Does WDA support HTML Image Maps?

How to implement HTML image maps in Web Dynpro for ABAP?
Is the usemap (and related area shapes) available?
What I mean is explained by the following example:
<body>
<img src="trees.gif" usemap="#green" border="0">
<map name="green">
<area shape="polygon" coords="19,44,45,11,87,37,82,76,49,98" href="http://www.trees.com/save.html">
<area shape="rect" coords="128,132,241,179" href="http://www.trees.com/furniture.html">
<area shape="circle" coords="68,211,35" href="http://www.trees.com/plantations.html">
</map>
</body>
Thanks

Use IFrame UI element (if exists - hope yes) and link to it an HTML file with only your image-map.
If the image-map change by user, you must find the way to create the HTML in a dynamic way.
Sorry i haven't alot experience with ABAP, i did this in Java Web Dynpro but i guess you can do also with ABAP.

Similar Messages

IOS 6 issues still cannot connect to Internet from work access. Says browser does not support HTML redirect

My iPod touch cannot access wifi from work . I get message browser does not support HTML redirect . I've tried alot of suggestions nothing seems to work . Can anyone help me out with this . I also have been getting booted alot while trying to check out my App Store

What does your work IT staff say?
It might be related to this previous discussion.
https://discussions.apple.com/thread/4359363?tstart=0

Does RC1 support HTML 5

I am using Firefox 4 RC1 when I go to sites such as Google's human body, I am told the browser does not support HTML. Is there a way to enable in about.config?

Does WebGL show as enabled on the Help > Troubleshooting Information page?
Make sure that you have the latest update of your graphics display card driver.
You can also check the webgl prefs on the [http://kb.mozillazine.org/about:config about:config] page

HTML image mapping not working only on Firefox browser

On my website I have some images, which show fine, however the image mapping which is coded using html does not work (i.e. when you click on a certain area in the picture and it takes you to another page). This is working fine for IE, safari and chrome.
Any help / advice would be appreciated.

Try posting at the Web Development / Standards Evangelism forum at MozillaZine. The helpers over there are more knowledgeable about web page development issues with Firefox. 
http://forums.mozillazine.org/viewforum.php?f=25 
You'll need to register and login to be able to post in that forum.

ICal info window does not support html?

Greetings,
I have exported several files from WebCalendar (http://webcalendar.sourceforge.net/) to ICal and found that the "info" window views the html as code and not as actual content. I looked about for an option to possibly enable this, but I can't seem to find it. I'm suspecting ICal does not support this function.
Any info you can provide is greatly appreciated.
- Jeff Tovar
G5 Mac OS X (10.4)
G5 Mac OS X (10.4)

OK, got that thank you.
If I understand the iCal specification correctly, this is not a compatible ics file. The contents of the DESCRIPTION should be text, not requiring interpretation. Your sample includes html tags - a browser will interpret them rather than display them, but ics files should just have plain text. So iCal is correct in showing you what it gets, rather than attempting to interpret the html markup tags.
You need to find a way for your webcalendar to export the file without markup. Note that you can't put a link (as you are attempting) in the Notes (DESCRIPTION) field - it will just be displayed as text. Even if you put something in the URL field, you can't directly click it, you have to click on the URL label and select go to location.
So, in short, the answer to your original question is that iCal info window does not, and is not supposed to, support HTML.
AK

Does jheadstart support HTML editor

Hello,
In my application, I need to allow users to entered html formatted text, I change one of my text fields to have a display type of editor. This allows the user to enter text. However when I view this text in another part of my application using the outputformatted component, the text is not formatted. When I check the contents of the data. The text has control characters to format the text instead of html tags. Is there a way to use the simple html editor in Jheadstart for text fields.
Regards
Orlando

Our users are only entering a small amount of html content such as p, ul and li tags. The application in an examination system, and the administrators enter their formatted question text.
So I thought I could use the editor for the display type. However it does not seem to be the same cutdown htrml editor you see in the standard ADF input components.
If we use the editor for the display type for entering the question text. Which component do we use to see the results when a user is taking the exam.
As you suggest, do I use an outputText with escape="false"?
Thanks in advance.
Edited by: orlandok on Nov 9, 2010 9:31 AM

Does Dreamweaver support Html 5

Is it possible to code in Html5 in Dreamweaver.

If you have the coding skills, you can use any version of DW to code an HTML5 document.
http://coding.smashingmagazine.com/2009/08/04/designing-a-html-5-layout-from-scratch/
Keep in mind that HTML5 is still a work in progress.
To measure how well your browser(s) support HTML5, visit this site:
http://html5test.com/
To support legacy browsers like IE6 & 7, you will need to include the HTML5 shiv JavaScript in your HTML5 docs:
http://html5shiv.googlecode.com/svn/trunk/html5.js
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/

Does firefox support graphical hotspot maps

We have a browser based application written in java with graphical hotspot maps. The application runs in the Internet Explorer browser but not in firefox?

A good place to ask questions and advice about web development is at the mozillaZine Web Development/Standards Evangelism forum. 
The helpers at that forum are more knowledgeable about web development issues. 
You need to register at the mozillaZine forum site in order to post at that forum. 
See http://forums.mozillazine.org/viewforum.php?f=25

What are the best tools for converting .shg files to HTML image maps?

After trying several different ways to import our WinHelp
project into RH HTML, I'm left with recreating the project in HTML.
There are over 200 .shg files. What's the best tool for converting
them? Is there a free program that converts them? Or is there a
better way?
Lacona

Yes, I have not been able to import the .hlp file, which was
my last posted question/issue. I have tried creating a Microsoft
HTML layout in RH4 Word; it begins to compile and, somewhere in the
process, just freezes. I've tried importing the .hlp file into RH
HTML; same result. I've tried creating a new HTML project with the
.hlp file; same result. If I could import the file, it'd be great.
Otherwise, I'll need to recreate the entire project, which brings
me to converting the .shg files. Any ideas?

Does LightRoom support Raw images and HDR

I am interested in creating a number of HDR prints and am looking for the right software to get.

HDR photos must be created by some other application (not Lightroom). Once created, Lightroom can edit the HDR and print it.

Is HTML's image mapping in OWA not supported?

We compose a mail inserted with a HTML page which contains a image devided into serveral parts by using <map> and <area> tages. People received mail can follow the hyperlinks set in the different part of the image to be directed to various
web pages.
It is fine to display this HTML page with mail clients such as Outlook.
But in OWA (Exchange 2010), the hyperlinks inside the image are missing, only an image left.
So I am wondering if some HTML tags such as image mapping tag <map> and <area> are not supported in OWA.
Or do I need to do some configurations to make this effect?
Can someone give me some advices?
Thanks in advance!

Hi,
What's your Outlook version?
Based on my search, Outlook 2003 and Outlook 2007 can support HTML image mapping. Even Outlook 2010 don't support image mapping.
Someone encountered the same issue in Outlook 2010 as you got in OWA. It seems that OWA don't support HTML image mapping as well. You can look at the following thread.
https://social.technet.microsoft.com/Forums/office/en-US/aac24b10-40ab-4510-bd5a-17ab351a4711/how-do-i-use-an-image-map-in-outlook-2010?forum=outlook
Best regards,
Belinda Ma
TechNet Community Support

Turning HTML image into PNG

Hi,
I don't think this will work but before I give up entirely I decided that I should ask people who would know more than me. I created a HTML image through work's photoshop cs4 to be uploaded onto our Linkedin pages' hero image. However, LinkedIn does not support html images but it does support png. Is there a way that I can convert the html file into png and still make it clickable?
I hope this makes sense
Thanks,
Nash

Helios,
The way I (mis)understand it, you may:
1) Create a rounded rectangle/square, or a rectangle/square and apply the rounding as an effect, that has the desired outer shape, placed on top of the image;
2) Select both and Object>Clipping Mask>Make.

Image cannot be rendered because Aperture does not support image format

Dear all,
I have installed apple Aperture 3.03 and the complete Nick software plug-in selection:
• Dfine 2.0 for Aperture
• Color Efex Pro 3.0 Complete for Aperture
• Silver Efex Pro for Aperture
• Sharpener Pro 3.0 for Aperture
• Viveza 2 for Aperture
History
Until a few days ago the system was running ok / no notable issues on performance. / all pug in seem to run good / no issues. Also
• I Run OSX10.4/ Aperture 3.03 ( 32Bit mode)
• My library contains just over 10000 images / approximately 140GB
• I have recently updated the OSX software update including the security update 2010-005
• as well as the Snow leopard graphic update 1.0
• As far as I am aware all updates where automatically recommended by OSX Software update ( no manual intervention).
• As far as I remember after update the system still was running ok but honestly I can not tell you how many times the Nick Plug in started out of Aperture.
After all, Several times I continued using the system / still no noticeable problem until the following was happening:
Problem:
After creating with "PT gui" a panoramic image File type: "TIF" Pixel size: 5112 × 2556 (13,1 MP) I imputed this file in to Aperture (drag and drop). During the attempt to eddied this file with "Nick Define 2.0" the system was hamming up No response for several minutes from Dfine 2.0 / Aperture" At the end I had to "force quit" the applications.
After the consequential reopening of Aperture I tried again to eddied images with any Nick software Plug-In but each time Aperture prepares any image previously stored in my Library ti open the Pug in the following Error message appears:
*"This image cannot be rendered for editing because Aperture does not support the image format"*
Currently non of my previously in the library safed images can be opened in a Nick software Plug-In this applies to all file types I have tied " Raw, tif, jpg"
• I am still able to eddied normally with Aperture ( so far I do not find any other issue)
• A newly imported Raw image after being taken with my EOS 5D can be edited in the completed Nick software Plug-In selection ( so far I do not find any other issue)
The following actions have been taken to overcome the issue (all not successful):
• I restored my Library out of my back Up ( to previous time of event ( no Time machine back up)
• Uninstallation of all Nick software Plug-In selection
• Uninstallation Aperture Reinstallation Aperture / Nick software Plug-In selection
• Repairing the library ( all three possibilities)
• installation of latest EOS utilitys
Questions
• Can you support me to overcome this issue?
• Have you heard similar issues of Nick user Running the Aperture plug-ins?
For me it is really strange that even after replacing the the library in my normally not connect back up the problem still exists (this should be not affected by the event as the back up was not done any more) / new imported images are editable with the Plug-In.
I would be happy if you could support me in this issue.
Best regards,
Matthias
PS: I have reported this issue to Apple (via Aperture feedback) as well as contacted the Nick software support and currently waiting for feedback.
Harware:
Modellname: MacBook Pro
Modell-Identifizierung: MacBookPro5,1
Prozessortyp: Intel Core 2 Duo
Prozessorgeschwindigkeit: 2,66 GHz
Anzahl der Prozessoren: 1
Gesamtzahl der Kerne: 2
L2-Cache: 6 MB
Speicher: 4 GB
Busgeschwindigkeit: 1,07 GHz
Boot-ROM-Version: MBP51.007E.B05
SMC-Version (System): 1.41f2

Dear Ma-Le / All
I have just had the same problem
I use
• Aperture 3.03 with a iMac 2.8 Intel Core 2 Duo with all files on external hard disks (mac extended fomat as apple suggests) with referenced masters.
• Camera Nikon D300, with probably 75,000+ images on 2 hard drives
• Photoshop CS2 with PhotoTools 2.5 plugin
This has been working perfectly until yesterday when the system froze when I was using PhotoTools 2.5 with Photoshop CS2 - as a result of which I resorted to a force quit.
Since then on most of my files it has not been possible to use an external editor.
A message appears saying: *Editing Error - This image cannot be rendered for editing because Aperture does not support image format*.
The problem seems to apply to the attempted use of any external editor (including Noise Ninja)
The following have each been tried, all unsuccessfully:
- Using each of Aperture's library 3 first aid options
- Rebuilding directory using Diskwarrior
- Checking for virus using Virus Barrier X4
- Defragmenting library hard disk using TechTool pro
- Changing permissions settings
- Using Disk Utility first aid to repair permissions and checking main disk
- Removing some plist elements when open 'show package contents' of library
- Setting up a(n almost clean) new system, with newly loaded version of Aperture, with a new library from a vault saved prior to the crash when the problem first occured
Several things seem to me to be totally bizarre:
1 - The problem is the same on the other library hard disk which was not in use at the time
2 - The problem still occurs when a back up vault saved prior to this problem is loaded - using a new hard disk with a new system and a newly reloaded and upgraded Aperture software
3- The problem seems inconsistent. It appears to affect some photos but not all. Even from the same shoot, some photos can be edited using an external editor, whilst others cannot (but as far as i can tell most of the photos in a particular album seem to be consistently affected)
4- The only way around it seems to be if I import a new (copy image) from the original master. Then everything works ok, and I can successfully edit that copy image in photoshop / phototools plug-in.
I am beginning to wonder whether what has been corrupted is Aperture's ability to make copies from the master file which it then uses with the external editor (I have no real idea whether this is correct)
Does anyone have any ideas or solutions - or has anyone else been suffering a similar problem?
Eric
PS: As a professional photographer this problem is a really serious issue for me - and I really don't really want to go to Lightroom or Capture One

Exporting image maps, no option to save HTML

Hi All,
I'm trying to export an image map from Illustrator CS6. However I can't get it to save the HTML.
I've setup my hotspots etc. However when I do "Save for Web", there is no option to save "Images & HTML". It only gives me the option of "Image Only".
The only way I've been able to get the HTML is to click on "Preview" from the "Save for Web" screen, and then copy and paste the image map code from there.
I've also tested it with slices, and same thing. There just seems to be no way to get it to generate a HTML file.
Am I missing something? Is there some other way I'm supposed to get it to create the HTML?
Thanks,
Eugene

That's weird that they would simply remove the output option, but still allow URL's to be linked to an object.
Anyway thanks for the response. I've just done some hunting around in Fireworks and figured out how to link hotspots to the Illustrator objects, and output the HTML image map. Problem sorted

This image cannot be rendered for editing because Aperture does not support

Editing Error: This image cannot be rendered for editing because Aperture does not support the image format.
I have been having this issue when trying to open photos in CS4. It only seems to be affecting images from the last year or so, although I'm using the same cameras (Canon 7D, 5D, and S90) as before. My library is large, going back to year 2000, and all the older images seem to work fine, but most all of the recent files display this error when trying to open them is CS4. I've tried the methods described in other threads and on the support website, namely starting aperture while holding option and command, pulling up the options to rebuild the library in various ways. I've done all three options, the last two twice, with no change. This is very frustrating to not be able to use the program in the way I had planned... Any ideas? I'm wondering if my library is simply too large- although I'm not sure if breaking the library into smaller chunks is the best way to go. I prefer having all my photos together. I have found that iMovie fails to operate properly when events get too large. Is this a similar problem?

Again, thanks for the input. As for the first suggestion, when I import without renaming they all work, but as of late, all appear to work no problem. It seems like it was a block of time from roughly October 2009 through November 2010 where most all the files imported during this date demonstrate the problem. As for the second suggestion, I've tried both 8 and 16 bit TIFF and PSD file types selected in the editor preferences, with no luck.
My next move has been to relocate the offending files out of their current location to another location (they are referenced, not managed). In doing this, I encountered what seems to be a file access or privelege error message, although about 20% of the files were moved, and in doing so, it seems to have solved the problem for those. But I don't have a good way of isolating the involved images outside of Aperture, and I don't want to move them with Finder anyways since that would ruin the referencing.
This bug is getting so complicated I'm ready to throw my hands in the air and just go back to Lightroom. Aperture has so much potential, especially in regards to integration with ipods, iPads, other Macs, etc. but in the 4 months I've been using it, I have spent WAY more time addressing buggy issues like this one than the amount of time supposedly saved using Aperture instead of Lightroom.

Does WDA support HTML Image Maps?

Similar Messages

Maybe you are looking for