Doubts regarding CATS Record and CATS Release
Dear Experts.
I am new to ESS_MSS area.
My requirement is I need to add some UI fields to the CATS DATA RECORD screen. I have 15 components in the CATS business package. Please help me which is relevent component for this issue.
Regards
Shanmukha
Shanmukha,
Please post the question in relevant forum
to give you some hint you can add new fields
go to tcode Spro :
Cross-Application Components / Time Sheet / Settings for all user interfaces / Customer-Specific Modifications / Create Customer Fields
check tcodes CAC1,CAC2
Thanks
Bala Duvvuri
Similar Messages
-
Hello,
I am trying to test an external speech synthesizer on my laptop, a MacBook pro running os 10.6 snow leopard. I have a question regarding the echo and cat commands. I wondered if I have to set something up in order to use cat or echo with my doubletalk speech synthesizer. I have my speech synthesizer hooked up to a USB to serial adaptor and my adaptor plugged into a USB port on my laptop. I have tested my synthesizer with a terminal emulator called Kermit. And everything seems to work i.e. my synthesizer produced output, so I believe my synthesizer, my USB to serial adaptor and it's driver, are all working. My question is if I want to use the cat or echo command to send data to my synthesizer do I have to set anything up? Like the speed my synthesizer needs is 9600 baud, would I have to set up my computer in terminal to have a 9600 baud speed? Speed by the way is just an example, I believe the speed is correct. btw I know about VoiceOver.Have you checked in with the app 'Audio MIDI Setup' to see if perhaps anything there applies. Located in the Utilities folder btw.
Sounds interesting and good luck in any case. -
Small doubts regarding devices and permissions
Hill all,
Continuing with my experiences with Oracle 11gR2 and Solaris 11, i came up with some "small" doubts regarding the permissions and owners of the devices to be used as ASM diskgroups. I was able to install Grid and the database, both 11.2.0.3.0, in a single-instance configuration, but i had a small issue when creatind the diskgroup for the database data (+DATA). I created 3 devices (VirtualBox) to be used in the +DATA dg, and gave the the "oracle:dba" owner, with the permission 660. My doubts are:
1) It wouldn't be more correct to make the owner of the device the user grid? (grid:dba)
2) The permission 660 to the devices is the correct, or recommended permission? It did work with this permission.
Thanks in advance.It depends on the user and group that runs the ASM instance. It can be oracle/dba, but can also be a different user, e.g. grid/asmadmin
http://docs.oracle.com/cd/E11882_01/install.112/e22489/storage.htm#CHDFAGJD
660 means rw. That should be ok. No other user/group than the ASM instance needs to access the devices. -
How can we integrate CATS & PPM and to retrieve CATS time recording data in PPM ?
Dear experts,
Following the previous question of Ruxandra Petrina called "record times with CATS", I am facing an issue with the report DPR_CATS_CPR_TRANSF : it shows nothing despite I activated PPM accounting integration.
There are the steps I followed, I really don't understand what is missing. In PPM I can transfer and assign my projects to WBS elements automatically or manually.
1. We allowed time confirmation for projects
2. We replicated personal number as business partners
3. We activated worklists and project assignments @ data entry profiles
4. We set up ALE & RFC connections
5. We activated the integration scenarios on WBS element : automatic and manual creation of WBS element assigned to PPM elements. Then we set up data profiles for time recording in cat2.
6. We enter times, we released it (approval is not required) + saving
7; We launch the program in SE38 of both ERP or SOLMAN systems : NOTHING appears.
Our goal is to see the times recorded in CATS in the Confirmed work field of PPM.
Can you please help me out with this issue ?
Many thanks in advance.
Best,
CassokéHi Cassoke,
If tasks assigned to a user is not listed in CAT2 worklist, then first we need to ensure that the tasks are displayed in the worklist. So the user confirm the times for the tasks using this list and after that only we should be running the report 'DPR_CATS_CPR_TRANF' to transfer the actual times entered by user in CAT2 to PPM project task.
To integrate CATS with PPM, you need to follow these steps.
Customisations:
1) Enable 'Time recording' for tasks & 'Account integration' in project type
2) Customisation related to 'Accounting integration' to be carried out (either single object / Hierarchical controlling, for testing better to use single object - Internal order, since it is easier)
3) Create a time sheet data entry profile
(Refer thread Record working times with CATS for details)
4) Ensure all object links(internal order / WBS) RFC destinations are updated correctly.
Master data:
Business partners creation with BUP003-Employee role & link to HR personnel number
(This is not required if HR integration is activated, since the system creates the BP's automatically. But manually we need to validate the BP's for linkage with few users)
Project:
1) Create project using customised project type (where time recording/accounting integration is enabled)
2) Structure the project with phase/tasks
3) Update duration/work etc., to the tasks
3) Create project roles & staff a resource (BP which is validated for HR personnel number linkage).
4) Assign task to project role with resource in Project role-->task tab
6) Release the project definition and also check for phase/tasks release
7) Change the status of project definition to 'Flag for transfer' (Can be done before project release also)
8) Check whether the internal order / PS project with WBS is created in ERP system(Based on customisation) and linked to project. Check can be made in accounting tab of the project. (If it is not created, then check for object link RFC destination correctness)
In case of automatic internal order creation process, you need to enter the org unit. data in project definition-->additional data of the project.
CATS:
After completing all the steps, the task assigned to the user will appear in the CAT2 transaction.
1) User can confirm the task with actual hours.
2) Run the CATS transfer report mentioned above to update the data in PPM project.
About SOLMAN integration, you can refer to this presentation also.
http://www.sapsa.se/wp-content/uploads/2013/09/9.-ITPPM@SAPSA_131119_IngoPfeiffer.pdf
Regards,
Ravi -
CATS BAPI and Functional Module
The BAPI list given here is used for transferring the data from CATS to HR.
BAPI_CATIMESHEETMGR_INSERT -To Create Data records into CATS DB
BAPI_CATIMESHEETMGR_DELETE -To Delete Data records in CATS DB
BAPI_CATIMESHEETMGR_CHANGE - To change/edit existing Data records in CATS DB
BAPI_CATIMESHEETRECORD_GETLIST - To Display Data records in CATS DB
BAPI_CATIMESHEETRECORD_GETLIST Time Sheet: Data Record List
BAPIEMPLOYEECATS BAPIs for BUS 7025
BAPI_EECATIMESHEET_GETWORKLIST Time Sheet: Read Worklist
Can you explain me what is FM for and what role it plays for BAPI.
thanks
Sunnyhi
BAPI is a function module used in specific cases and they are better
in those particular ones cause they make many checks, so if you have two
options: a function module and a BAPI i�d tell you to use a BAPI.
If you have any other doubts about some BAPIS in particular, be sure to use
transaction BAPI
they have great documentation there.
regards
kunal -
hello
my pc has following configurtion
256mb ram
60gb hdd
p4 2.4 ghz
win xp pro sp2
I want to know if my pc will be able to run " Oracle Database 10g Release 2 (10.2.0.1.0) " standard edition on it.
<<http://www.oracle.com/technology/software/products/database/oracle10g/htdocs/10201winsoft.html>>
I thought of increasing RAM, but it is not feasible.
I know i could run oracle XE, but can my pc also run the standard edition.
I could not find minimum hardware requirements for standard edition on this site.
anyway, i will use it for sql and and other advanced concepts in RDBMS which i may learn during my course in database. so i prefer standard edition instead of XE
any help greatly appreciated
thanks in advanceI suggest you not to doubt regarding Oracle Database 10g Release 2 (10.2.0.1.0) installation.
It is not necessary. If you don't receive an answer within a reasonable amount of time you could edit your thread with whatever ( a period is enough) to raise it to the top once again.
It becomes difficult for us to track duplicated threads and unnecessarily duplicates efforts.
~ Madrid. -
Regd. ESS and CATS in ABAP webdynpro
Hi Friends,
Currently we are under ECC6.0 with the following SP13.
SAP_BASIS 700 0013 SAPKB70013 SAP Basis Component
SAP_ABA 700 0013 SAPKA70013 Cross-Application Component
And iam looking is the ESS and CATS are available in ABAP webdynpro , i know thta these are available on JAVA side.
If i want to get ESS and CATS in ABAP Web dynpro , what we have to do ???
Could you send me useful links for ESS and CATS in ABAP webdynpro on Portals side.
Srinivas.Hai,
Please find the below links.....
http://help.sap.com/saphelp_nw04s/helpdata/en/77/3545415ea6f523e10000000a155106/frameset.htm
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c2fad86f-0401-0010-91ac-bdb38595a735
/people/heidi.geisau/blog/2005/12/21/web-dynpro-abap-goes-live
http://help.sap.com/saphelp_nw04/helpdata/en/dd/e9863596db1d23e10000009b38f889/frameset.htm
Regards,
Yoganand.V -
Dear All,
Pl. tell me what all the necessary settings required for CATS, here I setup all profiles under CATS Regular and I assigned one standard workflow TS40007901 for that here my problem is
1. I entered the working times in CAT2 afer saving this it is showing an error message that workflow cannot run.
so pl, suggest me this what I can do to run this.
Regards,
Sushma.1) Use transaction PFTC
2) Select 'Standard Task'
3) Key in your Task number, in this case will be 40007901
4) Go into edit mode
5) Go to 'Default rules' tab
6) At the column 'Rule' at the row 'Agent(Default Rule)' put in the value 00000168 and check the binding checkbox.
This should do the trick.
Hope it helps. -
Difference b/w item cat gr. and general item cat gr.
Hi everybody,
Can anyone plz tell me the difference between item cat group and general item cat group.
Thnx in advance....
With regards,
SubhItem category group determines the behaviour of the item,Whether it is value item or free item.
General item category group determines the category of the item ,Like trading goods,service goods or finished goods.
The item category group determines how a material is processed in the sales order. It defines, for example, that pricing does not take place for a free of charge item, such as a business gift; or that inventory management is not carried out for a service. When processing sales and distribution documents, the system uses the item category group to determine the item category. The system determines the item category based on the item category group of the material and the current business transaction, and proposes it in the respective document.
When creating the material types non-stock material and services, DIEN is proposed in both cases for the item category group, because the order processing for both material types is identical: for example, pricing is carried out for both, but no availability check. -
I was looking at the "Find my iPhone" app and I have a doubt regarding how it works for the macbook. In order to detect the location, the macbook should remain signed into iCloud. What if the person who has stolen my macbook logs out of iCloud.
It should work fine for iPhone/iPad because we can enable "Restrictions" to prevent the user from signing out of iCloud. Do we have simialr settings for the macbook?
Thanks,If it's not on the device list, it indicates that someone has gone to Find My iPhone on icloud.com and manually deleted it from the device list (as explained here: http://help.apple.com/icloud/#mmfc0eeddd), and it has not gone back online since (which would cause it to reappear on the device list; Find My iPhone has been turned of in settings on the device; the iClolud account has been deleted from the device; or the entire devices has been erased and restored.
Unfortunately, there's no other way to track the phone other than through Find My iPhone. You could call your carrier and see if they would blackliste it so at least the theif couldn't use it. -
Hi, my iPad dies in the middle of a purchase for a game add on, when I charged the iPad and reloaded the game a box is on the screen that says " cannot complete your purchase" I can't slope this box, and cat play the game while it is there, I have tried removing the game several times and reinstalling but the box still appears, I even tried installing the game on a different apple I'd, and still the box is there, do you k ow how to fix this?
Hi Bev076,
I would try these ideas first:
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430
If that doesn't resolve the situation, I would suggest reporting it:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
http://support.apple.com/kb/ht1933
Take care,
- Ari -
morning. I download podcast on my iMac and listen to them on my iPhone. Since last week the iPhone plays the podcast back slower than recorded and with a echo. How can I solve this?
Regards,
MennoHello,
If you're in a country where there's an apple shop (unfortunately not mine), go check it and ask the employee about it: he's gonna check your Iphone on a "device"
I've got an iphone 5 and it's working very well with me but I have to admit that its battery lasts (slower) than my Ipad 2.
Still i can help with some tips that may improve your iohone's battery by an hour in addition (hopefully):
- close all apps by multitasking....
- do NOT keep the brightness to the max
Believe me you're gonna regret changing your phone to a samsung
Hope i've helped and sorry for my bad english (has english as 3rd language) -
ESS and CATS available in ABAP webdynpro
Hi Friends,
Currently we are under ECC6.0 with the following SP13.
SAP_BASIS 700 0013 SAPKB70013 SAP Basis Component
SAP_ABA 700 0013 SAPKA70013 Cross-Application Component
And iam looking is the ESS and CATS are available in ABAP webdynpro , i know thta these are available on JAVA side.
If i want to get ESS and CATS in ABAP Web dynpro , what we have to do ???
Could you send me useful links for ESS and CATS in ABAP webdynpro on Portals side.
Srinivas.Thanks To your Reply.
So we have to live with current ESS which is in Java Iviews on portal side.
There is no as such ESS availble with SAP SP17 or EP7 side for ABAP web dynpro.
If we want to make it available , then we have to go for custom development right.
But Travel & Expenses are available in both JAVA webdynpro and ABAP webdynpro , how come SAP give partly give the package in JAVA and ABAP.
Please clarify me.
Srinivas. -
802.1q between CAT 6500 and Passport 8600
Hi,
I`m configuring 802.1q trunking between CAT 6500 and passport 8600, in CAT 6500 I configure the port as trunk dot1q mode ON. In Passport 8600 I configure the port as TAG port.
I cretate the same vlans in both switch, but the interface vlans are create in CAT Switch. all hosts in Passport Switch that belongs to vlan 1 can ping his default gateaway (Interface Vlan) but hosts that belong to other vlan no.Please somebody helpme
-
We have installed the portal for updating absences.
We develloped an abap to transfer the absences from The portal to HR and CATS
Know we are missing some realstions (AWREF) between HR and CATS because HR works with periods and CATS works with days.
Can someone help to solve this problem or tell me if the missing of this relations is harmful
gr
Jo and JeannetteI have the same concerns. There is JSR 177, but it will solve the problem?
Maybe you are looking for
-
How do I transfer contacts from my old iphone to my new one??
I have found similar threads but they don't appear to have many answers. Would appreciate some assistance on this as I'm not much of a techie so am looking for pretty simple steps to follow. Thanks... Rob
-
My computer is just not working
I went on my computer and it was being slow and teh fast forward,backward, and play buttons were not working. I have tried to shut it down,sleep,and restart but it is not responding. It will also not let me open any applications except for chrome. Pl
-
Integrated LiveCache Installation
Hi, I installed an SCM server 5.0 with an integrated liveCache on a 64 bit Windows platform. When I'm trying to initiate the connections LCA, LDA and LEA that I created, i get this error stating that the database instance is not found. Here's the sp
-
iPod Nano 2nd Generation is requesting 4 digit code. I have never set a lock code. What is this and how can I get my Nano running again?
-
Windows 8 PHotkey for MSi CX480
Is there any PHotkey for MSi CX480 Windows 8? All of my function buttons is not working on windows 8. If you have any solutions, let me know . Thanks!