Doubt in File to idoc scenario

Hi All,
My scenario is to post the Customer Master Idoc in R/3 from file.
XI configuration has done and R/3 settings were made and i am able to see the idoc in R/3 but it is with error saying that "Account group in the IDoc is different". Kindly suggest me whether is there any problem in xi settings or not. Kindly provide some solution for this and comment some thing on this error, and list some possibilities where we can get this sort of error.
Please look at the mapping :
/DEBMAS06/IDOC/@BEGIN=const([value=1]) /DEBMAS06/IDOC/EDI_DC40/@SEGMENT=const([value=1]) /DEBMAS06/IDOC/EDI_DC40/TABNAM=const([value=EDIDC]) /DEBMAS06/IDOC/EDI_DC40/DIRECT=const([value=2]) /DEBMAS06/IDOC/EDI_DC40/IDOCTYP=const([value=DEBMAS06]) /DEBMAS06/IDOC/EDI_DC40/MESTYP=const([value=DEBMAS]) /DEBMAS06/IDOC/EDI_DC40/SNDPOR=const([value=SAPPED]) /DEBMAS06/IDOC/EDI_DC40/SNDPRT=const([value=LS]) /DEBMAS06/IDOC/EDI_DC40/SNDPRN=const([value=EICLNT100]) /DEBMAS06/IDOC/EDI_DC40/RCVPOR=const([value=SAPECC]) /DEBMAS06/IDOC/EDI_DC40/RCVPRN=const([value=R3CLNT800]) /DEBMAS06/IDOC/E1KNA1M=/ns0:Dell_Mt_Ob= /DEBMAS06/IDOC/E1KNA1M/@SEGMENT=const([value=1]) /DEBMAS06/IDOC/E1KNA1M/MSGFN=/ns0:Dell_Mt_Ob/MSGFN= /DEBMAS06/IDOC/E1KNA1M/ANRED=/ns0:Dell_Mt_Ob/Anred= /DEBMAS06/IDOC/E1KNA1M/KTOKD=/ns0:Dell_Mt_Ob/ktokd= /DEBMAS06/IDOC/E1KNA1M/LAND1=/ns0:Dell_Mt_Ob/Land1= /DEBMAS06/IDOC/E1KNA1M/NAME1=/ns0:Dell_Mt_Ob/Name1= /DEBMAS06/IDOC/E1KNA1M/ORT01=/ns0:Dell_Mt_Ob/Ort01= /DEBMAS06/IDOC/E1KNA1M/SORTL=/ns0:Dell_Mt_Ob/Sortl= /DEBMAS06/IDOC/E1KNA1M/SPRAS=/ns0:Dell_Mt_Ob/SPRAS= /DEBMAS06/IDOC/E1KNA1M/LZONE=/ns0:Dell_Mt_Ob/Lzone
And one more doubt, how the source file structure should look :
I have created a Data structure Dell_Dt_Ob under that i have taken 9 fields. and the message type is Dell_Mt_Ob. i have mapped Dell_Mt_Ob to segment E1KNA1M. But there is no mapping for DEBMAS06, IDOC, EDI_DC40. Kindly suggest me whether the strucutre which i have created is correct or wrong.
Thanks in advance.
Regards,
Prem.S

Hi Prem,
Try updating the same record in R/3 Directly. If you getting the same error then its a problem with the record that you entered..
Thanks
Anju

Similar Messages

Doubt in file 2 idoc scenario

hi,
I am trying to execute to file 2 idoc scenario.
I created DT,MT for XML file outbound system.
After importing idoc
how can i create DT, MT for idoc to connect oubound DT,MT (file side)?
I am following this wiki guide
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/11/fileToIDOC&

hi Raj,
It means in Idoc, for each field Mesage type, data type are defined, no need to create to once again here in XI.
plz if i understood wrongly means correct me.
ONE MORE THING
i imported cremas04 idoc,
in that EDI_DC40 contains control record
E1LFA1M contain data record
is it correct?

Doubt in fields - message mapping (file 2 idoc scenario)

while doing message mapping in file 2 idoc scenario, i could not able find the values for some field names
( i am following this wiki help
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/11/fileToIDOC& )
cremas04 idoc
vendorNo LIFNR
vendor name Name1
Pur_org ? ( I could not able locate field with the similar desc in idoc MT side)
Company code ?
Acc_Grp ?
Search term MCOD1
Address ADRNR
City ORT01
Pin_code PSLTZ
could you help me out with this?
Message was edited by: praba
praba

hi,
I got the answer.

Where to define third party logical system name in file to idoc scenario

Hi Friends,
I am shalini shah.
I have one doubt, where I can define the logical system name in File to Idoc scenario.
I created Logical system for R/3 system in SALE t.code, but where to define the Third party logical system ,
In SALE or any where.
Please give me solution.
Warm Regards,
Shalini Shah

Hi Shalini,
You need to create Business system in SLD and import the business system in ID.Then u will start with the configuration.
Just refer the below link for configurations with step by step solution.
File To IDOC - Part1 (SLD and Design):
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/11/fileToIDOC&
File To IDOC - Part2 (Configuration):
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/11/fileToIDOC-Part2+(Configuration)&
File To IDOC - Part3 (Steps required in XI and R3):
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/11/fileToIDOC-Part3(StepsrequiredinXIandR3)&
Thnx
Chirag

File to Idoc Scenario. Pls advice

Hi All,
I have implemented File to Idoc Scenario and it worked fine.
I have 2 doubts:
My Scenario: File -- XI -- R/3 system named D01
1. In Configuration: In Receiver Aggrement why we put
    XI Business System name in Sender Service?
2. In Configuration when I open my R/3 Business system
    (D01CLNT100) and click on Adapter Specfic Identifiers I can
    see my Logical System Name as D01CLNT100.
    When I use SALE tx. in D01 R/3 system I can see
    D01CLNT100 as logical system
    Question: If I use SALE transaction and change my
    logical system name to "test" , do I need to change the
    name "test" in SLD and then for R/3 Business system
    (D01CLNT100) in Adapter Specfic Identifiers I will see new
     Logical System Name as test.
Regards

Hi,
Question: If I use SALE transaction and change my logical system name to "test" , do I need to change the name "test" in SLD and then for R/3 Business system (D01CLNT100) in Adapter Specfic Identifiers I will see new Logical System Name as test
Yes , you need to Update the name in SLD and just Do SLD Data Cache in ID-- Environment to reflect the same name in Identifiers place.
>>1. In Configuration: In Receiver Aggrement why we put XI Business System name in Sender Service?
You might have used XI as Sender and you might have placed the file in XI Server to pickup.
Thats why you are using Xi's Business System name as Sender Serveice.
Regards
Seshagiri

Regarding File to Idoc Scenario

Dear Friends,
I am performing File to Idoc Scenario in XI 3.0. Here I got struck, I am not able to see my sender file in SXMB_IFR. It is saying that no messages availabe for selection. The file was picked up successfully from the souce. Please help me.
Thanks in advance.

check the error/ warning message that would be available at the end of the page (in RWB....where you see th yellow triangle)......even my IE is showing a yellow triangle but none of my interfaces are facing a problem.....just check for the status of the Communication channel in AE.....since your message is not transferred to SXMB_MONI confirm that the channel log is showing successful.....also can you tell what is teh status of other interfaces?.....are they running fine?...if yes then there seems to be problem with the sender channel......are you using any FCC?
One such situation where IE is showing yellow status is mentioned here: RWB Integration Engine status yellow
Just one doubt to ask...are you using the required Sender channel in the Sender Agreement?...hope there is no mismatch here....
Regards,
Abhishek.
Edited by: abhishek salvi on Jul 14, 2009 11:38 AM

XI 3 File to IDoc scenario - Still referencing Old Logical system

Hi
Dont know if you can help. I have a file to idoc scenario using XI 3 to R/3 4.6c system.
I had the interface working from a third party system XMLHUB to SAP R/3. The Logical system name for the XMLHUB was XMLHUB01 in the SLD which I have set up as a partner profile in R/3. I have recently changed the logical system name to XMLHUBDEV01 in the SLD and created that logical system in R/3 and changed the partner profile to XMLHUBDEV01.
Unfortunately in the sender information of the IDoc the partner number is still XMLHUB01 and not XMLHUBDEV01. I don't understand where this partner is sent from to get into the control record of the IDoc.
I have cleared the SLD cache in both the Repository and the directory. Is there somewhere else I should be looking? Any help would be appreciated.
Regards
Daniel

hi daniel...
this thread wud answer ur query....
Re: IDOC Payload
regards..
vishal

Message has error status at outbound side File To Idoc Scenario

hi ,
In my File to Idoc scenario , when i go to sxmb_moni , i found that its showing red flag at Outbound Status Tab and showing message "Message has error status at outbound side".
When i go to IDX5 and and select my idoc and click on Transaction Id it shows "Password logon no longer possible - too many faile" .
Please suggest what may be the problem ?
Regards,
Rohit

1. First check the RFC destination name used in receiver Idoc adapter communication channel.
2. As i said earlier, in sm59 transaction in XI gui, u can check same rfc destination under type 3. There check the logon credentials and the username.
3. Now goto the R3 system GUI and check in su01 that same user is locked or not. If locked unlock it.
4. And if u change the password of that user, then do the similar change in XI -> sm59 -> rfc destination logon credential
Regards,
Prateek

Error in File to IDOC Scenario

Hi,
I have File to IDOC scenario.
I am getting error in sender file channel.
"Conversion initialization failed: java.lang.Exception: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found: Mandatory parameter 'xml.keyfieldName': no value found "
Although I have used this parameter in content conversion 'xml.keyfieldName' (for each sub structure and defined a key field).
Despite of this error in sender channel I am receiving the message in XI.
But in XI also it throws error :
"Unable to convert the sender service PG_TOM_CEEMEA_RU_SFA to an ALE logical system"
Any help on this ?
Thanks,
Vikas

Hello Vikas,
I am getting error in sender file channel.
"Conversion initialization failed: java.lang.Exception: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found: Mandatory parameter 'xml.keyfieldName': no value found "
Although I have used this parameter in content conversion 'xml.keyfieldName' (for each sub structure and defined a key field).
Check your flat file structure whether the key field you have chosen is appropriate and also recheck the FCC details whether you have assigned the value for the key field i.e. keyFieldValue.
"Unable to convert the sender service PG_TOM_CEEMEA_RU_SFA to an ALE logical system"
regarding the above error refer this
https://wiki.sdn.sap.com/wiki/display/XI/Unable%20to%20convert%20Sender%20system%20to%20ALE%20logical%20system
Regards,
Prasanna

Error while doing a File to IDOC scenario

Hi Experts,
I have created a File to IDOC scenario where in i have sent a file which has to pass data to ABSEN1 IDOC.I could see the IDOC reaching R/3 ,but with the status 56: "EDI: Partner profile inbound not available"
I have checked with all the configurations and couldnt find where it went wrong.
Kindly help me in this regard.
Thanks.

Hi
Check the inbound parameter and the process code.
To find Process code for IDoc use Tcode WE42.
ALE idoc trouble shooting use
Troubleshooting of ALE Process
look also this configuration
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6bd6f69a-0701-0010-a88b-adbb6ee89b34

How to handle the control records in case of file to idoc scenario.

Hi All,
can you please clarify me how to handle the control records in case of file to idoc scenario.

Hi,
In File to Idoc scenario even though you selected apply control record values from payload and you are not getting those correct values which you have provided in the mapping.
Also check the checkboxes Take sender from payload and Take receiver from payload along with the Apply control record values from payload checkbox
Regards
Seshagiri

About FILE to IDOC scenario

Hi Experts,
i need some help for doing file to idoc scenario.
1. what are the configurations we must do while doing this scenario?
2. How to communicate with Legacy system to sap system?
3. How to create the business and logical systems for SAP systems in SLD?
4. How to define parameters in communcation in ID?
5. what work shold be done using SM59 and WE20? and specify the steps please?
6. finally if u having word file please send from the creation of logical system for sap system?
thanx.

Go thru below mentioned links.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/73527b2c-0501-0010-5398-c4ac372c9692
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6bd6f69a-0701-0010-a88b-adbb6ee89b34
once you go thru them you will find answers for questions.
thanks,
Venkat

File to IDOC scenario-no messages in SXMB_MONI

Hi all,
   I know this is asked so many times ,I checked some links but couldn;t find out the gap where it happened.
I am doing a File to IDOC scenario through XI mapping.
I am not getting any messages in SXMB_MONI.
When I check Communication Channel monitering in Runtime Workbench, it shows processing successfully, then it should generate messages in SXMB_MONI and intimate whether the scenario created is correct or not right!
Please help.
My scenario goes like this:
Sender : Business service(Some file location)
Used File adapter for sender communication channnel.
Receiver : Business system(SAP R/3)
Used IDOC Adapter for receiver communication channel.
One more thing is,do I need to create logical system for Business service also?If so, where do I maintain it?(In SAP R/3 or in XI system?)
Till now,I maintained my XI system as logical system in WE20 and I didn't create any logical system for business service in any system.Does it create main problem?

Hi , I am able to poll the files from file location now.and I am receiving IDOC into SAP R/3 with status 56.I already created partner for file path as a logical system and assigned inbound parameters with respective message type . Even the status shows :
An inbound partner profile could not be found with the following key:
/LSDEMO/LS//DEBMAS////
This involves the key fields of table EDP21:
-SNDPRN partner number of sender
-SNDPRT partner type of sender
-SNDPFC partner function of sender
-MESTYP logical message type
-MESCOD logical message code
-MESFCT logical message function
-TEST    test flag
I already manitained following data and there is one record in EDP21.
SNDPRN = LSDEMO
SNDPRT = LS
SNDPFC = LS
MESTYP   = DEBMAS
MESCOD = space
MESFCT = space
TEST = space
EVCODE   = DEBM
SYNCHK = X
METHOD = space
USRTYP = space
USRLNG = space
INMOD = space
DCART = space
And please let me know whether I have to maintain outbound parameters also for my partner in XI system.I didn't see any difference even I maintained it.
And my IDOC takes another port rather than I mentioned in my SNDPRN(sender port) of my IDOC control record in message mapping.Let me know whether it's mandatory to maintain port name with SAP<XXX>convension,because IDOC in R/3 is picking the port with that naming convension.
Edited by: Jaya on Feb 26, 2010 10:17 AM
Edited by: Jaya on Feb 26, 2010 10:27 AM

Reg:file to idoc scenario

In a file-xi-idoc scenario i created a business service for legacy
system and a business system for R/3 receiver system
i didn't assign logical system for the sender business service
and assigned a logical system for the reciver business system
so while maintaining partner profile in the R/3 system
i have to give partner no:
partner type:
here the problem is my sender business service i didn't assign any logical system,and it is not of LS type
so then what do i need to give in the above two fields?
answers required briefly

Hello,
you know this pdf:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c09b775e-e56e-2910-1187-d8eba09c7a4a
Could be helpful.
Regards
Patrick

Partner Profile for file to IDOC scenario

Hi experts,
I am doing file to Idoc scenario. I did the ALE configuration steps between XI and r/3. For sender (ThirdParty) system, I defined Business system. While defining partner profiles in WE20 I got confused, whether to Give XI logical system Name or Third party logical system name. Please clarify..........
Thanks
Manoj

Hi,
>>I defined Business system. While defining partner profiles in WE20 I got confused, whether to Give XI logical system Name or Third party logical system name. Please clarify..........
in most cases you will only use one logical system in WE20
this will be XI's logical system - and you can route all the traffic
via this logicail system - this is the most popular case
for more about IDOCs and XI have a look at my book:
Mastering IDoc Business Scenarios with the SAP XI
http://www.sap-press.com/product.cfm?account=&product=H1935
Regards,
Michal Krawczyk
http://mypigenie.com - XI/PI FAQ

Doubt in File to idoc scenario

Similar Messages

Maybe you are looking for