"Domain Users" group in Active Directory does not belong to any Group Membership in LC

Active Directory user belonging to "Domain Users" group does not belong to any Group Membership in LC, why does it not belong to "Domain Users" group?
Any way to correct this issue, without changing group membership on AD side?
If Active Directory user is member of "Domain Admins" or "Users" then these show same group membership in LC.
Thanks.

If you want to use the Domain Users group for the purpose of representing all the users then you can use the "All principals in domain xxx" group which is created by UM.
Coming back to Domain Users group. For determining group membership in AD UM uses "member" attribute of the group object. "Domain Users" group is treated differently by AD. It is the default primary group for all the users and normally members of the primary group are not specified using the member attribute.So when we sync the data from AD "Domain Users" membership does not get completed.

Similar Messages

AD user with no home directory does not work correctly

Hey guys:
I just tried to login as a standard AD user and was able to login, but the finder is having issues. The Finder seems to reset itself and the dock would also reset, plus the top menu bar is not present, anyone else with this issue? Also I login as my account with admin rights and have no problem, I am thinking about trashing the finder prefs and dock prefs and see what happens then, will post back if I find anything.
John

We're suddenly getting the same issue here.
A MacBook Pro (OSX Lion) installed a few months ago has no issue when setting up new users.
The MacBook Pro (OSX Mountain Lion 10.8.2) which arrived this week is a different matter altogether!
Once it joined the domain every attempt to log in as a network user has failed. The following ticked options work on our Lion machines:-
Create mobile account at login
Require confirmation before creating a mobile account
Use UNC path from Active Directory to derive network home location
Default user shell: /bin/bash
However, the Mountain Lion machine is having none of it. Network users get no finder bar across the top, the Finder icon will bounce every so often as though it's tried, and failed, to load.
Terminal states "no home directory"
The only way to get these working is to turn off the "Create mobile account" ones, then manually create an account once the user logs in (with a local administrator on hand to elevate when prompted).

Active Directory does not exist or cannot be contacted

Hi: We have a server 2008R2 x64 bit. The DC is an server 2008sp2. Single domain.local On trying to install Exchange 2010 we get a series of errors:
1. AD doesn't exist or cannot be contacted
2. must be a member of organization Management role or enterprise admins
3. The credential for machine|Administrator is not on bind
4. The user is not logged on to a windows domain.
DCDiag >> no errors. Have read through a lot of posts with these errros but most apply to server 2003 where there were tools used not available in 2008. Help is greatly appreciated. Chris

Hello Chris,
Are you installing Exchange 2010 on the same server that is a domain controller? if this is a different member server, please post the complete ipconfig /all
Make sure the domain controller is a global catalog server
make sure DNS is functioning well dcdiag /test:dns
You donot need to manually add admin to all these groups as exhange 2010 will do this automatically as long as the account you are using is and administrator and a member of the schema/enterprise admins group
Isaac Oben MCITP:EA, MCSE

Corrupted blocks does not belong to any object

hi gurus
In the alert.log I can see a lot of ORA-01578 errors says that there is a corruped block at datafile 10 block 8,but I not able to find any objects releated to datafile 10 block 8, how could I solve this problem because it keeps occuring in the alert.log. Thanks for your time！

hi rp0428
I digged into the tracefile no useful information could be found!
BTW I found this:
**** 2012-01-21 15:45:18.439*
----- Current SQL Statement for this session (sql_id=bfp4j56cgnu1r) -----
create table hj_tmp_1111 as select from zwxt.operator_zj*
----- Call Stack Trace -----
calling              call     entry                argument values in hex
location             type     point                (? means dubious value)
skdstdst()+41        call     kgdsdst()            000000000 ? 000000001 ?
*7FFFF021C328 ? 7FFFF021AE10 ?*
*000000000 ? 000000002 ?*
ksedst1()+103        call     skdstdst()           000000000 ? 000000001 ?
*7FFFF021C328 ? 7FFFF021AE10 ?*
*000000001 ? 000000002 ?*
ksedst()+39          call     ksedst1()            000000000 ? 000000001 ?
*7FFFF021C328 ? 7FFFF021AE10 ?*
*000000001 ? 000000002 ?*
dbkedDefDump()+1076 call     ksedst()             000000000 ? 000000001 ?
*7FFFF021C328 ? 7FFFF021AE10 ?*
Edited by: user2964285 on 2012-2-8 下午11:23

Local Data Address Does not belong to any of this hosts local interfaces

I cannot get through this exception while running
sessionManager.initSession(
localAddress,
new SourceDescription[] { },
0.05,
0.25);
I get this debug output:
Initalizing session (localAddress)
DataAddress: 10.8.0.6/10.8.0.6
ControlAddress: 10.8.0.6/10.8.0.6
DataPort: 2838
ControlPort: 2839
10.8.0.6 is on my tun0 interface, I also tried with 192.168.1.100 which is on my eth2 interface but always get the message in the subject. The only address I can init session on is loopback address.
I use code that looks at local interfaces and grabs ip address from one of them so I'm sure the assigned address belongs to one of my interfaces.
Anybody knows how I can solve this problem?

I solved this one. The problem is JMF seems to use InetAddress.getAllByName() which returns (at least in my case) only single IP address no matter how many addresses I have defined on my interfaces. The problem was solved by placing my IP address that I wanted to use by session manager into /etc/hosts. It must be the first line in /etc/hosts otherwise the other row that matches is used.

Windows 2012 : A domain user who does not belong to the Administrators group can change the passwords

Hello,
Can a domain user
that does not belong to the Administrators group,
be able to change your password ?
I tried to create a domain user account
without administrative access. This user account have
permission to access Windows Server
2012 via Remote Desktop.
I tried to access the same account
to the Active Directory Users and Computers,
i was amazed, because the user account it can changed
the password for multiple accounts,
included one administrator account.
Best regards,
Ricardo

Hi Ricardo,
I agree with Martin, we can check the membership about this user account. Besides, we can refer to following steps to check the memberships:
Start the ADUC on windows 2012.
Right-click the user account and select
Properties, then click the Member Of tab.
Check which group is the user account belongs to.
In addition, i suggest you create a new user account, and check if the new account can change other user’s password.
Best Regards,
Erin

Could we have same name's for User and Groups in Active directory

When iam trying to create a user name " Logistics " under a OU, I am getting a error
"The pre-windows 2000 logon name you have chosen is already in use in this domain. Choose aother pre-windows logon name, and then try again"
We already have a group by the name " Logistics "
Could we have same name's for User and Groups in Active directory?
Thanks in Advance

sAMaccountName attribute is unique. So, the short answer is you cannot.
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

~/oradiag_$USER/.. and "Directory does not exist for read/write" issue

Hi.
Recently I've discovered that ADR was creating a folder in one of ours Oracle 11.2.0.1 server, in the users home like ~/oradiag_$USER/.. The problem is that this logging files dont stop growning, and they are filled only with this lines:
Wed Apr 11 13:40:06 2012
Directory does not exist for read/write [usr/oracle/product/11.2.0/log] [usr/oracle/product/11.2.0/log/diag/clients]
Wed Apr 11 13:40:06 2012
Directory does not exist for read/write [usr/oracle/product/11.2.0/log] [usr/oracle/product/11.2.0/log/diag/clients]
Wed Apr 11 13:40:06 2012
Directory does not exist for read/write [usr/oracle/product/11.2.0/log] [usr/oracle/product/11.2.0/log/diag/clients]
Wed Apr 11 13:40:06 2012
Directory does not exist for read/write [usr/oracle/product/11.2.0/log] [usr/oracle/product/11.2.0/log/diag/clients]
Wed Apr 11 13:41:06 2012
Directory does not exist for read/write [usr/oracle/product/11.2.0/log] [usr/oracle/product/11.2.0/log/diag/clients]
etc
I've searched around internet about this issue all that I've found is a "workaround" by creating those folders. And yep, it works, it stops growning.
Then I checked the others servers that we have, and the problem replicates in some servers with the same Oracle version.
My question is: Why this? Why in some servers ADR is looking for that folder? That folder didnt exist in any of them, but only some servers tries to read/write on it (or, at least, log it) What parameter relies on it?
Regards.

Metalink note
11g Sqlnet Log Shows Error "Directory does not exist for read/write" [ID 797678.1]
Errors Filling log.xml and sqlnet.log: Directory does not exist for read/write [opt/oracle/oemagent/agent11g/log] [ID 1291286.1]

Is it possible to map a Sponsor Group in Cisco ISE to a user group in Active Directory, through a RADIUS server?

Hi!!
We are working on a mapping between a Sponsor Group in Cisco ISE and a user group in Active Directory....but the client wants the mapping to be through a RADIUS SERVER, for avoiding ISE querying directly the Active Directory.
I know it is possible to use a RADIUS SERVER as an external identity source for ISE.....but, is it possible to use this RADIUS SERVER for this sponsor group handling?
Thanks and regards!!

Yes It is possible to map Sponser group to user group in AD and if you want to know how to do please open the below link and go to Mapping Active Directory Groups to Sponsor Groups heading.
http://www.cisco.com/en/US/docs/security/ise/1.0/user_guide/ise10_guest_pol.html#wp1096365

Google drive does not work with specific group but works with all users group!!

Hi,
Why Google drive does not work with specific group but works with all users group?
My rule : Internal > external > all users = works fine
But
Internal > external > A group = not working !!

Hi,
if you require user authentication in Firewall policy rules, the clients must bei Webproxy clients (for HTTP / HTTPS) or TMG clients (for TCP/UDP):
http://technet.microsoft.com/en-us/library/bb794762.aspx
regards Marc Grote aka Jens Baier - www.it-training-grote.de - www.forefront-tmg.de - www.galileocomputing.de/3276?GPP=MarcGrote

Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site

Have an existing ex2010 sp3 organization.
Could not run ex2013cu1 setup from my newly built 2012 server, getting the error in the subject line. I used the command line to run the AD preparation steps successfully from my 2012 DC/GC, then tried to run setup again from the new 2012 server and
still get the same error. The error itself in the log is pretty useless:
[05/07/2013 01:19:13.0137] [0] **********************************************
[05/07/2013 01:19:13.0137] [0] Starting Microsoft Exchange Server 2013 Cumulative Update 1 Setup
[05/07/2013 01:19:13.0137] [0] **********************************************
[05/07/2013 01:19:13.0152] [0] Local time zone: (UTC-08:00) Pacific Time (US & Canada).
[05/07/2013 01:19:13.0152] [0] Operating system version: Microsoft Windows NT 6.2.9200.0.
[05/07/2013 01:19:13.0152] [0] Setup version: 15.0.620.29.
[05/07/2013 01:19:13.0152] [0] Logged on user: DOMAIN\ADMINISTRATOR.
[05/07/2013 01:19:13.0168] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
[05/07/2013 01:19:13.0168] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
[05/07/2013 01:19:13.0215] [0] Command Line Parameter Name='sourcedir', Value='\\h1\f$\junk\installers\server\Exchange\2013cu1'.
[05/07/2013 01:19:13.0215] [0] Command Line Parameter Name='mode', Value='Install'.
[05/07/2013 01:19:13.0215] [0] RuntimeAssembly was started with the following command: '/sourcedir:\\SERVER\f$\junk\installers\server\Exchange\2013cu1 /mode:Install'.
[05/07/2013 01:19:13.0215] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
[05/07/2013 01:19:13.0793] [0] Finished loading screen CheckForUpdatesPage.
[05/07/2013 01:19:38.0762] [0] Finished loading screen UpdatesDownloadsPage.
[05/07/2013 01:19:40.0496] [0] Starting file's copying...
[05/07/2013 01:19:40.0496] [0] Setup copy files from '\\SERVER\f$\junk\installers\server\Exchange\2013cu1\Setup\ServerRoles\Common' to 'C:\Windows\Temp\ExchangeSetup'
[05/07/2013 01:19:40.0700] [0] Finished loading screen CopyFilesPage.
[05/07/2013 01:19:40.0840] [0] Disk space required: 1292445007 bytes.
[05/07/2013 01:19:40.0840] [0] Disk space available: 23767240704 bytes.
[05/07/2013 01:19:59.0762] [0] File's copying finished.
[05/07/2013 01:19:59.0965] [0] Finished loading screen InitializingSetupPage.
[05/07/2013 01:20:02.0934] [0] Setup is choosing the domain controller to use
[05/07/2013 01:20:09.0325] [0] Setup is choosing a local domain controller...
[05/07/2013 01:20:11.0794] [0] [ERROR] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
See the Exchange setup log for more information on this error.
[05/07/2013 01:20:11.0794] [0] [ERROR] Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
[05/07/2013 01:20:11.0809] [0] Setup will use the domain controller ''.
[05/07/2013 01:20:11.0809] [0] Setup will use the global catalog ''.
[05/07/2013 01:20:11.0825] [0] Exchange configuration container for the organization is 'CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=domain,DC=local'.
[05/07/2013 01:20:11.0919] [0] Exchange organization container for the organization is 'CN=DOMAIN,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=domain,DC=local'.
[05/07/2013 01:20:11.0966] [0] Setup will search for an Exchange Server object for the local machine with name 'WEX1'.
[05/07/2013 01:20:12.0028] [0] No Exchange Server with identity 'WEX1' was found.
[05/07/2013 01:20:12.0044] [0] The following roles have been unpacked:
[05/07/2013 01:20:12.0044] [0] The following datacenter roles are unpacked:
[05/07/2013 01:20:12.0044] [0] The following roles are installed:
[05/07/2013 01:20:12.0059] [0] The local server does not have any Exchange files installed.
[05/07/2013 01:20:12.0075] [0] Server Name=WEX1
[05/07/2013 01:20:12.0137] [0] Setup will use the path '\\SERVER\f$\junk\installers\server\Exchange\2013cu1' for installing Exchange.
[05/07/2013 01:20:12.0137] [0] The installation mode is set to: 'Install'.
[05/07/2013 01:20:27.0591] [0] An Exchange organization with name 'DOMAIN' was found in this forest.
[05/07/2013 01:20:27.0591] [0] Active Directory Initialization status : 'False'.
[05/07/2013 01:20:27.0591] [0] Schema Update Required Status : 'False'.
[05/07/2013 01:20:27.0591] [0] Organization Configuration Update Required Status : 'False'.
[05/07/2013 01:20:27.0591] [0] Domain Configuration Update Required Status : 'False'.
[05/07/2013 01:20:27.0841] [0] Applying default role selection state
[05/07/2013 01:20:27.0872] [0] Setup is determining what organization-level operations to perform.
[05/07/2013 01:20:27.0872] [0] Because the value was specified, setup is setting the argument OrganizationName to the value DOMAIN.
[05/07/2013 01:20:27.0872] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
[05/07/2013 01:20:27.0888] [0] InstallModeDataHandler has 0 DataHandlers
[05/07/2013 01:20:27.0888] [0] RootDataHandler has 1 DataHandlers
[05/07/2013 01:20:27.0903] [0] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency. See
the Exchange setup log for more information on this error.
[05/07/2013 01:20:27.0935] [0] [ERROR] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
See the Exchange setup log for more information on this error.
[05/07/2013 01:21:04.0154] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
[05/07/2013 01:21:04.0154] [0] End of Setup
[05/07/2013 01:21:04.0154] [0] **********************************************

Hi,
The cause is clearly described in the log:
[05/07/2013 01:20:11.0794] [0] [ERROR] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
See the Exchange setup log for more information on this error.
[05/07/2013 01:20:11.0794] [0] [ERROR] Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
I'd suggest you check NIC settings and AD configuration.
Hope it is helpful.
Fiona Liao
TechNet Community Support

Event ID 31138 "during the active directory update not -uc enabled agents were found"

Hi All,
I have Lync standard 2013 server on-premise and Exchange Office 365. I have enabled my users for Voice.
When I add a user to a response group I get the warning that the user is not enterprise voice enabled. This is strange as the user is enterprise enabled and can make and receive calls.
I also have Event ID 31138 on my Front End server.
"during the active directory update not -uc enabled agents were found
The following agents are specified as agents but are not UC enabled:
sip:[email protected]"
Any thoughts?

Hi,
Did you change the default SIP Domain before?
If yes. You may need to remove agent from database. As the agents of a Response Group are added to the rgsconfigdatabase, within the database you will find a table called dbo.Agents. When open it you will see an overview of theagents which are member
of the groups. You can do the following steps to remove an agent from this table:
Right click on the dbo.Agents table and select the option Edit Top 200 rows
Search for the user and remove the specific record.
More details:
http://troubleshootinglync.blogspot.com/2013/05/event-id-31137-unable-to-removeadd.html
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there.
Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

User profiles from Active directory when loggedin then userdisplay, useredit shows blank white screen in SharePoint 2013

User profiles from Active directory when loggedin then userdisplay, useredit shows blank white screen in SharePoint 2013
I can login with the these AD users and AD direct import is working just fine. We are not using UPS.
With admin user when I click on the user it shows up proper data. But when I login with the same user it does not show me userdisplay/useredit and shows blank data. Also another strange thing is when I add new item in list with these AD users created by
modified by is blank and its really strange. I checked user information list, tried to rerun user sync with direct AD import option but no success.
MCTS Sharepoint 2010, MCAD dotnet, MCPDEA, SharePoint Lead

Hi Amit,
According to your description, my understanding is that the page is blank when the use accessed /_layouts/15/userdisp.aspx and the created by field was blank when the user created a new list item in SharePoint 2013.
I tested the same scenario per your post, however I cannot reproduce your issue.
For troubleshooting this issue, I recommend to verify the things below:
Check the permission of the user in the corresponding site collection to see if he can access /_layouts/15/userdisp.aspx.
Delete the user from AD and SharePoint, then re-add the user to AD and grant proper permission to the user in SharePoint to see if the issue still occurs.
Did this issue occur with all the users? Add a new user in AD and test the same scenario.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

How can I authenticate a User In Windows Active Directory?

I need to authenticate a user in Windows Active Directory, but I found use the code below will return true if the user name and password are both correct and false if one of them is wrong. But when I input a user name which is not exist in Active Driectory with a blank password, it will also return true. What shall I do? Ask every user must input a password withnot blank?
Please give me some help to solve this problem. Thanks a lot.
Code:
private Context ctx = null;
Hashtable env = new Hashtable ();
boolean isValid = false;
try {
this.setEnvironmentProperties();
String domainName = AuthenticateResources.getString("mydomain.com");
//set the name of domain with the user name
String fullName = name + "@" + domainName;
env.put(Context.INITIAL_CONTEXT_FACTORY, "com.sun.jndi.ldap.LdapCtxFactory");
env.put(Context.PROVIDER_URL,"ldap://mydomain:389");
env.put(Context.SECURITY_AUTHENTICATION,"simple");
//set user related information
env.put(Context.SECURITY_PRINCIPAL, fullName);
//set user password
env.put(Context.SECURITY_CREDENTIALS, password);
//validate user
ctx = new InitialDirContext(env);
isValid = true;
}catch (AuthenticationException ex){
isValid = false;
catch (NamingException ex) {
throw ex;
}finally{
this.freeContext();
return isValid;

This is usually a problem if Anonymous Binding is enabled. I have faced this in other Directory Servers, but I am not familiar with Active Directory.
I think by default Active Directory disables Anonymous Binding, but you may want to check.

CREATE DIRECTORY Does not Create Any Directory in My File System Hard Disk

create or replace directory emp_dir
as 'D:\emp_direc';
Main Question:
*1. Transaction succeeded, but i have not seen emp_direc created in my D: drive. I'm running Vista Home Edition x32. Any idea why directory does not show up?*
Optional:
Extra info:
after creating a directory i did: - avoid comment sign
--create table oldemp ( fname char(25), lname char(25) )
--organization external
--(type oracle_loader
-- default directory emp_dir
-- access parameters
-- ( records delimited by newline
-- nobadfile
-- nologfile
-- fields terminated by ','
-- (fname position(1:20) char,
-- lname position(22:41) char)
-- location ('emp.dat')
--parallel 5
--reject limit 200;
Table created successfully, then I did
describe oldemp;
Name NULL Type
FNAME CHAR(25)
LNAME CHAR(25)
2 rows selected
Extra questions:
*2. emp.dat carries all the table data which can make data more portable to different oracle servers. However, it is one time operation, once table is populated, i can not update, insert, delete any rows. Thats what i know, if i'm wrong please let me know. If what i said is true, just confirm it if you don't mind...*
*3. Parallel 5, allows five oracle servers to deal with the emp.dat file at the same time. So won't there be any conflict! Maybe one server wants to read a certain data while the other server wants to delete it. Can you clarify please....*

user11164565 wrote:
create or replace directory emp_dir
as 'D:\emp_direc';
Main Question:
*1. Transaction succeeded, but i have not seen emp_direc created in my D: drive. I'm running Vista Home Edition x32. Any idea why directory does not show up?*
<snip>
From the fine SQL Reference Manual found a tahiti.oracle.com, in the prerequisites for the CREATE DIRECTORY command:
For file storage, you must also create a corresponding operating system directory, an ASM disk group, or a directory within an ASM disk group.
Your system or database administrator must ensure that the operating system directory has the correct read and write permissions for Oracle Database processes.
Privileges granted for the directory are created independently of the permissions defined for the operating system directory, and
the two may or may not correspond exactly. For example, an error occurs if sample user hr is granted READ privilege on the directory object but
the corresponding operating system directory does not have READ permission defined for Oracle Database processes.

"Domain Users" group in Active Directory does not belong to any Group Membership in LC

Similar Messages

Maybe you are looking for