Download Problems with K8N Neo4 Platinum Nvidia Ethernet Controller

Just to ask if there is some basic setup for Nvidia network drivers in Windows or in BIOS since I'm having download errors with a DSL connection when i use the Nvidia networking controller, not depending from  the OS I'm booting (WinXP Pro SP2 or  WinXP pro 64). When I download using the Marvell Yukon controller everything  works fine in both operating systems. Additional specs:
K8N Neo 4 Platinum (latest MSI Nforce4 drivers)
Athlon 64 X2 4200+
2GB Transcend RAM
EVGA 6600 GT 128MB PCI-E
Samsung Spinpoint 200GB SATA (Win XP Pro + SP2)
Samsung Spinpoint 200GB SATA (Win XP Pro 64)
Samsung TS-H522U DVD-RW
Seventeam ST-550EAG  3.3@30A  5.0@30A  12V1 & 12V2 @ 18A each

Quote from: Indigian on 07-November-05, 00:23:35
Open up the nvidia firewall.
Click on 'Active Armour'
Click on 'Application'
change the setting from 'offloadable' to 'notoffloadable'
This solves the download problem.
Indigian,  you are The Man!!!!!
That solved it !!! Thank you very much!

Similar Messages

  • Audio 5.1 problem with K8N Neo4 Platinum

    Hi,
    First of all, apologize for my bad english (I'm French).
    I have a problem similar to aberdeen5...
    I recently installed 5.1 speakers on my motherboard, but in Windows, Media Player and PowerDVD I only get sound on the 2 front speakers.
    I set 6 speakers in PowerDVD and 5.1 surround speakers in the windows control panel. In the mixer, the sound is on for the six speakers.
    I test the speakers with MSI CoreCell and the MSI sound control panel and the 6 speakers work fine...
    In dxdiag (DirectX utility), the sound test works only on the front speakers when the software buffer memory is used, but when the test used hardware buffer memory, the sound comes well from the 6 speakers...
    I've installed the nVidia unified driver for the nForce4, and the latest Realtek AC97 drivers ( a3.73 WHQL)...
    If someone has an idea, or had the same problem and solve it, eventually even with an other motherboard, I thank him very much to help me :-)
    Have a good day !

    Hi,
    Finally I tried what you suggested, but the problem remained.
    I desinstalled Realtek drivers and installed manually the last nVidia audio ones, included in the 6.53 release. The sound is better, but in PowerDVD it remains on the 2 front speakers...
    Perhaps my version of PowerDVD (OEM 5.0) can't play in 5.1... I will try the Deluxe 6.0 version.
     when you use 5.1 speakers, do you here the 'ting' sound onthe 6 speakers when you turn on/down the system sound in the task bar ?
    I will reinstall the Terratec in my new config and see the behaviour in Windows and PowerDVD 5, then I will know about it.
    I will post a new topic later with the solution if I found something. The posts in "New Nforce audio drivers?" from syar2003 were also useful for me. It's difficult to install the audio drivers and choose between "MCP nvidia" and "audio codec nvidia".
    Thanks again for your help.

  • Memory frequency problem with K8n Neo4 Platinum

    I have 4 banks of memory installed:
    2 x 256 GEIL ddr400 Cl2 and 2 x 512 CORSAIR ddr440 cl2.5, total 1.5Gb ram.
    They are in dual channel mode, but they run at 100hz and not at 200hz.
    If in the bios i set the manual mode for the memory and set 200 hz, than after the reboot they are at 200 hz but in games like wow, css or others the system freezes.
    If i let the auto mode for the memory, the system set them at 100 hz and so the problems disappear.
    I see the value 100 or 200 hz in the "cell menu->ddr rate". This value is confirmed from cpuz.
    How can i set them to 200hz without system freezes?

    Quote from: JayBee on 13-December-05, 03:27:53
    3 gigs (256x2 + 512x2) is an inherently unstable combination.  While the system could boot that way, you are asking the memory controller on the cpu to negotiate too much when it must run one channel at one type of timing and the other channel at an other.  Even under the best circumstances, you can boot that way but will fail memtest when system is stressed.  Only stable way to use all 4 dimms slots is with 4 identical modules (same size, cas, etc, i.e., same everything). When it comes to mixing sizes like that (2x256 and 2x512), Intel can do it (memory controller is on the board) but AMD cannot (memory controller is on the processor).
    Edit- mixing brands (Geil and Corsair) is an other reason why it has to fail.  Intel could do it.  AMD cannot.
    Edit Edit- What 400 Watt psu is that?  Note that you need 18 amps on +12 Volt rail minimum for Neo4.  Does your psu have that?  Just because the label says it, does not make it so.  Check what brand it is.
    The output at 12V is 18A

  • Booting problems with K8N Neo4 Platinum

    hi
    sometimes when i turn on my pc it simply cant boot. ive disabled the full screen msi logo during post to actually get an idea whats wrong. so first it says "main processor:" then "memory testing", it basically counts memory. but when this problem occurs my pc is stuck at the "main processor" text and doesnt continue the booting process. any idea?

    Quote from: BOSSKILLER on 02-August-07, 02:07:43
    VGA problem, --> https://forum-en.msi.com/index.php?topic=34535.0
    check VGA power cable(if your VGA got it), try with another VGA. could be PSU too.
    i already did, but this combination isnt listed in that topic as the rest of the leds here aint red...
    so what? vga isnt getting enough power? i connected the two hdd power connector to the vga just like its manual says. "Two hard disk drive power dongles off of seperate power supply cable bundles." what should i check then?
    a chieftec 420w should be more than enough for a pc like mine from what ive heard and read. :S

  • MOVED: Problem with K8N Neo4 Platinum and Vista Ultimate

    This topic has been moved to Vista problems.
    https://forum-en.msi.com/index.php?topic=110040.0

    Set the Maxtor hard drive to be a Sata I instead of Sata II hard drive with a jumper.  Also make certain that the Sata controllers in Integrated Peripherals-IDE Devices Configuration are enabled.

  • MOVED: Overclocking problem with K8N Neo4 Platinum

    This topic has been moved to Overclockers & Modding Corner.
    https://forum-en.msi.com/index.php?topic=109372.0

    Quote from: BlackRaven on 27-June-07, 08:58:49
    well everything i wrote was based on the guys serial number reading ability. ill live with 2800 mhz. thanks anyway
    That's all fine and good, but not always the case. Sure, some batches/runs are better than others, and some weeks of production are just good clockers, but it is hard to tell what ANY chip will do just by looking at the markings on it. Getting 3G on stock vcore would be almost unheard of - unless the chip was made to run at 3G of course. 2800Mhz isn't too bad and exactly what I run on my Brisbane 24/7.
    The only real way to know what any chip will do, IMO, is to buy from someone who has abused already tried it 

  • Vista Sound problems with K8N Neo4 SLI Platinum

    I wonder if anyone have gotten the sound to work under 32-Bit Vista RC1 (build 5600) on the K8N Neo4 Platinum SLI (MS-7100)? Installation of the, by MSI, provided XP driver (Creative_audio_32-64bit.zip) seam to work, and the device looks installed in Device Manager, but still no sound... Also, the icon for volume control in the icon trey detects that there is no sound card installed.
    Anyone with a similar problem? Any solutions? Suggestions?
    Thanks in advance!
    Br
    Daniel

    Thanks!
    I did try one of these drivers before without success. Now when I tried the old driver from nov 2005 it worked!
    Drivers are found here:
    (http://se.europe.creative.com/support/downloads/download.asp?MainCategory=1&nRegionFK=&nCountryFK=&nLanguageFK=&sOSName=Windows+Vista+32-bit&region=3&Product_Name=Live%21+24-bit&Product_ID=10315&modelnumber=&driverlang=1033&OS=26&drivertype=1&x=17&y=9)

  • Firewire/1394 devices are not auto-detected with k8n neo4 platinum

    I am unable to detect firewire/1394 devices to my PC through my K8N Neo4 Platinum. That is, I plug in the device through the firewire port and windows doesn't detect that a device has been plugged in.
    I have tried:   
    -2 firewire devices, both are Canon digital camcorders (ZR10 and ZR25MC)
    -2 different firewire cables
    -reinstalling windows, got all windows updates except
    (Microsoft Base Smart Card Cryptographic Service Provider Package: x86 (KB909520))
    -patch from microsoft, discussed here
    (https://forum-en.msi.com/index.php?topic=81749.0)
    -both firewire devices using both cables connect just fine to a test computer
    -both my computer and the test computer have Windows XP Pro SP2
    Windows doesn't make the noise "bah-dum" that it has detected a device, nor does it display the dialog that gives me options of what programs to use. Once in a while, if I leave it connected for a while and come back, windows will eventually find it...or windows might bog down and get really slow. It speeds up again instantly once I unplug the firewire device. Strange, I know. Also there are NO conflicts in device manager.
    Could it be?: 
    -bios misconfiguration
    -need to use an older chipset driver (i am using most recent from nvidia.com)
    -onboard audio or front audio needs to be disabled
    -the k8n neo4 platinum simply has connection problems with some firewire devices
    (i hope not)
    Bob

    Built2Last: (good questions!)
    I tried your suggestion by removing PCI cards and made FURTHER progress. I found out that my firewire card, the Syba NEC1394-P3, has some compatibility issues with my other PCI cards. I found this out because:
    1. it worked fine after I placed it in a non-comm (orange) slot and removed my soundcard (X-Fi) and Belkin wireless modem, and
    2. a tech support representative from Syba told me that that particular firewire card has compatibility issues
    Quote
    Also, SD-NEC-4F is our older model firewire card.
    Our new firewire card (SD-PCI-4F) is using VIA VT6306 chipset and no customer complain about any installation issue so far.
    If the SD-NEC-4F still giving you trouble, I'll suggest you to return it and exchange for the SD-PCI-4F firewire card.
    At least he is honest and wants to help, so I remain impartial towards Syba.
    So I figured out the firewire card, but not the onboard firewire. Ok, but check this out! When the Syba card was working, I could plug in BOTH the external hard drive AND either of the Canon camcorders to the Syba firewire card. Windows all three devices just fine. Again, the onboard firewire would ONLY detect JUST the external hard drive, but would not detect either of the Canon camcorders. It seems as though the ball again is knocked back into MSI's court on this issue. Any ideas?
    syar2003:
    As for drivers, I checked for drivers for: onboard firewire, add-in firewire card, and Canon camcorders.
    -I cannot find where there is an MSI firewire driver for my onboard firewire port. I originally guess that it was part of my chipset driver installer, but the README doesn't say anything about it. It is also not an additional download on MSI's website. But since it detects an external hard drive I figure I must already have it.
    -The add-in firewire card does not have drivers. I repeat, they do not exist. The manual and Syba's website both state that drivers for the card are included all versions of Windows back to Windows 98.
    -Canon's website has a driver/software download page but it also appears that drivers do not exist for the Canon camcorders.
    Yes the camcorder is set to VCR mode.
    Yes the IEEE1394 is correctly installed, since external hard drive connects okay.
    I tried two DV cables and both are connected fine.
    The camcorders do not support USB as far as I can see, and if they do, I'm not using it.

  • Problem replacing K8n Neo4 Platinum

    Hello everybody, this is my first post here, I am a new member from Italy.
    I have this problem:
    I own a K8n Neo4 Platinum and when I changed the VGA from Nvidia 6600 GT to 8600 GTS the Mobo doesn't post anymore.. The usb diagnostig bracket says it's a memory problem but when I've put my memory banks on a different PC, they work just fine.
    I think the problem was caused by the little space that I had between the VGA and the chipset cooler (Zalman passive);when I installed the VGA I damaged the chipset. Taking a closer look at it I noticed that 1 edge is damaged. I also substituted the Power suplly but the result is always the same.
    So I decided to replace the mobo but I don't want to reinstall windows. Finding my same mobo is impossible here in Europe. I only found the K8n Neo4-F.
    My question is the following :
    -Does this Mobo use the same drivers that were installed on my HD? (latest driver downloaded  from Nvidia version 6.86)
    -Will I have problems with Windows ?

    Massi186,
    Moan Guide
    Richard

  • Strange power-on (issue?) with K8N Neo4 Platinum

    Hi all, i have a new K8N Neo4 Platinum, non-sli.
    My rig:
    A643000+ winch, no overclock
    2x512MB Corsair XMS DDR400MHz
    2x200GB Seagate mirroring
    Plextor PX-708A
    BenQ DVD Burner
    AN OLD Matrox Mystique 4MB PCI  (new pci-e gfx card later...)
    A powerfull enermax coolergiant 600W ATX 2.0 power supply
    Latest official nforce4 drivers and bios
    It seems to be ok: installed winXP pro sp2 and updates, installed two Seagate in raid-mirroring with the nforce4 controller, installed some progs and utils, firewall is ok, prime95 go without problems for 1 our (more tests later), cpu temp is 34°C and sys temp is 30°C.
    CoreCenter Say:
    Vcore -> 1.41V
    3.3V -> 3.39V
    +5V -> 5.13V
    +12V -> 12.26V
    memory volt -> 2.60V
    FSB -> 200MHz
    PCI-E -> 100MHz
    cpu volt -> By-VID
    Apparently no weird things...
    When i switch-on the Pc, for some seconds(  ̃10 secs) it don't want to boot, optical drives blink repeatly and the screen is blank, like a bad overclock... But the machine isn't overclocked, and the bios is ok, i think. After 10 secs, finally it go and run flawlessly, post and other things are ok. When i reboot in win, the 10secs-issue repeat itself. So this strange thing at the post is normal? Anyone with the same "problem"? For now the rig is ok when it logon in winXP...

    Hi all my friends 
    @JER101 >>> Ehrr i mean post, sorry 
    I had unplugged the optical drives, but the problem persist. When plugged, they blink for some times and after blinking the machine go into post-phase and after it boot in the correct manner. I think the PCI card is the problem, like some of you said... I will buy one pci-e card (obviously), but i hope things are not dangerous for now 
    In the mean time, i have a new problem: emule+firewall=BSOD. I know, there are tons of post about this issue around, but the solution is unclear... Tried to disable DEP, patched WinXP SP2 with latest things from winupdate, but nothing work for me, emule and the firewall generate a crash&reboot. Tried with the Marvell LAN, too, without success.
    Any suggestions? Usefull links? If i uninstall the "NVIDIA Forceware Network Access Manager" it will work without problem with a thirdy part firewall, like sysgate?
    P.S.
    What's the problem with nvidia drivers? C'mon nvidia, solve this damned issue! 

  • IDE cables bundled with K8N Neo4 Platinum--80 wire or 40 wire?

    Is the rounded IDE cable that comes with the K8N Neo4 Platinum (non-SLI) mobo an 80 wire or 40 wire cable?  How can one tell?
    I think I may be having some UDMA issues with my second hard drive (120GB Barracuda 7200.7 IDE).  I installed XP on my SATA drive with no other drives connected and then added this IDE drive.
    The rest of my setup is in my sig.
    Thanks!
    Bruce

    OK.  I checked my device manager for the info on my IDE drive.  I looked at the properties of NVIDIA nForce4 Parallel ATA Controller.
    Primary Channel:
    HD Model # is ST3120026A.  The drive set up as Ultra DMA 5 - Ultra 100.  Checked boxes are "Let BIOS select transfer mode, Enable read caching, and Enable write caching.  I did a speed test from Windows and it shows Theoretical limit of 100, Burst speed of 86.3 and Sustained speed of 58.1.
    Secondary Channel:
    DVD: _NEC DVD_RW ND-3540A.  Transfer mode is Ultra DMA2 - Ultra 33.  This is using a flat ribbon cable from an older computer.  The only box checked is "Let BIOS select transfer mode".
    Do these both look OK or do I need to change something?
    Then I looked at the properties of NVIDIA nForce4 ADMA Controller and found:
    My SATA drive (my boot drive) is HD model # ST3160812AS.  Transfer mode is PIO Mode.  Boxes checked are "Enable read caching, Enable write caching, and Enable command queuing.  There is a yellow triangle that says "Transfer mode downgraded".  I can't do a speed test.
    What do I need to do to operate in Serial ATA Generation 2 - 3G?  This is how this drive is supposed to operate.
    Thanks!
    Bruce

  • Building system for friend with K8N Neo4 Platinum

    MSI K8N Neo4 Platinum
    AMD Athlon 64 3200+ Venice (ADA3200CGBOX)
    CT2KIT12864Z40B (2x1GB)
    eVGA 256-P2-N516 (7800GT)
    WD2500KS (250GB SATAII HDD)
    ATXA9N-SS/500 (Case)
    Aspire 120MM
    Aspire 80MM
    ND-3550A (DVD-RW)
    TG-480-U22 (PSU)
    Can anyone recommend BIOS and drivers I should preload to a CD?  I would rather not install from retail CDs only to download new ones.
    Are there any other concerns or things I should know of?
    Thanks!

    Quote from: Kwea on 10-January-06, 23:21:38
    MSI K8N Neo4 Platinum
    AMD Athlon 64 3200+ Venice (ADA3200CGBOX)
    CT2KIT12864Z40B (2x1GB)
    eVGA 256-P2-N516 (7800GT)
    WD2500KS (250GB SATAII HDD)
    ATXA9N-SS/500 (Case)
    Aspire 120MM
    Aspire 80MM
    ND-3550A (DVD-RW)
    TG-480-U22 (PSU)
    Can anyone recommend BIOS and drivers I should preload to a CD?  I would rather not install from retail CDs only to download new ones.
    Are there any other concerns or things I should know of?
    Thanks!
    You can use CD drivers (if needed to get connected to net) and update. because of the item on CD will be out dated
    I'am using V1.09 BIOS, Nforce 666, GFX 7772 works good for me

  • K8N NEO2 Platinum Nvidia Ethernet Issue

    Hello,
    My On-board Nvidia Ethernet controller is detected by Windows in the device manager, however when I go to view Network Connections there is no entry for the Nvidia Ethernet.  When I ran ipconfig it returned the following for the connection:
    Ethernet adapter {3E28B538-39E2-4C17-A90A-4BB348EE07ED}:
            Connection-specific DNS Suffix  . :
            Autoconfiguration IP Address. . . : 169.254.254.183
            Subnet Mask . . . . . . . . . . . : 255.255.0.0
            IP Address. . . . . . . . . . . . : fe80::211:9ff:fe99:b341%7
            Default Gateway . . . . . . . . . :
    I am running Windows XP SP2 with an AMD 64 3200, 1GB of RAM and a 6800 video card.
    Any help would be greatly appreciated!
    Thanks!
    -sharkmont

    Quote from: h4nc0 on 03-July-05, 23:27:34
    v1.9b6?  Where do I get that?
    I'm waiting for the official released BIOS. Does MSI realy want to provide us BIOS for supporting E3 and X2? AMD already announced these model for a while. Didn't MSI get any engineer sample from AMD for new BIOS development?

  • LAN problem on K8N Neo4 Platinum

    Hello all,
    I am trying to build a system using this setup:
    -MSI K8N Neo4 nforce4 Ultra Plat
    -AMD 64 3700+ (san diego)
    -Corsair XMS DDR400 Twinx1024mb-3200c2pt
    -evga Gefocre 6800GS
    -WD 74GB raptor (main drive)
    -WinXP Pro
    -Antec SP-400 PSU
    -Samsung DVD/CD-RW
    I have searched the forums completely and have been trying every suggested method to get the onboard LAN to work.  Both ports are not working.  I have updated the chipset drivers, Lan drivers for each, updated the bios, tried disabling the Giga lan port and just using the Nvidia, etc...  Nothing seems to be working. 
    The connection states that it is connected and it shows an IP address but there is no DNS or Gateway and it will not connect to the internet or download updates for Kaspersky.
    Any guidance would be greatly appreciated.  Thanks!

    Your cables in order?
    Hm,so they do appear in hardware manager correctly?
    And drivers are installed etc.?
    Do you see any led activity from the Lan connectors at the rear of your pc case?
    Now the following could be different for each provider,but my modem gets a standard ipnumber if my modem can't connect to my provider,when the connection does happen it shows a 10.xxx.xx.xx number and after that my real ipnumber gets assigned.
    So when no signal is received I don't get the 10.xxx number but the default one.And ofcourse no DHCP in this case.
    Also with my cable modem the number from my ethernet device is memorized and linked to my account,so when I build this system I had to go to a certain web page from my provider to fill in the new number from my Lan device(provisioning page),after this was done I had to reboot the cable modem and now my Lan connection was linked to my CPE MAC Address from modem and internet worked.
    There is a basic test you can use to check if your modem is detected correct by the pc and your cables and setup is in order.
    Go to your web browser and type   http://192.168.100.1/  this will show if your Lan is communicating with the modem.
    If this all seem to work you have a problem before the modem,or the modem itself is defect.In these cases contact your provider.
    It would help if you could provide the modem type and connection type (dsl or cable) because what I just wrote applies to cable modems.Also check if your network cable is the correct one,you don't want a crossed cable for your connection.
    ps. you could type in the command prompt (start\execute) ipconfig/all
    this shows the current adress of your Lan devices.It's called physicall adress.

  • CPU cooler that works with K8N Neo4 Platinum/SLI motherboard

    I have read that some say the Zalman interferes on this board with the 1, and 2 ram slots, is this true?  I'm using the 3500 Winchester CPU.
    Does someone have a part number if the Zalman is;   a)  the best, and  b) clears properly.
    Also I see everyone talking about Artic Silver 5.  What does the"5" mean?  I have Artic Silver that I have been using for about 2 years, but there iis no designation "5".  Do I need the new stuff?
    Thanks

    I don’t know muck about artic silver, but I have a comment on the cpu-cooler question.
    I recently bought a K8N SLI Platinum, which has an almost identical layout as the Neo4 Platinum. I use a Termalright XP 120 cooler which according to there webpage does not fit on this board. But I didn’t had much problem at all! It is tight with the first ram slot thaw, and with a memory just a few millimetres higher than mine it wouldn’t fit (I use TwinMOS PC3200).
    Unfortunately, I don’t know if it’s a similar situation with the Zalman coolers, but I really like to recommend the XP120 (or even XP80) anyway. It keeps my cpu (althorn 3000+) at almost the same temp as the sounding system, during normal use. And since you are free to put any fan you like, you have a very good start making your system really quiet.

Maybe you are looking for

  • Cannot deploy soa app from jdev, cannot find soa server

    I installed/configured weblogic server, SOA, OSB, BAM. I started admin server, I created a managed server for soa: soa_server1, and started the managed server successfully. I opened weblogic console and see soa_server1 is running. I started EM, and s

  • My HP 8250 will no tprint photos from iphoto

    Hi, I am a new Mac owner and waited until the new dual core imac came out because I wanted the best computer Apple offered. I also purchased a new HP Photosmart 8250 to go along with it because the imac would not work with my older HP photo printer.

  • Netweaver administration and SAP Web Application Server r the same?

    Hi All, I am a Basis Consultant & new to Netweaver,.. I am interested in Netweaver administration.. 1.I am confused wheather netweaver administration and SAP Web Application Server r the same?(or WAS is just another component of Netweaver). 2.Do we n

  • Why won't my speakers work?

    I got my MacBook about a month ago and it has been wonderful, but now, when I open the lid, if I try to play music or anything, it's like it's muted, but, it isn't and the only other experience I've had with something like this is that once my iPhone

  • The problem about MouseListener,MouseMotionListener

    When I compile my program I face a problem with the compiled informatioin: XYZApp.java:137: DisplayPanel should be declared abstract; it does not define mouseDragged(java.awt.event.MouseEvent) in DisplayPanel class DisplayPanel extends JPanel impleme