Domain Mail Can't Be Reached on Port 110

OK I'm thinking something is wrong with the MX records here.
First, the domain is registered on anotherr server than where it is hosted.
The A NAME for @ and www is working fine -- with the IP address XXX.XXX.XX.XX because the site shows up just fine.
www A XXX.XXX.XX.XX
@ A XXX.XXX.XX.XX
But now, I cannot configure the email into the Mail.app using the exact same settings as all my other domain emails, because it can't find the POP server.
I have scrutinized and rechecked spellings and passwords over and over. (I'm using out going from Comcast like all the others as well, all working)
I am thinking this is an MX record problem on his end.
Here is what he entered for the MX "user specified" mail server from the screen shots he sends me:
MX mail.mydomain.org
Hostname: @
Record Type: MX
Address: mail.mydomain.org
Pref: 0
When I look up in the DNS stats online, it says there is no A NAME for the mail server.
What does that mean????
Where would he find this?
The POP server does not respond.. that seems to be the only problem when configuring email in Mail.app
I don't usually have to mess with MX records, even in the rare case when the registrar is different from the host.. it just seems to set up automatically.
Not so with this...

You cannot call yourself on FaceTime. One of the device needs a different Apple ID or e-mail address.

Similar Messages

I cannot send an e-mail for my 3GS iPhone using port 110

I cannot send an e-mail for my 3GS iPhone using port 110; how do I find the right port? I have always used this port but now it does not work. I can send e-mails from my iPad using this port.

The port is determined by your Email Service Provider. So first off, who is your email provider?
Port 110 is not a standard port for sending. 25, 465 and 587 are the standard SMTP ports (sending) and 110, 143 and 995 are the standard POP/IMAP ports (receiving).

Problem: Cannot send mail unless Password is transmitted insecurely & Port is set to 587.. Can receive mail but can't send..

Problem: Cannot send mail unless Password is transmitted insecurely & Port is set to 587.. Can receive mail but can't send Code 501..
Need help with T-bird.. My OS is Win XP-64..Have been using Mozilla for about 10 years with little or no problems.. This happened when I upgraded to 3.17.. Spent hours on T-Bird diagnostics web site.. Called Comcast & talked to a net tech.. he ran some tests on his end & had me log into my Comcast e-mail account & all worked well,, so he concluded the problem was in T-Bird.. He had me change my port to 587 & disable connection security & authentication to none & I was able to send mail.. That was all he could do.. Comcast was working.. the problem is in T-Bird.. Can any one help with this problem.. I don't want to send mail with my password transmitted insecurely..
Thanks
Richard

It was not intended to be "snide". You said two separate things that at face value would be out of the ordinary.
I considered if it might be a typo for 31.7. Since 31.5 is the current formal release, I would have to thank you for volunteering to test a pre-release beta version. If it was truly 3.1.7 then it would appear that you have chosen, or have become stuck with a somewhat ancient version. In either case it's harder to reach out to you with any meaningful comments or advice. However I do watch various other sites and newsgroups and I don't see a clamour of distressed users, so it seems fair to suppose that this feature isn't actually broken in 31.7.
And you said XP 64. XP is obsolete and no longer supported and if there is a 64-bit version, then again you have set yourself apart from the mainstream.
I had a look at the comcast site and found some puzzling recommendations. Some users come here asking how to set up a secured connection in Thunderbird when it isn't offered by the server. Comcast are different, in that they mention the ports 143 and 587, and also 993 and 465. So far so good, in that security is actually on offer, but they also suggest that you enable SSL, regardless of which port is being used. It would be unusual and unconventional to offer TLS or SSL on ports 143 and 587. STARTTLS would be more credible on these ports.
Have you tried IMAP on 993 and SMTP on 465? SMTP on 587 with SSL, or TLS, is not impossible, but is improbable.

I can use Mail at home, no problem. But when I travel, I can receive mail but not send it. I get a "server can't be reached" message. Yet when I send a photo using iPhoto, it gets sent. Help!!

I can use Mail at home, no problem. But when I travel, I can receive mail but not send it. I get a "server can't be reached" message. Yet when I send a photo using iPhoto, it gets sent. Help!!

To diagnose problems with Thunderbird, try the following:
*Restart the operating system in '''[http://en.wikipedia.org/wiki/Safe_mode safe mode with Networking]'''. This loads only the very basics needed to start your computer while enabling an Internet connection. Click on your operating system for instructions on how to start in safe mode: [http://windows.microsoft.com/en-us/windows-8/windows-startup-settings-including-safe-mode Windows 8], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7 Windows 7], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-vista Windows Vista], [http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx?mfr=true" Windows XP], [http://support.apple.com/kb/ht1564 OSX]
; If safe mode for the operating system fixes the issue, there's other software in your computer that's causing problems. Possibilities include but not limited to: AV scanning, virus/malware, background downloads such as program updates.

I can't use iCal invitation with personal domain-mail

Hi,
I use iCal on iCloud with my personal domain mail [email protected]
When I invite another user that have an email address with the same domain like [email protected], the email invitation doesn't arrive!
Why??
I try the same thing with google calendar, and the invitation arrive correctly...

You have transported all your old copies of those applications onto your Mavericks system. You can't do that nor do you have to. Please do a proper reinstall:
Install or Reinstall Mavericks, Mountain Lion, or Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
OS X Mavericks- Erase and reinstall OS X
OS X Mountain Lion- Erase and reinstall OS X
OS X Lion- Erase and reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless.

The server network address can not be reached or does not exist

Hi all
    When i am trying to configure Mirroring .i am getting the below error.
The server network address "TCP://RDEEPA:5022" can not be reached or does not exist. Check the network address name and reissue the command. (Microsoft SQL Server, Error: 1418)
. TCP/IP and Name pipe connection is enabled in both principle and mirror server configuration.
I post the complete error message below ,which is in red
TITLE: Database Properties
An error occurred while starting mirroring.
ADDITIONAL INFORMATION:
Alter failed for Database 'success'. (Microsoft.SqlServer.Smo)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.1399.00&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Alter+Database&LinkId=20476
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
The server network address "TCP://RDEEPA:5022" can not be reached or does not exist. Check the network address name and reissue the command. (Microsoft SQL Server, Error: 1418)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=09.00.1399&EvtSrc=MSSQLServer&EvtID=1418&LinkId=20476
BUTTONS:
OK

Hi,
I have the same problem. However beginning over and over again and using other ports did not solve this unfortunately.
Here is the SQL I used to setup the mirroring.
* Principal DB
CREATE ENDPOINT [MirroringEndpoint]
    AUTHORIZATION [DOMAIN\administrator]
    STATE=STARTED
    AS TCP (LISTENER_PORT = 5022, LISTENER_IP = ALL)
    FOR DATA_MIRRORING (ROLE = PARTNER, AUTHENTICATION = WINDOWS NEGOTIATE
, ENCRYPTION = REQUIRED ALGORITHM RC4)
BACKUP DATABASE TEST
    TO DISK = 'C:\full-backup.bak'
    WITH FORMAT
BACKUP LOG TEST
    TO DISK = 'C:\log.bak'
ALTER DATABASE TEST SET PARTNER ='tcp://sql2.domain.local:5022';
* Mirroring DB
CREATE ENDPOINT [MirroringEndpoint]
    AUTHORIZATION [DOMAIN\administrator]
    STATE=STARTED
    AS TCP (LISTENER_PORT = 5022, LISTENER_IP = ALL)
    FOR DATA_MIRRORING (ROLE = PARTNER, AUTHENTICATION = WINDOWS NEGOTIATE
, ENCRYPTION = REQUIRED ALGORITHM RC4)
RESTORE DATABASE TEST
    FROM DISK = 'C:\full-backup.bak'
    WITH NORECOVERY
RESTORE LOG TEST
    FROM DISK = 'C:\log.bak'
    WITH FILE=1, NORECOVERY
ALTER DATABASE TEST SET PARTNER ='tcp://sql1.domain.local:5022';
The last statement on the principal server gives me the following error :
Msg 1418, Level 16, State 1, Line 1
The server network address "tcp://sql2.domain.local:5022" can not be reached or does not exist. Check the network address name and that the ports for the local and remote endpoints are operational.
From the principal server I'm able to ping the mirror server and can establish a telnet connection. When the statement gets executed even netstat gives me the following output :
TCP    0.0.0.0:5022           0.0.0.0:0              LISTENING       1244 [sqlservr.exe]
TCP    10.1.1.140:5022       10.1.1.110:1223       TIME_WAIT       0
TCP    10.1.1.140:5022       10.1.1.110:1226       TIME_WAIT       0
TCP    10.1.1.140:5022       10.1.1.110:1216       TIME_WAIT       0
TCP    10.1.1.140:5022       10.1.1.110:1218       TIME_WAIT       0
TCP    10.1.1.140:5022       10.1.1.110:1225       TIME_WAIT       0
TCP    10.1.1.140:5022       10.1.1.110:1222       TIME_WAIT       0
TCP    10.1.1.140:5022       10.1.1.110:1221       TIME_WAIT       0
TCP    10.1.1.140:5022       10.1.1.110:1224       TIME_WAIT       0
TCP    10.1.1.140:5022       10.1.1.110:1219       TIME_WAIT       0
TCP    10.1.1.140:5022       10.1.1.110:1220       TIME_WAIT       0
Is it normal so many ports get opened?
Any help would be greatly appreciated (as this drives me crazy :-( )
Found the problem eventually. The mirroring ran as the NT_AUTORITY user instead of DOMAIN\administrator.

Mac mail service isnt listening on default ports at all other than SMTP

Mac mail service isnt listening on default ports at all other than SMTP.
I can port scan locally and here is what's listening
Port Scan has started…
Port Scanning host: <IPADDRESS>
     Open TCP Port:     25             smtp
     Open TCP Port:     53             domain
     Open TCP Port:     80             http
     Open TCP Port:     88             kerberos
     Open TCP Port:     106            3com-tsmux
     Open TCP Port:     311            asip-webadmin
     Open TCP Port:     389            ldap
     Open TCP Port:     443            https
     Open TCP Port:     464            kpasswd
     Open TCP Port:     587            submission
     Open TCP Port:     625            dec_dlm
     Open TCP Port:     749            kerberos-adm
Port Scan has completed…
Mail service is on.

first place to start is always /var/log/system.log
stop/start mail service while watching that log.
You will probably catch some dovecot/imap lines that will yield clues.
Post results.

Emails will not send - Mail can't connect to the a...

After having no issues with sending emails for years suddenly I am continually getting the following meassge when trying to send emails. Eventually after putting this password in up to twenty times the email will send.
The message is:
Mail can't connect to the account "mail.btinternet.com:[email protected]" Enter the password for user "[email protected]"
This is happening on all of our computers: Macbook Pro, Macbook Air and Imac and started about 2 weeks ago. It occurs for every sent email.
Any ideas on how to stop this?

MatM wrote:
I have logged into Bt.com and there is no issues there. Sent an email from there an it was received.
Also spent 2 long hours sharing a screen with someone from BT who obviously didn't know what they were doing as they did not even look in the MAIL preferences.
This is the error message we receive:
The server “mail.btinternet.com” cannot be contacted on the default ports.
Select a different outgoing mail server from the list below or click Try Later to leave the message in your Outbox until it can be sent.
Any reason why there server can't be reached. We have been using these settings for years without issue?
Thanks
Mat
Hi.
What port is set in your smtp account ?
It could be that your whole account has now been transferred to Critical Path - you can tell this from logging into webmail via bt.com - if it doesn't say BT Yahoo in the title area, you've been transferred and should alter the settings.
This will, of course, probably cause issues for 100s of 1000s of people. An email should have been received titled "The new BT Mail is coming your way", and gives some details including a link of what to do to various devices and mail clients :-
http://www.bt.com/newemail
with particular details here :-
http://bt.custhelp.com/app/answers/detail/a_id/47531
http://www.andyweb.co.uk/shortcuts
http://www.andyweb.co.uk/pictures

Synchronization of domain mail in windows 8.1 pc

In windows 8.1 how to Synchronize domain mail id (for example [email protected],[email protected]) in mail app present in store.

Hi,
Did you mean to add the domain account under Computer management as below?
If so, the domain account should have the permission to access the files of which Admin has full control.
Would you please let me know what files your domain account fail to access? Please help to list some.
Also, I suggest you use the Process Monitor to capture the system event when you repro this issue.
Process Monitor v3.05
http://technet.microsoft.com/en-us/sysinternals/bb896645.aspx
You can also try to use this article to troubleshoot this issue.
Solving Access Denied Errors Using Process Monitor
http://improve.dk/solving-access-denied-errors-using-process-monitor/
If there is any difficulties, please upload the saved pml file from this tool here for our research.
Kate Li
TechNet Community Support

Cannot receive mail - Mac Mini mail - can send, not receive

Cannot receive mail - Using Mac Mail - Can connect with internet - Can send, but not receive
== This happened ==
Every time Firefox opened
== Noon on June 26, 2010 ==
== User Agent ==
Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10_5_8; en-us) AppleWebKit/533.16 (KHTML, like Gecko) Version/5.0 Safari/533.16

If you don't mind me asking, what domain is MacMail under?

Problem in receiving the internal domain mail through windowsmail, Outlook, Outlook Express

Hi,
Am not able to receive the internal domain mails in Windows mail,Outlook Express, Outlook. I can able to send and receive the mail for external domains. For Eg. My domain name is example.com & my email id is [email protected], i am sending a email to
one of my manager email id [email protected], the mail successfully sent there is no error while sending, in the [email protected] the mail is not receiving. If i send any mail to external domain eg. test.com ( [email protected] ) the mail sent
successfully and the mail also received from their end through the Outlook express, outlook or windows mail. I check with the mail service provider that was hosted by the web hosting vendor, they said there is a problem with microsoft. May I know whats the
problem and how can i resolve this issue...
Regards,
Rajesh P

This is what is coming in the mail:
Job Name
Released By
=
ZBCR_BACKGROUNDJOBMONITOR
BSHASTRY
ZBCR_BACKGROUNDJOBMONITOR
BSHASTRY
ZCANCEL_JOB
BSHASTRY
ZCANCEL_JOB
BSHASTRY
ZCANCEL_JOB =20=
BSHASTRY
ZCANCEL_JOB
BSHASTRY
ZCANCEL_JOB
BSHASTRY
ZCANCEL_JOB
BSHASTRY
ZCANCEL_JOB
BSHASTRY
=20=
ZCANCEL_JOB
BSHASTRY
ZCANCEL_JOB
BSHASTRY
The correct format which i am expecting is:
Job Name
Released By
ZBCR_BACKGROUNDJOBMONITOR
BSHASTRY
ZBCR_BACKGROUNDJOBMONITOR
BSHASTRY
ZCANCEL_JOB
BSHASTRY
ZCANCEL_JOB
BSHASTRY
ZCANCEL_JOB
BSHASTRY
ZCANCEL_JOB
BSHASTRY
ZCANCEL_JOB
BSHASTRY
ZCANCEL_JOB
BSHASTRY
ZCANCEL_JOB
BSHASTRY
ZCANCEL_JOB
BSHASTRY
ZCANCEL_JOB
BSHASTRY

Thunderbird works fine, Apple Mail can't send (and other problems)

I have both Thunderbird and Mail setup exactly alike. Thunderbird can send mail just fine, every time, from any location. Mail was able to send messages a few times but for the last few days refuses to send anything.
Here's the setup:
Four smtp servers
mail.bellsouth.net
mailer.louisiana.edu
smtp.coxmail.com
smtp.central.cox.net
each is setup with password SSL authentication. Each works just fine on any other computer and even on this one with Thunderbird. Apple Mail is the only problem. (and yes - ALL SETTINGS ARE EXACTLY CORRECT)
NO - port 25 is NOT the issue - it works fine with other software on this computer and others - it is ONLY Apple Mail which can't manage to connect to the servers.
I use an AirPort extreme and have reset it repeatedly. (I can usually connect to an smtp after doing so but only until Mail attempts to send) I have tried a direct ethernet connection as well. Same results.
Mail refuses to connect to any smtp server. (it connects to the POP servers just fine) Occasionally, if I retype in the smtp password, or even delete it and turn off SSL, it will connect for a short time. (until I try to send a message)
What's the deal?
I see others have similar problems, but all seem to be ISP related. In this case, I've controlled for everything I can think except Apple Mail.
A few other problems, maybe related or not:
Mail has NEVER saved any messages I have sent out in any type of 'sent' folder. Sometimes the folder appears, sometimes it doesn't, but it is always empty. And yes, the setting to 'delete messages in the sent folder' is set to NEVER. So they should all be there.
Additionally, the very FIRST note I created was saved in my Inbox as it should have been. NOT ONE single subsequent note has saved - I lost every one of them. (I also can't seem to find any means to manually save the note - how ridiculous)
Finally, though it isn't that important at the moment, when Mail can't manage to connect to an smtp server, it just sits there and tries to send forever. Sometimes it will tell me it failed and suggest another server, sometimes not. In all cases, there does not seem to be a "STOP" button or command to tell Mail to quit transmitting/receiving.
I'd really like to use this program since it integrates with iCal and Addressbook, but this is getting absurd.
Thanks for any help anyone can provide.

Who is your isp?
If it is Cox they say on their site that you have to use only their smtp server.
Other than the mailer server (of which I have no info), I question the ssl setting.
Cox specifically say to not use ssl when setting up the outgoing server.
Bellsouth do not appear to require authentication and do not use ssl either.
AT&T Help Center Online: How To: Set Up Your AT&T Email Account Using Apple Mail 2.1 on a Mac OS 10
http://help.bellsouth.net/bellsouth/asp/contentview.asp?isbrowse=true&sprt_cid=d 5442d40-acde-4d94-9192-0ae128b2ca78
"each is setup with password SSL authentication. Each works just fine on any other computer"
Are any of the other computers mac's?
You say that "it works fine with other software on this computer" - what is this other software that is using ssl and port 25 to connect to the smtp servers?
Port 25 is not used for ssl, use either 587 (standard) or in some cases 465 (non-standard).

"Mail can't verify the identity of" after 10.6.4 update.

So our Exchange 2003 server uses a wildcard certificate so we can protect multiple resources without buying 10 different SSL certs. It's been working perfectly so far, until I updated to 10.6.4. Now I get the following error. I've even deleted the account in Mail.app and re-added and it still won't take the wildcard SSL. The error is:
"Mail can't verify the identity of "mail.xxxxxxxxxxx.net" +(our domain)+ "An SSL error has occurred and a secure connection to the server cannot be made."

Great. I've done nothing else and it has resolved itself. I hate when that happens because I can't conclude what the final fix was. I can only guess that accepting the wildcard SSL fixed it since that was the last thing I did.
So, I can only conclude at this point that accepting the SSL and rebooting(?) fixed the issue.

Error message: Mail can't connect to the account "Yahoo"

Talked with Apple support and could not get this resolved. We first tried going to Mail Preferences and making sure everything on the accounts were correct. I do have two Yahoo email accounts on this computer. Next time I called we went to System Preferences - Mail, Contacts, & Calendar's and deleted each account. Then added them back. I'm still getting the error message.

Open Keychain Access in Utilities, use Keychain First Aid under the Keychain Menu item, then either check the Password under that item, change it, or delete it and start over.
You may have multiple entries. Delte them all.
Open Keychain Access in Utilities, enter the part after the @ sign in the search bar, hit enter
The Password rejection can confuse people since it's a catch all meaning...
This Password, Username, Authentication method... is not recognized on this Port to this Server, or a server end problem.
If using a browser to login via WebMail works it's not Name or Password, but one of the other ones.
The receiving email ports are:
IMAP is port 143
IMAP-SSL is port 993
POP is port 110
POP-SSL is port 995
Outgoing ports are...
SMTP and SMTP-SSL is on ports 25, 587 and 465. Port 587 has to be SSL, and port 465 is enforced TLS-wrapped and is generally used by Outlook users.

Mail can't send messages

I have AT&T Yahoo DSL and my imac mail can't send messages. It says the smpt server has timed out trying to send the message on port 25.

Open Connection Doctor in the Window menu
Double click on whatever is showing as red.
Check the following settings.
pop.att.yahoo.com
smtp.att.yahoo.com
Click Advanced to enter the SSL and port info.
Both incoming and outgoing mail use authentication
Use (SSL) and SMTP port 465.
Use (SSL) and change the POP3 port 995.
Confirm the above settings before clicking OK.
Then check connection doctor again.
There is an incoming mail server and an outgoing mail server for each account.
So for each account there should be 2 servers.
Count how many servers there are set up in connection doctor.

Domain Mail Can't Be Reached on Port 110

Similar Messages

Maybe you are looking for