Down Payment Request for a Purchase Order Type K

I am making a down payment request to a supplier where the purchase order is of type K.
At the time of recording the payment request (A-47) the transaction meets the cost center of the purchase order and, because of having a message class (KI 281), blocks the release.
The question is:
At present the validation of the message class (OBA5) should validate the account of the purchase order or the supplier's account of the F-47?
Rgs,
Ivair

Hi
KI 281 message says that the GL account has to be created as a cost element. So, please create a cost element for the GL you are using (KA01). Hope this is the problem.
If this does not work, please let me know.
Thanks,

Similar Messages

Down payment request to the purchase order as a whole for f-48

Hi Gurus
I want to post vender down payments request and make the relation with the purchase order.
Up to now the systems ask for the purchase order number (mandatory) and the line item number (mandatory)
As we have with our customer PO's with sometimes more than 100 line items, we do not want to relate down payments request for every PO line item.
Is it possible to link the total amount of the down payment request to the purchase order as a whole(we can say as Header), so without the line item numbers.
Actually looking for any screen exit is available for that or any other way.
Regards
RK

Check for FI user exits in this link
http://wiki.sdn.sap.com/wiki/display/ERPFI/UserExitsin+FI
Check also this links
USer Exit / Badi F-47 & F-59
http://wiki.sdn.sap.com/wiki/display/ABAP/Find%2bApplication%2bclass%2bwith%2bExits%2band%2bBadis%2bfor%2ba%2bTransaction
Edited by: Jeyakanthan A on May 25, 2010 1:03 PM

Vendor down payment request to MM purchase order

We want to post vender down payments request and make the relation with the purchase order.
Up to now the systems ask for the purchase order number (mandatory) and the line item number (mandatory)
As we have with our customer PO's with sometimes more than 100 line items, we do not want to relate down payments request for every PO line item.
Is it possible to link the total amount of the down payment request to the purchase order as a whole, so without the line item numbers.
Thanks
Martien
Edited by: M. van den Eshof on Mar 12, 2010 1:10 PM

Dear Martien,
we have had the same problem here at our company. In ECC6.0 we haven't found a solution for this.
We are doing a workaround:
We post the down payment request only on one, the main item in the purchase order. But this causes negative effect on cash management.
If you find a other solution, so please tell me.
Best regards.
Manuel

Down payment request to the purchase order as a whole

Hi Gurus
I want to post vender down payments request and make the relation with the purchase order.
Up to now the systems ask for the purchase order number (mandatory) and the line item number (mandatory)
As we have with our customer PO's with sometimes more than 100 line items, we do not want to relate down payments request for every PO line item.
Is it possible to link the total amount of the down payment request to the purchase order as a whole(we can say as Header), so without the line item numbers.
Regards
RK

Hi
Actually looking for any screen exit is available for that or any other way
Rgs
RK

Down payment request based on purchase order

Dear all,
How to make down payment request(F-47) based on purchase order(not line item wise) ?,
Currently in F-47 it is asking to enter amounts purchase
order line item wise,because downpayment is made only for entire purchase order value not line item wise.
How to solve this issue ?
Jeyakanthan

Hi,
This is SAP standard functionality. you have to specify line item, though you specify line item system will check for whole PO. and while posting invoice you will get information of the down payment.
Regards,
Raj

Down payment request for PO

Hi Guru's,
Can anyone tell me the down payment process for Purchase order in SAP.
We have a PO which we need to make payment 50% advance and 50% after 30 days.
a. All configuration did for MM and FI
b. Payment term
c. Down payment request
d. Down payment
Thanks in advance
Deepak

Dear Anand,
Thanks for your reply. But my query is not that.
Down payment request should be generated subsequent to purchase order creation.
a. Kindly confirm whether it is manually(if so request you to provide TCode other than F-47) to be created from MM Module.
b. How to automise the payment request subsequent to purchase order.
Please help and points will defnitely be assigned.
Thanks
Deepak

Down payment request for assets using bapi_acc_document_post

Hi guys(girls)!,
I<< priority reduced >>
I'm posting a down payment request to an asset with a z program using bapi_acc_document_post. Everything is fine, but, when i go to fb03 to check the generated document i don't see the asset number associated to the purchase doc. When i go to bseg to check, i don't see the asset number and the subnumber. I lack just these to fields even i'm passing the values to correct fields in bapiacgl09.
This is the values i'm passing:
wa_acctgl-itemno_acc = iterator.
wa_acctgl-gl_account = lv_skont.
wa_acctgl-vendor_no   = p_vendor.
wa_acctgl-doc_type    = p_tipdoc.
wa_acctgl-item_text   = p_txtcab.
wa_acctgl-po_number   = p_ponum.
wa_acctgl-po_item     = s_ekpo-ebelp.
wa_acctgl-serial_no   = imp_no.
wa_acctgl-asset_no    = wa_ekkn-anln1.
wa_acctgl-sub_number = wa_ekkn-anln2.
wa_acctgl-acct_type   = 'A'.
wa_acctgl-CS_TRANS_T = '100'.
wa_acctgl-asval_date = sy-datum.
APPEND wa_acctgl      TO gt_acctgl.
CLEAR wa_acctgl.
Please help!.
Edited by: Rob Burbank on Oct 24, 2011 9:44 AM
Edited by: ramvargash on Oct 25, 2011 2:54 PM

Hi Eduardo, what i'm trying to do is a down payment request for an asset. Indeed, i do the post. My problem is that the asset main number and the asset subnumber are not getting saved in bseg, so when i go to fb03 and double click on a line item, i got prompt to fb03 in visualize mode, and the fixed asset field is blank.
I have now a week trying to get the asset main number and the asset subnumber getting saved in bseg. I note that i have other field that are not getting saved 'cause i'm not passing the value thru the bapi. This field is LNRAN.
If you or anybody have a clue how to solve this, i would appreciate the help.
Ramón Vargas

Which number range is used for down payment requests for vendors?

Hi,
Which number range is usually used for down payment requests for vendors?
I would like to use it for:
Y002 vendors (emplyees)
Y004 vendors (1-time vendors)
Y005 vendors (confidential vendors)
The invoice will be posted via FI via Tcode FB60, FB65 & FB10 and F-02.
Thank you for your feedback.
Kind regards,
Linda

Hi
For down payment request the Document type is KA hence the number range which is applicable to KA is applicable for vendor downpament also.
In your case the number range is based on document types and not related to vendor types.
Thanks
Srinivas

Down payment request for other special GL transactions

Hi ALL,
Is it possible to post down payment request for other special GL transactions?
If not , I Have a scenario that I have to generate down payment request with different alternative reconciliation accounts , but same reconciliation account.
As we cannot assign different alternative reconciliation accounts for same reconciliation account in special GL indicator "F- down payment request), how to post down payment request with different alternative reconciliation accounts?
Even though I have created different special GL indicators for different alternative reconciliations accounts with same reconciliation accounts, I couldn't post down payment request, only down payment is possible. how to solve?
regs,
ramesh b

Please do the following
1. Activate Reconciliation account ready input setting for your Main reconciliation account in FS00
2. If you dont find the setting in FS00, then you have to change FSG settings for this account group in OBD4.
3. Also assign alternative reconciliation accounts to your reconciliation account
Now system asks you to input the alternative recon account when you do the transactions.
Rgds
Murali.N

Descriptive flexfield for different purchase order types

Hi,
Can i have a descriptive flexfield for different purchase order types?
Scenario : I have two purchase order types
1. Blanket : done from req--> auto create --> standard PO
2. Standard --> Direct PO
Regards
846691

You can use darpan77's suggestion for context sensitive DFF. See http://oracle.anilpassi.com/context-sensitive-descriptive-flexfields.html for an example.
However, both options you mentioned talk about standard po. Is the difference in how they are generated? (One is manual and the other is autocreated?)

Down payment request for asset-based Purchase order

Please Help!
I have a PO for an Asset for 10000$. down payment need to be paid for $5000.
I went to f-47 to create down payment request BASED ON PO and there is no field to put the PO number.
What am i missing? Is there config need to be done? or anyting on the PO need to be checked?

Hi
Look for 'Purch. Doc.' field. If not, check the field status in OBC4 and OB41
Thank You,

Help Needed with creting down payment request without tax from order

Hello,
We are trigerring a down payment request from sales order. There is no tax to be collected on down payment. When the billing document is created SAP copied over tax elements from order and posts a relevant tax code on the down payment billing document. How can we force a zero tax code on the DPR billing document?

Hello Pankaj,
I think you don´t want to determine any tax condition?
Try to assign requirement 84 to your tax condition(-s) in the pricing procedure. This requirement helped me not to determine
other condition types in the down payment billing document.
If you just want to determine a different tax code the solution could be to define a new table (key kombination) in the access sequence assigned to your tax conditions. That new table could include the billing type in additional to other criteria and can help you to determine a different tax code with otherwise identical parameters.
Hope this helps.
Regards
TDI

Down payment request for contract with periodic billing

Hi Friends,
Could anyone help me in understanding the configuration settings for down payment / advance payment senario for a CONTRACT which has Order related billing (I have done for Order with milestone billing plan).
The contract has order related *periodic billing plan* where settlement period is suppose quaterly billing and actual invoice is happening on 1st date of the quarter. But i want to create a down payment request say 10 days before the billing date[(actual invoice(F2) date] of every quater as an advance payment/ down payment.
FYI...
For order i am using standard billing rule 1 in milestone billing plan for final invoice but for downpaymnet billing dates (added additional settlement periods then actual invoice settlement period like 3 adv pay ment og 20%, 30% 50% & one actual invoice period for whole amount 100% as D4 doc only) i am manually changing the billing rule as 4 to create a down payment req.
But in contract as its has periodic billing plan no billing rule changing option (no additional settlement period can be added, only settlement period for actual invoice is getting proposed) so i can't have two different rule for a settlement period. no settlement period can be added separately for adv paymnet/down payment.
Kindly respond ASAP.
Rgds
Manish

Hi, Many thanks for your response.
But the down payment functionality for a SO with milestone billing i have already implemented.
The question was for CONTRACT Side (say rental / service contract). The contract has periodic billing (monthly / Q'ly).
Kindly let me know if you/anyone has any idea for config settings for a contract with the senario mentioned in previous thread post.
Thnx & Rgds
MG

Down Payment Request for Delivery-Related Item

Hi,
My customer has a scenario where they will need make a down payment request to the customer before delivery. E.g. For a sale of Item 1 ($100), they need a deposit of $10 before they proceed with the delivery. After the collection of the 10% down payment, they will deliver the goods and invoice the remaining 90%.
I've checked the Billing Plan/Milestone Billing functionality, however it only applies for order-related billing item. Has anybody here encountered similar scenarios? What are the suggested methods to tackle this scenario?
Appreciate your help in this. Thanks!
Regards,
Xien

Please do the following
1. Activate Reconciliation account ready input setting for your Main reconciliation account in FS00
2. If you dont find the setting in FS00, then you have to change FSG settings for this account group in OBD4.
3. Also assign alternative reconciliation accounts to your reconciliation account
Now system asks you to input the alternative recon account when you do the transactions.
Rgds
Murali.N

Down payments request for Asset Under Construction

Hello Expert
while Down Payment request to vendors - for Asset Under Construction, system showing error.
Contact your system administrator (table error)
Message no. AA866
Diagnosis
No account has been entered for posting down payments in area 01 under the account assignment key IN95 (chart of accounts YAIN).
Procedure
Enter the account using the Customizing menu.
Pls Reply frinds.
regards,
Riten patel

Dear:
First check in OAYB that have AUC class been specified for down payments and then go to transaction AO90 and maintain the GL account for depreciation are 01 under the Balance Sheet account in the field Acquisition: Down Payment. It will resolve your issue.
Regards

Down Payment Request for a Purchase Order Type K

Similar Messages

Maybe you are looking for