Download problems with Oracle 9i

So that we may better diagnose DOWNLOAD problems, please provide the following information.
- Server name : http://download-east.oracle.com
- Filename : 92010NT_Disk1.zip, 92010NT_Disk2.zip, 92010NT_Disk3.zip
- Date/Time : 15 Aug 2002
- Browser + Version : IE 5.x, Netscape 4
- O/S + Version : MS Windows 98/2000
- Error Msg
I have been trying to download Oracle 9i for the past three weeks. Every time I try to download the above mentioned files the file Login.jsp gets copied. I've tried using both GetRight and GoZilla!
Could someone please advise me what to do. Any help would be appreciated.

I recently downloaded Oracle9i personal edition, it took me more than 7 hours, and the downloaded zip file is A91514-01.zip. You need to check how reliable is your internet connection. regards. winston

Similar Messages

Problem with Oracle 11g(32 bit) installation on windows 7 ultimate edition

Hello all,
I have a problem with Oracle 11g(32 bit) installation on windows 7 ultimate edition (32 bit).
I have successfully installed it immediately after OS installation. But today, i have decided to deinstall it and go for Oracle 10g version for 32 bit.
Everything went normal during installation, but i can see the services is not present in services.msc. Also its throwing some exception for dbca, netca
Now i tried to deinstall it and again go for 11g. But even the same story here..
Can anybody give me a solution for this..
-Regards
Rajesh Menon

Saqib Alam wrote:
i recently install Oracle 11g R1 on windows 7 ultimate, i installed it and working perfectly.
ur problem is that u install latest version and now u trying to installing old version.
now u need to uninstall 10g and delete oracle from services, if the probleme presist then u should
install fresh windows 7.
Regards
SaqibNo need to install a fresh OS. That's like tearing your house down just because you wired a lamp wrong and blew a circuit breaker.
There are MeaLink notes on how to eradicate an Oracle install from Windows, but it boils down to this:
Stop all Oracle services
In the registery:
- Delete all oracle services from the register (HKLM\SYSTEM\CurrentControlSet
- Delete the entire Oralce folder from HKLM\Software
reboot
Delete the ORACLE_HOME directory and any other Oracle related directories/files. Offhand, it seems like there is an Oracle directory under Program Files.
reboot

A lot of problems with Oracle BI SEE 11g

I have a lot of problems with Oracle BI SEE 11g
1. I upgraded my BI SEE 10 repository and can it openning in offline mode.
2. I can't deploy my upgraded repository in EM MW Control 11g - when i try to open Farm_bifoundation_domain->Business Intelligence->coreapplication, i get error "Stream closed
For more information, please see the server's error log for an entry beggining with: Server Exception during PPR, #41".
Opening Logs by EM control doesn't work too.
in file middleware\user_projects\domains\bifoundation_domain\servers\AdminServer\logs\AdminServer.log i see this event:
<Error> <HTTP> <oratest.itera.ru> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <b639ac3e56e9a463:bd6fa7f:12ac7271e09:-8000-00000000000009e8> <1283408423378> <BEA-101019> <[ServletContext@329875093[app:em module:/em path:/em spec-version:2.5]] Servlet failed with IOException
java.io.IOException: Stream closed
Have you any ideas?
3. Ok, i taking sample repository and adding a new datasource in it:
Database: Oracle 8i
Connection pool:
Call interface OCI 8i/9i
Data source name:
(DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP) (Host = oraapp) (Port = 1521) ) ) (CONNECT_DATA = (SID = MYSID) ) )
This settings are working fine in BI 10.
In BI 11g i get this funny error: "The connection has failed". I lost my time in attempts to connect to Oracle DB 8, but have not results. After that i hacked button "Query DBMS" at "Features" tab, pressed it and when get error "ORA-03134: Connections to this server version are no longer supported.".
Therefore Oracle 8 DB as datasource not supported. Am i right?
4. In sample repository i added oracle DB 10 as datasource, then added two dual tables and their connection to all layers.
Now i open BI Answers, and trying to create report with one dummy column, Now i have this error:
Error
View Display Error
Odbc driver returned an error (SQLExecDirectW).
Error Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 42016] Check database specific features table. Must be able to push at least a single table reference to a remote database (HY000)
SQL Issued: SELECT s_0, s_1 FROM ( SELECT 0 s_0, "ORA10G"."dual"."dummy" s_1 FROM "ORA10G" ) djm
Database features are defaults.
Does anyone solve this problem?

Turribeach, Thanks for you time.
1. It was not a question
3. Yes, i have read platforms, but not supported datasources. Now i see, that BI 11g support as datasource Oracle DB 9.2.0.7 or higher. I am sorry.
4. I'm using OCI connection type
Now i recreate Database in Physical schema and answers is showing report data for me! But only from one table, when i use columns from to tables from one datasource, i geting error:
Error View Display Error Odbc driver returned an error (SQLExecDirectW). Error Details Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 46008] Internal error: File server/Utility/Server/DataType/SUKeyCompare.cpp, line 875. (HY000) SQL Issued: SELECT s_0, s_1, s_2 FROM ( SELECT 0 s_0, "Ora10g"."hierarchy_obj_cust_v"."sort_order" s_1, "Ora10g"."NSI_SCHEMA"."SCHEMA_NAME" s_2 FROM "Ora10g" ) djm
Edited by: serzzzh on 03.09.2010 3:44

Problem with oracle.jbo.domain.Date

Hi there,
I've a problem with oracle.jbo.domain.Date,
I'm doing this code (this part of code is used in my Session Attribute Listener):
* This method is used to add the session id in the database, whenever user login
public void attributeAdded(HttpSessionBindingEvent hsbe){
if(!hsbe.getName().equals("user")){
return;
AmLogin am = (AmLogin)Configuration.createRootApplicationModule(
"com.ahm.pdt001.am.AmLogin",
"AmLoginLocal");
try{
hsbe.getSession().setAttribute("login", new Date(new Timestamp(
System.currentTimeMillis())));
am.createLogin(hsbe.getValue().toString(), hsbe.getSession().
getAttribute("login").toString());
} catch(Exception e){
e.printStackTrace();
System.out.println("Error insert data user: " + hsbe.getValue());
} finally{
Configuration.releaseRootApplicationModule(am, true);
Everything is running well in Jdev 10.1.3 (I'm using ADF Faces technology), and I'm trying to deploy it on OC4J 10.1.2 and it works. But it raised an error when this part of code is runned.
--------------caused and error------------------------
hsbe.getSession().setAttribute("login", new Date(new Timestamp(
System.currentTimeMillis())));
And this is an error:
javax.faces.FacesException: #{pdt001.loginAction}: javax.faces.el.EvaluationException: java.lang.NoSuchMethodError: oracle.jbo.domain.Date.<init>(Ljava/sql/Timestamp;)V at com.sun.faces.application.ActionListenerImpl.processAction(ActionListenerImpl.java:78) at oracle.adf.view.faces.component.UIXCommand.broadcast(UIXCommand.java:211) at javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:267) at javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:381) at com.sun.faces.lifecycle.InvokeApplicationPhase.execute(InvokeApplicationPhase.java:75) at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:200) at com.sun.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:90) at javax.faces.webapp.FacesServlet.service(FacesServlet.java:197) at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.0)].server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65) at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:332) at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.0)].server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:16) at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl._invokeDoFilter(AdfFacesFilterImpl.java:367) at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl._doFilterImpl(AdfFacesFilterImpl.java:336) at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl.doFilter(AdfFacesFilterImpl.java:196) at oracle.adf.view.faces.webapp.AdfFacesFilter.doFilter(AdfFacesFilter.java:87) at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.0)].server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:20) at com.ahm.filter.AhmFilterSession.doFilter(AhmFilterSession.java:45) at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.0)].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:645) at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.0)].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:322) at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.0)].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:790) at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.0)].server.http.HttpRequestHandler.run(HttpRequestHandler.java:270) at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.0)].server.http.HttpRequestHandler.run(HttpRequestHandler.java:112) at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.0)].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186) at java.lang.Thread.run(Thread.java:534)Caused by: javax.faces.el.EvaluationException: java.lang.NoSuchMethodError: oracle.jbo.domain.Date.<init>(Ljava/sql/Timestamp;)V at com.sun.faces.el.MethodBindingImpl.invoke(MethodBindingImpl.java:130) at com.sun.faces.application.ActionListenerImpl.processAction(ActionListenerImpl.java:72) ... 23 moreCaused by: java.lang.NoSuchMethodError: oracle.jbo.domain.Date.<init>(Ljava/sql/Timestamp;)V at com.ahm.pdt001.listener.Pdt001AttributeSessionListener.attributeAdded(Pdt001AttributeSessionListener.java:27) at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.0)].server.http.EvermindHttpSession.setAttribute(EvermindHttpSession.java:128) at com.ahm.pdt001.bean.Pdt001Bean.loginAction(Pdt001Bean.java:61) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sun.faces.el.MethodBindingImpl.invoke(MethodBindingImpl.java:126)
Does anybody have the same problem like this? I've used the same method in my previous project to create oracle.jbo.domain.Date with current time using java.sql.Timestamp, but I don't know why this error happened.
Thx,
Andre

Re: oracle jbo.domain.Date issues in 10.1.3
Sascha

Please Help: A Problem With Oracle-Provided 'Working' Example

A Problem With Oracle-Provided 'Working' Example Using htp.formcheckbox
I followed the simple steps in the Oracle-provided example:
Doc ID: Note:116534.1
Subject: How to use checkbox in webdb for bulk update using webdb report
However, when I select a checkbox and click on the Update button, I get a "ORA-01036: illegal variable name/number" error. Please advise. This was a very promising feature.
Fred
Below are step-by-step instructions provided by Oracle to create this "working" example:
How to use a checkbox in WEBDB 2.2 report for bulk update.
PURPOSE
This article shows how checkbox can used placed on WEBDB report
and how to use it.
SCOPE & APPLICATION
The following example to guide through the steps to create a working
example of this.
In this example, the checkbox is used to select the records. On clicking
the update button, the pl/sql procedure is called which will update col1 to
the string 'OK'.
After the update is done, the PL/SQL procedure calls the report again.
Since the report only select records where col1 is null, the updated
records will not be displayed when the report is called again.
Step 1 - Create Table
From Sqlplus, log in as scott/tiger and execute the following:
drop table chkbox_example;
create table chkbox_example
(id varchar2(10) not null,
comments varchar2(20),
col1 varchar2(10));
Step 2 - Insert Test Data
From Sqlplus, still logged in as scott/tiger , execute the following:
declare
l_i number;
begin
for l_i in 1..50 loop
insert into chkbox_example values (l_i, 'Comments ' || l_i , NULL);
end loop;
commit;
end;
Step 3 -Create SQL Query based WEBDB report
Logon to a WEBDB site which has access to the database the above tables are created.
Create a SQL based Report.
Name the report :RPT_CHKBOX
The select statement for the report is :
select c.id, c.comments, c.col1,
htf.formcheckbox('p_qty',c.id) Tick
from SCOTT.chkbox_example c
where c.col1 is null
In Advanced PL/SQL, (REPORT, Before displaying the form), put the following code
htp.formOpen('scott.chkbox_process');
htp.formsubmit('p_request','Update');
htp.br;
htp.br;
Step 4 - Create a stored procedure in the database
Log on to the database as scott/tiger and execute the following to create the
procedure.
Note: Replace WEBDB to the appropriate webdb user for your installation.
In my database, I had installed webdb using WEBDB username, hence user webdb owns
the packages.
create or replace procedure chkbox_process
( p_request in varchar2 default null,
p_qty in wwv_utl_api_types.vc_arr ,
p_arg_names in wwv_utl_api_types.vc_arr ,
p_arg_values in wwv_utl_api_types.vc_arr
is
i number;
begin
for i in 1..p_qty.count loop
if p_qty(i) is not null then
begin
update chkbox_example
set col1 = 'OK'
where chkbox_example.id = p_qty(i);
end;
end if;
end loop;
commit;
/* To Call Report again after updating */
SCOTT.RPT_CHKBOX.show
(p_request=>'Run Report',
p_arg_names=>webdb.wwv_standard_util.string_to_table2(' '),
p_arg_values=>webdb.wwv_standard_util.string_to_table2(' '));
end;
Summary
There are essentially 2 main modules, The WEBDB report and the pl/sql procedure (chkbox_process)
A button is created via the advanced pl/sql coding which shows on top of the report. (The
button cannot be placed at the bottom of the report due to the way WEBDB creates the procedure
internally)
When any button is clicked on the report, it calls the pl/sql procedure chkbox_process.
The procedure is called , WEBDB always passes the parameters p_request,p_arg_names and o_arg_values.
p_qty is another parameter that we are passing additionally, This comes from the checkbox created
using the htf.formcheckbox in the report select statement.
The pl/sql procedure calls the report again after processing. This is done to
show how to call the report.
Restrictions:
-The Next and Prev buttons on the report will not work.
So it is important that the report can fit in 1 page only.
(This may mean that you will not select(not ticked) 'Paginate' under
'Display Option' in the WEBDB report. If you do this,
then in Step 4, remove p_arg_names and p_arg_values as input parameters
to the chkbox_process)

If your not so sure you can use the instanceof
insurance,
Object o = evt.getSource();
if (o instanceof Button) {
Button source = (Button) o;
I haven't thoroughly read the thread, but I use something like this:if (evt.getSource() == someObjRef) {
// do that voodoo
]I haven't looked into why you'd be creating a new reference...

Remote JDBC Problem with Oracle BPM Studio

Hi all, i am facing the Remote JDBC Problem with Oracle BPM Studio.
When i configure a Remote JDBC Connection for SQL in BPM Studio, it prompt me an error.
The SQL Connection is configured as following :
External Resource:
Name : MyDS
Type : SQL Database
Supported Types : Remote JDBC
Details:
Database Type : BPM's Oracle Driver Version:10, 11
J2EE : WLS
Lookup Name : MyAppDS
Configuration for "WLS"
Name : WLS
Type : J2EE Application Server
Supported Types : GENERIC_J2EE
Details:
Initial Context Factory : weblogic.jndi.WLInitialContextFactory
URL : t3://localhost:7001
But, when i try to connect to the Database by using this configuration, I will get an Exception.
An exception occurred while getting a resource from a connector.
Detail:The connector [[ MyDS : SQL : REMOTE_JDBC ]] caused an exception when getting a resource.
Caused by: An exception occurred while getting a resource from a connector.
Detail:The connector [[ WLS : J2EE : J2EE ]] caused an exception when getting a resource.
Caused by: javax.naming.NoInitialContextException: Cannot instantiate class: weblogic.jndi.WLInitialContextFactory [[ Root exception is java.lang.ClassNotFoundException: weblogic.jndi.WLInitialContextFactory ]]
     at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:657)
     at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:288)
     at javax.naming.InitialContext.init(InitialContext.java:223)
     at javax.naming.InitialContext.<init>(InitialContext.java:197)
     at fuego.jndi.FaultTolerantContext.createContext(FaultTolerantContext.java:726)
     at fuego.jndi.FaultTolerantContext.<init>(FaultTolerantContext.java:79)
     at fuego.connector.impl.GenericJ2EEConnector.createInitialContext(GenericJ2EEConnector.java:177)
     at fuego.connector.impl.GenericJ2EEConnector.createStandaloneContext(GenericJ2EEConnector.java:98)
     at fuego.connector.impl.BaseJ2EEConnector.getResource(BaseJ2EEConnector.java:92)
     at fuego.connector.impl.BaseJ2EEConnector.getResource(BaseJ2EEConnector.java:76)
     at fuego.connector.J2EEHelper.getReadOnlyContext(J2EEHelper.java:86)
     ... 12 more
Edited by: user2262377 on Jun 22, 2009 4:01 PM

I guess the weblogic.jar is not included in the studio.
So, i added weblogic.jar (Weblogic 10.3) and wlclient.jar (Weblogic 10.3)
It is working in my simple java code. But, still not working in BPM Studio.
The error logs:
An exception occurred while getting a resource from a connector.
Detail:The connector [OFT_APP_DS:SQL:REMOTE_JDBC] caused an exception when getting a resource.
Caused by: java.lang.Object cannot be cast to java.io.Serializable
fuego.connector.ConnectorException: An exception occurred while getting a resource from a connector.
Detail:The connector [OFT_APP_DS:SQL:REMOTE_JDBC] caused an exception when getting a resource.
     at fuego.connector.ConnectorException.exceptionOnGetResource(ConnectorException.java:88)
     at fuego.connector.JDBCHelper.getReadOnlyConnection(JDBCHelper.java:93)
     at fuego.sqlintrospector.BrowserPanel.connect(BrowserPanel.java:395)
     at fuego.sqlintrospector.BrowserPanel.populateTree(BrowserPanel.java:200)
     at fuego.ui.wizards.ui.CheckTreeBrowser$1.construct(CheckTreeBrowser.java:63)
     at fuego.ui.SwingWorker$2.run(SwingWorker.java:39)
     at java.lang.Thread.run(Thread.java:619)
Caused by: java.lang.ClassCastException: java.lang.Object cannot be cast to java.io.Serializable
     at weblogic.iiop.IIOPOutputStream.writeAny(IIOPOutputStream.java:1588)
     at weblogic.iiop.IIOPOutputStream.writeObject(IIOPOutputStream.java:2231)
     at weblogic.utils.io.ObjectStreamClass.writeFields(ObjectStreamClass.java:413)
     at weblogic.corba.utils.ValueHandlerImpl.writeValueData(ValueHandlerImpl.java:235)
     at weblogic.corba.utils.ValueHandlerImpl.writeValueData(ValueHandlerImpl.java:225)
     at weblogic.corba.utils.ValueHandlerImpl.writeValue(ValueHandlerImpl.java:182)
     at weblogic.iiop.IIOPOutputStream.write_value(IIOPOutputStream.java:1963)
     at weblogic.iiop.IIOPOutputStream.write_value(IIOPOutputStream.java:2001)
     at weblogic.iiop.IIOPOutputStream.writeObject(IIOPOutputStream.java:2266)
     at weblogic.jdbc.common.internal.RmiDataSource_WLSkel.invoke(Unknown Source)
     at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:589)
     at weblogic.rmi.cluster.ClusterableServerRef.invoke(ClusterableServerRef.java:230)
     at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:477)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
     at weblogic.security.service.SecurityManager.runAs(Unknown Source)
     at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:473)
     at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)

Logon problem with oracle management server

I have problem with Oracle Management Server when I connect to the OMS message comes
The exception (java.lang.NullPointerException) occurred.
if any body have any idea pls tell us

Hi,
Oracle has changed the Enterprise Manager from version 1.5 to 2.0 .
With the new Oracle8i dataase server another service has been added.
If you want to user the OEM you have to install The Managment Server.
The Managment server has its own user and privileges and is recommended when using OEM.

Performance problem with Oracle

We are currently getting a system developed in Unix/Weblogic/Tomcat/Oracle environment. We have developed a screen that contains 5 or 6 different parameters to select from. We could select multiple parameters in each of these selections. The idea behind the subsequent screens is to attach information to already existing data/ possible future data that matches the selection criteria.
Based on these selections, existing data located within the system in a table is searched and those that match are selected. Also new rows are created in the table against combinations that do not currently have a match. Frequently multiple parameters are selected, and 2000 different combinations need to be searched in the table. Of these selections, only about 100 or 200 combinations will be available in existing data. So the system is having to insert 1800 rows. The user meanwhile waits for the system to come up with data based on their selections. The user is not willing to wait more than 30 seconds to get to the next screen. In the above mentioned scenario, the system takes more than an hour to insert the new records and bring the information up. We need suggestions to see if the performance can be improved this drastically. If not what are the alternatives? Thanks

The #1 cause for performance problems with Oracle is not using it correctly.
I find it hard to believe that with the small data volumes mentioned, that you can have perfornance problems.
You need to perform a sanity check. Are you using Oracle correctly? Do you know what bind variables are? Are you using indexes correctly? Are you using PL/SQL correctly? Is the instance setup correctly? What about storage, are you using SAME (RAID10) or something else? Etc.
Facts. Oracle peforms exceptionally well. Oracle exceptionally well.
Simple example from a benchmark I did on this exact same subject. App-tier developers not understanding and not using Oracle correctly. Incorrect usage of Oracle doing a 100,000 SQL statements. 24+ minutes elapsed time. Doing those exact same 100,000 SQL statement correctly (using bind variables) - 8 seconds elapsed time. (benchmark using Oracle 10.1.0.3 on a Sunfire V20z server)
But then you need to use Oracle correctly. Are you familiar with the Oracle Concepts Guide? Have you read the Oracle Application Developer Fundamentals Guide?

Problems with oracle 9i installation in windows xp

I am having a problem with oracle 9i installation. I am getting error message like this "jrew.exe has encountered a problem and nees to close" can any body tell how to overcome this problem. I have cleaned registry also. I uninstalled java runtime environment and again installed java but i am still getting the message.

Hi Madhu,
The problem seem the "jrew.exe" file may be currupted.
Remove the file "jrew.exe" and try to reinstall Oracle.
Regards,
RKumar

Problem with Oracle Designer 10

Hi,
I have a problem with Oracle Designer 10 version 9.0.4.7 installed in Windows 2000 platform.
I don't know if the origin of the problem is at the server side or client side. I try to launch the repository reports but it doesn't work. The screen never appear. I have to finish the client process but the oracle session remmains:
SID SERIAL# LOGON_TIME PROGRAM
============================
36 13137 01-12-2008 des2k61.exe
38 15583 01-12-2008 ckrpt61.exe
The second line belongs to repository report process.
I have to kill Oracle session manually. Do you know if the problem is in the server side or client installation??
SGA VALUES
=============================
Total System Global Area 320302432 bytes
Fixed Size 736608 bytes
Variable Size 285212672 bytes
Database Buffers 33554432 bytes
Redo Buffers 798720 bytes
Client values
=============================
1Gb RAM
Windows 2000 SP4
3Gb Virtual Mem
2 GHz AMD
Thanks in advance.

I have two homes for oracle developer ..
old ---- C:\*DevSuite*
new -- C:\>C:\*DevSuite_1*
I have executed the below statement .........
C:\>C:\*DevSuite_1*\bin\tnsping disd9i
TNS Ping Utility for 32-bit Windows: Version 10.1.0.4.2 - Production on 09-SEP-2
010 19:29:22
Copyright (c) 1997, 2003, Oracle. All rights reserved.
Used parameter files:
C:\*DevSuite*\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)
(Host = VHRTY76.ASPNDT.NET)(Port = 1521))) (CONNECT_DATA = (SID = POU)))
OK (720 msec)
I think the new one is point to the old version 9 - sqlnet.ora and tnsnames.ora .
How to point the new one..?
Can I have two tns_admin as env variable ?
Edited by: user12045030 on Sep 9, 2010 7:12 AM

Problem with ORACLE database

Hi all,
I am facing some problem with ORACLE database while configuring one JDBC scenario in the receiver side. I have configured one JDBC scenario like FILE TO JDBC. As JDBC is at receiver side i have provided the input file with the following format ,
<root>
<StatementName1>
     <dbTableName action="INSERT">
         <table>employee</table>
          <access>
                <flag>NO</flag>
                <ID>567</ID>
         <NAME>134</NAME>
             </access>
     </dbTableName>
</StatementName1>
</root>
But in the ORACLE database all my columns are in the uppercase.
So when i have tried to send this input file to process through JDBC receiver side then i have faced the below error :
FATAL ERROR: Column 'flag' does not exist in table 'employee'
Then I have tried to check with sender side processing of JDBC adapter. By using the SQL statements as
SELECT * FROM EMPLOYEE WHERE flag='NO'
UPDATE EMPLOYEE SET Flag='YES' WHERE flag='NO'
Here it worked fine.
Now my question is,
If the same adapter is working when we are writing a query directly(sender side), then we must also allow case independence in the auto generated SQL part(receiver side).
The JDBC drivers for both SQL server and Oracle, supports the same java code, for accessing the DB, irrespective of the case of the column names.
Please clarify this doubt as soon as possible.
Thanks,
Soorya.

Hi Dharmaveer,
When I go with the following input file,
<root>
<StatementName1>
     <dbTableName action="INSERT">
         <table>EMPLOYEE</table>
          <access>
                <FLAG>NO</FLAG>
                <ID>666</ID>
                <NAME>SSS</NAME>
             </access>
         </dbTableName>
</StatementName1>
</root>
I will get the following query with succesfull processing.
INSERT INTO EMPLOYEE (FLAG, ID, NAME) VALUES (NO, 666, SSS)
when i go with this input file,
<root>
<StatementName1>
     <dbTableName action="INSERT">
         <table>EMPLOYEE</table>
          <access>
                                <flag>NO</flag>
                               <ID>777</ID>
                    <NAME>TTTT</NAME>
                    </access>
               </dbTableName>
</StatementName1>
</root>
Then i am facing this problem,
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'EMPLOYEE' (structure 'StatementName1'): java.sql.SQLException: FATAL ERROR: Column 'flag' does not exist in table 'EMPLOYEE'
Here I cant get any SQL statement as it is not successfull.
I have gone through your link but it also says to modify the column in the input file which is not possible for me. Can you please help me in this regard?
Thanks,
Soorya

Download Problem in Oracle 10.2.0.1.0

Hi,
We are trying to evaluate the following software
1. Oracle Database 10g Release 2 (10.2.0.1.0) for Microsoft Windows
2 .Oracle Database 10g Release 2 (10.2.0.1.0) for Linux x86-64
We tried many times but the files could not be downloaded completely. We could download only 500 MB whereas size on the site displayed is 750 MB (approx). We also tried it from a machine with a direct connection to the internet but that too didnot work.
Is there a problem with the file ? Could you please check and let us know.
Waiting for your reply,
Thanks & Regards,
Dipali Dandekar

Hi Dipali,
See I would like to inform you that the same file I had downloaded from the site and I got the Full File ( No problem with the file). What I suggst you is download with the high speed internet connection.
If you let me know from where you are then if it is possible from me then i will send you the CD?
Thanks & Regards
Bhavik Fuletra
(ORACLE CERTIFIED PROFESSIONAL)
UTI Technology Services Ltd.,
Disaster Recovery Center,
Hyderabad
Mobile No +91 9989000522
Resi No. +91 040 30620522

Installation Problems with Oracle 8i and Win98

Yesterday I tried installing Oracle 8i Personal Edition from CD. I completed installation up to "Database Creation in Progress", initializing phase. It stuck at 85%. The CD did not make any noise, and it stayed at 85% for 53 minutes.
Today, I downloaded Oracle 8i. It unzipped with no problem. I uninstalled, then tried to install. I got numerous .dll file errors in writing to file c.
The CPU is 500mz, 128 S-DRAM PC-133 Memory, there is 32 gig free on hard drive, Browser is IE Ver.5.5, O/S is Win 98.
Thank you
So that we may better diagnose DOWNLOAD problems, please provide the following information.
- Server name
- Filename - psoracle81798
- Date/Time 02/08/02 10:05 am EST
- Browser + Version - I.E. Ver 5.5
- O/S + Version WIN98
- Error Msg: Error in writing to file C

Change Compiler to egcs 1.1.2-24.
Try again.

Download problems with 10.1.3 JDeveloper

Has anyone else had problems with downloading the new version of JDeveloper? The link appears to be going nowhere.

we heard that people sometime are having problems that are usually solved by trying again a little later.
Another option that might work is to add -west to the server name so it will become download-west.oracle.com

Problem with Oracle.Data.Access

Hi everybody,
this is my problem, I've developed a web application witch .net 2005 (c#) and oracle client 10.
Now I need to compile all my application with oracle client 9, then I have removed client 10 and installed client 9.
But this is the problem, in References of my project I can't find Oracle.DataAccess.dll ! then I can't compile my project!
In previous installation (with client 10) the dll was located here
C:\oracle\product\10.2.0\client_1\bin\
the direcotry installation of client 9 is the same but I can't find it on my pc...
How can I switch to client 9 from client 10 without rewrite all code??
thank so much!!!!
Sergio

Ok now I have the following situation...
I've downloaded and installed this version ODAC92070.exe and I can find the file
C:\oracle\ora92\bin\Oracle.DataAccess.dll ...
In my reverence in visual studio2005 I delete the old file and I load the new, but qhen I try to compile this error appears
'Oracle.DataAccess.Client.OracleDataReader' does not contain a definition for 'HasRows'
why??
this method is not supported in oracle client 9?

Download problems with Oracle 9i

Similar Messages

Maybe you are looking for