Downloaded current ipod updater? check. but can't get it to work.
(I apologize in advance if this has already been addressed/answered.)
I've downloaded the most recent update for ipod, it's installed in my computer but I can't get it to run. It always prompts me to restart my computer, which I do...then nothing. It's this constant cycle of trying to get the update to run and nothing works. Also, I've noticed my computer runs really slow and keeps freezing while I attempt to do this - I don't know if that's related.
2. I can't get my computer to recognize my iPod. I've tried ALL (and I do mean all of them...repeatedly!) of the steps the website offered (try a different USB port etc., rename the disk drive -- only problem being the computer doesn't recognize the F drive or whatever is associated with my ipod) plus some of the tips offered on this forum (there are some really helpful & knowledgeable folks here!) and nothing.
It's driving me insane. As much as I try and solve it myself, I'm starting to get really confused.
Can someone help a girl out?
-Mary
Ipod version 3.1 - guess that means 3rd generation? Windows XP
Windows XP
Anyone?
Similar Messages
-
2nd Hand iPod just purchased but can't get it to work on PC - help!?
I have just purchased a 2nd hand Ipod Nano 4GB 3rd generation. It is loaded with a 1000 songs but I would like to remove some of them and add my own. When I connect it to my PC, it comes up but everything is greyed out. Does this mean I can't do anything with it except listen to whats on there? Any help would be appreciated. Thanks
They don't make an OS X version of their software.
-
HT1848 I just downloaded music on my computer but can't get it to synch with my ipad.
I just download music to my computer, but can't get it to synch with my ipad. Does anyone have a suggestion?
iOS: Syncing with iTunes - Support - Apple
-
Has anyone used reMIDI as a plug-in for Garageband ('08)? The program allows MIDI instruments to be strummed or arpegiated. I have a trial version, but can't get it to work in Garageband. Wonder how to set it up.
Thanks, Doctor MarkPort Forwarding.....or Port Mapping....as Apple calls it is a difficult and complex configuration method for most users. Because there are so many variables involved in this type of setup, it is not possible to provide a step by step guide that will work for everyone with all devices.
It is possible that a setup guide exists for the the WD drive and AirPort Extreme, but you will have to go looking for it on the Internet. Even if you find one, it may not be tailored to your specific situation or needs.
Sometimes, you can do everything right....at least according to someone's article or "how to" guide, and things still will not work correctly.
In situations like this, when you really don't know what to do, you need to enlist the aid of an IT pro, who will know what to do based on your particular products and unique circumstances. Sometimes....they won't be able to get things working either due to particular circumstances.
But, before you do this, I would strongly recommend that you use a Static IP address for your Internet connection with your ISP. If you do not have this now, contact them to ask them if they offer this type of connection. Expect to pay more for this type of service, of course. -
got my password wrong twice and my mini is disable. I connected to iTunes, but can't get it to work. Can some one guide my through?
If it's showing the red disabled screen due to incorrect passcodes then you may need to put the iPad into recovery mode : http://support.apple.com/kb/ht1808 - you should then be able to reset the iPad via your computer's iTunes and restore/resync your content to it
-
Trying to connect 2010 Mac mini to alba hd tv but can't get it to work, any theories?
Trying to connect 2010 Mac mini to alba hd tv but can't get it to work, any theories?
Welcome to the Apple Community.
The iPad 1 is only able to do basic AirPlay, many providers of programming have blocked their apps from working with AirPlay. -
i have all my music under my user id. i would like for my wife to have access under her user id. i tried using Home Sharing but can't get it to work.
http://support.apple.com/kb/HT3819 homesharing
http://support.apple.com/kb/TS2972 troubleshooting home sharing.
i <3 Homesharing. I enabled it at home, and where I work I use a mac so I enabled it on that computer as well so I can listen to my own music library while on breaks/lunch =) -
Just got photoshop CC but can't get 3D to work. Any help greatly appreciated.
Just got photoshop CC but can't get 3D to work. Any help greatly appreciated.
Do you have a video card with at least 512 MB of vRAM?
I only have 256 MB vRAM on my older iMac and still have 3D capability in PS CS5, but not in PS CC. The newer versions of PS require 512 MB in order to enable 3D. -
I have photoshop cs6 extended but can't get 3d to work. how do I fix it?
I have photoshop cs6 extended but can't get 3d to work. how do I fix it?
on a mac btw
-
HT4528 just bought a ringtone app but can not get it to work
just bought a ringtone app but can not get it to work, I can get to putting on my desktop but after that it wont tranfer to my "tones"
AngelaContact the app developer for support.
-
Excellent tutorial but can't get it to work
Hello
Hope someone can help. I've ben looking for a good calendar
nugget since the demise of mxKalendar
The adobe tutorial on blogs has an excellent example of a
nugget
http://www.adobe.com/devnet/dreamweaver/articles/php_blog3_03.html
but I can't get it to work
It gives a parameter error on the page month forward function
$calendar .="<td><a
href=day.php?m=$mn2&y=$yn2&d=$day>></a></td></tr>";
Has anyone been able to get it to work?
Any help/guidance appreciated
ThanksCliveHave you compared your code to the code in the example files?
http://www.adobe.com/devnet/dreamweaver/articles/php_blog3.html
http://download.macromedia.com/pub/developer/blog3_sample.zip
Ken Ford
Adobe Community Expert - Dreamweaver
Fordwebs, LLC
http://www.fordwebs.com
"Clive" <[email protected]> wrote in message
news:fruiu3$7u4$[email protected]..
> Hello
> Hope someone can help. I've ben looking for a good
calendar nugget since
> the
> demise of mxKalendar
> The adobe tutorial on blogs has an excellent example of
a nugget
>
http://www.adobe.com/devnet/dreamweaver/articles/php_blog3_03.html
> but I can't get it to work
>
> It gives a parameter error on the page month forward
function
>
> $calendar .="<td><a
href=day.php?m=$mn2&y=$yn2&d=$day>></a></td></tr>";
>
> Has anyone been able to get it to work?
> Any help/guidance appreciated
> ThanksClive
>
> -
I downloaded a new version of pages but can't get it to work?
I had an older Iwork 06 on the computer, but can't find serial number. I downloaded newest version of Pages, but computer keeps defaulting to the old version and asking for a serial number. Help? Thanks!
First, open Finder, go to Applications folder and delete iWork '06. Then, open Pages and it will use the most recent version
-
download new software update now have trouble
Download the demo and activate with your serial number:
http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html
Be sure to follow the special instructions.
You will also probably need to run the un-installer first to clean up the old files. -
I'm moderately competent, but can't get exchange to work with the 2 upgrade
My original iPod touch synced perfectly with my Outlook 2003 at work, both contacts and calendar until I updated to 2.0 to enable downloading applications. Now I get the "OutlookSyncClient.exe has encountered an error and must close." Error. I have tried all fixes and will have to move on, unfortunately, unless there’s a fix out there.
This is a corporate email/calendar and I can’t change every entry. It also involves Microsoft exchange, so I’m not sure how the .pst file is involved. Nevertheless. I have tried all the fixes that I can and nothing works. This device has been worthless for the last six months. Clearly something is wrong. I have tried many different computers networked to my account to try and diagnose this. Nothing works.
Any ideas? Anyone?Hello, sorry to see you are running into this today. Below are some suggestions.
Have you tried uninstalling the following Apple Applications in the following order? After you have done that check out the following directory below.
1. Uninstall the following Apple Software in the following order to help reduce reboots
-Apple Mobile Device Support
-Apple Software Update
-Bonjour
-Windows iPod Updater (Name might be different but look for anything with the word iPod)
-MobileME Control Panel
-Quicktime
-iTunes
*Now reboot the computer
*Once PC is back up and running, then go ahead and go to C:/Program Files/Common Files
In this folder if you see an Apple folder. Delete this folder. Reboot one last time. Then download and install latest iTunes
http://www.apple.com/itunes/download/
*Post back as needed. -
Upgraded to Mavericks and installed new iphoto but can't get iphoto to work
I have not been able to open my iphoto library with the current version after installing Mavericks and purchasing/installing iphoto 9.5
Here's the system info: iMac (from Dec. 2007)
2.8 GHz Core duo
4 GB SDRAM
OS X 10.9.1 (as of yesterday)
Iphoto 08 (7.1.5) lived on a network drive ( Lacie cloud drive) shared between a pc and a mac.
Upgraded to 9.5 yesterday
I used time machine backup before installing Mavericks and proceeded to try to upgrade iphoto. However, I did not make a backup of my system after this installation and before I installed the new iphoto. Does Time machine backup iphoto files located on a network drive? Does it matter that the backup was made with snow leopard and not Mavericks?
I followed instructions on a thread indicating that iphoto Library upgrader 1.1 should be used to prepare my old library prior to opening with iphoto 9.5.
When I double-clicked the upgrader it gave me this message:
Your library can open with the current version of iPhoto and does not need to be prepared with this tool.
I noticed that the iphoto icon has already changed from orange to blue.
OK- great! So I go to the freshly installed iphoto and try to open my library and get this message:
The photo library needs to be upgraded to work with this version of iPhoto.
Your photo library will not be readable by previous versions of iPhoto after the upgrade. The upgrade process for very large libraries may take an hour or more to complete.
Alright, so I click the upgrade button and I get the beachball of death for about 15 minutes and then see a message that says:
Examining photo library- Examining with the beachball of death goes on for another 10 minutes and then iphoto just crashes and closes.
Back to searching through threads- Ah- try option + cmd while opening iphoto to rebuild the database but then get this message AGAIN:
The photo library needs to be upgraded to work with this version of iPhoto.
Your photo library will not be readable by previous versions of iPhoto after the upgrade. The upgrade process for very large libraries may take an hour or more to complete.
And so, the cycle continues....
After reading through a few other discussion I discovered that the iphoto library should have been on a drive formated as Mac OS extended (journaled)
So- I format an external harddrive as Mac OS extended (journaled) and proceed to copy the iphoto library (234 GB) onto the external harddrive and after about 30 minutes I received this message:
The operation can’t be completed because an item with the name “iPhoto Library” already exists. I click OK and everything stops and shuts down.
Is it possible to get rid of Mavericks and go back to my original iphoto 08 using the time machine backup? If so, should I then use the upgrader before installing Mavericks and the new iphoto?
At this point I have no clue how to proceed. I am trying not to panic but this process is starting to drive me a little bananas and my brain is slowly, but surely, melting away.
Please help save my sanity. Please.
Thank you.The problem is the library has been damaged from sitting on the Network Drive, and frankly, returning to the old OS won't change anything, nor will downgrading iPhoto. You're going to have this issue once you try and move the Library, or update it in any way, and - even if you stick with the old version of iPhoto, you're going to start having issues just saving edits, sharing and so on.
So, you're between a rock and a hard place.
I've no idea if TM backs up material on a NAS, but I do know that it can be set to back up externald rives. I'm somewhat surprised that you don't know, as this is your back up system that you created and the easiest route out of this situation. NOw there's only one way to find out.
So, my first effort would be to try restore the Library from TM to the correctly formatted drive:
http://support.apple.com/kb/HT4927?viewlocale=en_US&locale=en_US
will help with that.
If that doesn't work or is not possible, your next effort is to try rebuild the Library to the correctly formatted drive:
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
If that doesn't work, then you're recovering the masters from the Library and starting over from scratch.
Maybe you are looking for
-
Transfer of customer and vendor open items available? (like asset transfer)
Hello, May I ask you about your opinion. In SAP we have functionality to transfer assets from burks"A" to bukrs "B". Do we also have this functionality for customer and vendor open items? Thank you for your opinion and expertise. all the best Erwin
-
Hi, I have a query over Flash Builder premium license. Consider a situation that I have flash builder premium license to build automation compatible Flex application and later I redistribute those SWF files to customers. If customer, doesn't posses t
-
Can any one let me know the Sales Scheduling Agreement process. Thanks, Narsimha Reddy
-
The script was originaly recorded using IE-9, so do I need to re-record using IE-11. Eventhough I re-record it using IE-11 will it actually use IE11 as there is no IE11 option in OLT.
-
How can I delete the area which I have selected with Pen Tool?
Hi, I have selected the particular area of my background image, which is just complicated. Now, I would like to delete the selection so that I will copy something else in that blank area. How can I delete the selected area? Thanks.