Does Time Machine/Migration Assistant successfully transfer software licenses for Microsoft Office and Adobe?

I have a MacBook that I purchased in late 2007.  It's been very good to me over the years.  However, I'm been having various minor issues, and tonight I noticed that the screen goes to black at about 45° as I'm closing my laptop.  In other situations I'd try to fix this myself, but right now I'm a Peace Corps Volunteer in rural South America and have limited access to the right tools, much less replacement parts.  So instead I'm taking it as a sign that my trustworthy companion is about to give up the ghost and I should get a new computer now, instead of completely running this one into the ground and potentially losing important documents, photos, &c.
My question is simple:  Does Time Machine and/or Migration Assistant successfully transfer licenses for Microsoft Office 2011 and for Adobe software?
My software installation disks are in a box in a basement in the United States.  And since I'm not quite sure which box it is (last summer I did not see the need to label my own boxes), I'm not going to ask some unsuspecting friend or family member to dig through all my posessions to find an alphanumeric code or two, especially if I can just transfer/migrate the license without it.
Many thanks.

Try the combo update on the old machine.
10.6.8 Combo Updater
If the 2 computers have the correct cable connections, try the Target Disk Mode.
Target Disc Mode

Similar Messages

  • Error "The Connection Failed" in Time Machine, Migration Assistant and Restore From DVD

    I am receiving this error when trying to connect to my Time Machine Backup in my Time capsule. I input the proper password to access my Time Capsule and It returns me to the screen with the caption "The connection failed" under the Time Capsule name in the "Select your Disk" screen. What would cause this error. I am connecting via WIFI (AirPort) and have full signal. I am using Mac OSX 10.6.8
    I recently had my 1TB hard drive replaced and I am attempting to restore using Time Machine, migration assistant or from the startup dvd (tried multiple ways, no success). The initial setup of mac OSX 10.6 would not let me connect or other attempts after erasing hard drive and reinstalling OSX from disk.
    Worked on it all weekend and don't have enough beer to drown the frustration, any help is appreciated.

    You are correct TM is not at all easy to do a full restore.
    To answer your question: Yes TM disk does show up in finder.
    After my initial startup setup I was able to start TM and access all my previous backups. I migrated some files and was able grab the data from finder. Not satisfied with that I tried to do a restore to that previous date, to no success. I then erased the HD and reinstalled OSx and tried again from the setup screen. That didn't work, sulked over some beers. I then tired with Migration assistant...same result (more beer).
    In starting TM after trying MA, only one backup was showing in the Star screen (today). None of my previous backups were showing. Since exiting TM it has been "Making Backup Disk Available" ( xGB of 6.29GB). Considering the size, I can only assume that these are my previous backups.
    I have reviewed Pondini's posts, FAQs, and tutorials. I am a little scared to try and locate the drives through Terminal as in Pondini's TS #6 guide. If I can get my previous backups to show up, I will be happy with dragging files from Finder to restore my data and slowly work at restoring my settings/applications.

  • Time Machine/Migration Assistant issues

    I just bought a MacBook Pro, and my old computer is a PowerBook G4. I did a Time Machine backup of my old computer onto an external hard drive, then used Migration Assistant to transfer the Time Machine backup from the external drive to my new computer. I had a few files saved on the new computer before I transfered from my old computer, and those seem to be gone now. My question is: when a Time Machine backup is 'migrated,' does it delete everything first?

    horseymichelle wrote:
    I just bought a MacBook Pro, and my old computer is a PowerBook G4. I did a Time Machine backup of my old computer onto an external hard drive, then used Migration Assistant to transfer the Time Machine backup from the external drive to my new computer. I had a few files saved on the new computer before I transfered from my old computer, and those seem to be gone now. My question is: when a Time Machine backup is 'migrated,' does it delete everything first?
    no, migration does not delete anything. you are just logged in as a different user now which is why you don't see those files. log out of the migrated user and log into the user you originally created on the MBP. those files are there. I suggest you move them over to the migrated account as most of your stuff is in there.

  • Restore from Time Machine / Migration Assistance Utility

    Sorry if this is obvious, but just want to restore wo further user complications.
    _Back story:_ 2006 iMac running Snow Leopard won't boot. Genius Bar determines HD needs reformatting. Reformats and installs OS v10.5.7, not Snow Leopard. Explained to follow new setup and when prompted select from Time Machine (external HD) and restore. At home I do, it won't. Everything is recognized (External HD, Time Machine, File), but tells me OS on machine older than Time Machine files and to upgrade iMac (and can try again from Migration Assistant Utility).
    Continue with prompted new setup and created User Account. iMac now ready and like new. Installed Snow Leopard. Run Migration Assistant Utility and select restore from Time Machine.
    Issue: External HD recognized by iMac but not by Migration Assistant Utility. Only selection choice is internal HD. Additionally when connecting external, always get prompted (separate prompt from Migration Assistance) if I want to setup Time Machine and I've been declining. Do I have to set up Time Machine before? It didn't require that when doing new user setup.
    Thanks for any and all assistance.

    Chad Krukowski wrote:
    Than you! that is what I wanted to do, a full restore. Unfortunately was following the direction of the genius bar.
    Yup. The Geniuses (like most Apple folks) don't actually use Time Machine on their work computers, and aren't real familiar with it, so this sort of thing isn't all that unusual, unfortunately. You could even have gotten similar advice from AppleCare, depending on the expertise of whoever you happened to get. Sigh.

  • Does Time Machine back up my Bookmarks, Favourites, my tool bar etc  and that sort of thing ?

    I'm backing up my Macbook Pro on Time Machine prior to installing Snow Leopard.  Does Time Machine back up things like my internet bookmarks, as well as my Toolbar ones?  If not, what should I do?

    It backs up everything. If you were to use it with Migration Assistant after a clean install, it should bring everything back. If you have an external drive though, a clone of the existing drive before a major upgrade is always a good idea. That way you could easily go back to exactly what you have now if you had a problem. Carbon Copy Cloner is the best solution for that.

  • Mac air with external hard drive - not being found on Finder, Time Machine, Migration Assistant

    I have been using an external drive (Imation Apollo) to access only, old files from previous computer (PC) on a new Mac Air.  I had not transferred them across to new computer (didn't want to do that)  just accessing them from the HD.  It had been working fine until recently.  Each time the external drive had been connected Time Machine would come up and ask if i wanted to use this drive for back ups, and I always chose 'Decide later'.  So, as yetI hadn't as yet configured Time Machine to do back ups.
    Recently I noticed that the extrnal HD was no longer showing up on Finder.  Slight panic as i have 5 or 6 yrs of work saved on that HD
    Further investigations - it's also not showing up either on on Disk Utility, or on Migration Assistant.
    I've done the following: 
    Tried HD in each of different USB ports  - made no difference, HD still not showing up
    Tested different Hubs in each port with HD attached - no difference HD not showing up
    Tried USB flash drives in the USB ports - These are working fine and show up on finder
    Tried the HD on other comptuters (a PC though, don't have access to another mac to do this test)- working fine, the HD is showing up and is accessable
    Interrogated the Console logs to try to see if the act of attaching the HD creates a log entry - couldn't find anything
    Rebooted computer via shut down, power disconnect - no difference
    Reset PRAM - no difference still not showing up
    Reset SMC - no differnce still not showing up
    So I think I have established that all the USB ports are functioning correctly and able to access other external drive devices, using hubs with external powersource is not the issue, identified that the external hard drive is working OK, and it appears that the Mac itself is functioning normally.
    What would be the reason the Mac now does not allow this specific external HD to be identified and accessed.  The only possible things I can think of are
    if I had in fact pressed 'Do not use' when Time Machine asked 'do you want to use this drive for back ups'.  Would that mean that the Mac now totally rejects this HD from being a source of accessible files - I hope not!
    I also think that my husband may have disconnected the hard drive from my computer to access some stuff and he just yanked it out rather than use the safe eject method.  Could this create an issue?  The Hard drive works fine on his PC.
    Why is my Mac Air now rejecting this HD and what can I do to access my historical files now. 
    Any assistance anyone can provide would be very greatly appreciated!
    Thanks
    Anna

    I can't answer why it isn't accessing it, but I have a slightly related issue w my back up drive starting to get noisy.
    Realizing that redundancy is safety for critical data.  I talked to my brother about my situation the other day & he said he has 3 small Western Digital portable HDs that he rotates for backup. He even keeps 1 in the safe deposit box.
    I have read for some time that we should have multiple back ups & also have our critical stuff backed up off site. Amazon HD reviews had a woman telling about how she was very backed up on multiple computers & hard drives, but they were robbed or burgeled & all of them were stolen including her thesis that was on the computers.
    Hard drives aren't that expensive. I just bought a new Western Digital 1 TB drive for $89.99. I plan to use it to back up the Seagate that is getting noisy & then maybe alternate them.
    Also, when I came back to Mac, I moved practially all of my documents to Mac. I think I just dragged & dropped or something. Photos, Office, & pdfs do fine that way. & then you could back them up to a couple of different external drives & remove from your MacBookAir.
    Unfortunately I think most of us do not back up until crisis & then it may be too late.
    Also use Time Machine. For the 1st time in my computer life, my computer is well backed up--although now realizing the need for redundancy so will start backing up to at least 2 different HDs alternatly.
    So, not sure why it isn't working & hopefully you have come up w a solution by now.
    I think what I would do in a situation like this, since you can access it on the Windows machine would be to transfer the data to the Windows machine & then transfer it back to a different back up.
    I'm looking into backing up what I still have in Windows using a thumb flash drive. I think it should all fit ok now that they have the larger drives & I don't have very much left in Windows format.

  • Restoring From Time Machine Migration Assistant (and other ??)

    Hello
    Please bear with me on this long question....
    For several reasons I reinstalled ML which involves erasing the HDD first.  I do have everything bakced-up to Carbonite and TM.  Carbonite is slow as molassess so I opted to try Migration Assistant/TM to restore my files.  MA does not allow you to choose an older (good) backup and the backup that was used was an incomplete one as evidenced by the photo library being incomplete.  Another poster had a similar question and the solution involved using the install disk.  There is no install disc since it was a download from the Apps store. 
    Carbonite has a tendency to freeze-up during a long download.  Restarting it brings your download back to the very beginning.  I'm not happy about Carbonite.  I've heard of SuperDuper and seems to have gotten good reviews.
    Questions:
    1.  Is there a method to access an older TM backup from MA?
    2.  Is there a better option that Carbonite?
    3. Is SuperDuper a good option for backups?
    thank you, Bruce.

    If your Mac shipped with a System Install DVD then boot from it and choose "Restore from Time Machine backup".
    If your Mac shipped with Lion already installed you should be able to use OS X Recovery. Boot while holding ⌘ R and choose "Restore from Time Machine backup".
    Either one should present a dated list of complete system backups from which to choose. Ideally it should be the most recent one, but if you have reason to believe it is incomplete (it should not be) then try an earlier one.
    You can also boot from a locally connected Time Machine backup volume. Make sure it is connected with USB or FireWire and boot while holding an Option key. This will invoke Startup Manager, from which you can select your Time Machine backup volume. It will present the same restore options as OS X Recovery.
    These options will be faster and should be less prone to difficulty than using Migration Assistant.
    Time Machine and "clone" software use very different philosophies. SuperDuper! is good, so is Carbon Copy Cloner. They are more customizable than Time Machine, whose customizable features essentially consist of an "on / off" switch
    Of course that is also its sole advantage over the others - it's boneheadedly simple to use.
    Forget Carbonite, as you learned it does not work well on Macs. I know of no similar offsite backup services to recommend.

  • Time Machine, Migration Assistant, and a BIG headache

    Set up my new rMBP from a time machine backup on external and worked great. I removed some applications from the dock that didn't transfer over successfully (i.e. Word 2004). I didn't include iTunes during the transfer.  Once time machine restore was complete, everything on the rMBP worked great.  I wanted to get my iTunes from the external and so I used the Migration Assistant to copy over JUST the music.  I unchecked all the boxes except Music.  Took over 1 hour just to copy over 30GB of music and so I was suspicious...
    After completion, I see that it copied over my music, BUT
         - all Documents gone
         - applications previously deleted WERE BACK (i.e. Word 2004)
    Went back to my old 2010 MBP to do another time machine backup, and signed into Mail....
    Signed into Mail on the rMBP....
    Got an email that my apple ID was used to sign into iCloud....
    Then now rMBP Mail can't access ANY of my email accounts....
    What in the world happened?  I just wanted to copy over my Music and now it's a BIG headache.....
    I knew I should have avoided Migration Assistant and should have transferred over Music upon initial setup of the rMBP....
    Tried to restore the rMBP from time machine but cannot b/c the time machine backup was done under snow leopard....
    So uninstalled Mavericks and reinstalling....1 hour wait to download...
    Then (hopefully) will restore from time machine (make sure to include Music this time)....which takes about 2 hours....
    So 3 hours just to get Music, when it should just be a simple copy/paste job....
    On the bright side, I got a Samsung display and so I'm happy with that...the display is sharp, evenly bright, and no creaking case

    Hey hp12c,
    Thanks for the question. The following article may provide the information you are looking for:
    Mac Basics: Time Machine
    http://support.apple.com/kb/HT1427
    Restoring specific files or folders
    Choose Enter Time Machine from the Time Machine menu and the restore interface appears. You can literally see your windows as they appeared "back in time."
    You can use the timeline on the right side of the window to reach a certain point back in time (the timeline shows the times of all backups on your backup drive). If you don’t know exactly when you deleted or changed a file, you can use the back arrow to let Time Machine automatically travel through time to show you when that folder last changed.
    Note: Dates in pink indicate the data resides on your Time Machine backup device. Dates in white indicate the data resides on your Mac. In OS X Mountain Lion and Lion, portable Macs have the feature of local snapshots. See this article for details.
    You can also perform a Spotlight search in the Time Machine Finder Window search field to find a file. Simply type the Spotlight search field and use the back arrow to have Time Machine search through your backups to find what you are looking for.
    Before you restore a file, you can also use Quick Look to preview a file to make sure its the one you want. Highlight the file and press the Space Bar to bring up a quick look.
    To restore, select the file/folder and click the "Restore" button. The file will automatically be copied to the desktop or appropriate folder.  If the file you are restoring has another file in the same location with the same name, you will be prompted to choose which file to keep or keep both.
    Thanks,
    Matt M.

  • Restore Conundrum, Time machine & migration assistant

    Hi All
    I have got myself in a bit of a pickle and would really appreciate some advice.
    My HD crashed and after trying to repair it I got an "Invalid Node Structure" message. Disk Warrior wasn't able to repair it but at least allowed me to copy the drive folders to my external firewire drive. I wasn't able to do an 'Archive & Restore' as the disk wasn't accessible and the only option was to erase the disk. I then re-installed from my Leopard startup disk and currently have 10.5.2 on my machine.
    when my machine crashed I was running 10.5.7
    My last Time Machine backup was 2 months ago and is 10.5.6 (and the partition map scheme was unfortunately MBR on the external drive!!!)
    What I would like to do is to restore my system from the TM backup and then update my data from the copied folders on my external FW drive that I copied with Disk Warrior. The problem is that migration assistant doesn't recognise the copied folders as the disk is not a start up disk. I am therefore in the process of using disk utility to create an image of the folders on the FW drive on another partition on that drive that has a GUID partition map scheme.
    Am I doing the right thing? what else should I do or to get back up and running with the most up to date data and system settings?
    This is my proposed sequence of activities:
    1. Restore system using my time machine back-up
    2. Use migration assistant to update data from the copied files disk image
    Many thanks

    I'm not sure how well the current version of Spotlight works with external drives, but you might try a Spotlight search of your backups, using the "Last Modified Date" criterion to help find files & folders you want to copy over to the startup drive. However, I think you will have to copy the files from the mounted disk image back onto some drive to do this because I don't think Spotlight works with disk images.
    For Mail, iCal, & some other apps, you can probably just replace the appropriate folders (like your ~/Library/Mail/ folder) on your startup drive with the corresponding backup ones. To be safe, I would use the backup options provided with these apps (like those mentioned in How to back up and restore your important Mac OS X 10.4 files) and/or make copies of the startup drive versions in case something goes wrong or you find that there are items in one folder that aren't in the other.
    Other possibly useful links:
    iCal, Mac OS X 10.5: Empty "Home" and "Work" calendars may appear after installing Leopard
    Mac OS X 10.5 Help: About application data and preferences
    I'm fairly sure some other user will have a more detailed answer for you....

  • Time Machine Migration Assistant HELP!

    My MacBook Air has a whole lot of storage that is being used for who knows what.
    I am going to back up my mac, erase it, and reinstall the backup because that seems to work. But, I have no idea what the differences and similarities in Time Machine and Migration Assistant is. Can I use migration assistant to back it up and reinstall on the same computer? If not, how do I install a time machine backup on a compeletely erased mac? (I'm on OS X Mavericks)

    Before you do anything else, I strongly suggest you figure out what's taking up the space.
    Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
    iPhoto ▹ Empty Trash
    To locate large files, you can use Spotlight. That method may not find large folders that contain a lot of small files.
    You can more effectively use a tool such as OmniDiskSweeper (ODS) to explore your volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one.
    Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
    Proceed further only if the problem isn't solved by the above steps.
    ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
    Back up all data now.
    If you have more than one user account, make sure you're logged in as an administrator. The administrator account is the one that was created automatically when you first set up the computer.
    Install ODS in the Applications folder as usual. Quit it if it's running.
    Triple-click anywhere in the line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The application window will open, eventually showing all files in all folders. It may take a few minutes for ODS to list all the files.
    I don't recommend that you make a habit of doing this. Don't delete anything while running ODS as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
    When you're done with ODS, quit it and also quit Terminal.

  • Time Machine - Migration Assistance Failure

    Hard drive failure on Mac... installed new drive.  When using migration assistant in conjunction with time machine encountering error mid way through data transfer process...unable to create user name.. any insight is appreciated..
    This event occurred during several attempts.

    Chad Krukowski wrote:
    Than you! that is what I wanted to do, a full restore. Unfortunately was following the direction of the genius bar.
    Yup. The Geniuses (like most Apple folks) don't actually use Time Machine on their work computers, and aren't real familiar with it, so this sort of thing isn't all that unusual, unfortunately. You could even have gotten similar advice from AppleCare, depending on the expertise of whoever you happened to get. Sigh.

  • Time Machine Migration Assistant?

    Right now I'm running on an old white model macbook and plan on buying a 27" iMac tomorrow and was wondering if I was to use migration assistant with my time machine back up would that over write everything on the new iMac? like the iLife '10 suite?

    Well first you would probably not be running Migration Assistant, when you turn on the new machine for the first time it will launch Setup Assistant and part of that is asking if you are transferring from another Mac. Simply follow the on-screen instructions and you should be set.
    However to answer your question neither Setup Assistant nor Migration Assistant will not overwrite newer software. For example the new iMac has ILife 11 (there is no such thing as iLife 10) on it and the old machine uses iLife 09 (or earlier) the Assistant is smart enough to detect which is the newer version and leave it where it's supposed to be.
    Roger

  • How to use Time Machine/Migration Assistant

    I have a 2008 Mac Pro that died.  I now have a 2010 Mac Pro.  The 2010 Mac Pro only has the original Apple software installed so far (updated to 10.6.8). 
    I have a Time Machine backup drive from the 2008 Mac, as well as an additional hard drive that may contain all or most of the data from the now dead 2008 machine. 
    Presently, I must use OS 10.6.8 because of my need to run some legacy software.  How do I use Time Machine from my 2008 Mac Pro to get my items on the 2010 Mac Pro? 

    Here is another point of view:
    Setting-up a new Mac from an old one, its backups, or a PC
    And another speedup to consider at this juncture:
    User Tip: Creating a lean, fast Boot Drive

  • Time Machine Migration Assistant - Calculating ...

    Hey,
    I've got a little problem - I recently got my iMac back from repair (the hard rive was failing).
    Now I am trying to put all may stuff from my time machine backup back on this machine...
    It came with 10.6. preloaded...However, when I start the migration assistiant and try to get the data from my external HD with the time machine backup, it quickly finds all settings and applications but it when it comes to my home folder, it just says "... calculating".
    This has now been the case for more than 72h. The full backup is about 750GB...how long should that normally take?
    Another strange thing, I can easily acces all the data from the "Latest"-link/folder on the time machine HD.
    Any tips besides waiting ?
    Cheers,
    Tim

    Hey Eric,
    thanks for you answer...I actually already made another account (with another name that is different from the name on my time machine). Or should I just call it admin?
    I am really stumped at the moment...I should have just used Carbon Copy Cleaner as it seems...

  • Time Machine, Migration Assistant, and copying specific files to a new machine

    Things were running fine. Then repeating kernel panics! A fresh Mountain Lion install seemed to fix things. To test whether the panics were related to some application or preference, how can I restore only my data, specifically the Aperture library, iTunes library, and iMovie library and nothing else from my Time Machine backup? In other words, how can I see the file structure of the Time Machine backup so I can copy only specific files and folders?
    Thanks for any advice!

    Hey hp12c,
    Thanks for the question. The following article may provide the information you are looking for:
    Mac Basics: Time Machine
    http://support.apple.com/kb/HT1427
    Restoring specific files or folders
    Choose Enter Time Machine from the Time Machine menu and the restore interface appears. You can literally see your windows as they appeared "back in time."
    You can use the timeline on the right side of the window to reach a certain point back in time (the timeline shows the times of all backups on your backup drive). If you don’t know exactly when you deleted or changed a file, you can use the back arrow to let Time Machine automatically travel through time to show you when that folder last changed.
    Note: Dates in pink indicate the data resides on your Time Machine backup device. Dates in white indicate the data resides on your Mac. In OS X Mountain Lion and Lion, portable Macs have the feature of local snapshots. See this article for details.
    You can also perform a Spotlight search in the Time Machine Finder Window search field to find a file. Simply type the Spotlight search field and use the back arrow to have Time Machine search through your backups to find what you are looking for.
    Before you restore a file, you can also use Quick Look to preview a file to make sure its the one you want. Highlight the file and press the Space Bar to bring up a quick look.
    To restore, select the file/folder and click the "Restore" button. The file will automatically be copied to the desktop or appropriate folder.  If the file you are restoring has another file in the same location with the same name, you will be prompted to choose which file to keep or keep both.
    Thanks,
    Matt M.

Maybe you are looking for