Downloaded acrobat reader 11 onto my Mac Book Pro, it can open the file but will not print. Get a message that says PDF cannot be printed, however, I forwarded it to someone else and they could print it, no problem. I called HP and spent an 1hour with the
downloaded acrobat reader 11 onto my Mac Book Pro, it can open the file but will not print. Get a message that says PDF cannot be printed, however, I forwarded it to someone else and they could print it, no problem. I called HP and spent an 1hour with them and then called Apple support and worked with them for 3 hours. No one can figure it out. Is there something wrong with this version? the pdf was created in 2004. Do I have to pay to get Acrobat?
Let me give you a slightly different perspective than everyone else here. You are using an unsecured wireless network, which means that all your network traffic is easily available for viewing by anyone else using that network. That's bad. Very bad, for you, unless you absolutely trust everyone who lives within range of this network. So stop doing it.
As to the Mac not connecting, wireless networking is simply too complex for any reasonable answer without more information. There are many possible error points, and as often as not it's the Mac that can connect and the Windows PC that cannot. Since you can't give us any information about the configuration of the neighbor's network, and can't make any changes to it, we can't do much to help you troubleshoot it.
Similar Messages
-
When starting Final Cut Pro 7.0.3 I am all of a sudden getting a message that says "One or more of the scratch disks don't have read/ write access" and now the app won't operate - how do I fix this so I can use Final Cut Pro?
Glad you found the answer. But something seems wrong. FCP should be able to assign the scratch disk to your startup drive. It's not advisable, but it should be possible. You might want to try and figure out what's going on before what ever's going on cause other problems.
-
When I plug my iPhone into my computer to sync my iTunes I get a message that says "iTunes cannot read the content of the iPhone" and wants me to restore my phone back to factory settings. Any suggestions so that I don't have to restore? I have all of my stuff backed up on iCloud but I really don't want to go through the hassle of wiping it clean and putting everything back on.
This is a post from a user named edgar999 and it worked PERFECTLY:
"OK - this is how it works:
In order to backup from iCloud you cannot use iTunes!
Therefore disconnect your device from your computer.
Turn on your device and go to Settings and then go to General.
At the bottom of this submenu there is a buttom "Reset"
If you push that buttom you see 6 different Erase settings to chose from!
Chose "Erase All Content and Settings" because this will wipe everything from your device and will let you restore from iCloud! (I tried the top "Reset All Settings" but that did not let me use iClouds afterwards!)
Once you pushed that buttom your device will be wiped clean and after some time you will see the Device Welcome Screen like on a new device!
After choosing your location you will be asked to setup your WiFi-conection. After you joint to your Wifi you will be given the choice to restore the iPad from a backup from the iCloud. Choosing this backup will prompt you with your apple ID and password.
Restoring from a backup can take some time. The process uses your Wi-Fi connection to download settings, content and data. If you had a lot of content on your device, this can take a while. The restore screen should give you estimates at each stage of the restore process, starting with restoring the settings and then booting into the iPad. When the iPad home screen appears, the device will continue the restore process by downloading all of your applications.
If you are restoring from a backup because you have run into problems with your device that can only be solved by restoring it, you can first choose your latest backup. If you still have problems, you can move on to the next latest backup, repeating the process until (hopefully) the problem is cleared."
THANK YOU edgar999!!!! -
When I try to install the update"MAC OS X Update Combined, I get a message that says it cannot be saved & connection reset by peer. What do I need to do to get this update installed. I just purchased my first iMAC and don't know anything about it.
Try here:
http://support.apple.com/kb/DL1524 -
I got an iTunes card as a gift and when I enter the code to redeem it I get a message that says "the code you entered has not been properly activated. Please contact iTunes..." Please advice.
what did itunes say when you contacted them?
-
I'm getting a message that says itunes cannot run b/c some required files are missing. Please reinstall itunes. I'm scared to because I don't want to lose my music.
Reinstalling iTunes simply replaces the application. It shouldn't affect your media. You do have backups, right?
-
I keep getting a message that says my computer is associated with an APPLE ID?? That I can download previous purchases again in 82 days with a different ID? I don't understand why it wont allow me to download previous purchases?? I never had this problem before the 10.5 update. I have emailed their help panel numerious times and they never do anything that remedies the problem?? I only have one computer and one ID I just dont understand what the problem is. I use a 3G connection to download music and sometimes the songs are not completely downloaded too and when I cant redownload them its like a waste of money.. I am so discouraged!!! Has any of you had this problem or know what I can do to fix this problem?? Thanks!!!
Hi Bander Bunny!
I have a couple of articles that should be able to help you troubleshoot this issue a little further. You may want to try uninstalling and reinstalling iTunes first. This has to be done in a specific manner, and this article can help you do that:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/ht1923
Another option is that you may want to try syncing your iPod nano manually. Here's is an article that pertains to manually managing the content of your iPod nano:
Managing content manually on iPhone, iPad, and iPod
http://support.apple.com/kb/ht1535
It's also possible that this issue resides with your iPod nano. Here is a website that will help you troubleshoot the iPod nano:
Apple - Support - iPod Troubleshooting Assistants
http://www.apple.com/support/ipod/five_rs/
Thanks for using the Apple Support Communities. Have a good one!
-Braden -
When I try to access my purchased books in iBooks, I get a message that says "Cannot connect to iTunes Store." However, if I go into iTunes, I can connect right up. Why will it not let me see my purchased books in iBooks?
I'm having a similar problem...but mine results from an OS upgrade from 10.6.4 to 10.8.5.
Where did you access a clean copy of Java SE 6? The link at adobe for archicval plug-ins is a dead download (and it doesn't appear to contain Java SE 6.).
Jerry -
Is anyone else getting an error message from Windows Installer that says it cannot find the correct path to install ITunes 10.5?? Or when trying to install it, it says that the older version cannot be removed?? I NEED HELP!! I want to upgrade my phone to iOS 5 and cannot without iTunes 10.5!
i think im getting this problem! ive got loadz of windows updates that wont update and i seen somewhere that that has something to do with why itunes wont download properly:/
-
No matter what I do I get a message that I can't connect to the iTunes store & I can't update apps. What do I do? I used both wifi and the cell network.
IF you are not able to resolve your issue then contact Apple Support at https://getsupport.apple.com/GetproductgroupList.do?caller=ikb&PRKEYS=PL220,1316 29,PL113,PL302,PF3,PF4,PF9,PL303,PL339,p…
hopefully they can help. You may also be interested to know that for some reason it is just not available to a lot of people at the same time. Appears to be an issue of more users than their servers can handle. Has happened periodically for at least 6 months that I know of but apparently users are able to use within several days if there are no other issues with the users device. -
I attempted to down load the 5 and 6 version at separate times. Both times I got an error message that stated I did not have permission to install the program. I own the computer and am the sole user. I am working on a Macbook Air. I have never encountered this issue before when updating Firefox. I am presently using the 3.5.6 edition and some of my sites are not supporting that edition anymore. Can you tell me what this error message means? I also have not been receiving the update messages for the new editions of Firefox.
If you have problems with updating or with the permissions then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
Download a new copy of the Firefox program and save the DMG file to the desktop
* Firefox 5.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Trash the current Firefox application to do a clean (re-)install
* Install the new version that you have downloaded
Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data. -
I do not know much about add-ons so I don't know how to get around this without losing McAfee Site Advisor.
See McAfee for an updated version of that Site Advisor add-on. Hopefully they have it completed, as they have been promising it for the 3rd week of July ever since Firefox 5.0 was released on June 21.
-
I have reinstalled i-tunes after getting error messsages when I downloaded the new software. Nor I get a message that says" Serice (Apple Mobile Device) failed to start. Verify that you have sufficient priveledges to start system services. What do I do now
Hi annibu757,
If you are having issues with iTunes after an attempted update, you may find the following article helpful:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Regards,
- Brenden -
I have a Dell Photo 964 printer and want to know how to down load it onto my Mac Book Pro
I have a Dell Photo 964 printer and want to know how to download it onto my Mac Book Pro.
Does anyone know how to do this? Jane 96Hi Jane...
Go to the Dell website and download the drivers (software) for Mac O S X 10.7 for the 964 model.
Then open System Preferences > Print & Scan > Print
Click + to add the printer. -
I have just downloaded a trial version of Photoshop Elements onto my Mac Book Pro (10.9.4). The installation to my hard drive went fine so I attempted to use Elements on an existing Photoshop file. I did not see the Elements option in my filter menu and am uncertain as to how to "add" the Elemnts to my existing filter choices. Please advise.
I'm sorry but it's very hard to understand what you mean. What filter menu? In which program? Do you mean you're trying to use PSE as an external editor with some other asset management program? Which one?
Maybe you are looking for
-
i have a 80gb classic and it just stopped working all of a sudden. When i turn it on all it does is go to the apple logo and turn off. When i try to connect it to my computer it doesnt reconize it. what should i do. Please help
-
Portal server question, pls help!
Hello, I have Portal server 5.04 installed in my local PC. It works well until I modified LoginActions.xml file. After I changed LoginActions.xml, I could not login to portal any more and got "The server has experienced an error. Try again, or contac
-
Audio Console: Unable to find Audio device
I'm running Vista 32-bit with SP with an Audigy Gamer. I've been running the same drivers since March, but somewhere down the road Creative Audio Console refused to run anymore when it previously worked fine. I get the following error:? "Unable to fi
-
Now that the JCV GY-HM100U is available, has any one used it with FCE? Are the Quicktime .mov files drag and drop in FCE? I would like to upgrade my camera, and have been going back and forth between the Canon XH-A1 and JVC HM100U and really like the
-
i am haeing a general poblem i don't know why. when i try and install the software quick time from one site it automatically starts installing it. but then nothing is happening. I tried to search the other sources and read some aticles on the interne