabVIEW equation box and that
should be that.
Douglas De Clue
[email protected]
Labviewguru wrote in message news:<[email protected]>...
> Filipe,
>
> Gosh, I was interested in this one, and kinda curious myself why you
> couldn't convert temperatures below 0degC. I looked up RTDs in the
> Omega Catalog, and sure enough, they
go to at least -200degC.
>
> Would National Instruments be interested in a new algorithm that is
> capable of converting all temperatures? If so, I'll do the legwork,
> find the correct algorithm, and program it up.

Does the voltage to temperature conversation require in usb 6008 using daqmx 8.5??

Similar Messages

Maybe you are looking for