Double call of abap proxy client

Hi expert,
I have a scenario which an abap program will send a data to third party web service via sender abap proxy. I notice some of the message was double in sxmb_moni which should be called 1 time. Any idea why this happen? Abaper said that the abap program only call my proxy client 1 time. Thanks.

Hi,
Any possible the abap proxy send double message?
There is no way for this to happen.
Either your report for proxy ran twice consecutively or the proxy call method is in loop in report.
Sice u said that only 1 time it happened, i think th proxy call method is not in loop , and may be report ran twice.
Please check the ABAP code if any loop is there or proxy called twice in the report..
Babu

Similar Messages

Missing asyn abap proxy client message in ECC

Hi,
I have a asyn scenario which an abap program will send data from ECC to PI using abap proxy client. My problem is i notice some of the message was no send to PI. Checked in PI SXMB_MONI no message was found. Any idea where the message was stuck? I check on smq1 in ECC also found nothing in the queue.
Thanks.

Hi ,
KIndly check with the abap program if its thrwing any dump . If every thing is fine with ABAP program then might be its issue of RFC destination . check with transaction SPROXY are u able to connect and your sender interface is reflecting there if yes then double click on your interface open the proxy andthen click on GOto and click on connection test if nay issue is in connection then it will display the error here .might be some rfc DESTINATION is missing or authnetication error .
Regards,
Saurabh

"SOAP:Fault" in scenario with ABAP proxy client

Hello,
I realized the scenario CRM40_Basis620(ABAP proxy client)->XI->File.
XI:
The sender communication channel is a XI adapter (Parameters: HTTP 1.0, XI 3.0, Integration Server, Security profile unchecked, Security level - HTTP).
CRM:
The proxy generation is ok.
SLDCHECK is ok.
All RFC destinations are ok.
APPINT_200_620 for CRM was installed and configured well (I think so, but...).
When I ran the ABAP proxy client on CRM, sxmb_moni(CRM) returned the text for the XML Message (Display-CallIntegrationServer-Payloads-TraceDocument):
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <SAP:TraceHeader xmlns:SAP="http://sap.com/exchange/MessageFormat">
<Trace level="1" type="B" name="CL_XMS_TROUBLESHOOT-ENTER_PLSRV" />
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">XMB entry processing</Trace>
<Trace level="1" type="T">system-ID = EST</Trace>
<Trace level="1" type="T">client = 300</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = BABKIN_RA</Trace>
<Trace level="1" type="Timestamp">2007-08-06T13:55:12Z</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_UC_EXECUTE" />
- 
<Trace level="1" type="T">Message-GUID = DC4424A659314CF18F500002A541D0E7</Trace>
<Trace level="1" type="T">PLNAME = SENDER</Trace>
<Trace level="1" type="T">QOS = EO</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_ASYNC" />
- 
<Trace level="1" type="T">Get definition of external pipeline = SENDER</Trace>
<Trace level="1" type="T">Get definition of internal pipeline = SAP_SENDER</Trace>
<Trace level="1" type="T">Generated prefixed queue name = XBTS0004</Trace>
<Trace level="1" type="T">Setup qRFC Scheduler OK!</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Going to persist message + call qRFC now...</Trace>
<Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
<Trace level="1" type="T">- Exit CALL_PIPELINE_ASYNC</Trace>
<Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE" />
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
- 
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Starting async processing with pipeline SENDER</Trace>
<Trace level="1" type="T">system-ID = EST</Trace>
<Trace level="1" type="T">client = 300</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = BABKIN_RA</Trace>
<Trace level="1" type="Timestamp">2007-08-06T13:55:12Z</Trace>
<Trace level="1" type="T">----
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC">
<Trace level="1" type="T">Get definition of pipeline PID= SENDER</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
- <Trace level="1" type="B" name="PLSRV_CALL_INTEGRATION_SERVER">
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />
- 
- <Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_XMB-ENTER_PLSRV">
<Trace level="1" type="T">URL for integration server read from global configuration</Trace>
<Trace level="1" type="T">URL= http://SRMDEV.oao.sng:8011/sap/xi/engine?type=entry</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-SET_TECHNICAL_ROUTING_PROPERTY" />
- <Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_XMB-CALL_XMS_HTTP">
<Trace level="1" type="System_Error">HTTP-client: error response= <SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/"> <SOAP:Header> </SOAP:Header> <SOAP:Body> <SOAP:Fault xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/"><faultcode>SOAP:Client</faultcode><faultstring>Error during conversion of XI message</faultstring><faultactor>http://sap.com/xi/XI/Message/30</faultactor><detail><SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1"><SAP:Category>XIServer</SAP:Category><SAP:Code area="SECURITY">INBOUND_SECURE_LEVEL</SAP:Code><SAP:P1>DC4424A659314CF18F500002A541D0E7</SAP:P1><SAP:P2/><SAP:P3>HTTP</SAP:P3><SAP:P4/><SAP:AdditionalText/><SAP:ApplicationFaultMessage namespace=""/><SAP:Stack>Message DC4424A659314CF18F500002A541D0E7 was sent with ''. Channel configuration, however, requires 'HTTP' </SAP:Stack></SAP:Error></detail></SOAP:Fault> </SOAP:Body> </SOAP:Envelope></Trace>
</Trace>
<Trace level="1" type="System_Error">Exit XMB because of system error!</Trace>
<Trace level="1" type="System_Error">System-Error: HTTP.HTTP_STATUS_CODE_NEQ_OK</Trace>
<Trace level="1" type="System_Error">HTTP status code 500 : Error during conversion of XI message</Trace>
<Trace level="1" type="B" name="CL_XMS_TROUBLESHOOT-ENTER_PLSRV" />
</SAP:TraceHeader>
I think the main problem is the parameter "HTTP Security level" for the channel, but not sure.
Does anybody know where to find a solution?
Regards,
Roman

Hi Roman
There is no need for an XI adapter for client proxy.... we only use that for server proxies.
Vaibhav

Abap proxy client and https webservice

Hi, I have a problem with an abap proxy client.
This proxy works perfectyl when I call the test webservice (via HTTP protocol) but it does not work if I try to call the productive webservice (via HTTPS protocol). Of course I have configured LPCONFIG in order to let the proxy point to the correct web site.
I'm pretty sure that problkem is caused by different protocols HTTP vs HTTPS.
I thought the problem could be the web site certificate, so I added it into the PSE (transaction STRUST) but nothing happnes.
Your help is really appreciated.
Edited by: robcom69 on Feb 22, 2010 3:34 PM
Edited by: robcom69 on Feb 22, 2010 3:35 PM
Edited by: robcom69 on Feb 22, 2010 3:49 PM

I have loaded the certificate in the TRUST transaction.
Anyway, in our system we do not have the SAPCRIPTOLIB libraries and I do not underastand if they are necessary or not.
I mean, I need these libraries only if I expose an HTTPS server from SAP or even if SAP is the client and it need to access an external https webservice ?
Please help.

Problem: ABAP Proxy Client Sending to XI - Message lost

Hi all,
I got a problem, concerning ABAP Proxy Client.
I have done the following:
1. Created an outbound interface in XI 3.0, sp14
2. Created Proxy for this in ABAP using sproxy
3. Created ABAP pgm to call this proxy
4. Maintained SM59 http destination to XI
(RFC Dest:INTEGRATIONSERVER TYPE H)
5. Sender r/3 system is WAS 640
6. I also did sxmb_adm in Sender System to have Integration Engine URL pointing to XI System.
7. I registered/ activated queues in SXMB_ADM.
8. SICF service is active for defalt/xi/engine in both Sender and target systems.
I allready have ABAP Proxy Server running...
My Proxy Client seems to run.., running my report (based on the ABAP Proxy Client Weblog from SDN)I get a sy-subrc 0 and no error, bot I can't see no message in XI. Neither in SXMB_MONI, nor in RWB checking Message-Monitoring
Can someone please tell me what is going wrong and where I could check for my messages?
Thanks in advance, Daniel

Hi Daniel -
Looks like you've done the major tasks for this to work. A couple of things however...
For proxies, Type H is the correct RFC Dest type. However, don't know if it's a typo, but the 'Dest:INTEGRATIONSERVER' should have '//' like 'Dest://INTEGRATIONSERVER'.
Also, confirm that your are using the correct port in your destination. You should use the integration server's ICM port, not the J2EE server port. You can confirm this in SMICM, then Goto-->Services. You may already have this; I just didn't see it specified in your description.
Regards,
Jin

Is Asynchronous ABAP proxy client possible without XI ?

Hi there,
Does anyone of you know if it is possible to create an asynchronous ABAP proxy client, without XI, thus directly in a SAP ERP 60 ABAP ?
Karim

Hi Anton,
thanks for your answer, it confirmed what I was thinking (asynchronous not possible in that case).
Now this leads me to a second question:
I would like to implement the scenario "acknowledge only and receive full answer later".
As you indicate: "...additionally to your webservice client you have to provide a webservice, which the receiver calls once it completes your request..."
In order to do this, I must practice as follows:
The service I call is using the WS-Addressing specifications.
Therefore, the information regarding the webservice that will be called when the request is completed should be sent as a special SOAP WS-addressing parameter, that should be indicated in the header of the SOAP Message, here is an example:
(001) <S:Envelope xmlns:S="http://www.w3.org/2003/05/soap-envelope"
                xmlns:wsa="http://schemas.xmlsoap.org/ws/2004/08/addressing">
(002)   <S:Header>
(003)    <wsa:MessageID>
(004)      uuid:6B29FC40-CA47-1067-B31D-00DD010662DA
(005)    </wsa:MessageID>
(006)    <wsa:ReplyTo>
(007)      <wsa:Address>http://business456.example/client1</wsa:Address>
(008)    </wsa:ReplyTo>
(009)    <wsa:To>http://fabrikam123.example/Purchasing</wsa:To>
(010)    <wsa:Action>http://fabrikam123.example/SubmitPO</wsa:Action>
(011)   </S:Header>
(012)   <S:Body>
(013)     ...
(014)   </S:Body>
(015) </S:Envelope>
You can see that the WS-A specific part is in the header of the SOAP Message, not in the body, so not covered by the WSDL.
Question: Is it possible to include this in the header of the SOAP Message generated by the ABAP proxy client ???

How can I call a ABAP proxy class from BADI? PLease help

hi Experts,
    I have a scenario where I have to call a ABAP proxy class from a BADI. How can I do this? Does anybody has sample code for the same?
Please help.
Thanks
Gopal

Hi,
   You can call a method of a class from BADI. Here are the steps.
   1) In the BADI implementation create a object for the proxy class.
   2) Call the Execute_Synchronous method.
    You can define a BADI by using SE18 and you can implement it by using SE19.
Sample code...
================================================
METHOD ZIF_EX_VBADI~CONVERTUPPER.
DATA: OBJ TYPE REF TO ZTESTCLASS.
DATA: IT_DATA TYPE ZIN_MT,
            IT_RES   TYPE ZOUT_MT,
            SEXCEPTION TYPE REF TO CX_AI_SYSTEM_FAULT.
TRY.
      CREATE OBJECT OBJ
         EXPORTING
             LOGICAL_PORT_NAME = 'TESTPORT'.
CATCH CX_AI_SYSTEM_FAULT INTO SEXCEPTION.
ENDTRY.
ENDMETHOD.
================================================
Thanks,
Vivek LR

How to call a ABAP proxy class from a BADI? Please help!

hi Experts,
    I have a scenario where I have to call a ABAP proxy class from a BADI. How can I do this? Does anybody has sample code for the same?
Please help.
Thanks
Gopal

Hi Gopal,
Check this out
DATA: ref_obj    TYPE REF TO zmfg_production_ord.----> BADI
* Instantiate the proxy class
    CREATE OBJECT ref_obj.
    TRY.
        CALL METHOD ref_obj->execute_asynchronous
          EXPORTING
            output = it_output.     "Output Structure
        COMMIT WORK.
      CATCH cx_ai_system_fault INTO ref_sysexception.
    ENDTRY.
    IF ref_sysexception IS INITIAL.
      WRITE : / 'Error Message'.
    ENDIF.
Edited by: Raj on May 28, 2008 4:52 PM

ABAP proxy client call PI with new client 120 in old business system

Hi all
We have a requirement to call PI from ABAP client proxy in synchronous mode via a CRM client 120.
CRM client 100 is already configured in the Business system talked above but now we need the same business system to be configured for client 120 as well.
My question is If we go to the SLD and
|-> Click on Business System
|-> Add new client 120
Will it work or we need to do some extra configuration for communication channel.
Also please let me know how to configure Integration Directory for sender agreement, Receiver Agreement and the communication channel.
Thanks in Advance.

Hi Naina ,
We have a requirement to call PI from ABAP client proxy in synchronous mode via a CRM client 120.
CRM client 100 is already configured in the Business system talked above but now we need the same business system to be configured for client 120 as well.
My question is If we go to the SLD and
|-> Click on Business System
|-> Add new client 120
> hope the technical entry of CRM is already in SLD . So you just need to make a business system entry . point the business sytem to the technical system entry with the right client here 120 .
Will it work or we need to do some extra configuration for communication channel.
> since sender is client proxy you don't need to do anything in case of receiver proxy you will be needing reciver communication channel of XI adapter type .
for proxy based communication your application system(other than PI/XI) should be able to make a proxy call to XI or receive a call from XI .for this purpose you need to make some settings at R/3( or CRM level)
For this check blog : /people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
Abap proxies ( Client and Server proxies)
Other steps i.e Interface determination/receiver determination are as usual .
Regards ,

ABAP proxy client sending to XI by using the WEB Service

Hi
I have scenario where ABAP Proxy need to send the data by calling a web service middleware as SAP XI/PI,
Can anyone please provide the details of the scenarion that ABAP Proxy calls the webservice to send the data and receive it back the response, (Synchronous communication)
Thanks
PR

Hi PR
My understanding of your requirement is like
Proxy <-> XI <-> SOAP.
Steps.
1. Create Client proxy to send data to XI
2. Import the WSDL provided by receiver system in XI
3. Do IR steps
4. ID - SA is not required
5. Configure Receiver SOAP adapter using the URL and Soap Action from the WSDL you received.
Thanks
Gaurav

Send message with abap proxy client

I'm trying to send message to XI, but no message in sxmb_moni.
I have created logical port with LPCONFIG.
ABAP code
REPORT Z_HTTP_SEND.
DATA:
* Reference variables for proxy and exception class
lo_clientProxy     TYPE REF TO ZPCO_MI_COMPANY_OB,
lo_sys_exception   TYPE REF TO cx_ai_system_fault,
* Structures to set and get message content
   ls_request         TYPE ZPMT_COMPANY_ID,
   ls_response        TYPE ZPMT_COMPANY_DETAILS.
*Complete the structure ls_request for the request message.
*DATA: zmt_id type ZPMT_COMPANY_ID,
*zdt_id type ZPDT_COMPANY_ID,
*z_id_tab type ZPCOMPANY_ID_TAB,
*z_id type ZPCOMPANY_ID.
*z_id-COMPANY_ID = '3000'.
*append z_id to z_id_tab.
* zdt_id-RECORD = z_id_tab.
*zmt_id-MT_COMPANY_ID = zdt_id.
DATA tab TYPE ZPCOMPANY_ID_TAB WITH HEADER LINE.
tab-COMPANY_ID = '3000'.
APPEND tab.
ls_request-MT_COMPANY_ID-RECORD = tab[].
TRY.
* create proxy client
*CREATE OBJECT lo_clientProxy( u2018LOGICAL_PORT_NAMEu2019 ).
    CREATE OBJECT lo_clientProxy.
* do synchronous client proxy call
    CALL METHOD lo_clientProxy->execute_synchronous
             EXPORTING output = ls_request
             IMPORTING input   = ls_response.
    CATCH cx_ai_system_fault INTO lo_sys_exception.
*   Error handling
ENDTRY.
Any ideas? Thanks very much,

Hi,
Proxies communicate with the XI server by means of native SOAP calls over HTTP .RFC does not, so you have to convert from SOAP to RFC calls and vice versa. So XML conversion is required.
ABAP Proxies uses Webservice and Http Protocols. And if you use RFC it is mainly meant for Sync. call. But Proxies is used for both Sync and Async.
If you use ABAP Proxy , you can reduce the overhead calling the function again and again.
How do you activate ABAP Proxies? - Activate Proxy
ABAP Server Proxies - ABAP Server Proxy
ABAP Proxies in XI(Client Proxy) - ABAP Client Proxy
Re: JDBC Sender select/update problem
If u generate proxy for outbound interface then its client proxy and for inbound interface its server proxy.
In client proxy u can call the method to send messages but u can't modify it but in server proxy its possible to write a user code within the method to execute proxy.
CLIENT PROXY:
A WSDL description from a UDDI server (or an Internet page) is usually used to make a service executable in the Internet and to describe the interface of this service. You require a client proxy and not a server proxy to call this service by using the Web service infrastructure.
SERVER PROXY:
You can only generate ABAP server proxies from a WSDL description if they originate in the Integration Repository.You can also generate server proxies for Java and client proxies for ABAP from message interfaces.
s refer these doc about ABAP proxy ..
How do you activate ABAP Proxies? - Activate Proxy
ABAP Server Proxies - ABAP Server Proxy
ABAP Proxies in XI(Client Proxy) - ABAP Client Proxy
Re: JDBC Sender select/update problem
ABAP Server Proxies
How do you activate ABAP Proxies?
ABAP Proxies in XI(Client Proxy)
File to R/3 via ABAP Proxy
http://help.sap.com/saphelp_nw2004s/helpdata/en/48/d5a1fe5f317a4e8e35801ed2c88246/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/ba/f21a403233dd5fe10000000a155106/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/41e08c90-0201-0010-9197-d8774336ea78
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f0ae9874-109c-2910-f48a-e91f0cdd1c81
Smarter Approach for coding ABAP Proxies
regards,
Surya

ABAP Proxy Client how to get the XML

Hi all,
I have created a Proxy Client by SE80 using the WSDL file, I no have any middleware as PI etc.
Testing it I'm facing with an error occurred on the server side. So the developers asked me to send them the full XML message with whom I call the service.
From se80 I can see only the body of the request I guess.
So I'm tring to understend where I can get the whole XML.
Any help will be appreciated.
Thank you,
Pasquale.

I'm not an ABAP programmer.
If I have to test a webservice, provided by sap system or other system, I always use soapui from www.soapui.org
In soapui
* create new soap project
* point to wsdl file
This will automatically create a sample xml request message for the webservice.
You can edit the request message and put in the values you want.
If required, fill user credentials into the request properties.
Then send the request message.
You will get the xml response message.
If the service works fine with soapui, then the problem is at your side (abap proxy, apap code behind the proxy).
If you can reproduce the error with soapui, then the problem is at the side of the service provider.
I don't have permission for SPROXY at our sap backends. Perhaps there is a "test interface" function, which shows the xml messages.

Bapi call in abap proxy reaching dialog timeout in async scenario

Hi all,
We have an XI interface to create sales orders. Legacy app sends a soap message async to XI with a group of orders. XI sends this group of orders to an Abap proxy async on ECC side. Into this Abap proxy we have a loop to process each order received in the group with BAPI_SALESORDER_CREATEFROMDAT2. Ending the loop, abap proxy start another async process to send the response to XI with an outbound abap proxy, and the response is redirected by XI to Legacy app.
The problem is, this group of orders can have two or two thousand orders... so, the async process guarantee that no timeout limit will be reached. This is working for the whole process. But when this BAPI is creating an order, the time out of BAPIs execution seems to be the same as the timeout of dialog processes (now set to 10 minutes). This is our problem. Some orders spend more than 10 minutes to process (orders with five hundreds items, for example)... when this occurs, BAPI throws a time out reached error and the async process stops on the inbound queue with status sysfail.
We are now trying to understand why this timeout is been triggered by the BAPI. As it is running into an Async process, it should execute without any kind of timeout limits...
If anybody has any idea, please, help us.
Thank you.
regards.
roberti

May be I was not so clear... the total spent time in the process can be many many hours, days, etc... no timeout is reached. I can post 10.000 orders, no timeout is reached. The problem is that if the processing of only one order with BAPI_SALESORDER_CREATEFROMDAT2 takes longer than 10 minutes, then the timeout is reached. This is the strange part. The processing of the bapi seems to get the same timeout of dialog processes, we already tested increasing the dialog process timeout and the timeout of bapi execution was the same...
We already monitor on SE66 to see if it opens a dialog process to execute the bapi call function, but it does not.
If anyone has any tip, please, provide us.
Thanks!
roberti

ABAP proxy client sending to XI

We have created an outbound interface in XI and generated the proxy in ABAP using SPROXY. When we test the call of the proxy, we get the following error in SXMB_MONI..
HTTP response contains status code 401 with the description Unauthorized
Any advice on how to troubleshoot and resolve would be appreciated.

Thanks for all the suggestions, I have checked most of what has been suggested (SM59 HTTP, SXMB_ADM Int Eng Cnf, SLDCHECK, and SPROXY Connection Test) and these appear ok.
I can provide further info that may help...
In SXMB_MONI there appear to be two high level steps involved in the processing. The first is "Inbound Message (SENDER)" which has a green flag. The next is "Call Integration Server", which has a Red flag. When I look at the Trace section of the SOAP Header IT is giving the following information..
Anmeldung fehlgeschlagen
Was ist passiert ?
Der Aufruf der URL http://acadnt12:8000/sap/xi/engine wurde aufgrund fehlerhafter Anmeldedaten abgebrochen.
Hinweis
Die Anmeldung wurde im System E60 ausgef?Hierbei wurden keine Anmeldedaten bereitgestellt.
Was k?n Sie tun ?
Falls Sie noch ?eine Benutzerkennung verf?so wenden Sie sich an Ihren Systemadministrator.
Fehlercode: ICF-LE-http-c:800-l:-T:-C:6-U:-P:-L:6
HTTP 401 - Unauthorized
Ihr SAP Internet Communication Framework Team
Which I was able to roughly translate to...
Registration missed What happened? The call of the URL http://acadnt12:8000/sap/xi/engine was broken off due to incorrect dates of registration. Reference The registration became in the system E60 ausgef? Here no dates of registration were made available. Which k? n you do? If it still? a user identification verf? thus you turn to your system administrator. Error code: ICF LE HTTP C: 800-l: - T: - C: 6-U: - P: - L: 6 HTTP 401 - Unauthorized Its SAP Internet Communication Framework team

ABAP Proxy Client?

Hi Experts,
i've gone thru a ABAP Client Proxy scenario which is mention below.
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
can anyone elaborate abt this scenario?
i want to know proxy will be generated on XI or on the sender system. if we are creating proxy on XI then how XI message format i.e., (SOAP XML message) is generated and Message interface which is created for Sender will b mapped?
Cheers
Faisal

Hi Faisal,
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
Proxy is created on application system .in this example they have taken two clients of XI system. client 100 is configured as XI integration server and client 105 is configuired as sap application system.client 105 is working as Sender system.Actually we can have only one XI integration server on any NW system but we can have various application systems.
For client proxy creation , we first create outbound mesage interfaces in IR and then we go to SPROXY transaction and chose our outbound message interface and create proxy from that interface.
u create a abap report and send message from there.
use these links:
ABAP Proxy Generation
http://help.sap.com/saphelp_nw04/helpdata/en/ba/f21a403233dd5fe10000000a155106/content.htm
ABAP Proxy Generation
http://help.sap.com/saphelp_nw04/helpdata/en/14/555f3c482a7331e10000000a114084/content.htm
Proxy Generation
http://help.sap.com/saphelp_nw04/helpdata/en/86/58cd3b11571962e10000000a11402f/content.htm
ABAP Proxy Runtime
http://help.sap.com/saphelp_nw04/helpdata/en/02/265c3cf311070ae10000000a114084/content.htm
To activate ABAP proxies
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
Detailed step-by-step solution for ABAP proxies in XI
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
ABAP Server proxies
/people/siva.maranani/blog/2005/04/03/abap-server-proxies
Debugging of Inbound ABAP proxies
/people/stefan.grube/blog/2006/07/28/xi-debug-your-inbound-abap-proxy-implementation
File to R/3 via ABAP Proxy
/people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy
Cheers
Rohit
please reward points if found useful....it would be appreciable...:)
Edited by: Rohit Goel on Jan 30, 2008 7:45 AM

Double call of abap proxy client

Similar Messages

Maybe you are looking for