Doing the same task for different data.. Do I need Queues? How to use them if yes?

Hello all,
I have created a VI which is getting data from some FTP server and then after comparing with the HDD specified folder copy the missing data from the FTP ... Description is also in the VI. There are few things I need to ask.
1) The email sending VI gives error 1172..What could be the reason .. is it firewall.. or is there any mistake in the code?
2) As you people are experts so I really like any suggestion to improve the VI..
3) The most important .. Currently this VI can only perform the whole task for one FTP folder. Actually my task is I need to check for 4 different FTP folder on different servers..its not 4 different folder in one FTP .. its 4 different FTP.Now my question is how I can do this: First it compare and copy from FTP1.Then FTP2... and so on.. How can I change the data for the cluster for different FTPs? Do I need to use queues? If yes how because I don't have any experience with queues.
I will really appreciate is someone can either provide me the relevant example or can give me some idea.
The main VI is the 'TASK START'.VI please find the attached files.
Thanks
Regards,
Naqqash
Naqqash
Attachments:
Project.zip ‏151 KB

Hi Peter,
Thank you very much for your reply. I have understood your idea but there are few problems.
Please see the attached "Final test.vi".. actually my top level vi should be like this.. due to this reason I need to develop the cluster like one with name "Settings" as shown in Enum FTP events.vi.. In this cluster all the data types are not constants (but can be set as constants) and further all of them are not of same type so whenever I try to create as you created I have got error, wire broken..so what do you think i should do.. In this cluster there are different types of data .. string, path, numeric, array and a cluster with name file properties also... can't figure out what to do..I know things are little scattered and wiered but due to lack of experience, I guess, I am now a little bit confused for this matter. I
hope guys here in the forum will help me as you guys always did.
Naqqash
Attachments:
Final test.vi ‏11 KB
Enum FTP Events.vi ‏14 KB

Similar Messages

PPOME - Can't insert the SAME task for different organization unit

Hi all,
I have a doubt; in SAP 46C, it seems that is impossible to insert in PPOME, Detailed window, Tasks tab the same task for different organization unit. The only way to do this is in PP01 - General management, where you can explicitely create a [B-007] relations with the same "T" Object. Now, it is a little bit difficult for a user to switch from PPOME ad PP01 when defining new organizational structure.
The question: is there any way to insert the <b>SAME</b> task directly in PPOME, overwriting the standard behaviour of the system that by default create a new task for each new insertion?
Thanks all
Paolo

Hi Naveen
thank you for your prompt reply.
The issue that I want to solve is that some organization unit (not all) must be flagged for an external export to another system, depending on some characteristic of each org unit. I didn't find a similar attribute on standard field, so I thought to insert a common task to all the org units to export, so that this relation can serve as the missing attribute on org unit definition.
PP01 let me insert a task (type T, and not TS) on an org unit directly, so I want to know if I'm going to break some standard behaviour of SAP if I insert a task on OU.
Thank you
Paolo

How to assign the same GTIN for different material?

Hi,
I've managed to install an internal number assignment for the GTIN / EAN in material master which works fine.
Now we need to assign the same GTIN to different material numbers.
Since the defined number range is marked as internal I cannot use this number range as the external number range in spro -> Define Attributes of EANs/UPCs (number categories/EAN categories):
I cannot make an external number range with the same data as the internal one, since number ranges must not overlap.
So, here is the question again:
How can I achieve that 1. the GTIN is generated and 2. a GTIN, which is already assigned to another material, can be entered manually in the GTIN field?
Any advice is appreciated,
thanks,
Marco.

1. the GTIN is generated
This should be "external" number range only.
2. a GTIN, which is already assigned to another material, can be entered manually in the GTIN field?
We can enter manually or thru' upload during master data creation provided number range is "external"(refer point no.1 above)
Unable to understand that why you need same GTIN in two different articles?
Request to understand the business process once again as this leads to confusion reg. inventory, PDC and PoS dumping.

Can you change rollover text in the same slice for different triggers?

Hi, I haven't used Fireworks since version 3, which was about 6 years ago, when I dabbled in web development. My past has come back to haunt me, and I need to make a fairly simple website pretty quickly for my boss. I've got myself CS4, and now that I've figured out that you can't use buttons for disjoint rollovers, I'm starting to make progress...
What I want to achieve, is that there are 6 'buttons' on my page, which when you rollover them will display text in a box to the side. I would use separate boxes for each button, but there isn't enough space on the page, as there is quite a lot of text, so I would like to use a box in the same place to display any of the 6 texts, depending on which button is rolled over. Can this be done?
I probably haven't quite got my head round layers, and this may be very simple, but could someone please point me in the right direction, even if it is a link to the right bit on product help?
Because the button disjoint rollover doesn't work, I have created 6 slices for the triggers. I tried hotspots first, but couldn't use them as I also want a rollover live filter effect on the trigger.

Yes, you can trigger different slice contents on rollover from multiple other slices.
It's easier to show than describe, so here is a sample file that does what I think you're looking for:
(1) six buttons
(2) each button has unique text
(3) each button has a rollover state
(4) unique text is displayed in the same place for each button on rollover
Hope this helps!
Dave
Right-click and save the image below - it's a Fireworks source file:

I have an iMac OS X Version 10.5.8 but I also have a MacBookPro 10.7.5 version, why software updates are not the same? For example, when I want to know how much memory can not store in the same way in either computer.

I have an iMac OS X Version 10.5.8 but I also have a MacBookPro 10.7.5 version, why software updates are not the same? For example, the way to see how much memory I have in my iMac is diferent than MacBookPro. And where I can see the memory of the disc I've got in my iMac? Than you very much.

If you want everything the same on both computers you need to be running the same OS X version. You can't because your iMac is a PPC machine, not Intel.
But to see information about your hard drive is the same for both. Simply select the drive icon on the Desktop. Press COMMAND-I to open the Get Info window. Disk information is in the upper panel.

Iphoto showing the same picture for all my uploaded pictures after update, how do I get my old ones back so I can upload them to websites?

After updating the new iPhoto software in the middle of December, I haven't been able to view all of my pictures that had been on my computer prior to the new software update, It shows the same photo for every single picture, how do I convert it back or reboot it?
THANKS!!

make a temporary backup of the library and launch iPhoto with the Command+Option keys depressed to rebuild the library. Select the options for rebuilding the thumbnails .
OT

2 files running at the same time for adquiring data from different ways

I want to adquire from a serial port( using VISA) and from a DAQ at the same time. I want data form both devices at the same time.
My program is a while loop reading continuously from both devices until I stop the while loop with a control.
I have noticed that I don't receive right data when I read from both devices in the same program.
So, I have tried to run 2 different programs, one for Visa adquisition and another for DAQ adquisition, at the same time. At this way i receive data ok.
So, i want to know how can i do execute 2 different .vi files at the same time and how can i get data from the another one.
Please, help me!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!. I don't know what to do!
Luz

Luz,
you can insert two seperate while loops in parallel into one VI. Please
take a look into the template browser and the example finder of LV for
some examples. You can find the template browser by selecting "new"
(not new vi!) in the file-menu. The example finder is located in the
help-menu.
hope this helps,
Norbert B.
NI Germany
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.

Reload the same viewController with different data?

Hi -
I have a view which can have either a list of, say, fruit, or fruit vendors. If it a list of vendors, clicking a vendor loads a view where it lists the fruit they sell. If it's a list of fruit, clicking a fruit loads a view where it lists all the vendors of that fruit.
The same view controller controls that page no matter which set of data is displayed.
What I'd like to do is animate the transition when that click takes place just like I was going to a different view controller.
I tried this:
[[self navigationController] pushViewController:self animated:YES];
But it's not doing anything - at all.
Is there a way to do this short of rewriting it to have two separate view controllers for the two sets of data?
(Sorry, posted this in the wrong forum and I don't see a way to delete it here...)
Message was edited by: Sue Boettcher1

Well, I spoke too soon.
I can get the page to load and it animates right, but I think I haven't got it hooked up right in the nib "referencing outlet" stuff correctly.
I can't get my head around it - I have to create a new instance of the view INSIDE a method for the view itself. I can see where the other (original) instance of the view is hooked up in the nib but I can't figure out how to hook up the new second instance.
I'm probably not explaining this very well but I can't post a screenshot...

Why does the same clip play differently each time I play it?

Playing a flash animation clip in Adobe Media Player plays differently each time I play it. I'm looking at animation we made that has a left to right move. Sometimes it plays smoothly, other times it stutters, but the stutters happen at different points each time I play it, and the amount of stuttering changes each time I play it. I'm trying to decide if the file is acceptable to post on the web, so I'm playing the same 34 second file from my hard drive, each time in succession, yet each play is different. Boy, if you can help me with this I would sure appreciate it, as it is driving me crazy. (The same thing happens on other flash players). And no, the file isn't haunted...

Hello and thank you for trying to help me out. When I click on the itunes icon on my desktop, it does the preparing to install.... on my laptop, when I click on the icon, itunes opens automatically. I really can't figure out why one does this and the other does not.
Apparently, I was not having trouble connecting to the itunes store like I thought. Many other people complain of the same problem I had---the connecting to the itunes store progress bar goes halfway, stops, and then all I see is a blank white page that says itunes store. Well, after playing around, and clicking on VIEW and SHOW sidebar browser, I was able to see the itunes store! Yay!! It was so simple, it was unreal that so many people are having the same problem I thought I was having, connecting, when all that was was a VIEW issue.
As far as my desktop doing the preparing to install, I don't get it. I have uninstalled itunes9 and redownloaded it, reinstalled it. Same problem. Preparing to install. No matter what itunes icon I click on, or even if I click ont he application itself from it's folder. Any ideas?
So just forget about my connection problem---it was not a problem after all. Yet one pc does preparing to install when the itunes icon is clicked on, and the other pc does not. Both are running windows vista home premium. One is a desktop, one a laptop. I can't figure it out.

Credit limits for the same Customer for different countries.

Hi SAP Gurus,
A customer belongs to 2 different countries, the credit limits are maintained in FD32 for one country.
But basing on the "country" the credit limits should change for the same customer.
So how we need to handle FD32 in this scenario. Is there any option to maintain credit limits basing on the "Country"?
Thanks and Regards
Sunil
Edited by: Sunil.kds on May 27, 2011 9:37 AM

Hi ,
sales area wise , you can differentiate the credit limit . In this case , you can have one more credit control area and assign it to new sales area. it the same customer comes under diff country , extend the customer to the new sales area . By doing so, you can have 2 credit limits for the same customer.
With Regards
S.Siva

Dynamic domain uses the same ViewObject for different parameters.

Hi all.
My version：
JDeveloper 10.1.3.2
JHeadstart 10.1.3.1
When I in the same group different fields use DynamicDomain,as below：
DynamicDomain with ViewObject(ex：CodeView and parameters set :1),Query Bind Parameters set "a001".
Then create another DynamicDomain with the same ViewObject, but Query Bind Parameters set "a002".
Result, all value of the field is Parameters set 'a002'.
can give me any help?
Thanks.
Joy

Joy,
The queried data collection is held at the level of the View Object usage. So, while you can reuse the same ViewObject, you need to create two separate View Object usages in the application module, one for each domain.
Steven Davelaar,
JHeadstart Team.

How can I use the same session for different components acroos application ?

I am trying to include the components(chat, filesharing, whitboard) in different parts of my application. User should be able to access any of the component. We would like to have a single "ConnectSessionContainer" so that we don't see same user creating a seperate session for each component.
Is there a better way of dealing with this other than declaring the "ConnectSessionContainer" in the main application ? Is there a way to check if we have a "ConnectSessionContainer" session already established ? Please help . Thanks.

Thanks for the response. Let me explain what I am trying to do..
I am trying to create components at different places(screens) of the flex application (not in the same .mxml file).
Each time I create a component, I am using a "AdobeHSAuthenticator" and "ConnectSessionContainer" which is resulting a new participant in the room.
For example
screen1.mxml -
<mx:Panel>
<rtc:AdobeHSAuthenticator id="auth" authenticationSuccess="onAuthSuccess(event);" authenticationFailure="onAuthFailure(event);" />
<rtc:ConnectSessionContainer id="mySession" >
        <rtc:Roster id="myRoster" width="100%" height="100%" />
        <rtc:Chat id="mychat" width="100%" height="100%" />
</rtc:ConnectSessionContainer>
</mx:Panel>
screen2.mxml (in the same application) -
<mx:Panel>
<rtc:AdobeHSAuthenticator id="auth" authenticationSuccess="onAuthSuccess(event);" authenticationFailure="onAuthFailure(event);" />
<rtc:ConnectSessionContainer id="mySession" >
        <rtc:SharedWhiteBoard id="wb" width="100%" height="100%" />
</rtc:ConnectSessionContainer>
</mx:Panel>
Here, I open a screen1 and authenticate as UserA and when I try to open screen2 flex is considering me as another user though I am in the same application.
1) How can I use different components which are in different flex files as a same User ?
2) Should I place my <rtc:AdobeHSAuthenticator> and <rtc:ConnectSessionContainer> in the main application which calls the screen.mxml?
3) What is the best way to do it ?
Thanks for your time !

Applying different template to the same item for different organizations

Hi I'm having an issue with an item load.
We are trying to load a list of items using the item import.
3 orgs
1: mas
2: first
3: second
say in the new list that we are importing there is an item "100A" (mtl_system_items_b.segment1)
This item already exists in the mtl_system_items_b as a master item (ie assigned to the master org) it has template "STOCK ITEM"
and is also attached to the first org
I want to create the same item as a nonstock for the Second org
Can this be done?
When i tried to do the import it failed giving me a INV_IOI_MASTER_CHILD_1A error (Master - Child Conflict in one of these Attributes: Default Buyer(BUYER_ID), Accounting Rule(ACCOUNTING_RULE_ID), Invoicing Rule(INVOICING_RULE_ID), Purchased(PURCHASING_ITEM_FLAG), Shippable(SHIPPABLE_ITEM_FLAG), Customer Ordered(CUSTOMER_ORDER_FLAG), Internal Ordered(INTERNAL_ORDER_FLAG), Inventory Item(INVENTORY_ITEM_FLAG))
Any ideas on how to do this?
Thanks
D

Hi Sandeep
Thanks a lot for the reply
In our MASter org setup, the Template "T1" is a STOCK_ITEM template and it has the stockable attribute set at the org level.
This item is also assigned to ORG1 as a T1 STOCK_ITEM.
So can we create the same item using "T2 which is a NON_STOCK Template in org2 ?
If yes then that means I just have to create a record in the MTL_SYSTEM_ITEMS_INTERFACE only for the child org2.My concern is I read somewhere that
the item import tries to match the attributes of the child org to the master org attribute(for attributes controlled at master org i think).
And since the attributes for a nonstock are different than those for a STOCK wouldn't that create a problem?
Thanks
D

Can 2 matrix windows be open at the same time, for different parts?

I played a midi part freely, and then overdubbed a second part on a different audio instrument "in unison" (there is a joke here, I know), but some of the note attacks were slightly off.
I wanted to open the matrix windows for both parts to align the notes. But I could open only one window at a time. Is there a way to open both matrix windows at the same time so you can look at the two parts side by side?
Thanks for any advice,
Jim

yes - but in order for it to work u should not enable the link button - the pink one in the upper left corder of the matrix...

Installing applications twice on the same computer for different OS

Hi. I currently have the latest version of Tiger installed on a G5 PowerMac. I'm planning to replace my boot drive w/ a larger drive and partition it, using one partition for Tiger and the 2nd partition for Leopard (10.5.8). As I understand it, applications must be installed on the same partition w/ the OS so I assume I will have to reinstall any applications that I am now using w/ Tiger onto the Leopard partition as well (if I would also like to be able to use them w/ Leopard). This will result in applications being installed twice on the same computer, one installation on the Tiger partition and a 2nd installation on the Leopard partition. Has anyone done this successfully w/ Adobe CS3 applications? I'm not sure if this question might be better suited for an Adobe forum but I was hoping someone here might be able to provide some helpful feedback. I would also like to know if there are any other issues that I should be aware of concerning installing the same application on two different partitions. Thanks for your consideration. (I would also like to be able to do this w/ FCP6.)
Jack

Hi Jack,
First finish 10.4 Install, then clone the 10.4.11 patition to the one you want to use for 10.5...
Get carbon copy cloner to make an exact copy of your old HD to the New one...
http://www.bombich.com/software/ccc.html
Or SuperDuper...
http://www.shirt-pocket.com/SuperDuper/
Or the most expensive one & my favorite, Tri-Backup...
http://www.tri-edre.com/english/tribackup.html
Then Install 10.5 on that partition... it went fine for me.

Doing the same task for different data.. Do I need Queues? How to use them if yes?

Similar Messages

Maybe you are looking for