Downgrading New Mac pro to Mountain Lion
Is it possible to downgrade a New Mac Pro to Mountain Lion?
Apple has removed the Open Transport API from Mavericks and we need it to run a specific medical program.
The software runs on our old Macs. Just wondering if its ok to do this on the new Mac Pro.
Thanks for the thoughts people.
I didn't think it could be possible.
We have a solution - albeit a messy one.
The software component that is incompatible is a DICOM server (medical image server). The actual viewing software used to manipulate the image is compatible - just the image import component is not.
Putting it simply we will set up some folder aliases over the network so the viewing software will just use the image folders on the old Mac as their repository.
We have also contacted the developers to get them to update their software! As technically, it is not compatible with Mac...
Similar Messages
-
recently purchased a new Mac Pro w/ mountain lion 10.8 and I am using my Apple 30 inch monitor. When watching video or browsing certain websites, my monitor will flicker grey and sometimes lock up. I am a video producer so this is quite frustrating...I figure it is the grphic card or I am missn a plugin or driver update? help!
Maybe this will help:
http://support.apple.com/kb/HT1573
PRAM reset: http://support.apple.com/kb/PH11243
SMC reset: http://support.apple.com/kb/HT3964 -
My brand new Mac Pro running Mountain Lion crashes when installing updates or new software.
My brand new Mac Pro running Mountain Lion crashes and re-boots when installing updates or new software. I can only perform these operations while in the safe boot mode. I have reloaded OSX twice. Does not solve the problem. The machine is brand new. It replaced a previous MacPro that would not support the new Mountain Lion. When my new machine came in. I swaped the dirve out of my old unit into the new and ran the new Lion update. The machine has had this aforementioned problem since that time. Also, I had the Legacy version of File Vault running on the old machine/drive, which I also turned off(thinking that was the problem) but that did not fix the problem either.
Here is my panic log entry:
Sun Nov 18 22:08:42 2012
panic(cpu 6 caller 0xffffff800b4ac90b): Releasing non-exclusive RW lock without a reader refcount!
Backtrace (CPU 6), Frame : Return Address
0xffffff8556cab950 : 0xffffff800b41d626
0xffffff8556cab9c0 : 0xffffff800b4ac90b
0xffffff8556cab9e0 : 0xffffff800b51c09c
0xffffff8556cabc10 : 0xffffff800b510e92
0xffffff8556cabc40 : 0xffffff800b4ff375
0xffffff8556cabf50 : 0xffffff800b7e182a
0xffffff8556cabfb0 : 0xffffff800b4ced33
BSD process name corresponding to current thread: installd
Mac OS version:
12C60
Kernel version:
Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
Kernel UUID: 69A5853F-375A-3EF4-9247-478FD0247333
Kernel slide: 0x000000000b200000
Kernel text base: 0xffffff800b400000
System model name: MacPro5,1 (Mac-F221BEC8)
System uptime in nanoseconds: 427147359117
last loaded kext at 111975561856: com.apple.filesystems.smbfs 1.8 (addr 0xffffff7f8ba85000, size 229376)
last unloaded kext at 127467947009: com.apple.driver.AppleIntel8254XEthernet 3.1.1b1 (addr 0xffffff7f8bf8d000, size 69632)
loaded kexts:
com.zeobit.kext.Firewall 2.3.1
com.apple.filesystems.smbfs 1.8
com.apple.driver.AppleIntelProfile 97
com.apple.driver.AppleBluetoothMultitouch 75.15
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.filesystems.autofs 3.0
com.apple.driver.AudioAUUC 1.60
com.apple.iokit.IOBluetoothSerialManager 4.0.9f33
com.apple.driver.AGPM 100.12.69
com.apple.driver.AppleTyMCEDriver 1.0.2d2
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.driver.AppleUpstreamUserClient 3.5.10
com.apple.driver.AppleMCCSControl 1.0.33
com.apple.kext.AMDFramebuffer 8.0.0
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.driver.AppleHDA 2.3.1f2
com.apple.AMDRadeonAccelerator 1.0.0
com.apple.driver.AppleMikeyDriver 2.3.1f2
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport 4.0.9f33
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.ApplePolicyControl 3.2.11
com.apple.driver.AppleLPC 1.6.0
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.2.2
com.apple.iokit.SCSITaskUserClient 3.5.1
com.apple.driver.AppleFWOHCI 4.9.6
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.driver.AppleUSBHub 5.2.5
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.driver.AirPort.Brcm4331 602.15.22
com.apple.driver.Intel82574L 2.3.0b4
com.apple.BootCache 34
com.apple.driver.AppleAHCIPort 2.4.1
com.apple.driver.AppleUSBEHCI 5.4.0
com.apple.driver.AppleUSBUHCI 5.2.5
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleACPIButtons 1.6
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.6
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 196.0.0
com.apple.nke.applicationfirewall 4.0.39
com.apple.security.quarantine 2
com.apple.driver.AppleIntelCPUPowerManagement 196.0.0
com.apple.driver.AppleProfileTimestampAction 97
com.apple.driver.AppleProfileThreadInfoAction 97
com.apple.driver.AppleProfileRegisterStateAction 97
com.apple.driver.AppleProfileReadCounterAction 97
com.apple.driver.AppleProfileKEventAction 97
com.apple.driver.AppleProfileCallstackAction 97
com.apple.iokit.AppleProfileFamily 97
com.apple.driver.IOBluetoothHIDDriver 4.0.9f33
com.apple.driver.AppleMultitouchDriver 235.28
com.apple.kext.triggers 1.0
com.apple.iokit.IOSerialFamily 10.0.6
com.apple.driver.AppleUSBAudio 2.9.0f6
com.apple.driver.DspFuncLib 2.3.1f2
com.apple.iokit.IOAudioFamily 1.8.9fc10
com.apple.kext.OSvKernDSPLib 1.6
com.apple.iokit.IOSurface 86.0.3
com.apple.iokit.IOAcceleratorFamily 19.0.26
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport 4.0.9f33
com.apple.iokit.IOBluetoothFamily 4.0.9f33
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.kext.AMD5000Controller 8.0.0
com.apple.kext.AMDSupport 8.0.0
com.apple.driver.AppleGraphicsControl 3.2.11
com.apple.iokit.IONDRVSupport 2.3.5
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.AppleHDAController 2.3.1f2
com.apple.iokit.IOGraphicsFamily 2.3.5
com.apple.iokit.IOHDAFamily 2.3.1f2
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.driver.AppleSMC 3.1.4d2
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.IOPlatformPluginFamily 5.2.0d16
com.apple.driver.AppleUSBHIDKeyboard 165.5
com.apple.driver.AppleHIDKeyboard 165.5
com.apple.iokit.IOUSBHIDDriver 5.2.5
com.apple.driver.AppleUSBMergeNub 5.2.5
com.apple.driver.AppleUSBComposite 5.2.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.5.1
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.5.1
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IO80211Family 500.15
com.apple.iokit.IOUSBUserClient 5.2.5
com.apple.iokit.IONetworkingFamily 3.0
com.apple.iokit.IOAHCIFamily 2.2.1
com.apple.iokit.IOUSBFamily 5.4.0
com.apple.driver.AppleEFIRuntime 1.6.1
com.apple.iokit.IOHIDFamily 1.8.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 220
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 344
com.apple.iokit.IOStorageFamily 1.8
com.apple.driver.AppleKeyStore 28.21
com.apple.driver.AppleACPIPlatform 1.6
com.apple.iokit.IOPCIFamily 2.7.2
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0 -
I have a new mac powerbook pro OS X 10.8.1 and cannot connect to my canon 6000B printer - the printer appears in the printer list but will not install and I can't find a driver on the net - does anyone know what the solution is?
dino1335 wrote:
Thanks for getting back. I need help here
1 What do you mean by System Information? Is that System Preferences?
System Information is located in Applications > Utilities. It shows lots of information about your Mac, including information about the printer queues.
dino1335 wrote:
2 When I go to System Preferences and click on the printer LBP6000/LBP6018 there is no information in that window about the URI if I click Open Print Queue there is no information other than the ID of the printer
In previous versions of OS X you did see this information via the Options & Supplies pane for the selected printer in Print & Scan. But with 10.8 this information was removed so know you need to use System Information > Printers to see information about an installed printer.
dino1335 wrote:
3 If I print a document it just goes to print (it goes through the printer but no information is printed on the paper) there is no print cue so I don't know where to find the information on the URI or what I am supposed to copy
I believe that the document does not print because the print queue has not been created correctly. The CAPT driver requires a specific queue name and if the queue name is wrong then you will not be able to print.
dino1335 wrote:
FYI I also have a MacBook Pro (old) with Leopard which I also print to the same printer on and there isn't a problem with that just with this new MacPro which has Lion installed
Not surprised to read that. Mtn Lion has caused some issues for owners of CAPT printers, especially if they upgraded to 10.8 from 10.7 or 10.6.
Since you mention the ability to print on 10.5, I just want to check that you are physically moving the USB cable connected to the LBP from the 10.5 Mac to the 10.8 Mac, rather than sharing the printer from one Mac to the other. Because if you are sharing the printer from the 10.5 to the 10.8 Mac then this can be a cause of your current issue. The CAPT driver does not work when it is being shared to other Mac's. -
Hi! is it possible that Logic X has upgrades that work only with mavericks and does t work in mountain lion....since in my macbook pro with mavericks i have new views of the equalizer, etc and in my mac pro with mountain lion it still the old view...
Any OS version of 10.8.4 or later has all features that are not OS depended. The plugins are one example. You probably haven't updated all versions of Logic Pro X to the latest one.
-
Connect my new Macbook Pro with Mountain Lion to my HP PhotoSmart B210
How can I connect my new MacBook Pro with Mountain Lion to my hp b210 printer? My printer is about 1.5 years old and works wirelessly just fine with my PC. I just switched to mac. The printer is supposed to be airprint compatible according to HP. HP has no software drivers for me to download. Instead they say to use Mac Software Update to get the software. However, there are no updates when I try that. I have tried adding the printer manually using it's IP address and can print a test page, but when I try to print using an application on the Mac it cannot find the printer or says the printer is in use. Help!!!
Are you sure it has no usb port?
http://h10010.www1.hp.com/wwpc/us/en/sm/WF06a/18972-18972-238444-421635-410635-4 021933.html?dnr=1
Connectivity, standard
1 USB (2.0); 1 Wireless 802.11b/g/n
The usb cable you need looks like: -
Hi,
I purchased Huawei Dongle and trying to connect with my new MacBook Pro (OS- Mountain Lion) USB port 3.0 but unfortunately it does not support.
When I plugged in my macbook the power is flowing in dongle due green light blinking twice in every 3 sec but no connection found or diver shown.
Please let me know how I have to use it. I got some suggestion for USB hub 2.0 but It does not make any sense and driver installation.
So please suggest proper direction to use it and provide link to install any driver.
Thanks
Tauheed AhmadYes Clinton I did same, but they were (Huawei customer support) surprised about this problem, They behave like they have no idea about USB 2.0 and 3.0 knowledge. They handsUp that reason I posted my problem in this forum.
So is there any better solution to use any mediator between these USB version handling, Please let me know.
Thanks
Tauheed -
I had no problems scanning from the Epson Artisan 730 all in one until I upgraded my Powermac G5 to a mid-2010 Mac Pro with Mountain Lion 10.8. The printer is installed with most recent drivers from Epson (the install disk will not work on 10.8 anyway). I can scan directly from the Print and Scan system preference under the scan tab of the printer and it prints fine from Acrobat. When I go to Document -> Scan to PDF, it brings up a dialog box in which the first input is box is Scanner: "Please select a device" with up and down arrows on the right. When I click on the up and down arrows, there are no selection options other that "Please select a device" with a check mark next to it. This printer is wireless, as is another Canon which also has a scanner and neither appear as available. Very frustrating. I have repeated the instalation process (for the Epson downloaded driver utilities) and it just is not seen.
If anyone has any workarounds or solutions, I would be grateful.1strail wrote:
Of course now I have a red badge on the App Store that is asking me to update the Epson driver. I wonder if that will blow out the TWAIN driver. It's epson14333.dmg.
No. Your TWAIN drivers are separate than the Image Capture Device drivers that would be installed by the printer driver update.
Also, no way of getting rid of the badge notification in system preferences. App store is not listed.
There is no law that you must update software just because it is available. There is no way to get rid of the red badge, but you don't have to do the upgrade. -
Why can't I update my Mac Pro to Mountain Lion?
Here is the system info for my Mac Pro. I'm told I can't update to Mountain Lion because my Mac isn't compatible. I run pro Tools and now I can't even stay current because Pro Tools 11 requires 10.8 or better. *** is going with you Apple? Do you REALLY think I'm going to go out and spend another 3500.00 just to update my system software. This is a disgrace.
Model Name: Mac Pro
Model Identifier: MacPro2,1
Processor Name: Quad-Core Intel Xeon
Processor Speed: 3 GHz
Number of Processors: 2
Total Number of Cores: 8
L2 Cache (per Processor): 8 MB
Memory: 24 GB
Bus Speed: 1.33 GHz
Boot ROM Version: MP21.007F.B08
SMC Version (system): 1.15f3
Serial Number (system): 40******0GP
Hardware UUID: ******
Fix it
<Edited By Host>OS X Mountain Lion system requirements
To install Mountain Lion, you need one of these Macs:
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminum, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer)
Xserve (Early 2009)
Your Mac needs:
OS X v10.6.8 or OS X Lion already installed
2 GB or more of memory
8 GB or more of available space -
I cannot seem to update Garageband 11 on my new MacBook Pro retina (Mountain Lion)
Hi,
I've just bought a new 15" MBP retina (Mountain Lion). I have Garageband '11 pre-installed.
When i try to add additonal instruments Garageband opens a prompt box and asks if I want to update now or later. I have tried both options and neither work - the app store opens but it cannot find any updates.
Any help would be much appreciated.
thanksSometimes you need to reload the updates page at the App Store after you selected to "Update Later":
From the App Store main menu bar: Store > Reload page
If that does not bring the update forward, see my post here:
Re: Can't download loops for Garage Band '11
Regards
Léonie -
Upgraded mac pro to mountain lion, now cannot get flash to download!!!
ok, here is the problem, I have a work macbook pro that is not connected to a backup time capsule. Upgraded to mountain lion today and nightmare occurs. Flash wont work as in system preferences it said flash was 10.1. something. Tried to upgrade flash to 10.3.something as per adobe site. it would not get past 39% and stopped working. Others questions on the communities suggested pluggins as issue, tried to sort that out to no avail. finally read somewhere that i need to unistall flash and then new version would install. thats where it all went wrong!!! Downloaded adobe uninstaller anf yep it unistalled flash, only problem is the installer for the current flash still wont download. So before I had at least firefox working with the old flash (and not safari!) but now neither work as it registers me as not having flash and needing to install it!! ARGH!!!
Sort of worked a worked around for the time being by downloading chrome, and that works, but does anybody know how I can reslove this, tried following instructions from other threads and it just dont work. I am not a computer geek and its depressing me as I felt deflated after following a link that told me to go to disk utility, that highlighted an error that it could not repair even after command R restart. Is there anyway to return my computer to prior to mountain lion install back to lion without have a time capsule....feeling depresssed as I convinced my collegues to by a MAC because they just work and I am getting grief because it doesnt!!!
HELP pleasehttp://fpdownload.macromedia.com/get/flashplayer/pdc/11.3.300.271/install_flash_ player_osx.dmg
-
Brand new MacBook Pro w/ Mountain Lion and latest Time Capsule
Will the latest version of Time Capsule (2TB) - MDO 032 LL/A work with my brand new late 2012 Mac Book Pro recently received with Mountain Lion (version 10.8.1). Are there any issues?
Please follow these directions to delete the Mail "sandbox" folder.
Back up all data.
Quit Mail.
Triple-click the line below to select it:
~/Library/Containers/com.apple.mail
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu. A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder — not just its contents — to the Desktop. Leave the Finder window open for now.
Relaunch Mail and test. If the problem is resolved, you'll have to recreate some of your Mail settings. You can then delete the folder you moved and close the Finder window. If you still have the problem, quit Mail again and put the folder back where it was, overwriting the one that may have been created in its place. Post your results.
Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically. -
I have a new macbook pro retina running mountain lion. I want to use it with a thunderbolt display. When I close the lid on the macbook pro, everything goes dark.
Plug in the power to the laptop. Then it works.
-
Does "Included Software" not mean "this is the software you will receive when you buy this Mac"?
Ahh OK.
Since Mountain Lion is so new, there may be a some units still in the supply chain that are still shipping with Lion.
Are you near an Apple Store? If you purchase there you'll be more certain about what you're getting.
Or if you order from the online store but do it by telephone (800-692-7753) you can express your concern about getting Mountain Lion.
Matt -
How do you make a startup disk for Mac Pro with mountain lion
My Mac Pro did not come with a disk how do you make one or get one??
If you ever need to repair or reformat your hard drive you need one!If you still have - or can download - the Lion Installer app from the Mac App Store, you'll find an app titled "Install Mac OS Mountain Lion.app" in your Applications folder. If it's not there, and you've already purchased it, just go to the MAS, look under your Purchases tab and download it from there. If you haven't already purchased it, you'll need to do so using your Apple ID.
Once you have the installation app, get a 8GB+ USB flash drive and download DiskMaker X - just plug in the flash drive, start up DiskMaker X and follow the instructions. You'll now have a bootable installation disk.
Good luck,
Clinton
Maybe you are looking for
-
Scan multiple pages into a single PDF document?
How can i scan multiple pages into a single multipage PDF file? I've seen similar questions posted, but I haven't found any good answers. The only advice i saw was to scan each page as a separate PDF document, then merge them into a single PDF using
-
Hi All I have to fetch data from idoc means the values of the idoc fields. In table EDIDD, all the data is getting stored in single field "SDATA". Is there any table in which records stored as individual? Regards.
-
Anyone know about secret tracking data stored by OS4?
I just saw a news report that iPhone and iPad 3G are secretly storing location and time data. This data can be extracted to track the users past movements. Does anyone know anything about this? It sounds fishy to me. Seems like the kind of underha
-
I am using OWB 10g with client version of Design Browser so see what reports are available. So far, I'm not seeing what I want. I can't get "Detailed Mapping Report" to work for any mapping, maybe that has what I want? I can get Impact and Lineage re
-
OVM 3.2.2 Upgrade - OVS account password
I just downloaded the OVM 3.2.2 upgrade and started running the runUpgraded.sh script. I can't seem to get past the password prompt for the ovs user account for MySQL. I've tried every password I could possibly think of. Is there a pre-defined passwo