Don't transfer data to SD card or you will ending losing your data if interruption happen

Hello guys,
Don't fall in this trap and let the phone move data from internal memory to SD card to free up space as it can be interrupted for some unkown reasons and end up losing your data. ( Interruption in my case was screen auto lock i believe )
It happened to me yesterday when it was moving the pictures and all of them are gone now.
I contact the customer care and they said they can't help or do anything but asked me to format the SD card
I found users of Xperia L was facing same bug/issue before: https://talk.sonymobile.com/t5/Xperia-L/Transfer-of-data-to-SD-card-interrupted/m-p/342469
What i found that the capacity of SD card increased and a folder called LOST.DIR was shown there..
Any ideas how to retrive this as sony aint helpful at all?
P.S: SD card is SanDisk 16 GB class 10

Issue happened again even after i moved pictures manually to SD Card.
I formatted SD card, re-added it to the phone and used file commander to move them
Screenshot: http://oi57.tinypic.com/aomebk.jpg
What is happening?

Similar Messages

HT201210 I am unable to update my IPhone 4 to the IOS 6. I managed to back up and transfer and then when it asked to update I said yes and the sync process starte, left it overnight and it came up with an error if continue you will loose all your data.

I am unable to update my IPhone 4 to the IOS 6. I managed to back up and transfer and then when it asked to update I said yes and the sync process started, left it overnight and it came up with an error if continue you will loose all your data. So stopped! Help!

Are you currently on ios 4? If so that's where the backup comes in. You'll need to restore your backup once the software is updated.

HP Pavilion dv6 USB ports don't transfer data

My USB ports stopped transferring data a few days ago, immediately following an update; however, they continue to provide power to my peripherals.
Any insight into this problem or its solution would be greatly appreciated!

sp3ktr4l wrote:
My USB ports stopped transferring data a few days ago, immediately following an update; however, they continue to provide power to my peripherals.
Any insight into this problem or its solution would be greatly appreciated!
You will need to reinstall the original chipset drivers.
Go to the Start Menu -> click on All Programs -> click on Recovery Manager (open recovery manager).
From there, under "I Need Help Immediately" you'll need to select Hardware Driver Reinstallation -> click on Next. When you see the list of drivers available select "ATi (or AMD) VGA Driver" and click next. once it's done hit finish, then it will restart your computer and you can test it out.
If this didn't work, reply with your specific model number or PN (product number).

So I think there should be an app with flash cards that you can fill in your own info with. I'm studying for a test, and how awesome would it be to have my flash cards on my phone!!! Is there already an app like that?

I think there should be a flash card app that let's u put in ur own info. I'm studying for a test and I think it would be really cool to have my flash cards in my phone!! Is there an app like that already?

http://www.appshopper.com/education/flashcards

How can you get back into your iPhone if you don't remember the passoword?, How can you get back into your iPhone if you don't remember the password?

Help! My daughter changed the password on her iPhone and she can't remember it. How can she get back into it. Restoring is not an option so I'm hopeful there is another way. Thanks!

Hey KimmyP123,
Thanks for the question. I understand your daughter has an unknown passcode on her iPhone. The following article provides a few solutions for this situation:
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/HT1212
I notice you are looking for solutions other than restoring, the article does outline how you can use iCloud's Find My iPhone:
If you have Find My iPhone enabled, you can use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.
Thanks,
Matt M.

What is the difference between "don't transfer" and "transfer"?

After upgrading a song to iTunes Plus, I will sync my iPod Nano. Upon insertion of the USB cord I will get a message that reads something like this: There are songs on Susan's IPod Nano that are not in your Music Library, "transfer" or "don't transfer". Then it claims if you click "don't transfer" you will lose something on your iPod. But if you click "transfer" you get a duplicate right back into your Library; the 128kbts version, and the 256kpts version. My question is, am I correct in clicking "don't transfer"? I don't want duplicates anywhere! And what remains on he iPod, the 256kbt version or what? Yesterday, I called Tech Support, and the gentleman at the other end had absolutely NO CLUE what I was talking about! First he told me "transfer", then he told me "don't transfer". Can someone who has been through this help? Many thanks.

Hmmm, good question. If you use auto updating with your iPod, my gut feeling is that the old version that is in the iPod but NOT in the iTunes library anymore will be wiped from the iPod if you pick don't transfer.
Basically when you auto update, iTunes matches the contents of the iPod to that of iTunes based on whatever rules you are using (updating all or updating specific playlists). If it isn't in iTunes then it gets removed from the iPod. When you plug in the iPod, if iTunes "sees" a purchased track on the iPod that is not in the library, before it goes ahead and wiped it off the iPod, it gives you the opportunity to first save it to your library. If you say DON'T transfer it, then I assume (but I don't know for sure) that iTunes then goes about its normal updating routine which would remove the track from the iPod since it isn't in the library.
Patrick

HT3669 I have a HP Laserjet M1120 but I don´t know how to scan. Can you help me?

I have a HP Laserjet M1120 but I don´t know how to scan. Can you help me?

Your Model apparently needs to use Apple's "Print & Scan" which is found in Applications>System Preferences>"Print & Scan". There you will follow the following instructions from the HP Support site to Scan, for instance:
Place the item that you want to scan on the scanner glass, or load it into the automatic document feeder (ADF) if your printer has one.
Click the Apple menu (# ), and then click System Preferences .
Click Print & Scan (# ).
Click your printer in the left pane.
Click Scan , and then click Open Scanner .
Click Show Details . The details of the scan display, including options to change scan settings.Figure 4: Example of the Show Details scanning screen#
Change any scan settings as necessary, and then click Scan .NOTE: Make sure to select either the Flatbed mode or the Document Feedermode, depending on your printer and how you plan to scan.
Hope this helps

HT1688 If i remove sim card from iphone, will contacts be on my sim card ?

I'm getting a new android tomorrow and I'm wondering if my contacts will still be on my sim card. Do i have to do anything on my iphone to put contacts on sim card ?

No. The iPhone does not save anything on the SIM card. You will have to sync your contacts to either a supported application on the computer, or a cloud service that you will be able to access via the Android phone. First thing that comes to mind is Google.

Disable "Transfer data to SD card" message

This message is useful once, and then becomes pointless and annoying. I'm not going to install an SD card, and I'm not going to delete data when I still have multiple GB free. Please allow us to disable this silly message in a future update.

@Tuesday20150505
Here is the answer
http://talk.sonymobile.com/t5/Xperia-Z-ZL-ZR/How-do-I-disable-the-notification-quot-Transfer-data-to...
SophiaW
Sony Xperia Support
Posts: 103
Registered: a month ago
Re: How do I disable the notification "Transfer data to SD card - Internal storage is 75% full&
Options
3 weeks ago
Hi guiaka
Welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
This message will keep re-appearing until you have freed up some space on the device. I advise deleting any apps you don't use or need any longer and deleting any music, photos, videos you don't want or transferring them to an SD card or your computer to free up space as well.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Transfer data to sd card fails to start

Hi all,
In the storage section of settings on my Xperia Z2 there is a "transfer Data to sd card" option. it use to work just fine. Once the internal storage was awfully full and came a notification that said "75% full, transfer data to sd card" tried it like always but this time it fails to start. When I try to run it from inside the settings, also fails to start.
Any suggestions are appreciated.
Thanks
Solved!
Go to Solution.

Use the file commander app > cut > paste > on the SD card.
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

How do I disable the notification "Transfer data to SD card - Internal storage is 75% full"?

How do I disable the notification "Transfer data to SD card - Internal storage is 75% full"? after update to Lollipop

Hi @rainbowgoblin I should use the File Commander app, you could read about it here:
https://play.google.com/store/apps/details?id=com.mobisystems.fileman&hl=es_419 You can also set with the Android adb, to store apps in the SD Card intead of the internal memory. You should have ADB installed, the SDK up to date, and the USB debugging turned on from your device on the Developer Options.
Then plug your Xperia to your computer and from a command prompt (you'll probably have to be in the folder where adb.exe is, most likely something like C:\Program Files (x86)\Android\android-sdk\platform-tools\adb.exe) run this command: adb shell pm setInstallLocation 2 (where 0 represents the internal storage and 2 represents the SD Card storage). To clear warnings about the available memory space on your device you can run: adb shell pm hide com.sonymobile.storagechecker I hope can be useful. Best Regards,

When i run labview6.1 on my pc with windows the "DAQ Solution " was gary doesn't work i don't know why ?i don't have a daq board card is that a reason? i want to know what should i have to use labview in data acquisition?

i am using a platform windows 98 ,and labview 6.1
thanks in advance

With the NI-DAQ driver, you can build VIs, but you can not acquire data until you have a Data Acquisition card. You can get these from National Instruments over the web or by calling.
J.R. Allen

Don't want to pollute my ipad how can I selectively transfer data from mac mini?

I have had users on this computer that have downloaded questioanble resources. I have grandchildren and we like to play on my ipad I do not want any objectionalbe video on this ipad. I also don't want to make my creative content available for duplication to a user who had hooked up their iphone. I am attempting to start over with my ipad. I have tried to keep them off the main computer but I need safeguards since the user is opportunistic. They also have a better understanding and advantage I am however an administrator at least as much as much as my husband allows me. I believe this user could still manupulate via wireless or remote with her iphone. I want to stop her completely but I know to challenge this user completely would mean an esculation. I have seen my email with another adress attached . I sometimes put in the exact password and still find for a short period cannot get into e-mail an Apple password might not work? Is there script I can see that would suggest a problem.

Your situation is a little bit confusing to me, but I will give this a try. I hope that I fully understand what you are trying to do.
There is no way that anyone can access your iPad wirelessly or remotely at all. It just is not possible to do that in iOS. Because of the sandboxed nature of the iOS, it will not allow that type of interaction. However, if your iPad has been "polluted" by another user or that user's content, you might want to totally erase the drive and start all over again, and not restore from a backup. Erase it and start all over again completely. You will still be able to download most if not all of your paid content again as long as you use the same Apple ID that you used to make the purchases.
Settings>General>Reset>Erase all content and settings will totally wipe the iPad clean and you will have to activate the device all over again. Don't restore from the backup when you get to the point during the activation where you are prompted to do so.
If you want to download all of your constant again, read this.
Downloading past purchases from the App Store ... - Support - Apple
Erasing your iPad and starting over again is pretty radical if you are not absolutely sure that this users has really sabotaged the device. Please make sure that you realize what you are doing, and if I am reading the situation incorrectly, please state that in your response.
What you are saying about this user having access to your computer is certainly concerning and without knowing what the circumstances surrounding her ability to do so, I can only recommend that you discuss this situation with your husband and take steps to prevent her from using it, or at least from using it without you being there to observe.

My aperture keeps crashing after a recent transfer of pics from card reader

running 10.7.2 and Aperture version 3.2.2. Recently was transferring files from an Memorystick pro duo in a card reader (which has been done many times before). Everything seemed to transfer fine and i ejected the card. That's when the trouble started. I haven't been able to run Aperture since. The program opens up, then says it is "procesing" after being open for several seconds. Then it crashes and shuts down and an error message comes up. Don't know what to do and would hate to lose many pics!! Help please!!!!! First part of error message is copied below (let me know if more of it is needed):
Process:         Aperture [2119]
Path:            /Applications/Aperture.app/Contents/MacOS/Aperture
Identifier:      com.apple.Aperture
Version:         3.2.2 (3.2.2)
Build Info:      Aperture-201095000000000~4
Code Type:       X86-64 (Native)
Parent Process: launchd [123]
Date/Time:       2012-01-23 01:36:35.533 -0700
OS Version:      Mac OS X 10.7.2 (11C74)
Report Version: 9
Interval Since Last Report:          47854 sec
Crashes Since Last Report:           7
Per-App Interval Since Last Report: 299 sec
Per-App Crashes Since Last Report:   7
Anonymous UUID:                      57146C2E-A2A5-4D45-8108-A05FA6474D3F
Crashed Thread: 22
Exception Type: EXC_BAD_ACCESS (SIGBUS)
Exception Codes: 0x000000000000000a, 0x0000000128775000
VM Regions Near 0x128775000:
    MALLOC_LARGE (reserved 00000001277bb000-0000000128765000 [ 15.7M] rw-/rwx SM=NUL reserved VM address space (unallocated)
--> mapped file            0000000128765000-0000000128a58000 [ 3020K] r--/rwx SM=COW /Users/USER/Pictures/*.JPG
    MALLOC_LARGE           0000000128a58000-00000001292e3000 [ 8748K] rw-/rwx SM=PRV
Application Specific Information:
objc[2119]: garbage collection is OFF

Will it be a problem if i uninstall/reinstall Aperture? I shouldn't lose my photo database, correct?
No, reinstallation will not affect your database.
I haven't tried with a Guest account, is it really worth trying?
I suggested that, to narrow down the source of the trouble. The usual reasons for crashing are:
A corrupted Aperture database
A newly imported corrupted image inside your database
Inconsistent Preference settings
Insufficient permissions to access parts of your database
Wrong formatting of the dirive containing the Aperture Library
Network problems, if the library or masters are on a network volume
Insufficient memory or hard disk
Incompatible Aperture plug-ins
Incompatible frameworks in the system library (may be cause by installing third party apps, most often Final cut or other multi media software)
A problem with the Aperture Apllication itself
A problem with the OS
Broken hardware
User error
If your error message is so unspecific, it may be looking for a needle in a hay stack to find clues.
If Aperture does not crash when working from a different account (not necessarily the guest account - any other new account you create for yourself for testing purposes will do) then the reasons 5-12 will be unlikely, since those are system wide problems. Then you should try to fix your library and preferences.
If on the other hand it even crashes working from a different account, I'd suggest to reinstall Aperture or reinstall Lion, since the problem is not tied to your account.
If other applications are acting up, too, I'd recommend to run a hardware test and to repair your system volume.
To fix Preferences and Library, see here:
Aperture 3: Troubleshooting Basics: http://support.apple.com/kb/HT3805
I did try that eventually and while it allowed me to access Aperture after i completed that, once i closed it and opened it the next time it began crashing again like before.
Since you already did repair your library, try rebuilding next and removing the Aperture Preference file and presets, as described in the trouble shooting basics. After a crash it is really a good idea to rebuild the library and recreate the preferences, since crashing and/or force quitting can leave those inconsistent.
If you can work after repairing, but then Aperture crashes again, this looks very much like a single, defective image inside your library. Do you remember the projects you imported recently? The next time you start Aperture, I'd defer the generation of Previews. Press the Shift key immediately after you start Aperture to prevent preview generation for that session. Then inspect carefully your most recent imports.
Regards
Léonie

Transfer data rate

OK, so I have resolved an older problem only to have dropped frames all the time during playback. How do I find out the maximum transfer data rate my processor can handle? ANy suggestions on how to get around an issue like that? If I want clean crisp graphics, how can I avoid the DV codec - which I understand is awful for graphics- yet still be able to play my sequence back without dropped frames?

Hi Kristin,
If I read correctly, you moved everything off your internal drive to an external. This external drive - is it a SATA drive, or FireWire? You mentioned SATA before, so I'm inclined to think that's what it is. If it IS an external Serial ATA drive, when you got it, did you zero all data on the drive before using it?
Also, when you started using this new external, did you change your capture/render drive settings in your prefs in FCP? If not, they may still be set to your system drive, the default, instead of your new external hard drive. If this is the case, change it in FCP, save, and quit. TRASH the render files and move all the capture files from the system disk. re-open FCP, reconnect the moved capture files (if any), and of course, you'll have to re-render most of your timeline. when you do this, it'll render everything to the new hard drive (SATA, yes?), and you SHOULD be good to go.
Now, as for interfacing with a monitor or an external device - are you going throgh firewire to a camera or deck and then to your video monitor? If so, no matter what, you won't be able to view anything but a single frame at a time with uncompressed. The only other thing that I can think of is that your camera/deck/external video device is powered on while you're trying to do this. In order to monitor Uncompressed externally, you need a pretty spiffy video capture card like the Kona. But internally, you should have no issues. So, make sure any external device except a hard drive is turned OFF, and disconnected.
If none of this works, what you may want to do is change your sequence settings back to NTSC/DV for compression, and when you're totally done editing your project, you change them BACK to uncompressed, render, and export an uncompressed file to an external hard drive, take that drive to a video production company, have them slap it on a DigitalBeta tape as a master, and you're good to go.
Hope this helps...
-Kris

Don't transfer data to SD card or you will ending losing your data if interruption happen

Similar Messages

Maybe you are looking for