Doubt on Depreciation in Fixed Assets Module

Dear Members,
When we run depreciation we have an option to select the "Close Period" check box and Oracle Standard user guide says that "Depreciation can be run as many times as needed in the current period as long as it is not closed".
Now when we run depreciation by selecting the check box "Close Period" we can see the amount depreciated for the assets in the period.
Navigation we use to see the amount depreciated for the period is:
Fixed Assets Super User-->Inquiry-->Financial Information-->Books(B)
But if we run the depreciation without selecting the check box "Close Period" we cannot see the amount depreciated for the assets in the period.
Can any one explain us what is the reason?
If user wants to see the depreciation amount for certain assets before closing the period then where he can see the amount?
Thanks in advance for your valuable replies.
Best Regards

Hello,
Steps:
a) Are you querying the Correct Asset?
b) Are you querying the Correct Asset Book?
If you have added a new assets in the same period and run the depreciation without checking the checkbox then the system will calculate the deprecation.
Please reply what is the question you need to ask
What is the actual problem r u facing.
Srikanth

Similar Messages

  • Tax depreciation for fixed asset in Singapore

    Dear all,
    One of our client in Singapore want to run tax depreciation in fixed asset module as below .       
    They want to run depreciation with stright line method pro rata by the year of useful life      
    and the depreciation will be posted only once a year at the first period of the year that acqusition.      
    (No matter when they acqusition the asset)     
    For example : if they do acqusition an asset = 300,000  S$  on any date in year 2009 with useful life 5 years,      
    the depreciation should be posted as below:       
    Depreciation per year = 300,000/5  = 60,000      
    31-Jan-09     Depreciation should be posted = 60,000
    31-Jan-10     Depreciation should be posted = 60,000
    31-Jan-11     Depreciation should be posted = 60,000
    31-Jan-12     Depreciation should be posted = 60,000
    31-Jan-13     Depreciation should be posted = 60,000
    How shuold I can do the configuration for this requirement ?    Please kindly advise.
    Mary_K

    Hi Mary,
    I'm from Singapore. Here's how you will configure the system.
    Create a dep area for Tax depreciation. You should create new Period Control Method (AFAMP) where you will assign 06 period control to acq, add, ret, trn. 06 means start of the fiscal year.
    After that, you create a "Dep Key" to assign this period control method. Then in the dep area per asset class, assign this dep key to the tax dep area.
    The system will default the start of dep for tax the start of the fiscal year regardless of when it was acquired within the FY.

  • Accounting entries process in Fixed Asset Module

    Dear all,
    I don't know Accounting entries process in Fixed Asset Module. I don't know how to post accounting entries and manage fixed assets
    Anyone can share me documents that is relevant to business transaction in  fixed asset module.
    My ID: [email protected]
    Thank in advance
    Minh
    Edited by: Tran Binh Minh on Apr 21, 2008 5:04 AM

    Hi,
    Good Morning,
    We are using Oracle R 12 Version 12.1.3
    and the issue i m facing Corporate Book as we have not yet started Tax Book
    The Addition posted period is closed, but I want to change life in Open Period Mar 12 ( latest open period).
    Yes Depreciation Run for March 12.
    Please help
    Regards
    Anant Danve
    9820077180

  • Multiple depreceation areas in Fixed asset module

    Hi All
    My customer wishes to implement the fixed asset module and is currently running three separate books in his asset register.
    Each asset has a separate net book value for each book (i.e. depreciation area) since they are depreciated at different rates.
    Now i need to upload all the fixed assets but need to upload the three different net book values per asset based on the depreciation area selected - but cant seem to find a way to do this.
    If i create a new asset and then depreciate it, SAP shows the different net book values - so the system obviously supports the process. But how can i put in the assets?
    Any assistance would be appreciated.
    Thanks
    Wendy

    Hi,
    Good Morning,
    We are using Oracle R 12 Version 12.1.3
    and the issue i m facing Corporate Book as we have not yet started Tax Book
    The Addition posted period is closed, but I want to change life in Open Period Mar 12 ( latest open period).
    Yes Depreciation Run for March 12.
    Please help
    Regards
    Anant Danve
    9820077180

  • Leasing facility on Fixed Assets Module

    Hi All,
    We are planning to use the leasing facility available on the Fixed Assets module. The cleint raised the question whether they can upload a file with all the leasing details.
    Therefore I just want to know whether there is an open interface or an API avaliable for uploading lease details on the fixed assets module.
    We are implementing R12.1.3
    Thanks and Regards,
    MPH

    Hello,
    Steps:
    a) Are you querying the Correct Asset?
    b) Are you querying the Correct Asset Book?
    If you have added a new assets in the same period and run the depreciation without checking the checkbox then the system will calculate the deprecation.
    Please reply what is the question you need to ask
    What is the actual problem r u facing.
    Srikanth

  • I want to check/see the total quantity of items from fixed asset module

    Dear All,
    When I create purchase requisitions or purchase order, at the time of selection of items (Printer etc)…
    I want to check/see the total quantity of items from fixed asset module.
    Please guide, me how can I see the total items are available in fixed assets, on purchase order
    Product Detail
    Database Server
    RDBMS : 10.2.0.5.0
    Oracle Applications : 11.5.10.2
    Machine : ofadb.thecityschool.edu.pk
    User : APPS
    Oracle SID : PROD
    System Date : 16-APR-2012 13:27:37
    Database Server PID : 13485
    Session SID : 1437
    SERIAL# : 12175
    AUDSID : 32767692
    Database CPU Usage (in secs) : 0.69
    Regards

    Oracle does not offer this functionality.
    You will have to write a personalization that will query FA based on the item and display the message to the user.
    To invoke this personalization, the user may have to go to tools > show FA. This Show FA is a new option you create by personalization.
    Sandeep Gandhi

  • Is it possible to RESET Fixed Asset Module to the first day we installed it

    Hi All,
    We setup our Fixed Assets module months ago and now realised that we need to have a clean FA Module, so that we can restructure it the way we need. (New categories, new assets, etc.)
    I was wondering if there is a concurrent program or another kind of program to basically RESET the FA (Like resetting it to default).
    I know, this sounds something almost impossible, but I would appreciate any kind of help.
    Thanks,
    Sinan Topuz

    Is there any way to cancle previous apple ID and create a new apple ID. Please help

  • Integration with EBS HR & Fixed Asset module

    Let me know the integration possibilities between:
    a) Oracle's EBS's HRMS module and Workforce Planning
    b) Oracle's EBS's Fixed Assets module and Workforce Capex Planning
    c) Oracle's EBS's AP module and Financial Planning

    I am assuming you are implementing Hyperion Workforce/Capex out of the box, right?
    In either case (out of the box/custom)... you have (at least) options.
    1) Export a flat file from the EBS HRMS/Fixed Asset system and load via FDM.
    2) Have FDM connect (via an FDM script) to the EBS HRMS/Fixed Asset database system and pull the correct data needed. This option is assuming you know the HRMS/Fixed Asset database table structure.
    I know this is a FDM forum but another option is Oracle Data Integrator (ODI).

  • How to relate the Fixed Asset module to Purchase Order?

    Hello experts,
    Good day!
    How can I relate the fixed assets to purchase order? Is there a ways, so that we can't create different item code for purchase cycle and fixed asset module...
    2nd, how to Increase the net  value of fixed assets ( vehicle, machines) without affecting Profit and Loss? what is the SAP process to do this? Please help me on this..
    Thanks,
    Mari

    Hi Mari,
    First I suggest you add a lot more info. Are you doing this in Crsytal Report Designer or are you referring to one of the SAP applications? If an SAP app then please mark this case as answered and post your question to the SAP forums.
    If you are using Crystal Reports then need more info like the version and what those tables are and if you can use a common link?
    Thank you
    Don

  • How can I use XL report to extract data in Fixed Assets module?

    Can user use XL Reporter to develop reports on Fixed Assets data such as FA Master Data? In another word, can XL
    Reporter be used on FA module? If so, how can this be done?

    Hi
    As there is no reports available for Fixed Asset Module, u have to develop by taking tech help.
    Or else u can use crystal reporter instead.
    Regards,
    Kashi

  • What is Security by FA Book in Fixed Assets Module

    Hi,
    Could anyone explain the concepts on 'Security by FA Book in Fixed Assets'
    In my opinion,,
    'Security by Book is the model that allows organization security in Fixed Asset module'.
    To achieve this, do we need any setup to do.
    Anyone can help me?
    I am in the middile of the project.
    They have one BG and two operating units, and they want one user should not enter the asset in other operating unit.
    Pls help
    Srikanth
    Edited by: user8691386 on Aug 13, 2009 4:47 PM

    Hi Srikanth
    Security Book to Restrict Employees to restrict Using of Books. Security Profile Option can be Assigned at User Level or Responsability Level so People can use only respective book.
    Regards
    Guhanadh
    Edited by: Guhanadh on Aug 15, 2009 10:20 AM

  • Depreciation Posted in Asset Module but not in GL

    Hi,
    In one of the assets, falling under the 'Assets Under Construction' by mistake the users defined the depreciation key. Accordingly there was an error while running the depreciation. However, after amending the assets master and removing the depreciation key, the depreciation was again conducted. But this time, the depreciation for the month appears to get posted in the Asset Module, without there being any entry in GL Account. When we look at the asset balances report with posted depreciation, we find the depreciation in this asset. Since there is no Accum Dep account for the AUC, the system is not allowing to carry out the Book Depreciation.
    The question is how can we remove the depreciation from the asset module only, without affecting the GAL?
    Thanks in advance for the assistance.

    Hi Rajjul,
    you mix up things. First of all the changes will not have any effect as long as your RESTART run has not been executed successful. The RESTART will only pick up the postings (on FI-AA side) which have been created in the original run. If there have been values to be posted for an asset, it must be posted.
    Therefor you have to change configuration now, store accounts for the Auc class and post the depreciation. First when this run finished successful, and you execute a REPEAT run, the system will catch up depreciation back to zero.
    A RESTART run will never calculate the depreciation value to be posted new, it always takes to amount calculated to be posted from its original run.
    Markus

  • [B1-V9] Cancel automatic depreciation run/Fixed Assets

    Dear Expert,
    Could you please let'us know how to cancel automatic depreciation in fixed assets
    Depereciation : Depreciation run
    Possibility to cancel capitalization: yes
    Version: 9 , PL:09
    Thank you for your feedback
    Kind regards,
    Med

    Hi
    Below is the SAP Note for Cancel Depreciation. 
    1974682 - Posted Depreciation is cleared after Captalization is canceled
    Symptom
    Posted Depreciation in Fixed Asset Master Data ->Depreciation tab is cleared after Captalization is canceled.
    Reproducing the issue
    Prerequisites:
    Enable Fixed Assets is ticked Administration->System Initialization->Company Details->Basic Initialization.
    Scenario:
    1. Define a Fixed Asset
    2. Create AP invoice (Purchasing AP->AP Invoice) or Capitalization (Financials->Fixed Assets->Capitalization) for fixed asset and planned depreciation for each month is 100 for example
    3. Run depreciation to post depreciation for this asset, for example 400 is shown in 'Posted Depreciation' column in Fixed Assets Master Data ->Depreciation Tab
    4.  Cancel  the document you have created in step 2 via Data->Cancel
    Actual behavior:
    In fixed asset add-on: The posted depreciation remains in the 'Posted Depreciation' column in Fixed Assets Master Data ->Depreciation Tab
    In Business One version 9.0: Value in 'Posted Depreciation' column in Fixed Assets Master Data ->Depreciation Tab is cleared.
    Cause
    Behavior change.
    Solution
    In Business One version 9.0, there are three status for asset master data, which are "New", "Active" and "Inactive". If the status of the asset is "New" after its first capitalization is cancelled, no data would be shown in the grid in Asset Master Data's Depreciation tab. But users can still run depreciation again to clear the posted depreciation.
    And In Business One version 9.0, users can define the default behavior when canceling the first capitalization document via Document Settings form -> Per Document tab, and choose Capitalizatindocument -> check box 'Deactivate Fixed Asset After Capitalization is Cancelled'. If this check box is chosen, the status of asset master data will be "Inactive" after its first capitalization is cancelled, otherwise, the status will be "New".
    With Regards
    Balaji Sampath

  • Integrate with Fixed Assets Module

    Hi
    I am new on the oracle e-business suite , and one of may task now is to find the way at which we can integrate with these application (especially Fixed Assets Module ) .
    I think one way to do that either oracle may be providing interface tables / view or some API .
    So if any one where I can start my efforts toward that issue it will be so helpful for me .
    Thanks on advance
    Bassem Halawa

    Hi ,
    Its nice of you to thank me for the offer, but I am not offering any thing. I mentioned to check what oracle EBS is offering.
    according to your mail, it appears you are looking for out-bound integration with Oracle FA. it also appears that you need some data from asset register and asset assignments for the reporting purpose. you can customize the available reports with oracle FA.
    thanks,

  • Adding an already depreciated asset in Fixed Assets module from a manual sy

    Guys can someone help me how i can be able to show depreciation for assets that have already depreciated in a manual system.
    When am adding assets in the EBS FA module, the module is considering the assets as new and the prorate is depreciating the assets after 6 months as an accounting principle offcourse this is true for new assets.
    But in my case the assets are old in my organization, I would like to enter the accumulated depreciation for these assets and there original cost.
    Please help me to convince my managers as am the one who recommended for the Oracle EBS Project in my organization.

    Hi,
    i have posted a fourm with user534587 adding a parameter to existing report in GL module
    does any one please help me in this issue its very urgent my client is asking for this report.
    i will be very thankful to you .
    Regards,
    Azeez.
    [email protected]

Maybe you are looking for

  • Having issues with your Card Readers in Windows 7 not working? Here's resolution!

    You do not need drivers for the card reader. There are NO Windows 7 drivers. (1.) Click on the Start button and then choose Control Panel. (2.) Click on the Administrative Tools a window will open. (3.) In the Administrative Tools window, double-clic

  • About FlowLayout

    Putting some button into a JFrame, the buttons auto wrap when size of JFrame changed. but if put buttons into a JPanel,and the JPanel in a JFrame the buttons don't display in multi line as JFrame resizing what's the reason? Is there anyway to resolve

  • Field BSEG-ZFBDT. does not exist in the screen SAPMF05A 0304

    HI, Despite field status similarity (at 0B41 and OB14/OBC4-Payment Transactions- Due Date) in Development Client and  Quality Client, we are not able to see/ find the  the field ZFBDT (Baseline Date / Due Date) on the screen in quality cleint for fol

  • Excise base not showing in ARE1 & ARE3 docs

    Dear All, When I am creating ARE1 or ARE3 document then under item details, the duty rates & excise base value is not showing in the system thou the Excise duty values are coming correctly. Due to above I am unable to get it in the print out of ARE 1

  • What does it mean if my location services are turned on, but not working?

    What does it mean if my location services are turned on, but not working?  It has always worked before.  It is turned on in Settings but when I try to use an app that requires location services, it says they are not on, and the little arrow is not ap