Don't wanna load audio plugin in FCP

I don't wanna load audio plugin in FCP 5 (audio plugin from Protools and Logic that sharing plugin)
Who know how to unload that third party audio plugin ?
Thank you for every answer.

Version is FCP-X 10.1 with OSX 10.7.2
I use the Ctl-Shift-S to detach the audio from the video, then I can create a single audio-only storyline for the whole project (grouping and using Cmd-G) and add transitions etc to it. It is sometimes difficult to get it to work because the usual "snap" function which works well for video doesn't always work accurately enough for audio (much shorter "frames") so you sometimes get a few samples overlap, a few samples gap between clips or a few samples of a spurious audio clip between clips which are invisible except at sample zoom - and the transition complains of "not enough media". I have had to learn various tricks to get this sorted out!
However, before I go any further - I have found the problem. If I replace the clips in the audio storyline from the original media then the transition works properly. It's something to do with what I was doing to the clips before I broke them apart.
Before I learnt this "separate audio storyline" procedure I was detaching every other audio clip, creating overlaps and using the fade handles. The projects where I used this technique originally, then converted to the "audio-only" storyline are the ones having the trouble. If I start from the raw audio/video storyline, detach the audio and make the separate "audio-only" storyline directly then the transitions work perfectly as they should. If I have previously fiddled with the fade handles, overlaps etc then some of the transitions don't work in the new storyline!

Similar Messages

Fcp wont load cause of audio plugins

Hi. I work on Fcp studio and Logic pro. I have a lot of audio plugins for Logic espescially waves. But now fcp wont load cause it crashes when it gets to a certain plugin. I don't want to use audio plugins in fcp as I do my audio in logic.
Why has fcp seen my logic plugins and how can I stop this, I can't run fcp. I've tried dragging the components folder out but no luck. There must be a resolution to this, it's driving me nuts.
Many thanks
Antony.

I've had the same problem.
FCS maintenance pack is not really an option - it disables the plugins globally, so Logic wont load them. It's also expensive (for what it does) - $169.
The easiest workaround I found is to shift the plugins (located in the /Library/Audio/Plug-Ins/Components/ folder) to - for example - another folder (not called 'components') on the desktop, before launching FCP. Then you can move them back before launching Logic. A pain, yes, but until Apple fixes their problem...waiting.
None of the plugins in this folder are core to FCP (if you're like me they'll be all Logic plugins), so there are no consequences to FCP. You could probably keep some in the folder, as I think the problem has got to do with the number of plugins (a different plugin crashes FCP every time for me).
Cheers,
Dan

"Failed to load Audio Unit" errors on opening project, but plugins actually load OK

I'm experiencing an issue where Logic Pro X will give an error saying "Failed to load Audio Unit" when loading a project, but when you actually click "Continue" and go on into the session the plugins are there and work fine - playback and bouncing all work fine, and the plugins were listed in the error dialogue all work fine.
Some notes on the error:
- it's happening on a range of different plugins on my system - ilok-protected plugins (Soundtoys, Slate among others), UAD plugins, and non-dongled plugins (Plugin Alliance stuff, among others)...
- seems that as a project is worked on over time, at some point the error starts to happen on a save, and then becomes apparent on the next reload... it also translates between systems - a couple projects where this is occurring were started in a different studio (where the error first showed up), and working on them at my studio the error is still apparent.
- also it seems like the error doesn't happen every time a project is loaded. If I'm launching Logic fresh and opening a project, the error will occur, but if I close and open another project and the come back to the first project again, the error won't show up on the first project anymore... but if I quit Logic and open that project again, it'll start happening again.
Has anyone else noticed this error?

Start Logic and hold the control key to disable the audio engine.
You should be able to load the project now, and disable the offending plugin. When done, turn the audio engine back on in the audio drivers preferences.

Possible to avoid scanning/using audio filters when FCP loads?

Hi. I have hundreds of audio plugins wich I never use in FCP. They use a long time to scan on FCP startup and I wondered if there was a way to turn them off/avoid loading them?

Also plugin manager from digital rebellion. It's part of a very useful suite of tools.
http://www.digitalrebellion.com/promaintenance/

Third party Audio plugins don't work here

I'm wondering if someone is able to use third party Audio plugins (like Waves, Sonnox, Sonalksis, etc.) in FCPX. I can't. I have them for Logic and I can see them in FCPX, but if I try to use them I encounter various issues (settings not saved, FCPX crashes, and so on...).
Only Logic plugs work fine

There are NUMEROUS of issues with third pty AU's in FCPx. I have reported many of them. Settings not getting stored, crashes etc etc etc...
Plugs that work perfectly in Logic Pro....
AU integration in FCPx is highly erratic. Unfortunately.
You also wanna be VERY careful when using .CAF files in FCPx which have more than two channels of audio. Distortion etc... are bound to happen unless you take appropriate measures and disable channels not pertaining to stereo.

I downloaded PS CC 2014 and I don't know how to find and load my plugins, OnOne and Nik

Where do I find and load my plugins?

You will need to reinstall these. It may be necessary to get new versions and/or pay for an upgrade to get versions that are compatible with PSCC 2014. I can use the Nik Collection in 2014 but would have to pay to upgrade OnOne and chose not to. You may have different versions, so don't assume this is applicable to you.

FCP want open. It hangs up on (loading audio filters) Please help.

I run PROTOOLS on my system with waves platnum effects plugins.

There were some of these audio plugins, that didn't work with FCP, can't remember the list, but you might search for audio plugins in the Support area here... there was an article about it. You could remove those plugins and see if it doesn't clear it up.
Jerry

Third Party VST audio plugins - stereo, multichannel

Hello,
I am developing VST audio plugins. I have the trial version of Adobe Audition CS5 on Mac OSX and as I started to realize this version of Audition doesn't support 64-bit VST plugins, is this correct? or is there something I should do for Audition to scan and load my 64-bit plugin?
Another question I have is well I just made a 32-bit version of my plugin for Audition to find it and it works fine when its a stereo 2 input 2 output plugin.
But I have a plugin that is 2 input 4 output and although making it 32-bits Audition will scan and find it, It will always be disabled in the plugin list and I can't find a way to enable the plugin.
I would like to know if its possible to have a plugin that has more than 2 outputs and what do I have to do to enable it since the standard way won't do it (although the plugin is found). And also what is the deal with 64 bit plugins and Audition CS5.
Any information would be highly appreciated!
Thanks you very much.
Sergio.

sergexte wrote:
Hello,
I am developing VST audio plugins. I have the trial version of Adobe Audition CS5 on Mac OSX and as I started to realize this version of Audition doesn't support 64-bit VST plugins, is this correct? or is there something I should do for Audition to scan and load my 64-bit plugin?
This release of Audition is 32-bit only and thus only supports 32-bit VST plug-ins. You may wish to try your 64-bit VST in Premiere Pro as it is a 64-bit app that also supports third-party VSTs
sergexte wrote:
I would like to know if its possible to have a plugin that has more than 2 outputs and what do I have to do to enable it since the standard way won't do it (although the plugin is found). And also what is the deal with 64 bit plugins and Audition CS5.
You can have plug-ins with more than 2 outputs, however, we don't support plug-ins with asymmetrical channel configurations. There's a lot of details that need to be attended to in order to get that to be bulletproof. So if you had something that was 6 in and 6 out, that should be possible in this version of Audition.

DVCPROHD Audio Plugin Failure

I couldn't find a place where this really fit—it's an audio plugin question, but I don't use the Pro Software—so I put it in the general OSX category; feel free to move it.
My issue is with the DVC PRO HD Audio plugin (/Library/Audio/Plug-Ins/HAL/DVCPROHDAudio.plugin). I am using a simple afplay command to try and add sounds on startup/login, but I note the following error when using the command through terminal:
afplay[18548:903] Error loading /Library/Audio/Plug-Ins/HAL/DVCPROHDAudio.plugin/Contents/MacOS/DVCPROHDAudio: dlopen(/Library/Audio/Plug-Ins/HAL/DVCPROHDAudio.plugin/Contents/MacOS/DVCPROHD Audio, 262): no suitable image found. Did find:
/Library/Audio/Plug-Ins/HAL/DVCPROHDAudio.plugin/Contents/MacOS/DVCPROHDAudio: no matching architecture in universal wrapper
2010-08-10 21:08:07.249 afplay[18548:903] Cannot find function pointer NewPlugIn for factory C5A4CE5B-0BB8-11D8-9D75-0003939615B6 in CFBundle/CFPlugIn 0x10020d3a0 </Library/Audio/Plug-Ins/HAL/DVCPROHDAudio.plugin> (bundle, not loaded)
For some reason the audio plug in is not loading correctly, and i can't figure out why. To my knowledge I have never messed with the audio plugins on my computer. Kicker: the command worked the first time I used it, but has failed in subsequent uses. Not sure if restart fixes the issue. Any ideas?
-Kai

I have this problem happening on a fresh OS X 10.6.5 Install + Logic Studio 9. The console log is filling up with it like crazy. I guess I will remove it from the system for now, but I sure would like to know what it is and what affects the removal of it may have.
I get the same errors as everyone else, and my plug shows as Universal with a version number of 1.3.2.
System Preferences[713] Error loading /Library/Audio/Plug-Ins/HAL/DVCPROHDAudio.plugin/Contents/MacOS/DVCPROHDAudio: dlopen(/Library/Audio/Plug-Ins/HAL/DVCPROHDAudio.plugin/Contents/MacOS/DVCPROHD Audio, 262): no suitable image found. Did find:
/Library/Audio/Plug-Ins/HAL/DVCPROHDAudio.plugin/Contents/MacOS/DVCPROHDAudio: no matching architecture in universal wrapper
System Preferences[713] Cannot find function pointer NewPlugIn for factory C5A4CE5B-0BB8-11D8-9D75-0003939615B6 in CFBundle/CFPlugIn 0x2000fb200 </Library/Audio/Plug-Ins/HAL/DVCPROHDAudio.plugin> (bundle, not loaded)

FCP4 gets hung up while loading audio filters, then quits

I have only very cursory knowledge of Final Cut Pro. It is installed on my G4, and has been used successfully in the recent past.
Upon opening FCP4 without my iLok in, I am prompted to purchase or cancel using all of my Waves plugins for ProTools, one by one. When I use the iLok, then FCP4 gets hung up on loading the audio filters, and subsequently "unexpectedly" quits. I have tried shutting down and rebooting with the ILok in place - no luck there.
I was unaware that Waves even operated as a plugin inside FCP, yet opening FCP seems to require my Waves authorization, but when I give it, FCP crashes. What could my problem be?
This problem just started last evening after sporadic but successful use of FCP, as well as fully operational use of Waves plugins within ProTools.

AudioUnit Manager 1.1 will let you create default sets of AudioUnit plugins.
Third party components are usually to blame with FCP failing to start up.
With this free app you can create sets which are specific to a particular program.
For example, create a set for FCP with the all offending plugins disabled.
When you boot up, they are placed in a "disabled" folder and stay disabled until you launch a set that includes them.
Get AudioUnit Manager 1.1 here (free- donation ware)
http://www.grantedsw.com/aum/

Waves bundle in audio plugin list?

Hi,
I don't see my waves bundle in the audio plugin list in fcpx?
In Pro Tools I see it and it is working.
I do see my psp vintagewarmer plugin and my izotope plugin.

They have to be AU format, and installed for Logic. FCP X reads from Logic, is not a DAW so it won't read all audio plugins. But, you can get Automatic Duck for free, and export and OMF to go to ProTools or SoundTrack Pro or Logic.

Teamspeak3-server: unable to load database plugin library

After applying the latest package version, I get: "unable to load database plugin library "libts3db_mariadb.so".
It used to run perfectly fine before. libts3db_mariadb.so is present at /usr/lib/
I am stuck and don't know what to check next. Please advise.

It seems the same conclusion is discussed on the AUR already; did you read that?
https://aur.archlinux.org/packages/teamspeak3-server/

Is it possible to hook a USB external hard drive to an iPad?.....the HD has video on it that I wanna watch on my iPad but don't wanna store it on iPad or iTunes....and way format does the video need to be in to watch on iPad?

Is it possible to hook a USB external hard drive to an iPad?.....the HD has video on it that I wanna watch on my iPad but don't wanna store it on iPad or iTunes....and way format does the video need to be in to watch on iPad?

There are some wireless external hard drives that can be used with the iPad.
The Kingston Wi-Drive, which costs $50 for the 16 Gigabyte, and then $30 more for every 16 gigs more. It works by you turning it on and then accessing the files on it from an app that you download on your iDevice. You can access music, movies, and other stuff. No connections or anything, it works like a WiFi connection, you connect to it from the setting on the iPad under wireless networks.
Then there is the Seagate GoFlex, which some would recommend over the Wi-Drive. But this one costs $199 and had 500 Gigabytes of storage. It works the sameway as the Kingston: no wires, runs over its wireless connection. You can actually fit up to 300 HD movies on it.
Another option:
Expand your iPad's storage capacity with HyperDrive
http://www.macworld.com/article/1153935/hyperdrive.html
On the road with a camera, an iPad, and a Hyperdrive
http://www.macworld.com/article/1160231/ipadhyperdrive.html
Pad2, the new iPad Supported Video Formats & Movie Formats
H.264 video up to 1080p, 30 frames per second, High Profile level 4.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format
 Cheers, Tom

Writing an Audio plugin for Final Cut Pro

Hi all
There doesnt seem to be much info out there about writing plugins for FCP... I've looked at FXBuilder and FXScript, but they only seem to deal with video. I want to write a plugin that will normalize all of the clips on my timeline (I know normalizing is a sin to some audiophiles, but there are situations where I dont have time to take everything into Pro Tools or Soundtrack Pro and just need reasonable levels across an entire project). So my question is, would I need to write a plugin for FCP specifically and if so, is there an SDK or sample code somewhere, or should I write this as an Audio Unit plugin and if so, where do I start? Any help or advice would be appreciated
cheers

I'd think that the ADC is where you should start... (Apple Develeopers connection) http://developer.apple.com/ Might find the SDK you need there.
Also Joe at Joe's filters or Graeme Nattress might be of help. Great guys both...
http://www.joesfilters.com
http://www.nattress.com
Jerry

How to use third party plugin with FCP, I'm lost...

Hello,
I need informations about how to use plugins with FCP.
I do edit mostly classical concerts. I'd like to do basic audio post prod, without swaping between Soundtrack and FCP.
I need two simple things : add reverb (the built in reverb is really bad), and enhancer. So I looked for specialised third party audio plugins, but I couldn't manage to find something that work for me...
- Do FCP support VST plugins ? How to install them ?
- I tried a few audio units plugins. It works, but I couldn't get a friendly visual interface, like VST effects racks. Is it possible in FCP ?
- does anybody know a good reverb plugin with a friendly interface compatible with FCP ?
Please help, I'm lost !
Emmanuel

I need two simple things : add reverb (the built in reverb is really bad), and enhancer.< </div>
What you NEED is a better recordist at the concert, someone who understands the peculiarities of your specific video deliver plans.
Soundtrack Pro is right up there with Motion in its impossible-to-understand interface paradigm shift away from industry standard tools. However, if you are in the position of being a sound editor, you must find a tool that works for you. STP might not be the one, certainly isn't for me. You could always try Logic. Yeah, good luck with THAT.
bogiesan

Don't wanna load audio plugin in FCP

Similar Messages

Maybe you are looking for